In qemu monitor mode, when we use gpa2hva command to print the host
virtual address corresponding to a guest physical address, if the gpa is
not in RAM, the error message is below:
(qemu) gpa2hva 0x750000000
Memory at address 0x750000000is not RAM
A space is missed between '0x750000000' and 'is'.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Fixes: e9628441df ("hmp: gpa2hva and gpa2hpa hostaddr command")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20240319021610.2423844-1-ruansy.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The io_timeout property, introduced in c9b6609 (part of 6.0) is
silently overwritten by the hardcoded default value of 30 seconds
(DEFAULT_IO_TIMEOUT) in scsi_generic_realize because that function is
being called after the properties have already been applied.
The property definition already has a default value which is applied
correctly when no value is explicitly set, so we can just remove the
code which overrides the io_timeout completely.
This has been tested by stracing SG_IO operations with the io_timeout
property set and unset and now sets the timeout field in the ioctl
request to the proper value.
Fixes: c9b6609b69 ("scsi: make io_timeout configurable")
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Message-ID: <20240315145831.2531695-1-lorenz@brun.one>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
CXL emulation of interleave requires read and write hooks due to
requirement for subpage granularity. The Linux kernel stack now enables
using this memory as conventional memory in a separate NUMA node. If a
process is deliberately forced to run from that node
$ numactl --membind=1 ls
the page table walk on i386 fails.
Useful part of backtrace:
(cpu=cpu@entry=0x555556fd9000, fmt=fmt@entry=0x555555fe3378 "cpu_io_recompile: could not find TB for pc=%p")
at ../../cpu-target.c:359
(retaddr=0, addr=19595792376, attrs=..., xlat=<optimized out>, cpu=0x555556fd9000, out_offset=<synthetic pointer>)
at ../../accel/tcg/cputlb.c:1339
(cpu=0x555556fd9000, full=0x7fffee0d96e0, ret_be=ret_be@entry=0, addr=19595792376, size=size@entry=8, mmu_idx=4, type=MMU_DATA_LOAD, ra=0) at ../../accel/tcg/cputlb.c:2030
(cpu=cpu@entry=0x555556fd9000, p=p@entry=0x7ffff56fddc0, mmu_idx=<optimized out>, type=type@entry=MMU_DATA_LOAD, memop=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:2356
(cpu=cpu@entry=0x555556fd9000, addr=addr@entry=19595792376, oi=oi@entry=52, ra=ra@entry=0, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2439
at ../../accel/tcg/ldst_common.c.inc:301
at ../../target/i386/tcg/sysemu/excp_helper.c:173
(err=0x7ffff56fdf80, out=0x7ffff56fdf70, mmu_idx=0, access_type=MMU_INST_FETCH, addr=18446744072116178925, env=0x555556fdb7c0)
at ../../target/i386/tcg/sysemu/excp_helper.c:578
(cs=0x555556fd9000, addr=18446744072116178925, size=<optimized out>, access_type=MMU_INST_FETCH, mmu_idx=0, probe=<optimized out>, retaddr=0) at ../../target/i386/tcg/sysemu/excp_helper.c:604
Avoid this by plumbing the address all the way down from
x86_cpu_tlb_fill() where is available as retaddr to the actual accessors
which provide it to probe_access_full() which already handles MMIO accesses.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2180
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2220
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240307155304.31241-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Previously, bdrv_pad_request() could not deal with a NULL qiov when
a read needed to be aligned. During prefetch, a stream job will pass a
NULL qiov. Add a test case to cover this scenario.
By accident, also covers a previous race during shutdown, where block
graph changes during iteration in bdrv_flush_all() could lead to
unreferencing the wrong block driver state and an assertion failure
later.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-5-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Same rationale as for commit "block-backend: fix edge case in
bdrv_next() where BDS associated to BB changes". The block graph might
change between the bdrv_next() call and the bdrv_next_cleanup() call,
so it could be that the associated BDS is not the same that was
referenced previously anymore. Instead, rely on bdrv_next() to set
it->bs to the BDS it referenced and unreference that one in any case.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-4-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some operations, e.g. block-stream, perform reads while discarding the
results (only copy-on-read matters). In this case, they will pass NULL
as the target QEMUIOVector, which will however trip bdrv_pad_request,
since it wants to extend its passed vector. In particular, this is the
case for the blk_co_preadv() call in stream_populate().
If there is no qiov, no operation can be done with it, but the bytes
and offset still need to be updated, so the subsequent aligned read
will actually be aligned and not run into an assertion failure.
