OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
11d56f6103
qemu-e2k/target/mips/translate_init.inc.c
Fredrik Noring ed4f49ba9b target/mips: Define the R5900 CPU 
The primary purpose of this change is to support programs compiled by
GCC for the R5900 target and thereby run R5900 Linux distributions, for
example Gentoo.

GCC in version 7.3, by itself, by inspection of the GCC source code
and inspection of the generated machine code, for the R5900 target,
only emits two instructions that are specific to the R5900: the three-
operand MULT and MULTU. GCC and libc also emit certain MIPS III
instructions that are not part of the R5900 ISA. They are normally
trapped and emulated by the Linux kernel, and therefore need to be
treated accordingly by QEMU.

A program compiled by GCC is taken to mean source code compiled by GCC
under the restrictions above. One can, with the apparent limitations,
with a bit of effort obtain a fully functioning operating system such
as R5900 Gentoo. Strictly speaking, programs need not be compiled by
GCC to make use of this change.

Instructions and other facilities of the R5900 not implemented by this
change are intended to signal provisional exceptions. One such example
is the FPU that is not compliant with IEEE 754-1985 in system mode. It
is therefore provisionally disabled. In user space the FPU is trapped
and emulated by IEEE 754-1985 compliant software in the kernel, and
this is handled accordingly by QEMU. Another example is the 93
multimedia instructions specific to the R5900 that generate provisional
reserved instruction exception signals.

One of the benefits of running a Linux distribution under QEMU is that
programs can be compiled with a native compiler, where the host and
target are the same, as opposed to a cross-compiler, where they are
not the same. This is especially important in cases where the target
hardware does not have the resources to run a native compiler.

Problems with cross-compilation are often related to host and target
differences in integer sizes, pointer sizes, endianness, machine code,
ABI, etc. Sometimes cross-compilation is not even supported by the
build script for a given package. One effective way to avoid those
problems is to replace the cross-compiler with a native compiler. This
change of compilation methods does not resolve the inherent problems
with cross-compilation.

The native compiler naturally replaces the cross-compiler, because one
typically uses one or the other, and preferably the native compiler
when the circumstances admit this. The native compiler is also a good
test case for the R5900 QEMU user mode. Additionally, Gentoo is well-
known for compiling and installing its packages from sources.

This change has been tested with Gentoo compiled for R5900, including
native compilation of several packages under QEMU.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2018-10-24 15:20:31 +02:00

983 lines
40 KiB
C
Raw Blame History

/*
* MIPS emulation for qemu: CPU initialisation routines.
*
* Copyright (c) 2004-2005 Jocelyn Mayer
* Copyright (c) 2007 Herve Poussineau
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
/* CPU / CPU family specific config register values. */
/* Have config1, uncached coherency */
#define MIPS_CONFIG0 \
((1U << CP0C0_M) | (0x2 << CP0C0_K0))
/* Have config2, no coprocessor2 attached, no MDMX support attached,
no performance counters, watch registers present,
no code compression, EJTAG present, no FPU */
#define MIPS_CONFIG1 \
((1U << CP0C1_M) | \
(0 << CP0C1_C2) | (0 << CP0C1_MD) | (0 << CP0C1_PC) | \
(1 << CP0C1_WR) | (0 << CP0C1_CA) | (1 << CP0C1_EP) | \
(0 << CP0C1_FP))
/* Have config3, no tertiary/secondary caches implemented */
#define MIPS_CONFIG2 \
((1U << CP0C2_M))
/* No config4, no DSP ASE, no large physaddr (PABITS),
no external interrupt controller, no vectored interrupts,
no 1kb pages, no SmartMIPS ASE, no trace logic */
#define MIPS_CONFIG3 \
((0 << CP0C3_M) | (0 << CP0C3_DSPP) | (0 << CP0C3_LPA) | \
(0 << CP0C3_VEIC) | (0 << CP0C3_VInt) | (0 << CP0C3_SP) | \
(0 << CP0C3_SM) | (0 << CP0C3_TL))
#define MIPS_CONFIG4 \
((0 << CP0C4_M))
#define MIPS_CONFIG5 \
((0 << CP0C5_M))
/*****************************************************************************/
