..
allwinner-a10.c
hw/arm/allwinner: add RTC device support
2020-03-12 16:27:33 +00:00
allwinner-h3.c
hw/arm/allwinner: add RTC device support
2020-03-12 16:27:33 +00:00
armsse.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
armv7m.c
hw/core/loader: Let load_elf() populate a field with CPU-specific flags
2020-01-29 19:28:52 +01:00
aspeed_ast2600.c
hw/arm: ast2600: Wire up EHCI controllers
2020-02-13 14:14:55 +00:00
aspeed_soc.c
hw/arm: ast2400/ast2500: Wire up EHCI controllers
2020-02-13 14:14:55 +00:00
aspeed.c
arm/aspeed: use memdev for RAM
2020-02-19 16:49:54 +00:00
bcm2835_peripherals.c
hw/arm/bcm2835_peripherals: Use the SYS_timer
2019-10-25 13:09:27 +01:00
bcm2836.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
boot.c
Remove unnecessary cast when using the address_space API
2020-02-20 14:47:08 +01:00
collie.c
arm/collie: use memdev for RAM
2020-02-19 16:49:54 +00:00
cubieboard.c
hw/arm/allwinner: add SD/MMC host controller
2020-03-12 16:27:33 +00:00
digic_boards.c
arm/digic_boards: use memdev for RAM
2020-02-19 16:49:54 +00:00
digic.c
exynos4_boards.c
Machine + x86 queue, 2019-09-03
2019-09-04 14:44:54 +01:00
exynos4210.c
hw/arm/exynos4210: Connect serial port DMA busy signals with pl330
2020-01-23 16:34:15 +00:00
fsl-imx6.c
i.MX: Add support for WDT on i.MX6
2020-02-13 14:14:52 +00:00
fsl-imx6ul.c
hw/arm/fsl-imx6ul: Wire up USB controllers
2020-03-17 11:23:14 +00:00
fsl-imx7.c
fsl-imx25.c
hw/arm/fsl-imx25: Wire up USB controllers
2020-03-12 16:27:33 +00:00
fsl-imx31.c
gumstix.c
hw/arm/gumstix: Simplify since the machines are little-endian only
2020-03-05 16:09:14 +00:00
highbank.c
arm/highbank: use memdev for RAM
2020-02-19 16:49:54 +00:00
imx25_pdk.c
hw/arm/fsl-imx25: Wire up eSDHC controllers
2020-03-12 16:27:33 +00:00
integratorcp.c
hw/arm/integratorcp: Map the audio codec controller
2020-02-28 16:14:57 +00:00
Kconfig
hw/usb: Add basic i.MX USB Phy support
2020-03-17 11:23:14 +00:00
kzm.c
arm/kzm: use memdev for RAM
2020-02-19 16:49:55 +00:00
mainstone.c
hw/arm/mainstone: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
Makefile.objs
hw/arm: add Xunlong Orange Pi PC machine
2020-03-12 16:27:33 +00:00
mcimx6ul-evk.c
arm/mcimx6ul-evk: use memdev for RAM
2020-02-19 16:49:55 +00:00
mcimx7d-sabre.c
arm/mcimx7d-sabre: use memdev for RAM
2020-02-19 16:49:55 +00:00
microbit.c
mps2-tz.c
arm/mps2-tz: use memdev for RAM
2020-02-19 16:49:55 +00:00
mps2.c
arm/mps2: use memdev for RAM
2020-02-19 16:49:55 +00:00
msf2-soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
msf2-som.c
musca.c
hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory
2019-10-24 20:10:27 +02:00
musicpal.c
hw/arm/musicpal: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
netduino2.c
netduinoplus2.c
hw/arm: Add the Netduino Plus 2
2020-01-17 14:09:29 +00:00
nrf51_soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
nseries.c
arm/nseries: use memdev for RAM
2020-02-19 16:49:56 +00:00
omap1.c
omap-gpio: remove PROP_PTR
2020-01-07 17:24:29 +04:00
omap2.c
omap-gpio: remove PROP_PTR
2020-01-07 17:24:29 +04:00
omap_sx1.c
hw/arm/omap_sx1: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
orangepi.c
hw/arm/allwinner-h3: add SDRAM controller device
2020-03-12 16:27:33 +00:00
palm.c
arm/palm: use memdev for RAM
2020-02-19 16:49:56 +00:00
pxa2xx_gpio.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
pxa2xx_pic.c
pxa2xx.c
hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaks
2020-03-05 16:09:15 +00:00
raspi.c
arm/raspi: use memdev for RAM
2020-02-19 16:49:56 +00:00
realview.c
sabrelite.c
arm/sabrelite: use memdev for RAM
2020-02-19 16:49:56 +00:00
sbsa-ref.c
hw/arm: Use TYPE_PL011 to create serial port
2020-02-28 16:14:57 +00:00
smmu-common.c
hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logic
2020-03-05 16:09:14 +00:00
smmu-internal.h
smmuv3-internal.h
hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro
2019-12-20 14:03:00 +00:00
smmuv3.c
hw: Remove unnecessary cast when calling dma_memory_read()
2020-02-20 14:47:08 +01:00
spitz.c
hw/arm/spitz: move timer_new from init() into realize() to avoid memleaks
2020-03-05 16:09:16 +00:00
stellaris.c
stellaris: delay timer_new to avoid memleaks
2020-02-07 14:04:28 +00:00
stm32f205_soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
stm32f405_soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
strongarm.c
hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaks
2020-03-05 16:09:16 +00:00
strongarm.h
hw/arm/collie: Create the RAM in the board
2019-10-22 17:44:01 +01:00
sysbus-fdt.c
hw/arm/virt: vTPM support
2020-03-05 12:18:16 -05:00
tosa.c
trace-events
versatilepb.c
arm/versatilepb: use memdev for RAM
2020-02-19 16:49:56 +00:00
vexpress.c
arm/vexpress: use memdev for RAM
2020-02-19 16:49:56 +00:00
virt-acpi-build.c
arm/acpi: simplify the description of PCI _CRS
2020-02-13 14:14:53 +00:00
virt.c
hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work
2020-03-12 16:27:33 +00:00
xilinx_zynq.c
hw/arm/xilinx_zynq: Fix USB port instantiation
2020-02-28 16:14:57 +00:00
xlnx-versal-virt.c
hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodes
2020-03-05 16:09:14 +00:00
xlnx-versal.c
hw/arm: versal: Add support for the LPD ADMAs
2020-03-05 16:09:13 +00:00
xlnx-zcu102.c
arm/xlnx-zcu102: use memdev for RAM
2020-02-19 16:49:57 +00:00
xlnx-zynqmp.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
z2.c
hw/arm/z2: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
17372bd812