qemu-e2k/configure
Miroslav Rezanina ced5cfffee Use long endian options for ppc64
GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are
equivalent on ppc64 architecture. However, Clang supports only long
version of the options.

Use longer form in configure to properly support both GCC and Clang
compiler. In addition, fix this issue in tcg test configure.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220131091714.4825-1-mrezanin@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05 07:16:46 +01:00

3285 lines
90 KiB
Bash
Executable File

#!/bin/sh
#
# qemu configure script (c) 2003 Fabrice Bellard
#
# Unset some variables known to interfere with behavior of common tools,
# just as autoconf does.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
# Don't allow CCACHE, if present, to use cached results of compile tests!
export CCACHE_RECACHE=yes
# make source path absolute
source_path=$(cd "$(dirname -- "$0")"; pwd)
if test "$PWD" = "$source_path"
then
echo "Using './build' as the directory for build output"
MARKER=build/auto-created-by-configure
if test -e build
then
if test -f $MARKER
then
rm -rf build
else
echo "ERROR: ./build dir already exists and was not previously created by configure"
exit 1
fi
fi
mkdir build
touch $MARKER
cat > GNUmakefile <<'EOF'
# This file is auto-generated by configure to support in-source tree
# 'make' command invocation
ifeq ($(MAKECMDGOALS),)
recurse: all
endif
.NOTPARALLEL: %
%: force
@echo 'changing dir to build for $(MAKE) "$(MAKECMDGOALS)"...'
@$(MAKE) -C build -f Makefile $(MAKECMDGOALS)
@if test "$(MAKECMDGOALS)" = "distclean" && \
test -e build/auto-created-by-configure ; \
then \
rm -rf build GNUmakefile ; \
fi
force: ;
.PHONY: force
GNUmakefile: ;
EOF
cd build
exec $source_path/configure "$@"
fi
# Temporary directory used for files created while
# configure runs. Since it is in the build directory
# we can safely blow away any previous version of it
# (and we need not jump through hoops to try to delete
# it when configure exits.)
TMPDIR1="config-temp"
rm -rf "${TMPDIR1}"
mkdir -p "${TMPDIR1}"
if [ $? -ne 0 ]; then
echo "ERROR: failed to create temporary directory"
exit 1
fi
TMPB="qemu-conf"
TMPC="${TMPDIR1}/${TMPB}.c"
TMPO="${TMPDIR1}/${TMPB}.o"
TMPCXX="${TMPDIR1}/${TMPB}.cxx"
TMPE="${TMPDIR1}/${TMPB}.exe"
rm -f config.log
# Print a helpful header at the top of config.log
echo "# QEMU configure log $(date)" >> config.log
printf "# Configured with:" >> config.log
printf " '%s'" "$0" "$@" >> config.log
echo >> config.log
echo "#" >> config.log
quote_sh() {
printf "%s" "$1" | sed "s,','\\\\'',g; s,.*,'&',"
}
print_error() {
(echo
echo "ERROR: $1"
while test -n "$2"; do
echo " $2"
shift
done
echo) >&2
}
error_exit() {
print_error "$@"
exit 1
}
do_compiler() {
# Run the compiler, capturing its output to the log. First argument
# is compiler binary to execute.
compiler="$1"
shift
if test -n "$BASH_VERSION"; then eval '
echo >>config.log "
funcs: ${FUNCNAME[*]}
lines: ${BASH_LINENO[*]}"
'; fi
echo $compiler "$@" >> config.log
$compiler "$@" >> config.log 2>&1 || return $?
# Test passed. If this is an --enable-werror build, rerun
# the test with -Werror and bail out if it fails. This
# makes warning-generating-errors in configure test code
# obvious to developers.
if test "$werror" != "yes"; then
return 0
fi
# Don't bother rerunning the compile if we were already using -Werror
case "$*" in
*-Werror*)
return 0
;;
esac
echo $compiler -Werror "$@" >> config.log
$compiler -Werror "$@" >> config.log 2>&1 && return $?
