Since size_to_prdtl() is only used within ahci.c,
declare it statically. This removes the last use
of "inlined function with external linkage". See
previous commit and commit 9de9fa5cf2 for rationale.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240326171009.26696-4-philmd@linaro.org>
The test mangles the GPIO address and the pin number in the
qtest_add_data_func data parameter. Doing so, it assumes that the host
pointer size is always 64-bit, which breaks on 32-bit :
../tests/qtest/stm32l4x5_gpio-test.c: In function ‘test_gpio_output_mode’:
../tests/qtest/stm32l4x5_gpio-test.c:272:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
272 | unsigned int pin = ((uint64_t)data) & 0xF;
| ^
../tests/qtest/stm32l4x5_gpio-test.c:273:22: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
273 | uint32_t gpio = ((uint64_t)data) >> 32;
| ^
To fix, improve the mangling of the GPIO address and pin number fields
by using GPIO_SIZE so that the resulting value fits in a 32-bit pointer.
While at it, include some helpers to hide the details.
Cc: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Cc: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-id: 20240329092747.298259-1-clg@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 558f5c42ef gated the local tests with g_test_slow() to skip them
in 'make check'. The reported issue back then was this following CI
problem:
https://lists.nongnu.org/archive/html/qemu-devel/2020-11/msg05510.html
This problem ended up being fixed after it was detected with the
recently added risc-v machine nodes [1]. virtio-9p-test.c is now
creating and removing temporary dirs for each test run, instead of
creating a single dir for the entire qos-test scope.
We're now able to run these tests with 'make check' in the CI, so let's
go ahead and re-enable them.
This reverts commit 558f5c42ef.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-3-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The local 9p driver in virtio-9p-test.c its temporary dir right at the
start of qos-test (via virtio_9p_create_local_test_dir()) and only
deletes it after qos-test is finished (via
virtio_9p_remove_local_test_dir()).
This means that any qos-test machine that ends up running virtio-9p-test
local tests more than once will end up re-using the same temp dir. This
is what's happening in [1] after we introduced the riscv machine nodes:
if we enable slow tests with the '-m slow' flag using
qemu-system-riscv64, this is what happens:
- a temp dir is created;
- virtio-9p-device tests will run virtio-9p-test successfully;
- virtio-9p-pci tests will run virtio-9p-test, and fail right at the
first slow test at fs_create_dir() because the "01" file was already
created by fs_create_dir() test when running with the virtio-9p-device.
The root cause is that we're creating a single temporary dir, via the
construct/destruct callbacks, and this temp dir is kept for the entire
qos-test run.
We can change each test to clean after themselves. This approach would
make the 'create' tests obsolete since we would need to create and
delete dirs/files/symlinks for the cleanup, turning them into the
'unlinkat' tests that comes right after.
We chose a different approach that handles the root cause: do not use
constructor/destructor to create the temp dir. Create one temp dir for
each test, and remove it after the test is complete. This is the
approach taken for other qtests like vhost-user-test.c where each test
requires a setup() and a subsequent cleanup(), all of those instantiated
in the .before callback.
[1] https://mail.gnu.org/archive/html/qemu-devel/2024-03/msg05807.html
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20240327142011.805728-2-dbarboza@ventanamicro.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYBhdgRHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbVcfA/9FulEN4HrjD3ObyboA+WfibXURwChui98
8LvL/fAGe3BZXQtspuNmPyrKRtIOrIwHJyFuxf2N5+8BuvGhEHQIuvIhQIj/rvfy
X14KlldmQ3w3HlI3Ud4YiebLyK3AAFC2ApIywzFsnN+HoaHJR2EyDIb+T7OsGJZf
ZLE/Z7qANxoNeZ+a3+rQR3SVpijyS3fXxDSaILrq2uW4kCCs/55O8Rt3Qb+PFSVd
fF+OlpG6o+z73ACZc1u9Io4IO1ZZc/NdkmDTNz4HknkvJLTLF6kOECAxLl0ytgAG
YRzBGKes29Zpa9wn/9rc75/OYNS0Ks+B19sQnijWUNX0zq5FkReXNXiyVcbT7d4p
6jFzlFnjj4ifB8uQkZTGcx/lL4s4VkPzF+f7fgHq9CKNrNsx8uca0TyQ8s4y+NGb
