Previously, dst side will immediately try to lock the write byte upon
receiving QEMU_VM_EOF, but at src side, bdrv_inactivate_all() is only
done after sending it. If the src host is under load, dst may fail to
acquire the lock due to racing with the src unlocking it.
Fix this by hoisting the bdrv_inactivate_all() operation before
QEMU_VM_EOF.
N.B. A further improvement could possibly be done to cleanly handover
locks between src and dst, so that there is no window where a third QEMU
could steal the locks and prevent src and dst from running.
N.B. This commit includes a minor improvement to the error handling
by using qemu_file_set_error().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170616160658.32290-1-famz@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[PMM: noted qemu_file_set_error() use in commit as suggested by Daniel]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the more common pattern to error out.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-6-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Alternates with both a 'number' and an 'int' branch will become
invalid when the next patch merges of QFloat and QInt into QNum.
More sophisticated alternate code could keep them valid, but since
we have no users outside tests, simply drop the tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If the property is not of the requested type, the getters will leak a
QObject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove dependency on qapi qtype, replace a field by a few PropertyInfo
callbacks to set the default value type (introduced in commit 4f2d3d7).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-2-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit e987c37aee ("hw/i386: check if
nvdimm is enabled before plugging") introduced a check to reject nvdimm
hotplug if -machine pc,nvdimm=on was not given.
This check executes after pc_dimm_memory_plug() has already completed
and does not reverse the effect of this function in the case of failure.
Perform the check before calling pc_dimm_memory_plug(). This fixes the
following abort:
$ qemu -M accel=kvm -m 1G,slots=4,maxmem=8G \
-object memory-backend-file,id=mem1,share=on,mem-path=nvdimm.dat,size=1G
(qemu) device_add nvdimm,memdev=mem1
nvdimm is not enabled: missing 'nvdimm' in '-M'
(qemu) device_add nvdimm,memdev=mem1
Core dumped
The backtrace is:
#0 0x00007fffdb5b191f in raise () at /lib64/libc.so.6
#1 0x00007fffdb5b351a in abort () at /lib64/libc.so.6
#2 0x00007fffdb5a9da7 in __assert_fail_base () at /lib64/libc.so.6
#3 0x00007fffdb5a9e52 in () at /lib64/libc.so.6
#4 0x000055555577a5fa in qemu_ram_set_idstr (new_block=0x555556747a00, name=<optimized out>, dev=dev@entry=0x555556705590) at qemu/exec.c:1709
#5 0x0000555555a0fe86 in vmstate_register_ram (mr=mr@entry=0x55555673a0e0, dev=dev@entry=0x555556705590) at migration/savevm.c:2293
#6 0x0000555555965088 in pc_dimm_memory_plug (dev=dev@entry=0x555556705590, hpms=hpms@entry=0x5555566bb0e0, mr=mr@entry=0x555556705630, align=<optimized out>, errp=errp@entry=0x7fffffffc660)
at hw/mem/pc-dimm.c:110
#7 0x000055555581d89b in pc_dimm_plug (errp=0x7fffffffc6c0, dev=0x555556705590, hotplug_dev=<optimized out>) at qemu/hw/i386/pc.c:1713
#8 0x000055555581d89b in pc_machine_device_plug_cb (hotplug_dev=<optimized out>, dev=0x555556705590, errp=0x7fffffffc6c0) at qemu/hw/i386/pc.c:2004
#9 0x0000555555914da6 in device_set_realized (obj=<optimized out>, value=<optimized out>, errp=0x7fffffffc7e8) at hw/core/qdev.c:926
Cc: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the memcpy upper into where needed, then share the trace so that we
trace every correct remapping.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
First, let vtd_do_iommu_translate() return a status, so that we
explicitly knows whether error occured. Meanwhile, we make sure that
IOMMUTLBEntry is filled in in that.
Then, cleanup vtd_iommu_translate a bit. So even with PT we'll get a log
now. Also, remove useless assignments.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have converted many of the DPRINTF() into traces. This patch does the
last 100+ ones.
To debug VT-d when error happens, let's try enable:
-trace enable="vtd_err*"
This should works just like the old GENERAL but of course better, since
we don't need to recompile.
Similar rules apply to the other modules. I was trying to make the
prefix good enough for sub-module debugging.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These checks verify that the guest RAM turns from read-write to
"blackhole" when crossing the low boundary of the TSEG. Both the standard
1MB/2MB/8MB TSEG sizes and an extended (16MB) TSEG size are tested.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A test program can start up QEMU several times, with different command
lines. For such cases, qtest_start() and qtest_end() are called from
within the individual test functions. Examples: "virtio-console-test.c",
"numa-test.c", and many others.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The q35 machine type currently lets the guest firmware select a 1MB, 2MB
or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even
that is not enough when a lot of VCPUs (more than approx. 224) are
configured -- SMRAM footprint scales largely proportionally with VCPU
count.
Introduce a new property for "mch" called "extended-tseg-mbytes", which
expresses (in megabytes) the user's choice of TSEG (SMRAM) size.
Invent a new, QEMU-specific register in the config space of the DRAM
Controller, at offset 0x50, in order to allow guest firmware to query the
TSEG (SMRAM) size.
According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller
Register Address Map (D0:F0)":
Warning: Address locations that are not listed are considered Intel
Reserved registers locations. Reads to Reserved registers may
return non-zero values. Writes to reserved locations may
cause system failures.
