Commit Graph

126 Commits

Author SHA1 Message Date
Daniel P. Berrange 3bd18890ca crypto: make PBKDF iterations configurable for LUKS format
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-19 16:30:45 +01:00
Daniel P. Berrange 59b060be18 crypto: use uint64_t for pbkdf iteration count parameters
The qcrypto_pbkdf_count_iters method uses a 64 bit int
but then checks its value against INT32_MAX before
returning it. This bounds check is premature, because
the calling code may well scale the iteration count
by some value. It is thus better to return a 64-bit
integer and let the caller do range checking.

For consistency the qcrypto_pbkdf method is also changed
to accept a 64bit int, though this is somewhat academic
since nettle is limited to taking an 'int' while gcrypt
is limited to taking a 'long int'.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-19 16:30:42 +01:00
Daniel P. Berrange 90d6f60d07 crypto: report enum strings instead of values in errors
Several error messages print out the raw enum value, which
is less than helpful to users, as these values are not
documented, nor stable across QEMU releases. Switch to use
the enum string instead.

The nettle impl also had two typos where it mistakenly
said "algorithm" instead of "mode", and actually reported
the algorithm value too.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-12 12:00:52 +01:00
Gonglei d9269b274a crypto: fix building complaint
gnutls commit 846753877d renamed LIBGNUTLS_VERSION_NUMBER to GNUTLS_VERSION_NUMBER.
If using gnutls before that verion, we'll get the below warning:
crypto/tlscredsx509.c:618:5: warning: "GNUTLS_VERSION_NUMBER" is not defined

Because gnutls 3.x still defines LIBGNUTLS_VERSION_NUMBER for back compat, Let's
use LIBGNUTLS_VERSION_NUMBER instead of GNUTLS_VERSION_NUMBER to fix building
complaint.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-12 12:00:52 +01:00
Daniel P. Berrange a5d2f44d0d crypto: ensure XTS is only used with ciphers with 16 byte blocks
The XTS cipher mode needs to be used with a cipher which has
a block size of 16 bytes. If a mis-matching block size is used,
the code will either corrupt memory beyond the IV array, or
not fully encrypt/decrypt the IV.

This fixes a memory corruption crash when attempting to use
cast5-128 with xts, since the former has an 8 byte block size.

A test case is added to ensure the cipher creation fails with
such an invalid combination.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-12 12:00:06 +01:00
Laurent Vivier e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Daniel P. Berrange 40c8502822 crypto: add support for querying parameters for block encryption
When creating new block encryption volumes, we accept a list of
parameters to control the formatting process. It is useful to
be able to query what those parameters were for existing block
devices. Add a qcrypto_block_get_info() method which returns a
QCryptoBlockInfo instance to report this data.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-2-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-26 17:46:37 +02:00
Daniel P. Berrange 7603289712 crypto: don't open-code qcrypto_hash_supports
Call the existing qcrypto_hash_supports method from
qcrypto_hash_bytesv instead of open-coding it again.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-21 10:46:27 +01:00
Daniel P. Berrange 2165477c0f crypto: use glib as fallback for hash algorithm
GLib >= 2.16 provides GChecksum API which is good enough
for md5, sha1, sha256 and sha512. Use this as a final
fallback if neither nettle or gcrypt are available. This
lets us remove the stub hash impl, and so callers can
be sure those 4 algs are always available at compile
time. They may still be disabled at runtime, so a check
for qcrypto_hash_supports() is still best practice to
report good error messages.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-21 10:46:27 +01:00
Daniel P. Berrange f3c8355c7a crypto: use /dev/[u]random as a final fallback random source
If neither gcrypt or gnutls are available to provide a
cryptographic random number generator, fallback to consuming
bytes directly from /dev/[u]random.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-21 10:46:27 +01:00
Markus Armbruster 2a6a4076e1 Clean up ill-advised or unusual header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Markus Armbruster a9c94277f0 Use #include "..." for our own headers, <...> for others
Tracked down with an ugly, brittle and probably buggy Perl script.