In particular, this can happen when the request alignment of the top
node is larger than the allocated part of the bottom node, in which
case padding becomes necessary. For example:
> ./qemu-img create /tmp/backing.qcow2 -f qcow2 64M -o cluster_size=32768
> ./qemu-io -c "write -P42 0x0 0x1" /tmp/backing.qcow2
> ./qemu-img create /tmp/top.qcow2 -f qcow2 64M -b /tmp/backing.qcow2 -F qcow2
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/top.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "compress", "file": "node0", "node-name": "node1" } }
> {"execute": "block-stream", "arguments": { "job-id": "stream0", "device": "node1" } }
> EOF
Originally-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
[FE: do update bytes and offset in any case
add reproducer to commit message]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VDUSE requires that virtqueues are first enabled before the DRIVER_OK
status flag is set; with the current API of the kernel module, it is
impossible to enable the opposite order in our block export code because
userspace is not notified when a virtqueue is enabled.
This requirement also mathces the normal initialisation order as done by
the generic vhost code in QEMU. However, commit 6c482547 accidentally
changed the order for vdpa-dev and broke access to VDUSE devices with
this.
This changes vdpa-dev to use the normal order again and use the standard
vhost callback .vhost_set_vring_enable for this. VDUSE devices can be
used with vdpa-dev again after this fix.
vhost_net intentionally avoided enabling the vrings for vdpa and does
this manually later while it does enable them for other vhost backends.
Reflect this in the vhost_net code and return early for vdpa, so that
the behaviour doesn't change for this device.
Cc: qemu-stable@nongnu.org
Fixes: 6c4825476a ('vdpa: move vhost_vdpa_set_vring_ready to the caller')
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240315155949.86066-1-kwolf@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 157 and 227 use the virtio-blk device, so we have to mark these
tests accordingly to be skipped if this devices is not available (e.g.
when running the tests with qemu-system-avr only).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240325154737.1305063-1-thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----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=li36
-----END PGP SIGNATURE-----
Merge tag 'pull-qapi-2024-03-26' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2024-03-26
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmYCXs0SHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTRMkP/RR9ipyCh1P6KKuQCyouxM8nXZ945b33
# L0OBFY4cTZsMY98ZTU9i80f/Tjh58y5bYzSdr21jxBSdRlvb6w/Ys8xUsI2Hi/kZ
# czdKZbWT5IeSNrLw04CjhW2FKq8XXR7epHbPms2nBa1Xc5Jf8aIC2UhZKADeVCyE
# FCIUU8Ctkyvre3XGVOrIBhhVPs9hi33uG+HXiveQjjWwGZZ0v915sAZ4WvNEoiBS
# E0NwhJxtbQu8FwfBquE84o0TMzYb19MlU4zq3G5dv7PhLoXX9Lf097/tPEtoP4et
# H37eGD8MzL1hywf+E1vAw0HC/v7Ci5Kx1jpUUL03Hfvfa6Lktb6yYke8qAD1HopK
# o4btXKpfseuyTJuqTVaV4Z9tLqmpTddnUupBFkfKviMPdidAN9SM1qXx0VCM9mUo
# cwf5di6zOPTNYlsKuP6ofSGGaD5so9PGLGAZoGeZ1Cb7TLsgiqqD0GrPP0//1VLn
# GzOOsOA4Su9F2/qjkNu2HZ1jv6J105LbQnaPvqjVfkjzzmoOANYmViX3KmDwdBxX
# vSfy5/UpCP9TBv++N/ljRtrVzW9i4a2rIGeHWC0x/JJglIh45f2MzeyqJ5haV2n5
# MVY82yY7EY7U+YXUUUKSgGVWw7+/wj/R5wQ5a9Gjk9OlmTsTHxJIKIzhcw4lX9da
# ZmRLCSIlVu4Z
# =li36
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Mar 2024 05:36:13 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2024-03-26' of https://repo.or.cz/qemu/armbru:
qapi: document parameters of query-cpu-model-* QAPI commands
qapi/block-core: improve Qcow2OverlapCheckFlags documentation
qapi: document leftover members in qapi/stats.json
qapi: document leftover members in qapi/run-state.json
qapi: document InputMultiTouchType
qga/qapi-schema: Refill doc comments to conform to current conventions
qapi: Correct documentation indentation and whitespace
qapi: Refill doc comments to conform to current conventions
qapi: Don't repeat member type in its documentation text
qapi: Start sentences with a capital letter, end them with a period
qapi: Fix abbreviation punctuation in doc comments
qapi: Fix typo in request-ebpf documentation
qapi: Fix argument markup in drive-mirror documentation
qapi: Tidy up indentation of add_client's example
qapi: Tidy up block-latency-histogram-set documentation some more
qapi: Expand a few awkward abbreviations in documentation
qapi: Drop stray Arguments: line from qmp_capabilities docs
qapi: Fix bogus documentation of query-migrationthreads
qapi: Resync MigrationParameter and MigrateSetParameters
qapi: Improve migration TLS documentation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's document the parameters of these commands, so we can remove them
from the "documentation-exceptions" list.