C98kJdHd+QhCcuNnAbifCwuFaxQ8C4BdgzxVbU/sGDKNkINNkiTp+uue4TxnRKvV
MfhqdnWRvqgZ0Rl4TxqcNfODK72Z1YNv3933OKE/mRJYS1Q529TIq4vfp8WIMsWQ
7+ipo4WKXhkiSOJZD6AkCoFum1W8yaDzUDJTw2Xt2bPBL3+FXcQyKkKVUMfzIJ8M
KLe0Bb9W/pYU1ToTciTP0dkQF/02tG0Vik273445wPgH0x8OyHJkPF/ny1a7lKFO
5jreYdMxWdc=
=lfZM
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu into staging
* Fix timeouts in Travis-CI jobs
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYBhdgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVcfA/9FulEN4HrjD3ObyboA+WfibXURwChui98
# 8LvL/fAGe3BZXQtspuNmPyrKRtIOrIwHJyFuxf2N5+8BuvGhEHQIuvIhQIj/rvfy
# X14KlldmQ3w3HlI3Ud4YiebLyK3AAFC2ApIywzFsnN+HoaHJR2EyDIb+T7OsGJZf
# ZLE/Z7qANxoNeZ+a3+rQR3SVpijyS3fXxDSaILrq2uW4kCCs/55O8Rt3Qb+PFSVd
# fF+OlpG6o+z73ACZc1u9Io4IO1ZZc/NdkmDTNz4HknkvJLTLF6kOECAxLl0ytgAG
# YRzBGKes29Zpa9wn/9rc75/OYNS0Ks+B19sQnijWUNX0zq5FkReXNXiyVcbT7d4p
# 6jFzlFnjj4ifB8uQkZTGcx/lL4s4VkPzF+f7fgHq9CKNrNsx8uca0TyQ8s4y+NGb
# C98kJdHd+QhCcuNnAbifCwuFaxQ8C4BdgzxVbU/sGDKNkINNkiTp+uue4TxnRKvV
# MfhqdnWRvqgZ0Rl4TxqcNfODK72Z1YNv3933OKE/mRJYS1Q529TIq4vfp8WIMsWQ
# 7+ipo4WKXhkiSOJZD6AkCoFum1W8yaDzUDJTw2Xt2bPBL3+FXcQyKkKVUMfzIJ8M
# KLe0Bb9W/pYU1ToTciTP0dkQF/02tG0Vik273445wPgH0x8OyHJkPF/ny1a7lKFO
# 5jreYdMxWdc=
# =lfZM
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Mar 2024 14:10:32 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Test TEST AND SET
target/s390x: Use mutable temporary value for op_ts
libqos/virtio.c: Correct 'flags' reading in qvirtqueue_kick
misc/pca955*: Move models under hw/gpio
aspeed: Make the ast1030-a1 SoC not user creatable
aspeed: Make the ast2600-a3 SoC not user creatable
hw/microblaze: Do not allow xlnx-zynqmp-pmu-soc to be created by the user
.travis.yml: Remove the unused xfslib-dev package
.travis.yml: Shorten the runtime of the problematic jobs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out that g_setenv() can fail and we don't
check for this in qtest_inproc_init(). In practice this will
only fail if a memory allocation failed in setenv() or if
the caller passed an invalid architecture name (e.g. one
with an '=' in it), so rather than requiring the callsite
to check for failure, make g_setenv() failure fatal here,
similarly to what we did in commit aca68d95c5.
Resolves: Coverity CID 1497485
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-8-peter.maydell@linaro.org
In qvirtqueue_kick(), the 'flags' were previously being incorrectly read from
vq->avail instead of the correct vq->used location. This update ensures 'flags'
are read from the correct location as per the virtio standard.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240320090442.267525-1-zheyuma97@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In test_rx() and test_tx() we allocate a GString *cmd_line
but never free it. This is pretty harmless in a test case, but
Coverity spotted it.
Resolves: Coverity CID 1507122
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-2-peter.maydell@linaro.org
This reverts commit decdc76772 in full
and also the relevant migration-tests from
7a09f09283.
After the addition of the new QAPI-based migration address API in 8.2
we've been converting an "fd:" URI into a SocketAddress, missing the
fact that the "fd:" syntax could also be used for a plain file instead
of a socket. This is a problem because the SocketAddress is part of
the API, so we're effectively asking users to create a "socket"
channel to pass in a plain file.
The easiest way to fix this situation is to deprecate the usage of
both SocketAddress and "fd:" when used with a plain file for
migration. Since this has been possible since 8.2, we can wait until
9.1 to deprecate it.
For 9.0, however, we should avoid adding further support to migration
to a plain file using the old "fd:" syntax or the new SocketAddress
API, and instead require the usage of either the old-style "file:" URI
or the FileMigrationArgs::filename field of the new API with the
"/dev/fdset/NN" syntax, both of which are already supported.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240319210941.1907-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
address shift is caused by switch to 32-bit SMBIOS entry point
which has slightly different size from 64-bit one and happens
to trigger a bit different memory layout.