Also move includes converted to <...> up so they get included before
ours where that's obviously okay.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Daniel P. Berrange a1c5e949dd crypto: allow default TLS priority to be chosen at build time
Modern gnutls can use a global config file to control the
crypto priority settings for TLS connections. For example
the priority string "@SYSTEM" instructs gnutls to find the
priority setting named "SYSTEM" in the global config file.

Latest gnutls GIT codebase gained the ability to reference
multiple priority strings in the config file, with the first
one that is found to existing winning. This means it is now
possible to configure QEMU out of the box with a default
priority of "@QEMU,SYSTEM", which says to look for the
settings "QEMU" first, and if not found, use the "SYSTEM"
settings.

To make use of this facility, we introduce the ability to
set the QEMU default priority at build time via a new
configure argument.  It is anticipated that distro vendors
will set this when building QEMU to a suitable value for
use with distro crypto policy setup. eg current Fedora
would run

 ./configure --tls-priority=@SYSTEM

while future Fedora would run

 ./configure --tls-priority=@QEMU,SYSTEM

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-04 15:53:19 +01:00
Daniel P. Berrange 13f12430d4 crypto: add support for TLS priority string override
The gnutls default priority is either "NORMAL" (most historical
versions of gnutls) which is a built-in label in gnutls code,
or "@SYSTEM" (latest gnutls on Fedora at least) which refers
to an admin customizable entry in a gnutls config file.

Regardless of which default is used by a distro, they are both
global defaults applying to all applications using gnutls. If
a single application on the system needs to use a weaker set
of crypto priorities, this potentially forces the weakness onto
all applications. Or conversely if a single application wants a
strong default than all others, it can't do this via the global
config file.

This adds an extra parameter to the tls credential object which
allows the mgmt app / user to explicitly provide a priority
string to QEMU when configuring TLS.

For example, to use the "NORMAL" priority, but disable SSL 3.0
one can now configure QEMU thus:

  $QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
                priority="NORMAL:-VERS-SSL3.0" \
        ..other args...

If creating tls-creds-anon, whatever priority the user specifies
will always have "+ANON-DH" appended to it, since that's mandatory
to make the anonymous credentials work.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-04 15:52:43 +01:00
Daniel P. Berrange 9164b89762 crypto: implement sha224, sha384, sha512 and ripemd160 hashes
Wire up the nettle and gcrypt hash backends so that they can
support the sha224, sha384, sha512 and ripemd160 hash algorithms.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-04 15:52:36 +01:00
Daniel P. Berrange 0c16c056a4 crypto: switch hash code to use nettle/gcrypt directly
Currently the internal hash code is using the gnutls hash APIs.
GNUTLS in turn is wrapping either nettle or gcrypt. Not only
were the GNUTLS hash APIs not added until GNUTLS 2.9.10, but
they don't expose support for all the algorithms QEMU needs
to use with LUKS.

Address this by directly wrapping nettle/gcrypt in QEMU and
avoiding GNUTLS's extra layer of indirection. This gives us
support for hash functions on a much wider range of platforms
and opens up ability to support more hash functions. It also
avoids a GNUTLS bug which would not correctly handle hashing
of large data blocks if int != size_t.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-04 10:47:09 +01:00
Daniel P. Berrange 8b7cdba386 crypto: fix handling of iv generator hash defaults
When opening an existing LUKS volume, if the iv generator is
essiv, then the iv hash algorithm is mandatory to provide. We
must report an error if it is omitted in the cipher mode spec,
not silently default to hash 0 (md5).  If the iv generator is
not essiv, then we explicitly ignore any iv hash algorithm,
rather than report an error, for compatibility with dm-crypt.