While at it, extend the "Returns:" documentation as well, fixing a wrong
use of CpuModelBaselineInfo vs. CpuModelCompareInfo for
query-cpu-model-comparison.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240325150141.342720-1-david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Punctuation tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Most of fields have no description at all. Let's fix that. Still, no
reason to place here more detailed descriptions of what these
structures are, as we have public Qcow2 format specification.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240325120054.2693236-1-vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Capitalize "QEMU", update qapi/pragma.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240325104504.1358734-1-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Update qapi/pragma.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For legibility, wrap text paragraphs so every line is at most 70
characters long.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the refilled
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-13-armbru@redhat.com>
For legibility, wrap text paragraphs so every line is at most 70
characters long.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the refilled
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-11-armbru@redhat.com>
Documentation generated for the arguments of MEMORY_FAILURE looks like
"recipient": "MemoryFailureRecipient"
recipient is defined as "MemoryFailureRecipient".
"action": "MemoryFailureAction"
action that has been taken. action is defined as
"MemoryFailureAction".
"flags": "MemoryFailureFlags"
flags for MemoryFailureAction. action is defined as
"MemoryFailureFlags".
The "action is defined as ..." are redundant. Drop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-10-armbru@redhat.com>
Commit d23055b8db (qapi: Require descriptions and tagged sections to
be indented) indented add_client's example too much. Revert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-5-armbru@redhat.com>
[Move a stray hunk to the later patch it belongs to]
Commit a937b6aa73 (qapi: Reformat doc comments to conform to current
conventions) reflowed some text that should have been left alone.
Revert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-4-armbru@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Fixes: 119ebac1fe (qapi-schema: use generated marshaller for 'qmp_capabilities')
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The doc comment documents an argument that doesn't exist. Would
fail compilation if it was marked up correctly. Delete.
The Returns: section fails to refer to the data type, leaving the user
to guess. Fix that.
The command name violates QAPI naming rules: it should be
query-migration-threads. Too late to fix.
Reported-by: John Snow <jsnow@redhat.com>
Fixes: 671326201d (migration: Introduce interface query-migrationthreads)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322135117.195489-4-armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Enum MigrationParameter mirrors the members of struct
MigrateSetParameters. Differences to MigrateSetParameters's member
documentation are pointless. Clean them up:
* @compress-level, @compress-threads, @decompress-threads, and
x-checkpoint-delay are more thoroughly documented for
MigrationParameter, so use that version for both.
* @max-cpu-throttle is almost the same. Use MigrationParameter's
version for both.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322135117.195489-3-armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
MigrateSetParameters is about setting parameters, and
MigrationParameters is about querying them. Their documentation of
@tls-creds and @tls-hostname has residual damage from a failed attempt
at de-duplicating them (see commit de63ab6124 "migrate: Share common
MigrationParameters struct" and commit 1bda8b3c69 "migration: Unshare
MigrationParameters struct for now").
MigrateSetParameters documentation issues:
* It claims plain text mode "was reported by omitting tls-creds"
before 2.9. MigrateSetParameters is not used for reporting, so this
is misleading. Delete.
* It similarly claims hostname defaulting to migration URI "was
reported by omitting tls-hostname" before 2.9. Delete as well.
Rephrase the remaining @tls-hostname contents for clarity.
Enum MigrationParameter mirrors the members of struct
MigrateSetParameters. Differences to MigrateSetParameters's member
documentation are pointless. Copy the new text to MigrationParameter.
MigrationParameters documentation issues:
* @tls-creds runs the two last sentences together without punctuation.
Fix that.
* Much of the contents on @tls-hostname only applies to setting
parameters, resulting in confusion. Replace by a suitable abridged
version of the new MigrateSetParameters text, and a note on
@tls-hostname omission in 2.8.