Expected diff:
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-19-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unfortunately having 2.0 machine type deprecated is not enough
to get rid of legacy SMBIOS handling since 'isapc' also uses
that and it's staying around.
Hence add test for CLI options handling to be sure that it
ain't broken during SMBIOS code refactoring.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cureently it not possible to run SMBIOS test without ACPI one,
which gets into the way when testing ACPI-less configs.
Extract SMBIOS testing into separate routines that could also
be run without ACPI dependency and use that for testing SMBIOS.
As the 1st user add "acpi/piix4/smbios-options" test case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
+jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
=C0UU
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
Currently the default input range can extend to 64 bits. On x86,
when the virtio-iommu protects vfio devices, the physical iommu
may support only 39 bits. Let's set the default to 39, as done
for the intel-iommu.
We use hw_compat_8_2 to handle the compatibility for machines
before 9.0 which used to have a virtio-iommu default input range
of 64 bits.
Of course if aw-bits is set from the command line, the default
is overriden.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240307134445.92296-8-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
query-cpu-model-comparison, query-cpu-model-baseline, and
query-cpu-model-expansion take CpuModelInfo arguments. Errors in
@props members of these arguments are reported for 'props', without
further context. For instance, s390x rejects
{"execute": "query-cpu-model-comparison", "arguments": {"modela": {"name": "z13", "props": {}}, "modelb": {"name": "z14", "props": []}}}
with
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'props', expected: object"}}
This is unusual; the common QAPI unmarshaling machinery would complain
about 'modelb.props'. Our hand-written code to visit the @props
member neglects to provide the context.
Tweak it so it provides it. The command above now fails with
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'modelb.props', expected: dict"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-4-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
CpuModelInfo member @props is semantically a mapping from name to
value, and syntactically a JSON object on the wire. This translates
to QDict in C. Since the QAPI schema language lacks the means to
express 'object', we use 'any' instead. This is QObject in C.
Commands taking a CpuModelInfo argument need to check the QObject is a
QDict.
For arm, riscv, and s390x, the code checks right before passing the
QObject to visit_start_struct(). visit_start_struct() then checks
again.
Delete the first check.
The error message for @props that are not an object changes slightly
to the the message we get for this kind of type error in other
contexts. Minor improvement.
Additionally, error messages about members of @props now refer to
'props.prop-name' instead of just 'prop-name'. Another minor
improvement.
Both changes are visible in tests/qtest/arm-cpu-features.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240305145919.2186971-2-armbru@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
[Drop #include now superfluous]
Now that zero page checking is done on the multifd sender threads by
default, we still provide an option for backward compatibility. This
change adds a qtest migration test case to set the zero-page-detection
option to "legacy" and run multifd migration with zero page checking on the
migration main thread.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240311180015.3359271-8-hao.xiang@linux.dev
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a RISC-V 'virt' machine to the graph. This implementation is a
modified copy of the existing arm machine in arm-virt-machine.c
It contains a virtio-mmio and a generic-pcihost controller. The
generic-pcihost controller hardcodes assumptions from the ARM 'virt'
machine, like ecam and pio_base addresses, so we'll add an extra step to
set its parameters after creating it.
Our command line is incremented with 'aclint' parameters to allow the
machine to run MSI tests.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The testcase contains :
- `test_idr_reset_value()` :
Checks the reset values of MODER, OTYPER, PUPDR, ODR and IDR.
- `test_gpio_output_mode()` :
Checks that writing a bit in register ODR results in the corresponding
pin rising or lowering, if this pin is configured in output mode.
- `test_gpio_input_mode()` :
Checks that a input pin set high or low externally results
in the pin rising and lowering.
- `test_pull_up_pull_down()` :
Checks that a floating pin in pull-up/down mode is actually high/down.
- `test_push_pull()` :
Checks that a pin set externally is disconnected when configured in
push-pull output mode, and can't be set externally while in this mode.
- `test_open_drain()` :
Checks that a pin set externally high is disconnected when configured
in open-drain output mode, and can't be set high while in this mode.
- `test_bsrr_brr()` :
Checks that writing to BSRR and BRR has the desired result in ODR.
- `test_clock_enable()` :
Checks that GPIO clock is at the right frequency after enabling it.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240305210444.310665-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We "fixed" a bug with LTO builds with 100c459f19 (tests/qtest: bump
up QOS_PATH_MAX_ELEMENT_SIZE) but it seems it has triggered again.
The array is sized according to the maximum anticipated length of a
path on the graph. However, the worst case for a depth-first search is
to push all nodes on the graph. So it's not really LTO, it depends on
the ordering of the constructors.
