The QEMU build system architecture ================================== This document aims to help developers understand the architecture of the QEMU build system. As with projects using GNU autotools, the QEMU build system has two stages, first the developer runs the "configure" script to determine the local build environment characteristics, then they run "make" to build the project. There is about where the similarities with GNU autotools end, so try to forget what you know about them. Stage 1: configure ================== The QEMU configure script is written directly in shell, and should be compatible with any POSIX shell, hence it uses #!/bin/sh. An important implication of this is that it is important to avoid using bash-isms on development platforms where bash is the primary host. In contrast to autoconf scripts, QEMU's configure is expected to be silent while it is checking for features. It will only display output when an error occurs, or to show the final feature enablement summary on completion. Adding new checks to the configure script usually comprises the following tasks: - Initialize one or more variables with the default feature state. Ideally features should auto-detect whether they are present, so try to avoid hardcoding the initial state to either enabled or disabled, as that forces the user to pass a --enable-XXX / --disable-XXX flag on every invocation of configure. - Add support to the command line arg parser to handle any new --enable-XXX / --disable-XXX flags required by the feature XXX. - Add information to the help output message to report on the new feature flag. - Add code to perform the actual feature check. As noted above, try to be fully dynamic in checking enablement/disablement. - Add code to print out the feature status in the configure summary upon completion. - Add any new makefile variables to $config_host_mak on completion. Taking (a simplified version of) the probe for gnutls from configure, we have the following pieces: # Initial variable state gnutls="" ..snip.. # Configure flag processing --disable-gnutls) gnutls="no" ;; --enable-gnutls) gnutls="yes" ;; ..snip.. # Help output feature message gnutls GNUTLS cryptography support ..snip.. # Test for gnutls if test "$gnutls" != "no"; then if ! $pkg_config --exists "gnutls"; then gnutls_cflags=`$pkg_config --cflags gnutls` gnutls_libs=`$pkg_config --libs gnutls` libs_softmmu="$gnutls_libs $libs_softmmu" libs_tools="$gnutls_libs $libs_tools" QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags" gnutls="yes" elif test "$gnutls" = "yes"; then feature_not_found "gnutls" "Install gnutls devel" else gnutls="no" fi fi ..snip.. # Completion feature summary echo "GNUTLS support $gnutls" ..snip.. # Define make variables if test "$gnutls" = "yes" ; then echo "CONFIG_GNUTLS=y" >> $config_host_mak fi Helper functions ---------------- The configure script provides a variety of helper functions to assist developers in checking for system features: - do_cc $ARGS... Attempt to run the system C compiler passing it $ARGS... - do_cxx $ARGS... Attempt to run the system C++ compiler passing it $ARGS... - compile_object $CFLAGS Attempt to compile a test program with the system C compiler using $CFLAGS. The test program must have been previously written to a file called $TMPC. - compile_prog $CFLAGS $LDFLAGS Attempt to compile a test program with the system C compiler using $CFLAGS and link it with the system linker using $LDFLAGS. The test program must have been previously written to a file called $TMPC. - has $COMMAND Determine if $COMMAND exists in the current environment, either as a shell builtin, or executable binary, returning 0 on success. - path_of $COMMAND Return the fully qualified path of $COMMAND, printing it to stdout, and returning 0 on success. - check_define $NAME Determine if the macro $NAME is defined by the system C compiler - check_include $NAME Determine if the include $NAME file is available to the system C compiler - write_c_skeleton Write a minimal C program main() function to the temporary file indicated by $TMPC - feature_not_found $NAME $REMEDY Print a message to stderr that the feature $NAME was not available on the system, suggesting the user try $REMEDY to address the problem. - error_exit $MESSAGE $MORE... Print $MESSAGE to stderr, followed by $MORE... and then exit from the configure script with non-zero status - query_pkg_config $ARGS... Run pkg-config passing it $ARGS. If QEMU is doing a static build, then --static will be automatically added to $ARGS Stage 2: makefiles ================== The use of GNU make is required with the QEMU build system. Although the source code is spread across multiple subdirectories, the build system should be considered largely non-recursive in nature, in contrast to common practices seen with automake. There is some recursive invocation of make, but this is related to the things being built, rather than the source directory structure. QEMU currently supports both VPATH and non-VPATH builds, so there are three general ways to invoke configure & perform a build. - VPATH, build artifacts outside of QEMU source tree entirely cd ../ mkdir build cd build ../qemu/configure make - VPATH, build artifacts in a subdir of QEMU source tree mkdir build cd build ../configure make - non-VPATH, build artifacts everywhere ./configure make The QEMU maintainers generally recommend that a VPATH build is used by developers. Patches to QEMU are expected to ensure VPATH build still works. Module structure ---------------- There are a number of key outputs of the QEMU build system: - Tools - qemu-img, qemu-nbd, qga (guest agent), etc - System emulators - qemu-system-$ARCH - Userspace emulators - qemu-$ARCH - Unit tests The source code is highly modularized, split