Additional damage is due to flawed doc fix commit
66fcb9d651 (qapi/migration: Add missing tls-authz documentation):
since it copied the missing MigrateSetParameters text from
MigrationParameters instead of MigrationParameter, the part on
recreating @tls-authz on the fly is missing. Copy that, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322135117.195489-2-armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
[Some typos corrected]
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
-----BEGIN PGP SIGNATURE-----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=lfZM
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu into staging
* Fix timeouts in Travis-CI jobs
* Mark devices with user_creatable = false that can crash QEMU otherwise
* Fix s390x TEST-AND-SET TCG instruction emulation
* Move pc955* devices to hw/gpio/
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmYBhdgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVcfA/9FulEN4HrjD3ObyboA+WfibXURwChui98
# 8LvL/fAGe3BZXQtspuNmPyrKRtIOrIwHJyFuxf2N5+8BuvGhEHQIuvIhQIj/rvfy
# X14KlldmQ3w3HlI3Ud4YiebLyK3AAFC2ApIywzFsnN+HoaHJR2EyDIb+T7OsGJZf
# ZLE/Z7qANxoNeZ+a3+rQR3SVpijyS3fXxDSaILrq2uW4kCCs/55O8Rt3Qb+PFSVd
# fF+OlpG6o+z73ACZc1u9Io4IO1ZZc/NdkmDTNz4HknkvJLTLF6kOECAxLl0ytgAG
# YRzBGKes29Zpa9wn/9rc75/OYNS0Ks+B19sQnijWUNX0zq5FkReXNXiyVcbT7d4p
# 6jFzlFnjj4ifB8uQkZTGcx/lL4s4VkPzF+f7fgHq9CKNrNsx8uca0TyQ8s4y+NGb
# C98kJdHd+QhCcuNnAbifCwuFaxQ8C4BdgzxVbU/sGDKNkINNkiTp+uue4TxnRKvV
# MfhqdnWRvqgZ0Rl4TxqcNfODK72Z1YNv3933OKE/mRJYS1Q529TIq4vfp8WIMsWQ
# 7+ipo4WKXhkiSOJZD6AkCoFum1W8yaDzUDJTw2Xt2bPBL3+FXcQyKkKVUMfzIJ8M
# KLe0Bb9W/pYU1ToTciTP0dkQF/02tG0Vik273445wPgH0x8OyHJkPF/ny1a7lKFO
# 5jreYdMxWdc=
# =lfZM
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Mar 2024 14:10:32 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-25' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Test TEST AND SET
target/s390x: Use mutable temporary value for op_ts
libqos/virtio.c: Correct 'flags' reading in qvirtqueue_kick
misc/pca955*: Move models under hw/gpio
aspeed: Make the ast1030-a1 SoC not user creatable
aspeed: Make the ast2600-a3 SoC not user creatable
hw/microblaze: Do not allow xlnx-zynqmp-pmu-soc to be created by the user
.travis.yml: Remove the unused xfslib-dev package
.travis.yml: Shorten the runtime of the problematic jobs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fabiano's patch to revert fd: support on mapped-ram
- Peter's fix on postcopy regression on unnecessary dirty syncs
- Fabiano's fix on mapped-ram rare corrupt on zero page handling
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZf2uIxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1waqTgD/RjaWrcUYlHcfFcWlEQGrYqikCtZYI+oW
YYdbLcCBOlQBAL/ecCbsFyaWyPnB1Eg3YFcj5g8AgogDHdg37HSxydgL
=aWGi
-----END PGP SIGNATURE-----
Merge tag 'migration-20240322-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.0-rc1
- Fabiano's patch to revert fd: support on mapped-ram
- Peter's fix on postcopy regression on unnecessary dirty syncs
- Fabiano's fix on mapped-ram rare corrupt on zero page handling
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZf2uIxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1waqTgD/RjaWrcUYlHcfFcWlEQGrYqikCtZYI+oW
# YYdbLcCBOlQBAL/ecCbsFyaWyPnB1Eg3YFcj5g8AgogDHdg37HSxydgL
# =aWGi
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 22 Mar 2024 16:13:23 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240322-pull-request' of https://gitlab.com/peterx/qemu:
migration/multifd: Fix clearing of mapped-ram zero pages
migration/postcopy: Fix high frequency sync
migration: Revert mapped-ram multifd support to fd: URI
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out that g_setenv() can fail and we don't
check for this in qtest_inproc_init(). In practice this will
only fail if a memory allocation failed in setenv() or if
the caller passed an invalid architecture name (e.g. one
with an '=' in it), so rather than requiring the callsite
to check for failure, make g_setenv() failure fatal here,
similarly to what we did in commit aca68d95c5.
Resolves: Coverity CID 1497485
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-8-peter.maydell@linaro.org
In test_compute_wait() we do
double units = bkt.max / 10;
which does an integer division and then assigns it to a double variable,
and similarly later on in the expression for an assertion.