When creating a new LUKS volume, if the iv generator is essiv
and no iv hsah algorithm is provided, we should default to
using the sha256 hash.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-04 10:46:59 +01:00
Daniel P. Berrange 8451f2f28d trace: split out trace events for crypto/ directory
Move all trace-events for files in the crypto/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-4-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 17:22:14 +01:00
Paolo Bonzini b35c1f3361 crypto: assert that qcrypto_hash_digest_len is in range
Otherwise unintended results could happen.  For example,
Coverity reports a division by zero in qcrypto_afsplit_hash.
While this cannot really happen, it shows that the contract
of qcrypto_hash_digest_len can be improved.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-13 12:41:17 +01:00
Alex Bligh b7b68166dc TLS: provide slightly more information when TLS certificate loading fails
Give slightly more information when certification loading fails.
Rather than have no information, you now get gnutls's only slightly
less unhelpful error messages.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-13 12:41:17 +01:00
Laurent Vivier 207ba7c885 crypto: Use DIV_ROUND_UP
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).

This patch is the result of coccinelle script
scripts/coccinelle/round.cocci

CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:24 +03:00
Paolo Bonzini 58369e22cf qemu-common: stop including qemu/bswap.h from qemu-common.h
Move it to the actual users.  There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Daniel P. Berrange fff2f982ab crypto: do an explicit check for nettle pbkdf functions
Support for the PBKDF functions in nettle was not introduced
until version 2.6. Some distros QEMU targets have older
versions and thus lack PBKDF support. Address this by doing
a check in configure for the desired function and then skipping
compilation of the nettle-pbkdf.o module

Reported-by: Wen Congyang <wency@cn.fujitsu.com>
Tested-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-30 14:55:11 +01:00
Peter Maydell 84a5a80148 * Log filtering from Alex and Peter
* Chardev fix from Marc-André
 * config.status tweak from David
 * Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
 * get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
 * Coverity fix from myself
 * PKE implementation from myself, based on rth's XSAVE support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
 wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
 zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
 2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
 Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
 Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
 =K12D
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support

# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (28 commits)
  target-i386: implement PKE for TCG
  config.status: Pass extra parameters
  char: translate from QIOChannel error to errno
  exec: fix error handling in file_ram_alloc
  cputlb: modernise the debug support
  qemu-log: support simple pid substitution for logs
  target-arm: dfilter support for in_asm
  qemu-log: dfilter-ise exec, out_asm, op and opt_op
  qemu-log: new option -dfilter to limit output
  qemu-log: Improve the "exec" TB execution logging
  qemu-log: Avoid function call for disabled qemu_log_mask logging
  qemu-log: correct help text for -d cpu
  tcg: pass down TranslationBlock to tcg_code_gen
  util: move declarations out of qemu-common.h
  Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
  hw: explicitly include qemu-common.h and cpu.h
  include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
  isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
  Move ParallelIOArg from qemu-common.h to sysemu/char.h
  Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	scripts/clean-includes
2016-03-24 21:42:40 +00:00
Markus Armbruster 7136fc1da2 include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
qemu-common.h should only be included by .c files.  Its file comment
explains why: "No header file should depend on qemu-common.h, as this
would easily lead to circular header dependencies."

Several include/crypto/ headers include qemu-common.h, but either need
just qapi-types.h from it, or qemu/bswap.h, or nothing at all.  Replace or
drop the include accordingly.  tests/test-crypto-secret.c now misses
qemu/module.h, so include it there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:16 +01:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Daniel P. Berrange f7ac78cfe1 crypto: fix cipher function signature mismatch with nettle & xts
For versions of nettle < 3.0.0, the cipher functions took a
'void *ctx' and 'unsigned len' instad of 'const void *ctx'
and 'size_t len'. The xts functions though are builtin to
QEMU and always expect the latter signatures. Define a
second set of wrappers to use with the correct signatures
needed by XTS mode.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-21 10:03:45 +00:00
Daniel P. Berrange 621e6ae657 crypto: add compat cast5_set_key with nettle < 3.0.0
Prior to the nettle 3.0.0 release, the cast5_set_key function
was actually named cast128_set_key, so we must add a compatibility
definition.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-21 10:02:22 +00:00
Daniel P. Berrange 3e308f20ed crypto: implement the LUKS block encryption format
Provide a block encryption implementation that follows the
LUKS/dm-crypt specification.