/* MIPS CPU definitions */
const mips_def_t mips_defs[] =
{
{
.name = "4Kc",
.CP0_PRid = 0x00018000,
.CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(0 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1278FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "4Km",
.CP0_PRid = 0x00018300,
/* Config1 implemented, fixed mapping MMU,
no virtual icache, uncached coherency. */
.CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_FMT << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1258FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32 | ASE_MIPS16,
.mmu_type = MMU_TYPE_FMT,
},
{
.name = "4KEcR1",
.CP0_PRid = 0x00018400,
.CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(0 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1278FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "4KEmR1",
.CP0_PRid = 0x00018500,
.CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_FMT << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1258FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32 | ASE_MIPS16,
.mmu_type = MMU_TYPE_FMT,
},
{
.name = "4KEc",
.CP0_PRid = 0x00019000,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(0 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1278FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "4KEm",
.CP0_PRid = 0x00019100,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_FMT << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1258FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MIPS16,
.mmu_type = MMU_TYPE_FMT,
},
{
.name = "24Kc",
.CP0_PRid = 0x00019300,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
/* No DSP implemented. */
.CP0_Status_rw_bitmask = 0x1278FF1F,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MIPS16,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "24KEc",
.CP0_PRid = 0x00019600,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_DSPP) | (0 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
/* we have a DSP, but no FPU */
.CP0_Status_rw_bitmask = 0x1378FF1F,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "24Kf",
.CP0_PRid = 0x00019300,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
/* No DSP implemented. */
.CP0_Status_rw_bitmask = 0x3678FF1F,
.CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
(1 << FCR0_D) | (1 << FCR0_S) | (0x93 << FCR0_PRID),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MIPS16,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "34Kf",
.CP0_PRid = 0x00019500,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_VInt) | (1 << CP0C3_MT) |
(1 << CP0C3_DSPP),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3778FF1F,
.CP0_TCStatus_rw_bitmask = (0 << CP0TCSt_TCU3) | (0 << CP0TCSt_TCU2) |
(1 << CP0TCSt_TCU1) | (1 << CP0TCSt_TCU0) |
(0 << CP0TCSt_TMX) | (1 << CP0TCSt_DT) |
(1 << CP0TCSt_DA) | (1 << CP0TCSt_A) |
(0x3 << CP0TCSt_TKSU) | (1 << CP0TCSt_IXMT) |
(0xff << CP0TCSt_TASID),
.CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
(1 << FCR0_D) | (1 << FCR0_S) | (0x95 << FCR0_PRID),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.CP0_SRSCtl = (0xf << CP0SRSCtl_HSS),
.CP0_SRSConf0_rw_bitmask = 0x3fffffff,
.CP0_SRSConf0 = (1U << CP0SRSC0_M) | (0x3fe << CP0SRSC0_SRS3) |
(0x3fe << CP0SRSC0_SRS2) | (0x3fe << CP0SRSC0_SRS1),
.CP0_SRSConf1_rw_bitmask = 0x3fffffff,
.CP0_SRSConf1 = (1U << CP0SRSC1_M) | (0x3fe << CP0SRSC1_SRS6) |
(0x3fe << CP0SRSC1_SRS5) | (0x3fe << CP0SRSC1_SRS4),
.CP0_SRSConf2_rw_bitmask = 0x3fffffff,
.CP0_SRSConf2 = (1U << CP0SRSC2_M) | (0x3fe << CP0SRSC2_SRS9) |
(0x3fe << CP0SRSC2_SRS8) | (0x3fe << CP0SRSC2_SRS7),
.CP0_SRSConf3_rw_bitmask = 0x3fffffff,
.CP0_SRSConf3 = (1U << CP0SRSC3_M) | (0x3fe << CP0SRSC3_SRS12) |
(0x3fe << CP0SRSC3_SRS11) | (0x3fe << CP0SRSC3_SRS10),
.CP0_SRSConf4_rw_bitmask = 0x3fffffff,
.CP0_SRSConf4 = (0x3fe << CP0SRSC4_SRS15) |
(0x3fe << CP0SRSC4_SRS14) | (0x3fe << CP0SRSC4_SRS13),
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_MT,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "74Kf",
.CP0_PRid = 0x00019700,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_CA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_DSP2P) | (1 << CP0C3_DSPP) |
(1 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3778FF1F,
.CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