All registers that are defined in the PCI 2.3 specification,
but are not necessary or implemented in this component are
simply not included in this document. The
reserved/unimplemented space in the PCI configuration header
space is not documented as such in this summary.
Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part
of the standard PCI config space header. And they precede the capability
list as well, which starts at 0xe0 for this device.
When the guest writes value 0xffff to this register, the value that can be
read back is that of "mch.extended-tseg-mbytes" -- unless it remains
0xffff. The guest is required to write 0xffff first (as opposed to a
read-only register) because PCI config space is generally not cleared on
QEMU reset, and after S3 resume or reboot, new guest firmware running on
old QEMU could read a guest OS-injected value from this register.
After reading the available "extended" TSEG size, the guest firmware may
actually request that TSEG size by writing pattern 11b to the ESMRAMC
register's TSEG_SZ bit-field. (The Intel spec referenced above defines
only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.)
On the QEMU command line, the value can be set with
-global mch.extended-tseg-mbytes=N
The default value for 2.10+ q35 machine types is 16. The value is limited
to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be
stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users
are responsible for choosing sensible TSEG sizes.
On 2.9 and earlier q35 machine types, the default value is 0. This lets
the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50,
keep their original behavior.
When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is
set to that value on reset, for completeness.
PCI config space is migrated automatically, so no VMSD changes are
necessary.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027
Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I'm not trying too hard yet. Later, with multiqueue support,
this may cause mutex contention or cacheline bouncing.
Cc: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-20-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
block_acct_destroy is called unconditionally in blk_delete, but there is
no BlockAcctStats function that is called unconditionally in blk_new.
Split block_acct_init in two, so that it will be possible to create a
QemuMutex in block_acct_init and destroy it in block_acct_cleanup.
Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-19-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is the common code to account operations that produced actual I/O.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-18-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Any data that is returned by read may be stale already, the bitmap
has to be cleared before issuing the read.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-16-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This module provides fast paths for 64-bit atomic operations on machines
that only have 32-bit atomic access.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170605123908.18777-11-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Another possibility is to use tg->lock, which we're holding anyway in
both schedule_next_request and throttle_group_co_io_limits_intercept.
This would require open-coding the CoQueue however, so I've chosen this
alternative.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-10-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Prepare for removing this function; always restart throttled requests
from coroutine context. This will matter when restarting throttled
requests will have to acquire a CoMutex.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-9-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Starting all waiting coroutines from bdrv_drain_all is unnecessary;
throttle_group_co_io_limits_intercept calls schedule_next_request as
soon as the coroutine restarts, which in turn will restart the next
request if possible.
If we only start the first request and let the coroutines dance from
there the code is simpler and there is more reuse between
throttle_group_config, throttle_group_restart_blk and timer_cb. The
next patch will benefit from this.
We also stop accessing from throttle_group_restart_blk the
blkp->throttled_reqs CoQueues even when there was no
attached throttling group. This worked but is not pretty.
The only thing that can interrupt the dance is the QEMU_CLOCK_VIRTUAL
timer when switching from one block device to the next, because the
timer is set to "now + 1" but QEMU_CLOCK_VIRTUAL might not be running.
Set that timer to point in the present ("now") rather than the future
and things work.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently there are warnings about flex and bison being missing when
building in the centos6 image:
make[1]: flex: Command not found
BISON dtc-parser.tab.c
make[1]: bison: Command not found
Add them.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170524005206.31916-1-famz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
It is used by qemu-iotests.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-3-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We've used --add-current-user to create a user in the image, use it to
run tests, because root has too much priviledge, and can surprise test
cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170505032340.26467-2-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This commit introduces a vhost-user-scsi backend sample application. It
must be linked with libiscsi and libvhost-user.
To use it, compile with:
$ make vhost-user-scsi
And run as follows:
$ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/
$ qemu-system-x86_64 --enable-kvm -m 512 \
-object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \
-numa node,memdev=mem \
-chardev socket,id=vhost-user-scsi,path=vus.sock \
-device vhost-user-scsi-pci,chardev=vhost-user-scsi \
The application is currently limited at one LUN only and it processes
requests synchronously (therefore only achieving QD1). The purpose of
the code is to show how a backend can be implemented and to test the
vhost-user-scsi Qemu implementation.
If a different instance of this vhost-user-scsi application is executed
at a remote host, a VM can be live migrated to such a host.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.
To use it, start Qemu with a command line equivalent to:
qemu-system-x86_64 \
-chardev socket,id=vus0,path=/tmp/vus.sock \
-device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...
A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is for the future interoperability & management guide. It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are defined in config-target.h and thus should never be
used in common code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1497468113-2874-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we've got some new CPU targets in QEMU during the last months
and years, we've got some new TARGET_xxx defines now which should
be marked as poisoned for common code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1497468113-2874-2-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- do not use 'goto error_reply' outside a switch to jump into the
middle of the switch's default case label
- reduce code duplication
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170602150150.258222-13-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For consistency use 'ret' name for saving return code everywhere
in the file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170602150150.258222-12-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"goto fail" error handling scheme is not needed for just returning
error code. Better is return it immediately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170602150150.258222-11-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current code will return 0 on this nbd_write fail, as rc is 0
after successful nbd_negotiate_options. Fix this.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170602150150.258222-10-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"co" field of NBDClientNewData has never been used, all the way back to
its declaration in commit 1a6245a5. So let's just use client pointer
instead of extra structure.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170602150150.258222-9-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