across many files to facilitate building of all of these components with as little duplicated compilation as possible. There can be considered to be two distinct groups of files, those which are independent of the QEMU emulation target and those which are dependent on the QEMU emulation target. In the target-independent set lives various general purpose helper code, such as error handling infrastructure, standard data structures, platform portability wrapper functions, etc. This code can be compiled once only and the .o files linked into all output binaries. In the target-dependent set lives CPU emulation, device emulation and much glue code. This sometimes also has to be compiled multiple times, once for each target being built. The utility code that is used by all binaries is built into a static archive called libqemuutil.a, which is then linked to all the binaries. In order to provide hooks that are only needed by some of the binaries, code in libqemuutil.a may depend on other functions that are not fully implemented by all QEMU binaries. Dummy stubs for all these functions are also provided by this library, and will only be linked into the binary if the real implementation is not present. In a way, the stubs can be thought of as a portable implementation of the weak symbols concept. All binaries should link to libqemuutil.a, e.g.: qemu-img$(EXESUF): qemu-img.o ..snip.. libqemuutil.a Windows platform portability ---------------------------- On Windows, all binaries have the suffix '.exe', so all Makefile rules which create binaries must include the $(EXESUF) variable on the binary name. e.g. qemu-img$(EXESUF): qemu-img.o ..snip.. This expands to '.exe' on Windows, or '' on other platforms. A further complication for the system emulator binaries is that two separate binaries need to be generated. The main binary (e.g. qemu-system-x86_64.exe) is linked against the Windows console runtime subsystem. These are expected to be run from a command prompt window, and so will print stderr to the console that launched them. The second binary generated has a 'w' on the end of its name (e.g. qemu-system-x86_64w.exe) and is linked against the Windows graphical runtime subsystem. These are expected to be run directly from the desktop and will open up a dedicated console window for stderr output. The Makefile.target will generate the binary for the graphical subsystem first, and then use objcopy to relink it against the console subsystem to generate the second binary. Object variable naming ---------------------- The QEMU convention is to define variables to list different groups of object files. These are named with the convention $PREFIX-obj-y. For example the libqemuutil.a file will be linked with all objects listed in a variable 'util-obj-y'. So, for example, util/Makefile.obj will contain a set of definitions looking like util-obj-y += bitmap.o bitops.o hbitmap.o util-obj-y += fifo8.o util-obj-y += acl.o util-obj-y += error.o qemu-error.o When there is an object file which needs to be conditionally built based on some characteristic of the host system, the configure script will define a variable for the conditional. For example, on Windows it will define $(CONFIG_POSIX) with a value of 'n' and $(CONFIG_WIN32) with a value of 'y'. It is now possible to use the config variables when listing object files. For example, util-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o util-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o On Windows this expands to util-obj-y += oslib-win32.o qemu-thread-win32.o util-obj-n += oslib-posix.o qemu-thread-posix.o Since libqemutil.a links in $(util-obj-y), the POSIX specific files listed against $(util-obj-n) are ignored on the Windows platform builds. CFLAGS / LDFLAGS / LIBS handling -------------------------------- There are many different binaries being built with differing purposes, and some of them might even be 3rd party libraries pulled in via git submodules. As such the use of the global CFLAGS variable is generally avoided in QEMU, since it would apply to too many build targets. Flags that are needed by any QEMU code (i.e. everything *except* GIT submodule projects) are put in $(QEMU_CFLAGS) variable. For linker flags the $(LIBS) variable is sometimes used, but a couple of more targeted variables are preferred. $(libs_softmmu) is used for libraries that must be linked to system emulator targets, $(LIBS_TOOLS) is used for tools like qemu-img, qemu-nbd, etc and $(LIBS_QGA) is used for the QEMU guest agent. There is currently no specific variable for the userspace emulator targets as the global $(LIBS), or more targeted variables shown below, are sufficient. In addition to these variables, it is possible to provide cflags and libs against individual source code files, by defining variables of the form $FILENAME-cflags and $FILENAME-libs. For example, the curl block driver needs to link to the libcurl library, so block/Makefile defines some variables: curl.o-cflags := $(CURL_CFLAGS) curl.o-libs := $(CURL_LIBS) The scope is a little different between the two variables. The libs get used when linking any target binary that includes the curl.o object file, while the cflags get used when compiling the curl.c file only. Statically defined files ------------------------ The following key files are statically defined in the source tree, with the rules needed to build QEMU. Their behaviour is influenced by a number of dynamically created files listed later. - Makefile The main entry point used when invoking make to build all the components of QEMU. The default 'all' target will naturally result in the build of every component. The various tools and helper binaries are built directly via a non-recursive set of rules. Each system/userspace