(1 << FCR0_D) | (1 << FCR0_S) | (0x93 << FCR0_PRID),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_DSP_R2,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "M14K",
.CP0_PRid = 0x00019b00,
/* Config1 implemented, fixed mapping MMU,
no virtual icache, uncached coherency. */
.CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_KU) | (0x2 << CP0C0_K23) |
(0x1 << CP0C0_AR) | (MMU_TYPE_FMT << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1,
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (0x2 << CP0C3_ISA) | (1 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1258FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MICROMIPS,
.mmu_type = MMU_TYPE_FMT,
},
{
.name = "M14Kc",
/* This is the TLB-based MMU core. */
.CP0_PRid = 0x00019c00,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
(0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
(0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (0x2 << CP0C3_ISA) | (0 << CP0C3_VInt),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x1278FF17,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R2 | ASE_MICROMIPS,
.mmu_type = MMU_TYPE_R4000,
},
{
/* FIXME:
* Config3: CMGCR, PW, VZ, CTXTC, CDMM, TL
* Config4: MMUExtDef
* Config5: MRP
* FIR(FCR0): Has2008
* */
.name = "P5600",
.CP0_PRid = 0x0001A800,
.CP0_Config0 = MIPS_CONFIG0 | (1 << CP0C0_MM) | (1 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (0x3F << CP0C1_MMU) |
(2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
(2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_FP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_MSAP) |
(1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_SC) |
(1 << CP0C3_ULRI) | (1 << CP0C3_RXI) | (1 << CP0C3_LPA) |
(1 << CP0C3_VInt),
.CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (2 << CP0C4_IE) |
(0x1c << CP0C4_KScrExist),
.CP0_Config4_rw_bitmask = 0,
.CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_EVA) | (1 << CP0C5_MVH) |
(1 << CP0C5_LLB) | (1 << CP0C5_MRP),
.CP0_Config5_rw_bitmask = (1 << CP0C5_K) | (1 << CP0C5_CV) |
(1 << CP0C5_MSAEn) | (1 << CP0C5_UFE) |
(1 << CP0C5_FRE) | (1 << CP0C5_UFR),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3C68FF1F,
.CP0_PageGrain_rw_bitmask = (1U << CP0PG_RIE) | (1 << CP0PG_XIE) |
(1 << CP0PG_ELPA) | (1 << CP0PG_IEC),
.CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
.CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_UFRP) | (1 << FCR0_HAS2008) |
(1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
(1 << FCR0_D) | (1 << FCR0_S) | (0x03 << FCR0_PRID),
.CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 32,
.PABITS = 40,
.insn_flags = CPU_MIPS32R5 | ASE_MSA,
.mmu_type = MMU_TYPE_R4000,
},
{
/*
* The Toshiba TX System RISC TX79 Core Architecture manual
*
* https://wiki.qemu.org/File:C790.pdf
*
* describes the C790 processor that is a follow-up to the R5900.
* There are a few notable differences in that the R5900 FPU
*
* - is not IEEE 754-1985 compliant,
* - does not implement double format, and
* - its machine code is nonstandard.
*/
.name = "R5900",
.CP0_PRid = 0x00002E00,
/* No L2 cache, icache size 32k, dcache size 32k, uncached coherency. */
.CP0_Config0 = (0x3 << 9) | (0x3 << 6) | (0x2 << CP0C0_K0),
.CP0_Status_rw_bitmask = 0xF4C79C1F,
#ifdef CONFIG_USER_ONLY
/*
* R5900 hardware traps to the Linux kernel for IEEE 754-1985 and LL/SC
* emulation. For user only, QEMU is the kernel, so we emulate the traps
* by simply emulating the instructions directly.
*
* Note: Config1 is only used internally, the R5900 has only Config0.
*/
.CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
.CP0_LLAddr_rw_bitmask = 0xFFFFFFFF,
.CP0_LLAddr_shift = 4,
.CP1_fcr0 = (0x38 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0x0183FFFF,
#else
/*
* The R5900 COP1 FPU implements single-precision floating-point
* operations but is not entirely IEEE 754-1985 compatible. In
* particular,
*
* - NaN (not a number) and +/- infinities are not supported;
* - exception mechanisms are not fully supported;
* - denormalized numbers are not supported;
* - rounding towards nearest and +/- infinities are not supported;
* - computed results usually differs in the least significant bit;
* - saturations can differ more than the least significant bit.