This supports all combinations of hash, cipher algorithm,
cipher mode and iv generator that are implemented by the
current crypto layer.

There is support for opening existing volumes formatted
by dm-crypt, and for formatting new volumes. In the latter
case it will only use key slot 0.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 16:50:40 +00:00
Daniel P. Berrange 7d9690148a crypto: add block encryption framework
Add a generic framework for supporting different block encryption
formats. Upon instantiating a QCryptoBlock object, it will read
the encryption header and extract the encryption keys. It is
then possible to call methods to encrypt/decrypt data buffers.

There is also a mode whereby it will create/initialize a new
encryption header on a previously unformatted volume.

The initial framework comes with support for the legacy QCow
AES based encryption. This enables code in the QCow driver to
be consolidated later.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange eaec903c5b crypto: wire up XTS mode for cipher APIs
Introduce 'XTS' as a permitted mode for the cipher APIs.
With XTS the key provided must be twice the size of the
key normally required for any given algorithm. This is
because the key will be split into two pieces for use
in XTS mode.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange e3ba0b6701 crypto: refactor code for dealing with AES cipher
The built-in and nettle cipher backends for AES maintain
two separate AES contexts, one for encryption and one for
decryption. This is going to be inconvenient for the future
code dealing with XTS, so wrap them up in a single struct
so there is just one pointer to pass around for both
encryption and decryption.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange 84f7f180b0 crypto: import an implementation of the XTS cipher mode
The XTS (XEX with tweaked-codebook and ciphertext stealing)
cipher mode is commonly used in full disk encryption. There
is unfortunately no implementation of it in either libgcrypt
or nettle, so we need to provide our own.

The libtomcrypt project provides a repository of crypto
algorithms under a choice of either "public domain" or
the "what the fuck public license".

So this impl is taken from the libtomcrypt GIT repo and
adapted to be compatible with the way we need to call
ciphers provided by nettle/gcrypt.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange 50f6753e27 crypto: add support for the twofish cipher algorithm
New cipher algorithms 'twofish-128', 'twofish-192' and
'twofish-256' are defined for the Twofish algorithm.
The gcrypt backend does not support 'twofish-192'.

The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange 94318522ed crypto: add support for the serpent cipher algorithm
New cipher algorithms 'serpent-128', 'serpent-192' and
'serpent-256' are defined for the Serpent algorithm.

The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange 084a85eedd crypto: add support for the cast5-128 cipher algorithm
A new cipher algorithm 'cast-5-128' is defined for the
Cast-5 algorithm with 128 bit key size. Smaller key sizes
are supported by Cast-5, but nothing in QEMU should use
them, so only 128 bit keys are permitted.

The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:15 +00:00
Daniel P. Berrange 5a95e0fccd crypto: add support for anti-forensic split algorithm
The LUKS format specifies an anti-forensic split algorithm which
is used to artificially expand the size of the key material on
disk. This is an implementation of that algorithm.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:14 +00:00
Daniel P. Berrange cb730894ae crypto: add support for generating initialization vectors
There are a number of different algorithms that can be used
to generate initialization vectors for disk encryption. This
introduces a simple internal QCryptoBlockIV object to provide
a consistent internal API to the different algorithms. The
initially implemented algorithms are 'plain', 'plain64' and
'essiv', each matching the same named algorithm provided
by the Linux kernel dm-crypt driver.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:14 +00:00
Daniel P. Berrange 37788f253a crypto: add support for PBKDF2 algorithm
The LUKS data format includes use of PBKDF2 (Password-Based
Key Derivation Function). The Nettle library can provide
an implementation of this, but we don't want code directly
depending on a specific crypto library backend. Introduce
a new include/crypto/pbkdf.h header which defines a QEMU
API for invoking PBKDK2. The initial implementations are
backed by nettle & gcrypt, which are commonly available
with distros shipping GNUTLS.

