8983e3e350
During guest OS reboot, guest framebuffer is invalid. It will cause bugs, if the invalid guest framebuffer is still used by host. This patch is to introduce vfio_display_reset which is invoked during vfio display reset. This vfio_display_reset function is used to release the invalid display resource, disable scanout mode and replace the invalid surface with QemuConsole's DisplaySurafce. This patch can fix the GPU hang issue caused by gd_egl_draw during guest OS reboot. Changes v3->v4: - Move dma-buf based display check into the vfio_display_reset(). (Gerd) Changes v2->v3: - Limit vfio_display_reset to dma-buf based vfio display. (Gerd) Changes v1->v2: - Use dpy_gfx_update_full() update screen after reset. (Gerd) - Remove dpy_gfx_switch_surface(). (Gerd) Signed-off-by: Tina Zhang <tina.zhang@intel.com> Message-id: 1524820266-27079-3-git-send-email-tina.zhang@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
184 lines
5.6 KiB
C
184 lines
5.6 KiB
C
/*
|
|
* vfio based device assignment support - PCI devices
|
|
*
|
|
* Copyright Red Hat, Inc. 2012-2015
|
|
*
|
|
* Authors:
|
|
* Alex Williamson <alex.williamson@redhat.com>
|
|
*
|
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
|
* the COPYING file in the top-level directory.
|
|
*/
|
|
#ifndef HW_VFIO_VFIO_PCI_H
|
|
#define HW_VFIO_VFIO_PCI_H
|
|
|
|
#include "qemu-common.h"
|
|
#include "exec/memory.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/vfio/vfio-common.h"
|
|
#include "qemu/event_notifier.h"
|
|
#include "qemu/queue.h"
|
|
#include "qemu/timer.h"
|
|
|
|
#define PCI_ANY_ID (~0)
|
|
|
|
struct VFIOPCIDevice;
|
|
|
|
typedef struct VFIOQuirk {
|
|
QLIST_ENTRY(VFIOQuirk) next;
|
|
void *data;
|
|
int nr_mem;
|
|
MemoryRegion *mem;
|
|
} VFIOQuirk;
|
|
|
|
typedef struct VFIOBAR {
|
|
VFIORegion region;
|
|
MemoryRegion *mr;
|
|
size_t size;
|
|
uint8_t type;
|
|
bool ioport;
|
|
bool mem64;
|
|
QLIST_HEAD(, VFIOQuirk) quirks;
|
|
} VFIOBAR;
|
|
|
|
typedef struct VFIOVGARegion {
|
|
MemoryRegion mem;
|
|
off_t offset;
|
|
int nr;
|
|
QLIST_HEAD(, VFIOQuirk) quirks;
|
|
} VFIOVGARegion;
|
|
|
|
typedef struct VFIOVGA {
|
|
off_t fd_offset;
|
|
int fd;
|
|
VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
|
|
} VFIOVGA;
|
|
|
|
typedef struct VFIOINTx {
|
|
bool pending; /* interrupt pending */
|
|
bool kvm_accel; /* set when QEMU bypass through KVM enabled */
|
|
uint8_t pin; /* which pin to pull for qemu_set_irq */
|
|
EventNotifier interrupt; /* eventfd triggered on interrupt */
|
|
EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
|
|
PCIINTxRoute route; /* routing info for QEMU bypass */
|
|
uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
|
|
QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
|
|
} VFIOINTx;
|
|
|
|
typedef struct VFIOMSIVector {
|
|
/*
|
|
* Two interrupt paths are configured per vector. The first, is only used
|
|
* for interrupts injected via QEMU. This is typically the non-accel path,
|
|
* but may also be used when we want QEMU to handle masking and pending
|
|
* bits. The KVM path bypasses QEMU and is therefore higher performance,
|
|
* but requires masking at the device. virq is used to track the MSI route
|
|
* through KVM, thus kvm_interrupt is only available when virq is set to a
|
|
* valid (>= 0) value.
