qemu-e2k/hw/isa/piix3.c
Bernhard Beschow f0bc6bf725 hw/i386/pc: Create RTC controllers in south bridges
Just like in the real hardware (and in PIIX4), create the RTC
controllers in the south bridges.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230519084734.220480-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19 10:30:46 -04:00

448 lines
12 KiB
C

/*
* QEMU PIIX PCI ISA Bridge Emulation
*
* Copyright (c) 2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qemu/range.h"
#include "qapi/error.h"
#include "hw/dma/i8257.h"
#include "hw/southbridge/piix.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "hw/isa/isa.h"
#include "hw/xen/xen.h"
#include "sysemu/runstate.h"
#include "migration/vmstate.h"
#include "hw/acpi/acpi_aml_interface.h"
#define XEN_PIIX_NUM_PIRQS 128ULL
static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
{
qemu_set_irq(piix3->pic[pic_irq],
!!(piix3->pic_levels &
(((1ULL << PIIX_NUM_PIRQS) - 1) <<
(pic_irq * PIIX_NUM_PIRQS))));
}
static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level)
{
int pic_irq;
uint64_t mask;
pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
if (pic_irq >= PIIX_NUM_PIC_IRQS) {
return;
}
mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq);
piix3->pic_levels &= ~mask;
piix3->pic_levels |= mask * !!level;
}
static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level)
{
int pic_irq;
pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq];
if (pic_irq >= PIIX_NUM_PIC_IRQS) {
return;
}
piix3_set_irq_level_internal(piix3, pirq, level);
piix3_set_irq_pic(piix3, pic_irq);
}
static void piix3_set_irq(void *opaque, int pirq, int level)
{
PIIX3State *piix3 = opaque;
piix3_set_irq_level(piix3, pirq, level);
}
static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin)
{
PIIX3State *piix3 = opaque;
int irq = piix3->dev.config[PIIX_PIRQCA + pin];
PCIINTxRoute route;
if (irq < PIIX_NUM_PIC_IRQS) {
route.mode = PCI_INTX_ENABLED;
route.irq = irq;
} else {
route.mode = PCI_INTX_DISABLED;
route.irq = -1;
}
return route;
}
/* irq routing is changed. so rebuild bitmap */
static void piix3_update_irq_levels(PIIX3State *piix3)
{
PCIBus *bus = pci_get_bus(&piix3->dev);
int pirq;
piix3->pic_levels = 0;
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
piix3_set_irq_level(piix3, pirq, pci_bus_get_irq_level(bus, pirq));
}
}
static void piix3_write_config(PCIDevice *dev,
uint32_t address, uint32_t val, int len)
{
pci_default_write_config(dev, address, val, len);
if (ranges_overlap(address, len, PIIX_PIRQCA, 4)) {
PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
int pic_irq;
pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev));
piix3_update_irq_levels(piix3);
for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) {
piix3_set_irq_pic(piix3, pic_irq);
}
}
}
static void piix3_write_config_xen(PCIDevice *dev,
uint32_t address, uint32_t val, int len)
{
int i;
/* Scan for updates to PCI link routes (0x60-0x63). */
for (i = 0; i < len; i++) {
uint8_t v = (val >> (8 * i)) & 0xff;
if (v & 0x80) {
v = 0;
}
v &= 0xf;
if (((address + i) >= PIIX_PIRQCA) && ((address + i) <= PIIX_PIRQCD)) {
xen_set_pci_link_route(address + i - PIIX_PIRQCA, v);
}
}
piix3_write_config(dev, address, val, len);
}
static void piix3_reset(DeviceState *dev)
{
PIIX3State *d = PIIX3_PCI_DEVICE(dev);
uint8_t *pci_conf = d->dev.config;
pci_conf[0x04] = 0x07; /* master, memory and I/O */
pci_conf[0x05] = 0x00;
pci_conf[0x06] = 0x00;
pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */
pci_conf[0x4c] = 0x4d;
pci_conf[0x4e] = 0x03;
pci_conf[0x4f] = 0x00;
pci_conf[0x60] = 0x80;
pci_conf[0x61] = 0x80;
pci_conf[0x62] = 0x80;
pci_conf[0x63] = 0x80;
pci_conf[0x69] = 0x02;
pci_conf[0x70] = 0x80;
pci_conf[0x76] = 0x0c;
pci_conf[0x77] = 0x0c;
pci_conf[0x78] = 0x02;
pci_conf[0x79] = 0x00;
pci_conf[0x80] = 0x00;
pci_conf[0x82] = 0x00;
pci_conf[0xa0] = 0x08;
pci_conf[0xa2] = 0x00;
pci_conf[0xa3] = 0x00;
pci_conf[0xa4] = 0x00;
pci_conf[0xa5] = 0x00;
pci_conf[0xa6] = 0x00;
pci_conf[0xa7] = 0x00;
pci_conf[0xa8] = 0x0f;
pci_conf[0xaa] = 0x00;
pci_conf[0xab] = 0x00;
pci_conf[0xac] = 0x00;
pci_conf[0xae] = 0x00;
d->pic_levels = 0;
d->rcr = 0;
}
static int piix3_post_load(void *opaque, int version_id)
{
PIIX3State *piix3 = opaque;
int pirq;
/*
* Because the i8259 has not been deserialized yet, qemu_irq_raise
* might bring the system to a different state than the saved one;
* for example, the interrupt could be masked but the i8259 would
* not know that yet and would trigger an interrupt in the CPU.
*
* Here, we update irq levels without raising the interrupt.
* Interrupt state will be deserialized separately through the i8259.
*/
piix3->pic_levels = 0;
for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) {
piix3_set_irq_level_internal(piix3, pirq,
pci_bus_get_irq_level(pci_get_bus(&piix3->dev), pirq));
}
return 0;
}
static int piix3_pre_save(void *opaque)
{
int i;
PIIX3State *piix3 = opaque;
for (i = 0; i < ARRAY_SIZE(piix3->pci_irq_levels_vmstate); i++) {
piix3->pci_irq_levels_vmstate[i] =
pci_bus_get_irq_level(pci_get_bus(&piix3->dev), i);
}
return 0;
}
static bool piix3_rcr_needed(void *opaque)
{
PIIX3State *piix3 = opaque;
return (piix3->rcr != 0);
}
static const VMStateDescription vmstate_piix3_rcr = {
.name = "PIIX3/rcr",
.version_id = 1,
.minimum_version_id = 1,
.needed = piix3_rcr_needed,
.fields = (VMStateField[]) {
VMSTATE_UINT8(rcr, PIIX3State),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_piix3 = {
.name = "PIIX3",
.version_id = 3,
.minimum_version_id = 2,
.post_load = piix3_post_load,
.pre_save = piix3_pre_save,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(dev, PIIX3State),
VMSTATE_INT32_ARRAY_V(pci_irq_levels_vmstate, PIIX3State,
PIIX_NUM_PIRQS, 3),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription*[]) {
&vmstate_piix3_rcr,
NULL
}
};
static void rcr_write(void *opaque, hwaddr addr, uint64_t val, unsigned len)
{
PIIX3State *d = opaque;
if (val & 4) {
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
return;
}
d->rcr = val & 2; /* keep System Reset type only */
}
static uint64_t rcr_read(void *opaque, hwaddr addr, unsigned len)
{
PIIX3State *d = opaque;
return d->rcr;
}
static const MemoryRegionOps rcr_ops = {
.read = rcr_read,
.write = rcr_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.impl = {
.min_access_size = 1,
.max_access_size = 1,
},
};
static void pci_piix3_realize(PCIDevice *dev, Error **errp)
{
PIIX3State *d = PIIX3_PCI_DEVICE(dev);
ISABus *isa_bus;
isa_bus = isa_bus_new(DEVICE(d), pci_address_space(dev),
pci_address_space_io(dev), errp);
if (!isa_bus) {
return;
}
memory_region_init_io(&d->rcr_mem, OBJECT(dev), &rcr_ops, d,
"piix3-reset-control", 1);
memory_region_add_subregion_overlap(pci_address_space_io(dev),
PIIX_RCR_IOPORT, &d->rcr_mem, 1);
i8257_dma_init(isa_bus, 0);
/* RTC */
qdev_prop_set_int32(DEVICE(&d->rtc), "base_year", 2000);