*
* Since only rounding towards zero is supported, the two least
* significant bits of FCR31 are hardwired to 01.
*
* FPU emulation is disabled here until it is implemented.
*
* Note: Config1 is only used internally, the R5900 has only Config0.
*/
.CP0_Config1 = (47 << CP0C1_MMU),
#endif /* !CONFIG_USER_ONLY */
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_R5900 | ASE_MMI,
.mmu_type = MMU_TYPE_R4000,
},
{
/* A generic CPU supporting MIPS32 Release 6 ISA.
FIXME: Support IEEE 754-2008 FP.
Eventually this should be replaced by a real CPU model. */
.name = "mips32r6-generic",
.CP0_PRid = 0x00010000,
.CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (31 << CP0C1_MMU) |
(2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
(2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
(0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_BP) | (1 << CP0C3_BI) |
(2 << CP0C3_ISA) | (1 << CP0C3_ULRI) |
(1 << CP0C3_RXI) | (1U << CP0C3_M),
.CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
(3 << CP0C4_IE) | (1U << CP0C4_M),
.CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_XNP) | (1 << CP0C5_LLB),
.CP0_Config5_rw_bitmask = (1 << CP0C5_SBRI) | (1 << CP0C5_FRE) |
(1 << CP0C5_UFE),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3058FF1F,
.CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
(1U << CP0PG_RIE),
.CP0_PageGrain_rw_bitmask = 0,
.CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
(1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
(1 << FCR0_S) | (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
.CP1_fcr31_rw_bitmask = 0x0103FFFF,
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_MIPS32R6 | ASE_MICROMIPS,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "I7200",
.CP0_PRid = 0x00010000,
.CP0_Config0 = MIPS_CONFIG0 | (1 << CP0C0_MM) | (0x2 << CP0C0_AR) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = (1U << CP0C1_M) | (15 << CP0C1_MMU) | (2 << CP0C1_IS) |
(4 << CP0C1_IL) | (3 << CP0C1_IA) | (2 << CP0C1_DS) |
(4 << CP0C1_DL) | (3 << CP0C1_DA) | (1 << CP0C1_PC) |
(1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_CMGCR) |
(1 << CP0C3_BI) | (1 << CP0C3_SC) | (3 << CP0C3_MMAR) |
(1 << CP0C3_ISA_ON_EXC) | (1 << CP0C3_ISA) |
(1 << CP0C3_ULRI) | (1 << CP0C3_RXI) |
(1 << CP0C3_DSP2P) | (1 << CP0C3_DSPP) |
(1 << CP0C3_CTXTC) | (1 << CP0C3_VInt) |
(1 << CP0C3_CDMM) | (1 << CP0C3_MT) | (1 << CP0C3_TL),
.CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
(2 << CP0C4_IE) | (1U << CP0C4_M),
.CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_MVH) | (1 << CP0C5_LLB),
.CP0_Config5_rw_bitmask = (1 << CP0C5_SBRI) | (1 << CP0C5_FRE) |
(1 << CP0C5_UFE),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3158FF1F,
.CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
(1U << CP0PG_RIE),
.CP0_PageGrain_rw_bitmask = 0,
.CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
(1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
(1 << FCR0_S) | (0x02 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
.SEGBITS = 32,
.PABITS = 32,
.insn_flags = CPU_NANOMIPS32 | ASE_DSP | ASE_DSP_R2 | ASE_DSP_R3 |
ASE_MT,
.mmu_type = MMU_TYPE_R4000,
},
#if defined(TARGET_MIPS64)
{
.name = "R4000",
.CP0_PRid = 0x00000400,
/* No L2 cache, icache size 8k, dcache size 8k, uncached coherency. */
.CP0_Config0 = (1 << 17) | (0x1 << 9) | (0x1 << 6) | (0x2 << CP0C0_K0),
/* Note: Config1 is only used internally, the R4000 has only Config0. */
.CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
.CP0_LLAddr_rw_bitmask = 0xFFFFFFFF,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 16,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3678FFFF,
/* The R4000 has a full 64bit FPU but doesn't use the fcr0 bits. */
.CP1_fcr0 = (0x5 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0x0183FFFF,
