Commit Graph

452 Commits

Author SHA1 Message Date
Richard Henderson bad729e272 tcg: Pass data argument to restore_state_to_opc
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments.  Transition restore_state_to_opc to use
data from the latter.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:51 +11:00
Richard Henderson 190ce7fbc7 tcg: Add TCG_MAX_INSNS
Adjust all translators to respect it.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:50 +11:00
Richard Henderson 52e971d9ff target-arm: Add condexec state to insn_start
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:46 +11:00
Richard Henderson b933066ae0 target-*: Introduce and use cpu_breakpoint_test
Reduce the boilerplate required for each target.  At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.

Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:28 +11:00
Richard Henderson 959082fc4a target-*: Increment num_insns immediately after tcg_gen_insn_start
This does tidy the icount test common to all targets.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:27 +11:00
Richard Henderson 667b8e29c5 target-*: Unconditionally emit tcg_gen_insn_start
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc.  This puts gen_io_start et al on the
"correct" side of the marker.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:27 +11:00
Richard Henderson 765b842ade tcg: Rename debug_insn_start to insn_start
With an eye toward making it mandatory.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:36:26 +11:00
Richard Henderson 9305eac09e target-arm: Handle always condition codes within arm_test_cc
Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator.  The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Richard Henderson 6c2c63d3a0 target-arm: Introduce DisasCompare
Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Richard Henderson 78bcaa3e37 target-arm: Share all common TCG temporaries
This is a bug fix for aarch64.  At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F.  From
the view of the TCG code generator, these are unrelated variables.

The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch.  Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.

There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.

Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 14:39:47 +01:00
Daniel P. Berrange b6af097528 maint: remove / fix many doubled words
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Sergey Sorokin cef9ee7067 target-arm: Fix default_exception_el() function for the case when EL3 is not supported
If EL3 is not supported in current configuration,
we should not try to get EL3 bitness.

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1441208342-10601-2-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08 17:38:44 +01:00
Richard Henderson ecc7b3aa71 tcg: Remove tcg_gen_trunc_i64_i32
Replacing it with tcg_gen_extrl_i64_i32.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:10:54 -07:00
Peter Maydell c87e5a61c2 target-arm: Implement YIELD insn to yield in ARM and Thumb translators
Implement the YIELD instruction in the ARM and Thumb translators to
actually yield control back to the top level loop rather than being
a simple no-op. (We already do this for A64.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1435672316-3311-3-git-send-email-peter.maydell@linaro.org
2015-07-06 10:05:44 +01:00
Peter Crosthwaite d49190c420 disas: Remove uses of CPU env
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-22 17:40:01 +02:00
Peter Maydell 3977ee5d7a target-arm: Correct "preferred return address" for cpreg access exceptions
The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)

This fixes https://bugs.launchpad.net/qemu/+bug/1463338

Reported-by: Robert Buhren <robert@robertbuhren.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
2015-06-15 18:06:11 +01:00
Aurelio C. Remonda 62b44f059a target-arm: Add the THUMB_DSP feature
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of
the 85 DSP instructions (these are all Thumb2). This is enabled for
all non-M-profile CPUs with Thumb2 support, as the instructions are
mandatory for R and A profiles. On M profile they are optional and
not present in the Cortex-M3 (though they are in the M4).

The effect of this commit is that we will now treat the DSP
encodings as illegal instructions on M3, when previously we
incorrectly implemented them.

Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com
[PMM: added clz/crc32/crc32c and default case to the early-decode switch;
 minor format/spacing fixups; reworded commit message a bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 18:06:09 +01:00
Peter Maydell 3960c336ad target-arm: Avoid buffer overrun on UNPREDICTABLE ldrd/strd
A LDRD or STRD where rd is not an even number is UNPREDICTABLE.
We were letting this fall through, which is OK unless rd is 15,
in which case we would attempt to do a load_reg or store_reg
to a nonexistent r16 for the second half of the double-word.
Catch the odd-numbered-rd cases and UNDEF them instead.

To do this we rearrange the structure of the code a little
so we can put the UNDEF catches at the top before we've
allocated TCG temporaries.

Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431348973-21315-1-git-send-email-peter.maydell@linaro.org
2015-05-29 11:29:00 +01:00
Peter Maydell 84549b6dcf target-arm: Don't halt on WFI unless we don't have any work
Just NOP the WFI instruction if we have work to do.
This doesn't make much difference currently (though it does avoid
jumping out to the top level loop and immediately restarting),
but the distinction between "halt" and "don't halt" will become
more important when the decision to halt requires us to trap
to a higher exception level instead.

Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:53 +01:00
Greg Bellows 9dbbc748d6 target-arm: Extend FP checks to use an EL
Extend the ARM disassemble context to take a target exception EL instead of a
boolean enable. This change reverses the polarity of the check making a value
of 0 indicate floating point enabled (no exception).

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: Use a common TB flag field for AArch32 and AArch64;
 CPTR_EL2 exists in v7; CPTR_EL2 should trap for EL2 accesses;
 CPTR_EL2 should not trap for secure accesses; CPTR_EL3
 should trap for EL3 accesses; CPACR traps for secure
 accesses should trap to EL3 if EL3 is AArch32]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-05-29 11:28:53 +01:00
Greg Bellows 7371036198 target-arm: Add exception target el infrastructure
Add a CPU state exception target EL field that will be used for communicating
the EL to which an exception should be routed.

Add a disassembly context field for tracking the EL3 architecture needed for
determining the target exception EL.

Add a target EL argument to the generic exception helper for callers to specify
the EL to which the exception should be routed.  Extended the helper to set
the newly added CPU state exception target el.

Added a function for setting the target exception EL and updated calls to helpers
to call it.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:50 +01:00
Peter Maydell da3e53ddcb target-arm: Fix handling of STM (user) with r15 in register list
The A32 encoding of LDM distinguishes LDM (user) from LDM (exception
return) based on whether r15 is in the register list. However for
STM (user) there is no equivalent distinction. We were incorrectly
treating "r15 in list" as indicating exception return for both LDM
and STM, with the result that an STM (user) involving r15 went into
an infinite loop. Fix this; note that the value stored for r15
in this case is the current PC regardless of our current mode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426015125-5521-1-git-send-email-peter.maydell@linaro.org
2015-03-16 12:30:47 +00:00
Richard Henderson 42a268c241 tcg: Change translator-side labels to a pointer
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.

Note that the code generating backends still manipulate labels as int.

With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13 12:28:18 -07:00
Richard Henderson fe700adb3d tcg: Introduce tcg_op_buf_count and tcg_op_buf_full
The method by which we count the number of ops emitted
is going to change.  Abstract that away into some inlines.

Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12 21:21:38 -08:00
Richard Henderson 0a7df5da98 tcg: Move emit of INDEX_op_end into gen_tb_end
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12 21:21:38 -08:00
Peter Maydell 579d21cce6 target-arm: Use correct mmu_idx for unprivileged loads and stores
The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
 * for A64, it should be "if at EL1, access as if EL0; otherwise
   access at current EL"
 * for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
   access as if at EL0".

In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
2015-02-05 13:37:23 +00:00
Peter Maydell c1e3781090 target-arm: Define correct mmu_idx values and pass them in TB flags
We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.

Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.

This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
---
This leaves some odd gaps in the TB flags usage. I will circle
back and clean this up later (including moving the other common
flags like the singlestep ones to the top of the flags word),
but I didn't want to bloat this patchseries further.
2015-02-05 13:37:23 +00:00
Kirill Batuzov 45140a5767 target-arm: check that LSB <= MSB in BFI instruction
The documentation states that if LSB > MSB in BFI instruction behaviour
is unpredictable. Currently QEMU crashes because of assertion failure in
this case:

tcg/tcg-op.h:2061: tcg_gen_deposit_i32: Assertion `len <= 32' failed.

While assertion failure may meet the "unpredictable" definition this
behaviour is undesirable because it allows an unprivileged guest program
to crash the emulator with the OS and other programs.

This patch addresses the issue by throwing illegal instruction exception
if LSB > MSB. Only ARM decoder is affected because Thumb decoder already
has this check in place.