|
|
*/
|
|
EventNotifier interrupt;
|
|
EventNotifier kvm_interrupt;
|
|
struct VFIOPCIDevice *vdev; /* back pointer to device */
|
|
int virq;
|
|
bool use;
|
|
} VFIOMSIVector;
|
|
|
|
enum {
|
|
VFIO_INT_NONE = 0,
|
|
VFIO_INT_INTx = 1,
|
|
VFIO_INT_MSI = 2,
|
|
VFIO_INT_MSIX = 3,
|
|
};
|
|
|
|
/* Cache of MSI-X setup */
|
|
typedef struct VFIOMSIXInfo {
|
|
uint8_t table_bar;
|
|
uint8_t pba_bar;
|
|
uint16_t entries;
|
|
uint32_t table_offset;
|
|
uint32_t pba_offset;
|
|
unsigned long *pending;
|
|
} VFIOMSIXInfo;
|
|
|
|
typedef struct VFIOPCIDevice {
|
|
PCIDevice pdev;
|
|
VFIODevice vbasedev;
|
|
VFIOINTx intx;
|
|
unsigned int config_size;
|
|
uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
|
|
off_t config_offset; /* Offset of config space region within device fd */
|
|
unsigned int rom_size;
|
|
off_t rom_offset; /* Offset of ROM region within device fd */
|
|
void *rom;
|
|
int msi_cap_size;
|
|
VFIOMSIVector *msi_vectors;
|
|
VFIOMSIXInfo *msix;
|
|
int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
|
|
int interrupt; /* Current interrupt type */
|
|
VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
|
|
VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */
|
|
void *igd_opregion;
|
|
PCIHostDeviceAddress host;
|
|
EventNotifier err_notifier;
|
|
EventNotifier req_notifier;
|
|
int (*resetfn)(struct VFIOPCIDevice *);
|
|
uint32_t vendor_id;
|
|
uint32_t device_id;
|
|
uint32_t sub_vendor_id;
|
|
uint32_t sub_device_id;
|
|
uint32_t features;
|
|
#define VFIO_FEATURE_ENABLE_VGA_BIT 0
|
|
#define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
|
|
#define VFIO_FEATURE_ENABLE_REQ_BIT 1
|
|
#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
|
|
#define VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT 2
|
|
#define VFIO_FEATURE_ENABLE_IGD_OPREGION \
|
|
(1 << VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT)
|
|
OnOffAuto display;
|
|
int32_t bootindex;
|
|
uint32_t igd_gms;
|
|
OffAutoPCIBAR msix_relo;
|
|
uint8_t pm_cap;
|
|
uint8_t nv_gpudirect_clique;
|
|
bool pci_aer;
|
|
bool req_enabled;
|
|
bool has_flr;
|
|
bool has_pm_reset;
|
|
bool rom_read_failed;
|
|
bool no_kvm_intx;
|
|
bool no_kvm_msi;
|
|
bool no_kvm_msix;
|
|
bool no_geforce_quirks;
|
|
VFIODisplay *dpy;
|
|
} VFIOPCIDevice;
|
|
|
|
uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
|
|
void vfio_pci_write_config(PCIDevice *pdev,
|
|
uint32_t addr, uint32_t val, int len);
|
|
|
|
uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size);
|
|
void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size);
|
|
|
|
bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev);
|
|
void vfio_vga_quirk_setup(VFIOPCIDevice *vdev);
|
|
void vfio_vga_quirk_exit(VFIOPCIDevice *vdev);
|
|
void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev);
|
|
void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr);
|
|
void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr);
|
|
void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr);
|
|
void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev);
|
|
int vfio_add_virt_caps(VFIOPCIDevice *vdev, Error **errp);
|
|
|
|
extern const PropertyInfo qdev_prop_nv_gpudirect_clique;
|
|
|
|
int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp);
|
|
|
|
int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
|
|
struct vfio_region_info *info,
|
|
Error **errp);
|
|
|
|
void vfio_display_reset(VFIOPCIDevice *vdev);
|
|
int vfio_display_probe(VFIOPCIDevice *vdev, Error **errp);
|
|
void vfio_display_finalize(VFIOPCIDevice *vdev);
|
|
|
|
#endif /* HW_VFIO_VFIO_PCI_H */
|