.SEGBITS = 40,
.PABITS = 36,
.insn_flags = CPU_MIPS3,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "VR5432",
.CP0_PRid = 0x00005400,
/* No L2 cache, icache size 8k, dcache size 8k, uncached coherency. */
.CP0_Config0 = (1 << 17) | (0x1 << 9) | (0x1 << 6) | (0x2 << CP0C0_K0),
.CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
.CP0_LLAddr_rw_bitmask = 0xFFFFFFFFL,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 16,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x3678FFFF,
/* The VR5432 has a full 64bit FPU but doesn't use the fcr0 bits. */
.CP1_fcr0 = (0x54 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 40,
.PABITS = 32,
.insn_flags = CPU_VR54XX,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "5Kc",
.CP0_PRid = 0x00018100,
.CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (31 << CP0C1_MMU) |
(1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
(1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x12F8FFFF,
.SEGBITS = 42,
.PABITS = 36,
.insn_flags = CPU_MIPS64,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "5Kf",
.CP0_PRid = 0x00018100,
.CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (31 << CP0C1_MMU) |
(1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
(1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x36F8FFFF,
/* The 5Kf has F64 / L / W but doesn't use the fcr0 bits. */
.CP1_fcr0 = (1 << FCR0_D) | (1 << FCR0_S) |
(0x81 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 42,
.PABITS = 36,
.insn_flags = CPU_MIPS64,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "20Kc",
/* We emulate a later version of the 20Kc, earlier ones had a broken
WAIT instruction. */
.CP0_PRid = 0x000182a0,
.CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT) | (1 << CP0C0_VI),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (47 << CP0C1_MMU) |
(2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
(2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 1,
.CP0_Status_rw_bitmask = 0x36FBFFFF,
/* The 20Kc has F64 / L / W but doesn't use the fcr0 bits. */
.CP1_fcr0 = (1 << FCR0_3D) | (1 << FCR0_PS) |
(1 << FCR0_D) | (1 << FCR0_S) |
(0x82 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 40,
.PABITS = 36,
.insn_flags = CPU_MIPS64 | ASE_MIPS3D,
.mmu_type = MMU_TYPE_R4000,
},
{
/* A generic CPU providing MIPS64 Release 2 features.
FIXME: Eventually this should be replaced by a real CPU model. */
.name = "MIPS64R2-generic",
.CP0_PRid = 0x00010000,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
(2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
(2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_LPA),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x36FBFFFF,
.CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
.CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_3D) | (1 << FCR0_PS) |
(1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
(1 << FCR0_S) | (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 42,
.PABITS = 36,
.insn_flags = CPU_MIPS64R2 | ASE_MIPS3D,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "5KEc",
.CP0_PRid = 0x00018900,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (31 << CP0C1_MMU) |
(1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
(1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x12F8FFFF,
.SEGBITS = 42,
.PABITS = 36,
.insn_flags = CPU_MIPS64R2,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "5KEf",
.CP0_PRid = 0x00018900,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (31 << CP0C1_MMU) |
(1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
(1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3,
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 4,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x36F8FFFF,
.CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
(1 << FCR0_D) | (1 << FCR0_S) |
(0x89 << FCR0_PRID) | (0x0 << FCR0_REV),
.SEGBITS = 42,
.PABITS = 36,
.insn_flags = CPU_MIPS64R2,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "I6400",
.CP0_PRid = 0x1A900,
.CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AR) | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
(2 << CP0C1_IS) | (5 << CP0C1_IL) | (3 << CP0C1_IA) |
(2 << CP0C1_DS) | (5 << CP0C1_DL) | (3 << CP0C1_DA) |
(0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) |
(1 << CP0C3_CMGCR) | (1 << CP0C3_MSAP) |
(1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_ULRI) |
(1 << CP0C3_RXI) | (1 << CP0C3_LPA) | (1 << CP0C3_VInt),
.CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (3 << CP0C4_IE) |
(1 << CP0C4_AE) | (0xfc << CP0C4_KScrExist),
.CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_XNP) | (1 << CP0C5_VP) |
(1 << CP0C5_LLB) | (1 << CP0C5_MRP),
.CP0_Config5_rw_bitmask = (1 << CP0C5_MSAEn) | (1 << CP0C5_SBRI) |
(1 << CP0C5_FRE) | (1 << CP0C5_UFE),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x30D8FFFF,
.CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
(1U << CP0PG_RIE),
.CP0_PageGrain_rw_bitmask = (1 << CP0PG_ELPA),
.CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
.CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
(1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
(1 << FCR0_S) | (0x03 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
.CP1_fcr31_rw_bitmask = 0x0103FFFF,
.MSAIR = 0x03 << MSAIR_ProcID,
.SEGBITS = 48,
.PABITS = 48,
.insn_flags = CPU_MIPS64R6 | ASE_MSA,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "Loongson-2E",
.CP0_PRid = 0x6302,
/* 64KB I-cache and d-cache. 4 way with 32 bit cache line size. */
.CP0_Config0 = (0x1<<17) | (0x1<<16) | (0x1<<11) | (0x1<<8) |
(0x1<<5) | (0x1<<4) | (0x1<<1),
/* Note: Config1 is only used internally,
Loongson-2E has only Config0. */
.CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
.SYNCI_Step = 16,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x35D0FFFF,
.CP1_fcr0 = (0x5 << FCR0_PRID) | (0x1 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 40,
.PABITS = 40,
.insn_flags = CPU_LOONGSON2E,
.mmu_type = MMU_TYPE_R4000,
},
{
.name = "Loongson-2F",
.CP0_PRid = 0x6303,
/* 64KB I-cache and d-cache. 4 way with 32 bit cache line size. */
.CP0_Config0 = (0x1<<17) | (0x1<<16) | (0x1<<11) | (0x1<<8) |
(0x1<<5) | (0x1<<4) | (0x1<<1),
/* Note: Config1 is only used internally,
Loongson-2F has only Config0. */
.CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
.SYNCI_Step = 16,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0xF5D0FF1F, /* Bits 7:5 not writable. */
.CP1_fcr0 = (0x5 << FCR0_PRID) | (0x1 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 40,
.PABITS = 40,
.insn_flags = CPU_LOONGSON2F,
.mmu_type = MMU_TYPE_R4000,
},
{
/* A generic CPU providing MIPS64 DSP R2 ASE features.
FIXME: Eventually this should be replaced by a real CPU model. */
.name = "mips64dspr2",
.CP0_PRid = 0x00010000,
.CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
(MMU_TYPE_R4000 << CP0C0_MT),
.CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
(2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
(2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
(1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
.CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_DSP2P) |
(1 << CP0C3_DSPP) | (1 << CP0C3_LPA),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
.CCRes = 2,
.CP0_Status_rw_bitmask = 0x37FBFFFF,
.CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_3D) | (1 << FCR0_PS) |
(1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
(1 << FCR0_S) | (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
.CP1_fcr31 = 0,