The test suite data is taken from the cryptsetup codebase
under the LGPLv2.1+ license. This merely aims to verify
that whatever backend we provide for this function in QEMU
will comply with the spec.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 14:41:07 +00:00
Daniel P. Berrange b917da4cbd crypto: add cryptographic random byte source
There are three backend impls provided. The preferred
is gnutls, which is backed by nettle in modern distros.
The gcrypt impl is provided for cases where QEMU build
against gnutls is disabled, but crypto is still desired.
No nettle impl is provided, since it is non-trivial to
use the nettle APIs for random numbers. Users of nettle
should ensure gnutls is enabled for QEMU.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-17 09:49:01 +00:00
Daniel P. Berrange c0377a7cc6 crypto: ensure qcrypto_hash_digest_len is always defined
The qcrypto_hash_digest_len method was accidentally inside
a CONFIG_GNUTLS_HASH block, even though it doesn't depend
on gnutls. Re-arrange it to be unconditionally defined.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-02-02 13:02:56 +00:00
Daniel P. Berrange 9884abee8f crypto: register properties against the class instead of object
This converts the tlscredsx509, tlscredsanon and secret objects
to register their properties against the class rather than object.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-02-01 14:11:35 +00:00
Peter Maydell 42f7a448db crypto: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-3-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Peter Maydell d341d9f306 fpu: Replace uint8 typedef with uint8_t
Replace the uint8 softfloat-specific typedef with uint8_t.
This change was made with

find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g'

together with manual removal of the typedef definition and
manual fixing of more erroneous uses found via test compilation.

It turns out that the only code using this type is an accidental
use where uint8_t was intended anyway...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-7-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:21 +00:00
Daniel P. Berrange 50de626151 crypto: fix transposed arguments in cipher error message
When reporting an incorrect key length for a cipher, we
mixed up the actual vs expected arguments.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange d8c02bcc94 crypto: move QCryptoCipherAlgorithm/Mode enum definitions into QAPI
The QCryptoCipherAlgorithm and QCryptoCipherMode enums are
defined in the crypto/cipher.h header. In the future some
QAPI types will want to reference the hash enums, so move
the enum definition into QAPI too.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange d84b79d358 crypto: move QCryptoHashAlgorithm enum definition into QAPI
The QCryptoHashAlgorithm enum is defined in the crypto/hash.h
header. In the future some QAPI types will want to reference
the hash enums, so move the enum definition into QAPI too.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange 7b36064c90 crypto: add ability to query hash digest len
Add a qcrypto_hash_digest_len() method which allows querying of
the raw digest size for a given hash algorithm.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange dd2bf9eb95 crypto: add additional query accessors for cipher instances
Adds new methods to allow querying the length of the cipher
key, block size and initialization vectors.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-23 11:02:20 +00:00
Daniel P. Berrange 1d7b5b4afd crypto: add support for loading encrypted x509 keys
Make use of the QCryptoSecret object to support loading of
encrypted x509 keys. The optional 'passwordid' parameter
to the tls-creds-x509 object type, provides the ID of a
secret object instance that holds the decryption password
for the PEM file.

 # printf "123456" > mypasswd.txt
 # $QEMU \
    -object secret,id=sec0,filename=mypasswd.txt \
    -object tls-creds-x509,passwordid=sec0,id=creds0,\
            dir=/home/berrange/.pki/qemu,endpoint=server \
    -vnc :1,tls-creds=creds0

This requires QEMU to be linked to GNUTLS >= 3.1.11. If
GNUTLS is too old an error will be reported if an attempt
is made to pass a decryption password.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Daniel P. Berrange ac1d887849 crypto: add QCryptoSecret object class for password/key handling
Introduce a new QCryptoSecret object class which will be used
for providing passwords and keys to other objects which need
sensitive credentials.