To reproduce issue run the following program

int main(void) {
    asm volatile (".long 0x07c00c12" :: );
    return 0;
}

compiled with
  gcc -marm -static badop_arm.c -o badop_arm

Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05 13:37:22 +00:00
Paolo Bonzini cd42d5b236 gen-icount: check cflags instead of use_icount global
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03 09:22:12 +01:00
Paolo Bonzini bd79255d25 translate: check cflags instead of use_icount global
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03 09:22:10 +01:00
Peter Maydell 51a79b0397 target-arm: add secure state bit to CPREG hash
Added additional NS-bit to CPREG hash encoding.  Updated hash lookup
locations to specify hash bit currently set to non-secure.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-7-git-send-email-greg.bellows@linaro.org
[PMM: fix uses of ENCODE_CP_REG in kvm32.c to add extra argument]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11 12:07:49 +00:00
Sergey Fedorov 3f342b9e0e target-arm: add non-secure Translation Block flag
This patch is based on idea found in patch at
git://github.com/jowinter/qemu-trustzone.git
f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by
Johannes Winter <johannes.winter@iaik.tugraz.at>.

The TBFLAG captures the SCR NS secure state at the time when a TB is created so
the correct bank is accessed on system register accesses.

Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-11 12:07:48 +00:00
Peter Maydell f4df22102a target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn()
Refactor to avoid passing a CPUARMState * to disas_arm_insn(). To do this
we move the "read insn from memory" code to the callsite and pass the
insn to the function instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04 12:05:11 +00:00
Peter Maydell 7dcc1f894d target-arm/translate.c: Don't pass CPUARMState around in the decoder
Passing the CPUARMState around in the decoder is a recipe for
bugs where we accidentally generate code that depends on CPU
state which isn't reflected in the TB flags. Stop doing this
and instead use DisasContext as a way to pass around those
bits of CPU state which are known to be safe to use.

This commit simply removes initial "CPUARMState *env" parameters
from various function definitions, and removes the initial "env"
argument from the places where those functions are called.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04 12:05:06 +00:00
Peter Maydell b53d8923a5 target-arm/translate.c: Don't use IS_M()
Instead of using IS_M(), use arm_dc_feature(s, ARM_FEATURE_M), so we
don't need to pass CPUARMState pointers around the decoder.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-4-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04 12:05:03 +00:00
Peter Maydell d614a51378 target-arm/translate.c: Use arm_dc_feature() rather than arm_feature()
Use arm_dc_feature() rather than arm_feature() to avoid using
CPUARMState unnecessarily.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04 12:04:25 +00:00
Peter Maydell 2b51668fca target-arm/translate.c: Use arm_dc_feature() in ENABLE_ARCH_ macros
All the places where we use the ENABLE_ARCH_* and ARCH() macros have a
DisasContext* s, so switch them over to use arm_dc_feature() rather than
arm_feature() so we don't need to pass the CPUARMState* env around too.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1414524244-20316-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2014-11-04 00:39:16 +00:00
Greg Bellows dcbff19bd0 target-arm: rename arm_current_pl to arm_current_el
Renamed the arm_current_pl CPU function to more accurately represent that it
returns the ARMv8 EL rather than ARMv7 PL.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1413910544-20150-5-git-send-email-greg.bellows@linaro.org
[PMM: fixed a minor merge resolution error in a couple of hunks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-24 12:19:14 +01:00
Peter Maydell 23adb8618c target-arm: correctly UNDEF writes to FPINST/FPINST2 from EL0
The ARM ARM requires that the FPINST and FPINST2 VFP control
registers are not accessible to code at EL0. We were already
correctly implementing this for reads of these registers; add
the missing check for the write code path.

Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1412967447-20931-1-git-send-email-peter.maydell@linaro.org
2014-10-24 12:19:14 +01:00
Peter Maydell 37e6456ef5 target-arm: Add support for A32 and T32 HVC and SMC insns
Add support for HVC and SMC instructions to the A32 and
T32 decoder. Using these for real exceptions to EL2 or EL3
is currently not supported (the do_interrupt routine does
not handle them) but we require the instruction support to
implement PSCI.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1412865028-17725-6-git-send-email-peter.maydell@linaro.org
2014-10-24 12:19:13 +01:00
Peter Maydell c0f4af1719 target-arm: Don't handle c15_cpar changes via tb_flush()
At the moment we try to handle c15_cpar with the strategy of:
 * emit generated code which makes assumptions about its value
 * when the register value changes call tb_flush() to throw
   away the now-invalid generated code
This works because XScale CPUs are always uniprocessor, but
it's confusing because it suggests that the same approach can
be taken for other registers. It also means we do a tb_flush()
on CPU reset, which makes multithreaded linux-user binaries
even more likely to fail than would otherwise be the case.