emulation target needs to have a slightly different set of make rules / variables. Thus, make will be recursively invoked for each of the emulation targets. The recursive invocation will end up processing the toplevel Makefile.target file (more on that later). - */Makefile.objs Since the source code is spread across multiple directories, the rules for each file are similarly modularized. Thus each subdirectory containing .c files will usually also contain a Makefile.objs file. These files are not directly invoked by a recursive make, but instead they are imported by the top level Makefile and/or Makefile.target Each Makefile.objs usually just declares a set of variables listing the .o files that need building from the source files in the directory. They will also define any custom linker or compiler flags. For example in block/Makefile.objs block-obj-$(CONFIG_LIBISCSI) += iscsi.o block-obj-$(CONFIG_CURL) += curl.o ..snip... iscsi.o-cflags := $(LIBISCSI_CFLAGS) iscsi.o-libs := $(LIBISCSI_LIBS) curl.o-cflags := $(CURL_CFLAGS) curl.o-libs := $(CURL_LIBS) If there are any rules defined in the Makefile.objs file, they should all use $(obj) as a prefix to the target, e.g. $(obj)/generated-tcg-tracers.h: $(obj)/generated-tcg-tracers.h-timestamp - Makefile.target This file provides the entry point used to build each individual system or userspace emulator target. Each enabled target has its own subdirectory. For example if configure is run with the argument '--target-list=x86_64-softmmu', then a sub-directory 'x86_64-softmu' will be created, containing a 'Makefile' which symlinks back to Makefile.target So when the recursive '$(MAKE) -C x86_64-softmmu' is invoked, it ends up using Makefile.target for the build rules. - rules.mak This file provides the generic helper rules for invoking build tools, in particular the compiler and linker. This also contains the magic (hairy) 'unnest-vars' function which is used to merge the variable definitions from all Makefile.objs in the source tree down into the main Makefile context. - default-configs/*.mak The files under default-configs/ control what emulated hardware is built into each QEMU system and userspace emulator targets. They merely contain a long list of config variable definitions. For example, default-configs/x86_64-softmmu.mak has: include pci.mak include sound.mak include usb.mak CONFIG_QXL=$(CONFIG_SPICE) CONFIG_VGA_ISA=y CONFIG_VGA_CIRRUS=y CONFIG_VMWARE_VGA=y CONFIG_VIRTIO_VGA=y ...snip... These files rarely need changing unless new devices / hardware need to be enabled for a particular system/userspace emulation target - tests/Makefile Rules for building the unit tests. This file is included directly by the top level Makefile, so anything defined in this file will influence the entire build system. Care needs to be taken when writing rules for tests to ensure they only apply to the unit test execution / build. - tests/docker/Makefile.include Rules for Docker tests. Like tests/Makefile, this file is included directly by the top level Makefile, anything defined in this file will influence the entire build system. - po/Makefile Rules for building and installing the binary message catalogs from the text .po file sources. This almost never needs changing for any reason. Dynamically created files ------------------------- The following files are generated dynamically by configure in order to control the behaviour of the statically defined makefiles. This avoids the need for QEMU makefiles to go through any pre-processing as seen with autotools, where Makefile.am generates Makefile.in which generates Makefile. - config-host.mak When configure has determined the characteristics of the build host it will write a long list of variables to config-host.mak file. This provides the various install directories, compiler / linker flags and a variety of CONFIG_* variables related to optionally enabled features. This is imported by the top level Makefile in order to tailor the build output. The variables defined here are those which are applicable to all QEMU build outputs. Variables which are potentially different for each emulator target are defined by the next file... It is also used as a dependency checking mechanism. If make sees that the modification timestamp on configure is newer than that on config-host.mak, then configure will be re-run. - config-host.h The config-host.h file is used by source code to determine what features are enabled. It is generated from the contents of config-host.mak using the scripts/create_config program. This extracts all the CONFIG_* variables, most of the HOST_* variables and a few other misc variables from config-host.mak, formatting them as C preprocessor macros. - $TARGET-NAME/config-target.mak TARGET-NAME is the name of a system or userspace emulator, for example, x86_64-softmmu denotes the system emulator for the x86_64 architecture. This file contains the variables which need to vary on a per-target basis. For example, it will indicate whether KVM or Xen are enabled for the target and any other potential custom libraries needed for linking the target. - $TARGET-NAME/config-devices.mak TARGET-NAME is again the name of a system or userspace emulator. The config-devices.mak file is automatically generated by make using the scripts/make_device_config.sh program, feeding it the default-configs/$TARGET-NAME file as input. - $TARGET-NAME/Makefile This is the entrypoint used when make recurses to build a single system or userspace emulator target. It is merely a symlink back to the Makefile.target in the top level. Useful make targets =================== - help Print a help message for the most common build targets. - print-VAR Print the value of the variable VAR. Useful for debugging the build system.