The new object can provide secret values directly as properties,
or indirectly via a file. The latter includes support for file
descriptor passing syntax on UNIX platforms. Ordinarily passing
secret values directly as properties is insecure, since they
are visible in process listings, or in log files showing the
CLI args / QMP commands. It is possible to use AES-256-CBC to
encrypt the secret values though, in which case all that is
visible is the ciphertext.  For ad hoc developer testing though,
it is fine to provide the secrets directly without encryption
so this is not explicitly forbidden.

The anticipated scenario is that libvirtd will create a random
master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key)
and will use that key to encrypt all passwords it provides to
QEMU via '-object secret,....'.  This avoids the need for libvirt
(or other mgmt apps) to worry about file descriptor passing.

It also makes life easier for people who are scripting the
management of QEMU, for whom FD passing is significantly more
complex.

Providing data inline (insecure, only for ad hoc dev testing)

  $QEMU -object secret,id=sec0,data=letmein

Providing data indirectly in raw format

  printf "letmein" > mypasswd.txt
  $QEMU -object secret,id=sec0,file=mypasswd.txt

Providing data indirectly in base64 format

  $QEMU -object secret,id=sec0,file=mykey.b64,format=base64

Providing data with encryption

  $QEMU -object secret,id=master0,file=mykey.b64,format=base64 \
        -object secret,id=sec0,data=[base64 ciphertext],\
	           keyid=master0,iv=[base64 IV],format=base64

Note that 'format' here refers to the format of the ciphertext
data. The decrypted data must always be in raw byte format.

More examples are shown in the updated docs.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-12-18 16:25:08 +00:00
Daniel P. Berrange 0e1d02452b crypto: avoid two coverity false positive error reports
In qcrypto_tls_creds_get_path() coverity complains that
we are checking '*creds' for NULL, despite having
dereferenced it previously. This is harmless bug due
to fact that the trace call was too early. Moving it
after the cleanup gets the desired semantics.

In qcrypto_tls_creds_check_cert_key_purpose() coverity
complains that we're passing a pointer to a previously
free'd buffer into gnutls_x509_crt_get_key_purpose_oid()
This is harmless because we're passing a size == 0, so
gnutls won't access the buffer, but rather just report
what size it needs to be. We can avoid it though by
explicitly setting the buffer to NULL after free'ing
it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04 09:39:55 +03:00
Daniel P. Berrange 08cb175a24 crypto: avoid passing NULL to access() syscall
The qcrypto_tls_creds_x509_sanity_check() checks whether
certs exist by calling access(). It is valid for this
method to be invoked with certfile==NULL though, since
for client credentials the cert is optional. This caused
it to call access(NULL), which happens to be harmless on
current Linux, but should none the less be avoided.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-18 15:42:26 +00:00
Daniel P. Berrange 6ef8cd7a41 crypto: fix mistaken setting of Error in success code path
The qcrypto_tls_session_check_certificate() method was setting
an Error even when the ACL check suceeded. This didn't affect
the callers detection of errors because they relied on the
function return status, but this did cause a memory leak since
the caller would not free an Error they did not expect to be
set.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-18 14:56:58 +00:00
Daniel P. Berrange 61b9251a3a crypto: fix leak of gnutls_dh_params_t data on credential unload
The QCryptoTLSCredsX509 object was not free'ing the allocated
gnutls_dh_params_t data when unloading the credentials

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-18 14:56:58 +00:00
Daniel P. Berrange 3a661f1eab crypto: add sanity checking of plaintext/ciphertext length
When encrypting/decrypting data, the plaintext/ciphertext
buffers are required to be a multiple of the cipher block
size. If this is not done, nettle will abort and gcrypt
will report an error. To get consistent behaviour add
explicit checks upfront for the buffer sizes.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:08 +01:00
Daniel P. Berrange eb2a770b17 crypto: don't let builtin aes crash if no IV is provided
If no IV is provided, then use a default IV of all-zeros
instead of crashing. This gives parity with gcrypt and
nettle backends.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:08 +01:00
Daniel P. Berrange 91bfcdb01d crypto: allow use of nettle/gcrypt to be selected explicitly
Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.