Use 10.0 so that we do a floating point division and calculate the
exact value, rather than doing an integer division.
Spotted by Coverity.
Resolves: Coverity CID 1432564
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-7-peter.maydell@linaro.org
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240318202722.20675-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Otherwise TCG would assume the register that holds t1 would be constant
and reuse whenever it needs the value within it.
Cc: qemu-stable@nongnu.org
Fixes: f1ea739bd5 ("target/s390x: Use tcg_constant_* in local contexts")
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[iii: Adjust a newline and capitalization, add tags]
Signed-off-by: Ido Plat <ido.plat@ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240318202722.20675-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In qvirtqueue_kick(), the 'flags' were previously being incorrectly read from
vq->avail instead of the correct vq->used location. This update ensures 'flags'
are read from the correct location as per the virtio standard.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240320090442.267525-1-zheyuma97@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There's no way for the macio_nvram device to report failure to write
data, but we can at least report it to the user with error_report()
as we do in other devices like xlnx-efuse.
Spotted by Coverity.
Resolves: Coverity CID 1507628
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240312183810.557768-6-peter.maydell@linaro.org
In pca9554_get_pin() and pca9554_set_pin(), we try to detect an
incorrect pin value, but we get the condition wrong, using ">"
when ">=" was intended.
This has no actual effect, because in pca9554_initfn() we
use the correct test when creating the properties and so
we'll never be called with an out of range value. However,
Coverity complains about the mismatch between the check and
the later use of the pin value in a shift operation.
Use the correct condition.
Resolves: Coverity CID 1534917
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-5-peter.maydell@linaro.org
In net_init_af_xdp() we parse the arguments and allocate
a buffer of ints into sock_fds. However, although we
free this in the error exit path, we don't ever free it
in the successful return path. Coverity spots this leak.
Switch to g_autofree so we don't need to manually free the
array.
Resolves: Coverity CID 1534906
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-4-peter.maydell@linaro.org
In socket_check_afunix_support() we call socket(PF_UNIX, SOCK_STREAM, 0)
to see if it works, but we call close() on the result whether it
worked or not. Only close the fd if the socket() call succeeded.
Spotted by Coverity.
Resolves: Coverity CID 1497481
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-3-peter.maydell@linaro.org
In test_rx() and test_tx() we allocate a GString *cmd_line
but never free it. This is pretty harmless in a test case, but
Coverity spotted it.
Resolves: Coverity CID 1507122
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240312183810.557768-2-peter.maydell@linaro.org
Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: 356b230ed1 ("aspeed/soc : Add AST1030 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-2-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Aspeed SoCs are complex devices that can not be specified on the
command line. Fix that to avoid QEMU aborts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2227
Fixes: f25c0ae107 ("aspeed/soc: Add AST2600 support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240319150903.413662-1-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using xlnx-zynqmp-pmu-soc on the command line causes QEMU to crash:
./qemu-system-microblazeel -M petalogix-ml605 -device xlnx-zynqmp-pmu-soc
**
ERROR:tcg/tcg.c:813:tcg_register_thread: assertion failed: (n < tcg_max_ctxs)
Bail out!
Aborted (core dumped)
Mark the device with "user_creatable = false" to avoid that this can happen.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2229
Message-ID: <20240322183153.1023359-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Drop the "xfslibs-dev" package which should not be necessary anymore
since commit a5730b8bd3 ("block/file-posix: Simplify the XFS_IOC_DIOINFO
handling").
Message-ID: <20240320104144.823425-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "[s390x] GCC (other-system)" and the "[s390x] GCC check-tcg"
jobs are hitting the 50 minutes timeout in Travis quite frequently
since a while.
To fix it, we've got to drop a lot of the targets from the target
list in the jobs to make them work again.
With regards to the "check-tcg" test, we can move the check with
"s390x-linux-user" to the "user" job instead which also builds
the s390x-linux-user target.
And while we're at it, remove the "--enable-fdt=system" configure
switch (since this is not required nowadays anymore).
Message-ID: <20240320104144.823425-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the zero page detection is done in the multifd threads, we need
to iterate the second part of the pages->offset array and clear the
file bitmap for each zero page. The piece of code we merged to do that
is wrong.
The reason this has passed all the tests is because the bitmap is
initialized with zeroes already, so clearing the bits only really has
an effect during live migration and when a data page goes from having
data to no data.
Fixes: 303e6f54f9 ("migration/multifd: Implement zero page transmission on the multifd thread.")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240321201242.6009-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