Lets be more assertive raising QOS_PATH_MAX_ELEMENT_SIZE to make it go
away again.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1186 (again)
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-2-alex.bennee@linaro.org>
Tests:
- the ability to change the sysclk of the device
- the ability to enable/disable/configure the PLLs
- if the clock multiplexers work
- the register flags and the generation of irqs
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240303140643.81957-9-arnaud.minier@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Simple testcase for validating proper operation of read and write for all
three BSC controllers.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240224191038.2409945-4-rayhan.faizel@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Bryan's fix on multifd compression level API
- Fabiano's mapped-ram series (base + multifd only)
- Steve's amend on cpr document in qapi/
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY
kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO
=AeEn
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migartion pull request for 20240304
- Bryan's fix on multifd compression level API
- Fabiano's mapped-ram series (base + multifd only)
- Steve's amend on cpr document in qapi/
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY
# kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO
# =AeEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Mar 2024 01:26:02 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (27 commits)
migration/multifd: Document two places for mapped-ram
tests/qtest/migration: Add a multifd + mapped-ram migration test
migration/multifd: Add mapped-ram support to fd: URI
migration/multifd: Support incoming mapped-ram stream format
migration/multifd: Support outgoing mapped-ram stream format
migration/multifd: Prepare multifd sync for mapped-ram migration
migration/multifd: Add incoming QIOChannelFile support
migration/multifd: Add outgoing QIOChannelFile support
migration/multifd: Add a wrapper for channels_created
migration/multifd: Allow receiving pages without packets
migration/multifd: Allow multifd without packets
migration/multifd: Decouple recv method from pages
migration/multifd: Rename MultiFDSend|RecvParams::data to compress_data
tests/qtest/migration: Add tests for mapped-ram file-based migration
migration/ram: Add incoming 'mapped-ram' migration
migration/ram: Add outgoing 'mapped-ram' migration
migration: Add mapped-ram URI compatibility check
migration/ram: Introduce 'mapped-ram' migration capability
migration/qemu-file: add utility methods for working with seekable channels
io: fsync before closing a file channel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# migration/ram.c
In qvring_init() we're writing vq->used->avail_event at "vq->used + 2 +
array_size". The struct pointed by vq->used is, from virtio_ring.h
Linux header):
* // A ring of used descriptor heads with free-running index.
* __virtio16 used_flags;
* __virtio16 used_idx;
* struct vring_used_elem used[num];
* __virtio16 avail_event_idx;
So 'flags' is the word right at vq->used. 'idx' is vq->used + 2. We need
to skip 'used_idx' by adding + 2 bytes, and then sum the vector size, to
reach avail_event_idx. An example on how to properly access this field
can be found in qvirtqueue_kick():
avail_event = qvirtio_readw(d, qts, vq->used + 4 +
sizeof(struct vring_used_elem) * vq->size);
This error was detected when enabling the RISC-V 'virt' libqos machine.
The 'idx' test from vhost-user-blk-test.c errors out with a timeout in
qvirtio_wait_used_elem(). The timeout happens because when processing
the first element, 'avail_event' is read in qvirtqueue_kick() as non-zero
because we didn't initialize it properly (and the memory at that point
happened to be non-zero). 'idx' is 0.
All of this makes this condition fail because "idx - avail_event" will
overflow and be non-zero:
/* < 1 because we add elements to avail queue one by one */
if ((flags & VRING_USED_F_NO_NOTIFY) == 0 &&
(!vq->event || (uint16_t)(idx-avail_event) < 1)) {
d->bus->virtqueue_kick(d, vq);
}
As a result the virtqueue is never kicked and we'll timeout waiting for it.
Fixes: 1053587c3f ("libqos: Added EVENT_IDX support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-3-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The loop isn't setting the values for the last element. Every other
element is being initialized with addr = 0, flags = VRING_DESC_F_NEXT
and next = i + 1. The last elem is never touched.
This became a problem when enabling a RISC-V 'virt' libqos machine in
the 'indirect' test of virti-blk-test.c. The 'flags' for the last
element will end up being an odd number (since we didn't touch it).
Being an odd number it will be mistaken by VRING_DESC_F_NEXT, which
happens to be 1.
Deep into hw/virt/virtio.c, in virtqueue_split_pop(), into
virtqueue_split_read_next_desc(), a check for VRING_DESC_F_NEXT will be
made to see if we're supposed to chain. The code will keep up chaining
in the last element because the uninitialized value happens to be odd.