It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.

This gives two new configure flags, which allow the
following possibilities

Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)

 ./configure

Automatically determine nettle vs gcrypt based on
which is installed

 ./configure --disable-gnutls

Force use of nettle

 ./configure --enable-nettle

Force use of gcrypt

 ./configure --enable-gcrypt

Force use of built-in AES & crippled-DES

 ./configure --disable-nettle --disable-gcrypt

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:07 +01:00
Daniel P. Berrange d321e1e526 crypto: introduce new module for handling TLS sessions
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 15:07:43 +01:00
Daniel P. Berrange 9a2fd4347c crypto: add sanity checking of TLS x509 credentials
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.

This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.

It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.

Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 15:05:09 +01:00
Daniel P. Berrange 85bcbc789e crypto: introduce new module for TLS x509 credentials
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics

Example CLI configuration:

 $QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
               dir=/path/to/creds/dir,verify-peer=yes

The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use

 $QEMU -object tls-creds-x509,id=tls0,.... \
       -vnc 127.0.0.1:1,tls-creds=tls0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-15 15:05:06 +01:00
Daniel P. Berrange e00adf6c3e crypto: introduce new module for TLS anonymous credentials
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.

Simple example CLI configuration:

 $QEMU -object tls-creds-anon,id=tls0,endpoint=server

Example using pre-created diffie-hellman parameters

 $QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
               dir=/path/to/creds/dir

The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use

 $QEMU -object tls-creds-anon,id=tls0,.... \
       -vnc 127.0.0.1:1,tls-creds=tls0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-15 15:00:20 +01:00
Daniel P. Berrange a090187de1 crypto: introduce new base module for TLS credentials
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.

If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.

The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.

The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 14:47:37 +01:00
Daniel P. Berrange fb37726db7 crypto: move crypto objects out of libqemuutil.la
Future patches will be adding more crypto related APIs which
rely on QOM infrastructure. This creates a problem, because
QOM relies on library constructors to register objects. When
you have a file in a static .a library though which is only
referenced by a constructor the linker is dumb and will drop
that file when linking to the final executable :-( The only
workaround for this is to link the .a library to the executable
using the -Wl,--whole-archive flag, but this creates its own
set of problems because QEMU is relying on lazy linking for
libqemuutil.a. Using --whole-archive majorly increases the
size of final executables as they now contain a bunch of
object code they don't actually use.

The least bad option is to thus not include the crypto objects
in libqemuutil.la, and instead define a crypto-obj-y variable
that is referenced directly by all the executables that need
this code (tools + softmmu, but not qemu-ga). We avoid pulling
entire of crypto-obj-y into the userspace emulators as that
would force them to link to gnutls too, which is not required.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 14:18:18 +01:00
Daniel P. Berrange 6775e2c429 crypto: fix built-in AES decrypt function
The qcrypto_cipher_decrypt_aes method was using the wrong
key material, and passing the wrong mode. This caused it
to incorrectly decrypt ciphertext.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1437740634-6261-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-27 12:22:01 +02:00
Kevin Wolf bd09594603 crypto: Fix aes_decrypt_wrapper()
Commit d3462e3 broke qcow2's encryption functionality by using encrypt
instead of decrypt in the wrapper function it introduces. This was found
by qemu-iotests case 134.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2015-07-20 13:35:45 +02:00
Radim Krčmář d3462e378f crypto: avoid undefined behavior in nettle calls
Calling a function pointer that was cast from an incompatible function
results in undefined behavior.  'void *' isn't compatible with 'struct
XXX *', so we can't cast to nettle_cipher_func, but have to provide a
wrapper.  (Conversion from 'void *' to 'struct XXX *' might require
computation, which won't be done if we drop argument's true type, and
pointers can have different sizes so passing arguments on stack would
bug.)