.CP1_fcr31_rw_bitmask = 0xFF83FFFF,
.SEGBITS = 42,
.PABITS = 36,
.insn_flags = CPU_MIPS64R2 | ASE_DSP | ASE_DSP_R2,
.mmu_type = MMU_TYPE_R4000,
},
#endif
};
const int mips_defs_number = ARRAY_SIZE(mips_defs);
void mips_cpu_list (FILE *f, fprintf_function cpu_fprintf)
{
int i;
for (i = 0; i < ARRAY_SIZE(mips_defs); i++) {
(*cpu_fprintf)(f, "MIPS '%s'\n",
mips_defs[i].name);
}
}
#ifndef CONFIG_USER_ONLY
static void no_mmu_init (CPUMIPSState *env, const mips_def_t *def)
{
env->tlb->nb_tlb = 1;
env->tlb->map_address = &no_mmu_map_address;
}
static void fixed_mmu_init (CPUMIPSState *env, const mips_def_t *def)
{
env->tlb->nb_tlb = 1;
env->tlb->map_address = &fixed_mmu_map_address;
}
static void r4k_mmu_init (CPUMIPSState *env, const mips_def_t *def)
{
env->tlb->nb_tlb = 1 + ((def->CP0_Config1 >> CP0C1_MMU) & 63);
env->tlb->map_address = &r4k_map_address;
env->tlb->helper_tlbwi = r4k_helper_tlbwi;
env->tlb->helper_tlbwr = r4k_helper_tlbwr;
env->tlb->helper_tlbp = r4k_helper_tlbp;
env->tlb->helper_tlbr = r4k_helper_tlbr;
env->tlb->helper_tlbinv = r4k_helper_tlbinv;
env->tlb->helper_tlbinvf = r4k_helper_tlbinvf;
}
static void mmu_init (CPUMIPSState *env, const mips_def_t *def)
{
MIPSCPU *cpu = mips_env_get_cpu(env);
env->tlb = g_malloc0(sizeof(CPUMIPSTLBContext));
switch (def->mmu_type) {
case MMU_TYPE_NONE:
no_mmu_init(env, def);
break;
case MMU_TYPE_R4000:
r4k_mmu_init(env, def);
break;
case MMU_TYPE_FMT:
fixed_mmu_init(env, def);
break;
case MMU_TYPE_R3000:
case MMU_TYPE_R6000:
case MMU_TYPE_R8000:
default:
cpu_abort(CPU(cpu), "MMU type not supported\n");
}
}
#endif /* CONFIG_USER_ONLY */
static void fpu_init (CPUMIPSState *env, const mips_def_t *def)
{
int i;
for (i = 0; i < MIPS_FPU_MAX; i++)
env->fpus[i].fcr0 = def->CP1_fcr0;
memcpy(&env->active_fpu, &env->fpus[0], sizeof(env->active_fpu));
}
static void mvp_init (CPUMIPSState *env, const mips_def_t *def)
{
env->mvp = g_malloc0(sizeof(CPUMIPSMVPContext));
/* MVPConf1 implemented, TLB sharable, no gating storage support,
programmable cache partitioning implemented, number of allocatable
and sharable TLB entries, MVP has allocatable TCs, 2 VPEs
implemented, 5 TCs implemented. */
env->mvp->CP0_MVPConf0 = (1U << CP0MVPC0_M) | (1 << CP0MVPC0_TLBS) |
(0 << CP0MVPC0_GS) | (1 << CP0MVPC0_PCP) |
// TODO: actually do 2 VPEs.
// (1 << CP0MVPC0_TCA) | (0x1 << CP0MVPC0_PVPE) |
// (0x04 << CP0MVPC0_PTC);
(1 << CP0MVPC0_TCA) | (0x0 << CP0MVPC0_PVPE) |
(0x00 << CP0MVPC0_PTC);
#if !defined(CONFIG_USER_ONLY)
/* Usermode has no TLB support */
env->mvp->CP0_MVPConf0 |= (env->tlb->nb_tlb << CP0MVPC0_PTLBE);
#endif
/* Allocatable CP1 have media extensions, allocatable CP1 have FP support,
no UDI implemented, no CP2 implemented, 1 CP1 implemented. */
env->mvp->CP0_MVPConf1 = (1U << CP0MVPC1_CIM) | (1 << CP0MVPC1_CIF) |
(0x0 << CP0MVPC1_PCX) | (0x0 << CP0MVPC1_PCP2) |
(0x1 << CP0MVPC1_PCP1);
}
static void msa_reset(CPUMIPSState *env)
{
#ifdef CONFIG_USER_ONLY
/* MSA access enabled */
env->CP0_Config5 |= 1 << CP0C5_MSAEn;
env->CP0_Status |= (1 << CP0St_CU1) | (1 << CP0St_FR);
#endif
/* MSA CSR:
- non-signaling floating point exception mode off (NX bit is 0)
- Cause, Enables, and Flags are all 0
- round to nearest / ties to even (RM bits are 0) */
env->active_tc.msacsr = 0;
restore_msa_fp_status(env);
/* tininess detected after rounding.*/
set_float_detect_tininess(float_tininess_after_rounding,
&env->active_tc.msa_fp_status);
/* clear float_status exception flags */
set_float_exception_flags(0, &env->active_tc.msa_fp_status);
/* clear float_status nan mode */
set_default_nan_mode(0, &env->active_tc.msa_fp_status);
/* set proper signanling bit meaning ("1" means "quiet") */
set_snan_bit_is_one(0, &env->active_tc.msa_fp_status);
}
Reference in New Issue View Git Blame Copy Permalink