if (!qdev_realize(DEVICE(&d->rtc), BUS(isa_bus), errp)) {
return;
}
}
static void build_pci_isa_aml(AcpiDevAmlIf *adev, Aml *scope)
{
Aml *field;
Aml *sb_scope = aml_scope("\\_SB");
BusState *bus = qdev_get_child_bus(DEVICE(adev), "isa.0");
/* PIIX PCI to ISA irq remapping */
aml_append(scope, aml_operation_region("P40C", AML_PCI_CONFIG,
aml_int(0x60), 0x04));
/* Fields declarion has to happen *after* operation region */
field = aml_field("PCI0.S08.P40C", AML_BYTE_ACC, AML_NOLOCK, AML_PRESERVE);
aml_append(field, aml_named_field("PRQ0", 8));
aml_append(field, aml_named_field("PRQ1", 8));
aml_append(field, aml_named_field("PRQ2", 8));
aml_append(field, aml_named_field("PRQ3", 8));
aml_append(sb_scope, field);
aml_append(scope, sb_scope);
qbus_build_aml(bus, scope);
}
static void pci_piix3_init(Object *obj)
{
PIIX3State *d = PIIX3_PCI_DEVICE(obj);
object_initialize_child(obj, "rtc", &d->rtc, TYPE_MC146818_RTC);
}
static void pci_piix3_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass);
dc->reset = piix3_reset;
dc->desc = "ISA bridge";
dc->vmsd = &vmstate_piix3;
dc->hotpluggable = false;
k->vendor_id = PCI_VENDOR_ID_INTEL;
/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0;
k->class_id = PCI_CLASS_BRIDGE_ISA;
/*
* Reason: part of PIIX3 southbridge, needs to be wired up by
* pc_piix.c's pc_init1()
*/
dc->user_creatable = false;
adevc->build_dev_aml = build_pci_isa_aml;
}
static const TypeInfo piix3_pci_type_info = {
.name = TYPE_PIIX3_PCI_DEVICE,
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(PIIX3State),
.instance_init = pci_piix3_init,
.abstract = true,
.class_init = pci_piix3_class_init,
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ TYPE_ACPI_DEV_AML_IF },
{ },
},
};
static void piix3_realize(PCIDevice *dev, Error **errp)
{
ERRP_GUARD();
PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
PCIBus *pci_bus = pci_get_bus(dev);
pci_piix3_realize(dev, errp);
if (*errp) {
return;
}
pci_bus_irqs(pci_bus, piix3_set_irq, piix3, PIIX_NUM_PIRQS);
pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
}
static void piix3_class_init(ObjectClass *klass, void *data)
{
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->config_write = piix3_write_config;
k->realize = piix3_realize;
}
static const TypeInfo piix3_info = {
.name = TYPE_PIIX3_DEVICE,
.parent = TYPE_PIIX3_PCI_DEVICE,
.class_init = piix3_class_init,
};
static void piix3_xen_realize(PCIDevice *dev, Error **errp)
{
ERRP_GUARD();
PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
PCIBus *pci_bus = pci_get_bus(dev);
pci_piix3_realize(dev, errp);
if (*errp) {
return;
}
/*
* Xen supports additional interrupt routes from the PCI devices to
* the IOAPIC: the four pins of each PCI device on the bus are also
* connected to the IOAPIC directly.
* These additional routes can be discovered through ACPI.
*/
pci_bus_irqs(pci_bus, xen_piix3_set_irq, piix3, XEN_PIIX_NUM_PIRQS);
}
static void piix3_xen_class_init(ObjectClass *klass, void *data)
{
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
k->config_write = piix3_write_config_xen;
k->realize = piix3_xen_realize;
}
static const TypeInfo piix3_xen_info = {
.name = TYPE_PIIX3_XEN_DEVICE,
.parent = TYPE_PIIX3_PCI_DEVICE,
.class_init = piix3_xen_class_init,
};
static void piix3_register_types(void)
{
type_register_static(&piix3_pci_type_info);
type_register_static(&piix3_info);
type_register_static(&piix3_xen_info);
}
type_init(piix3_register_types)