Having two different prototypes based on nettle version doesn't make
this solution any nicer.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1437062641-12684-3-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-16 20:00:21 +02:00
Radim Krčmář becaeb726a crypto: fix build with nettle >= 3.0.0
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of
'nettle_crypt_func' and these two differ in 'const' qualifier of the
first argument.  The build fails with:

  In file included from crypto/cipher.c:71:0:
  ./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’:
  ./crypto/cipher-nettle.c:154:38: error: passing argument 2 of
  ‘nettle_cbc_encrypt’ from incompatible pointer type
           cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt,
                                               ^
  In file included from ./crypto/cipher-nettle.c:24:0,
                   from crypto/cipher.c:71:
  /usr/include/nettle/cbc.h:48:1: note: expected
  ‘void (*)(const void *, size_t, uint8_t *, const uint8_t *)
  but argument is of type
  ‘void (*)(      void *, size_t, uint8_t *, const uint8_t *)

To allow both versions, we switch to the new definition and #if typedef
it for old versions.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-16 20:00:20 +02:00
Paolo Bonzini 4f4f6976d8 crypto: fix builtin qcrypto_cipher_free
This was dereferencing a pointer before checking if it was NULL.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-09 16:53:45 +02:00
Daniel P. Berrange ed754746fe crypto: add a nettle cipher implementation
If we are linking to gnutls already and gnutls is built against
nettle, then we should use nettle as a cipher backend in
preference to our built-in backend.

This will be used when linking against some GNUTLS 2.x versions
and all GNUTLS 3.x versions.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com>
[Change "#elif" to "#elif defined". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Daniel P. Berrange 62893b67cd crypto: add a gcrypt cipher implementation
If we are linking to gnutls already and gnutls is built against
gcrypt, then we should use gcrypt as a cipher backend in
preference to our built-in backend.

This will be used when linking against GNUTLS 1.x and many
GNUTLS 2.x versions.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Daniel P. Berrange ca38a4cc9e crypto: introduce generic cipher API & built-in implementation
Introduce a generic cipher API and an implementation of it that
supports only the built-in AES and DES-RFB algorithms.

The test suite checks the supported algorithms + modes to
validate that every backend implementation is actually correctly
complying with the specs.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Daniel P. Berrange 9fd72468df crypto: move built-in D3DES implementation into crypto/
To prepare for a generic internal cipher API, move the
built-in D3DES implementation into the crypto/ directory.

This is not in fact a normal D3DES implementation, it is
D3DES with double & triple length modes removed, and the
key bytes in reversed bit order. IOW it is crippled
specifically for the "benefit" of RFB, so call the new
files desrfb.c instead of d3des.c to make it clear that
it isn't a generally useful impl.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07 12:04:31 +02:00
Daniel P. Berrange 6f2945cde6 crypto: move built-in AES implementation into crypto/
To prepare for a generic internal cipher API, move the
built-in AES implementation into the crypto/ directory

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07 12:04:13 +02:00
Daniel P. Berrange ddbb0d0966 crypto: introduce new module for computing hash digests
Introduce a new crypto/ directory that will (eventually) contain
all the cryptographic related code. This initially defines a
wrapper for initializing gnutls and for computing hashes with
gnutls. The former ensures that gnutls is guaranteed to be
initialized exactly once in QEMU regardless of CLI args. The
block quorum code currently fails to initialize gnutls so it
only works by luck, if VNC server TLS is not requested. The
hash APIs avoids the need to litter the rest of the code with
preprocessor checks and simplifies callers by allocating the
correct amount of memory for the requested hash.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07 12:04:07 +02:00