We'll error out right after that because desc->next (which is also
uninitialized) will be >= max. A VIRTQUEUE_READ_DESC_ERROR will be
returned, with an error message like this in the stderr:
qemu-system-riscv64: Desc next is 49391
Since we never returned, we'll end up timing out at qvirtio_wait_used_elem():
ERROR:../tests/qtest/libqos/virtio.c:236:qvirtio_wait_used_elem:
assertion failed: (g_get_monotonic_time() - start_time <= timeout_us)
The root cause is using uninitialized values from guest_alloc() in
qvring_indirect_desc_setup(). There's no guarantee that the memory pages
retrieved will be zeroed, so we can't make assumptions. In fact, commit
5b4f72f5e8 ("tests/qtest: properly initialise the vring used idx") fixed a
similar problem stating "It is probably not wise to assume guest memory
is zeroed anyway". I concur.
Initialize all elems in qvring_indirect_desc_setup().
Fixes: f294b029aa ("libqos: Added indirect descriptor support to virtio implementation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-2-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fd URI supports an fd that is backed by a file. The code should
select between QIOChannelFile and QIOChannelSocket, depending on the
type of the fd. Add a test for that.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Next patch adds another fd test. Rename the existing one closer to
what's used on other tests, with the 'precopy' prefix.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240220224138.24759-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
This commit adds a QTest that verifies each input line of a specific
EXTI OR gate can influence the output line.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240220184145.106107-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tests the following for both P9 and P10:
- I2C master POR status
- I2C master status after immediate reset
Tests the following for powernv10-ranier only:
- Config pca9552 hotplug device pins as inputs then
Read the INPUT0/1 registers to verify all pins are high
- Connected GPIO pin tests of P10 PCA9552 device. Tests
output of pins 0-4 affect input of pins 5-9 respectively.
- PCA9554 GPIO pins test. Tests input and ouput functionality.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The pca9552 INPUT0 and INPUT1 registers are supposed to
hold the logical values of the LED pins. A logical 0
should be seen in the INPUT0/1 registers for a pin when
its corresponding LSn bits are set to 0, which is also
the state needed for turning on an LED in a typical
usage scenario. Existing code was doing the opposite
and setting INPUT0/1 bit to a 1 when the LSn bit was
set to 0, so this commit fixes that.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When compiling with "configure --without-default-devices", the
dbus-display-test fails since it implicitly assumes that the
machine comes with a default console.
There doesn't seem to be an easy way to figure this during build time,
so skip the tests requiring the Console interface at runtime.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240221073759.171443-1-marcandre.lureau@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If "configure" has been run with "--without-default-devices", there is
no e1000 device in the binaries, so the boot-serial-test currently fails
in that case since it tries to use the e1000 with the sam460ex machine.
Since we're testing the serial output here, and not the NIC, let's
simply switch to the "pci-bridge" device here instead, which should
always be there for PCI-based machines like the sam460ex.
Message-ID: <20240219111030.384158-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cdrom test skips to execute on LoongArch system with command
"make check", this patch enables cdrom test for LoongArch virt
machine platform.
With this patch, cdrom test passes to run on LoongArch virt
machine type.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240217100230.134042-1-maobibo@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It ensures dbus-display1.c will not be recompiled.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240214-dbus-v7-3-7eff29f04c34@daynix.com>
Fix the nocm_gmac-test.c file to run on a nuvoton 7xx machine instead
of 8xx. Also fix comments referencing this and values expecting 8xx.
Change-Id: Iabd0fba14910c3f1e883c4a9521350f3db9ffab8
Signed-Off-By: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240208194759.2858582-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently QEMU will warn if there is a NIC on the board that
is not connected to a backend. By default the '-nic user' will
get used for all NICs, but if you manually connect a specific
NIC to a specific backend, then the other NICs on the board
have no backend and will be warned about:
qemu-system-arm: warning: nic npcm7xx-emc.1 has no peer
qemu-system-arm: warning: nic npcm-gmac.0 has no peer
qemu-system-arm: warning: nic npcm-gmac.1 has no peer
So suppress those warnings by manually connecting every NIC
on the board to some backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240206171231.396392-3-peter.maydell@linaro.org
Allow changes to the virt GTDT -- we are going to add the IRQ
entry for a new timer to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Message-id: 20240122143537.233498-2-peter.maydell@linaro.org
We deliberately don't include qtests_npcm7xx in qtests_aarch64,
because we already get the coverage of those tests via qtests_arm,
and we don't want to use extra CI minutes testing them twice.
In commit 327b680877 we added it to qtests_aarch64; revert
that change.
Fixes: 327b680877 ("tests/qtest: Creating qtest for GMAC Module")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206163043.315535-1-peter.maydell@linaro.org