Replace it with a combination of TB flags for the access
checks done on cp0/cp1 for the XScale and iwMMXt instructions,
plus a runtime check for cp2..cp13 coprocessor accesses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1411056959-23070-1-git-send-email-peter.maydell@linaro.org
2014-09-29 18:48:48 +01:00
Peter Maydell 50225ad0c1 target-arm: Implement ARMv8 single-stepping for AArch32 code
ARMv8 single-stepping requires the exception level that controls
the single-stepping to be in AArch64 execution state, but the
code being stepped may be in AArch64 or AArch32. Implement the
necessary support code for single-stepping AArch32 code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19 19:02:03 +01:00
Peter Maydell 4051e12c5d target-arm: Don't allow AArch32 to access RES0 CPSR bits
The CPSR has a new-in-v8 execution state bit (IL), and
also some state which has effects in AArch32 but appears
only in the SPSR format (SS) but is RES0 in the CPSR.

Add the IL bit to CPSR_EXEC, and enforce that guest direct
reads and writes to CPSR can't read or write the RES0
bits, so the guest can't get at the SS bit which we store
in uncached_cpsr. This includes not permitting exception
returns to copy reserved bits from an SPSR into CPSR.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19 19:02:03 +01:00
Lluís Vilanova a7e30d84ce trace: [tcg] Include TCG-tracing header on all targets
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12 14:26:12 +01:00
Peter Maydell 3b1a413812 target-arm: Delete unused iwmmxt_msadb helper
The iwmmxt_msadb helper and its corresponding gen function are unused;
delete them. (This function appears to have never been used right back
to the initial implementation of iwMMXt; it is identical to iwmmxt_madduq,
and is presumably an accidental remnant from the initial development.)

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401822125-1822-1-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:12 +01:00
Peter Maydell aa633469ed target-arm: A32/T32: Mask CRC value in calling code, not helper
Bring the 32-bit CRC helper functions into line with the A64 ones,
by masking the high bytes of the value in the calling code rather
than the helper. This is more efficient since we can determine the
mask at translation time.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401458125-27977-7-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:12 +01:00
Peter Maydell 4e624edaeb target-arm: add support for v8 VMULL.P64 instruction
Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication
instruction in the A32/T32 instruction sets; this is part of the v8
Crypto Extensions.

To do this we have to move the neon_pmull_64_{lo,hi} helpers from
helper-a64.c into neon_helper.c so they can be used by the AArch32
translator.

Inspired-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:11 +01:00
Peter Maydell 526d0096e5 target-arm: Allow 3reg_wide undefreq to encode more bad size options
The current undefreq field in the neon_3reg_wide handling allows us
to encode "UNDEF if size != 0" and "UNDEF if size == 0". This is
no longer sufficient with the advent of 64-bit polynomial VMULL,
which means we want to UNDEF if size == 1. Change the undefreq
encoding to use separate bits for all of "UNDEF if size == 0",
"UNDEF if size == 1" and "UNDEF if size == 2".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-3-git-send-email-peter.maydell@linaro.org
2014-06-09 16:06:11 +01:00
Ard Biesheuvel f1ecb913d8 target-arm: add support for v8 SHA1 and SHA256 instructions
This adds support for the SHA1 and SHA256 instructions that are available
on some v8 implementations of Aarch32.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-2-git-send-email-peter.maydell@linaro.org
[PMM:
 * rebase
 * fix bad indent
 * add a missing UNDEF check for Q!=1 in the 3-reg SHA1/SHA256 case
 * use g_assert_not_reached()
 * don't re-extract bit 6 for the 2-reg-misc encodings
 * set the ELF HWCAP2 bits for the new features
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09 16:06:11 +01:00
Paolo Bonzini 1d854765df target-arm: move arm_*_code to a separate file
These will soon require cpu_ldst.h, so move them out of cpu.h.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:33 +02:00