error_exit "configure test passed without -Werror but failed with -Werror." \
"This is probably a bug in the configure script. The failing command" \
"will be at the bottom of config.log." \
"You can run configure with --disable-werror to bypass this check."
}
do_cc() {
do_compiler "$cc" $CPU_CFLAGS "$@"
}
do_cxx() {
do_compiler "$cxx" $CPU_CFLAGS "$@"
}
# Append $2 to the variable named $1, with space separation
add_to() {
eval $1=\${$1:+\"\$$1 \"}\$2
}
update_cxxflags() {
# Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
# options which some versions of GCC's C++ compiler complain about
# because they only make sense for C programs.
QEMU_CXXFLAGS="-D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS"
CONFIGURE_CXXFLAGS=$(echo "$CONFIGURE_CFLAGS" | sed s/-std=gnu11/-std=gnu++11/)
for arg in $QEMU_CFLAGS; do
case $arg in
-Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
-Wold-style-declaration|-Wold-style-definition|-Wredundant-decls)
;;
*)
QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
;;
esac
done
}
compile_object() {
local_cflags="$1"
do_cc $CFLAGS $EXTRA_CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
}
compile_prog() {
local_cflags="$1"
local_ldflags="$2"
do_cc $CFLAGS $EXTRA_CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC \
$LDFLAGS $EXTRA_LDFLAGS $CONFIGURE_LDFLAGS $QEMU_LDFLAGS $local_ldflags
}
# symbolically link $1 to $2. Portable version of "ln -sf".
symlink() {
rm -rf "$2"
mkdir -p "$(dirname "$2")"
ln -s "$1" "$2"
}
# check whether a command is available to this shell (may be either an
# executable or a builtin)
has() {
type "$1" >/dev/null 2>&1
}
version_ge () {
local_ver1=$(expr "$1" : '\([0-9.]*\)' | tr . ' ')
local_ver2=$(echo "$2" | tr . ' ')
while true; do
set x $local_ver1
local_first=${2-0}
# 'shift 2' if $2 is set, or 'shift' if $2 is not set
shift ${2:+2}
local_ver1=$*
set x $local_ver2
# the second argument finished, the first must be greater or equal
test $# = 1 && return 0
test $local_first -lt $2 && return 1
test $local_first -gt $2 && return 0
shift ${2:+2}
local_ver2=$*
done
}
glob() {
eval test -z '"${1#'"$2"'}"'
}
ld_has() {
$ld --help 2>/dev/null | grep ".$1" >/dev/null 2>&1
}
if printf %s\\n "$source_path" "$PWD" | grep -q "[[:space:]:]";
then
error_exit "main directory cannot contain spaces nor colons"
fi
# default parameters
cpu=""
iasl="iasl"
interp_prefix="/usr/gnemul/qemu-%M"
static="no"
cross_compile="no"
cross_prefix=""
audio_drv_list="default"
block_drv_rw_whitelist=""
block_drv_ro_whitelist=""
host_cc="cc"
debug_info="yes"
lto="false"
stack_protector=""
safe_stack=""
use_containers="yes"
gdb_bin=$(command -v "gdb-multiarch" || command -v "gdb")
if test -e "$source_path/.git"
then
git_submodules_action="update"
else
git_submodules_action="ignore"
fi
git_submodules="ui/keycodemapdb"
git="git"
# Don't accept a target_list environment variable.
unset target_list
unset target_list_exclude
# Default value for a variable defining feature "foo".
# * foo="no" feature will only be used if --enable-foo arg is given
# * foo="" feature will be searched for, and if found, will be used
# unless --disable-foo is given
# * foo="yes" this value will only be set by --enable-foo flag.
# feature will searched for,
# if not found, configure exits with error
#
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
default_feature=""
# parse CC options second
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--without-default-features)
default_feature="no"
;;
esac
done
EXTRA_CFLAGS=""
EXTRA_CXXFLAGS=""
EXTRA_LDFLAGS=""
xen_ctrl_version="$default_feature"
vhost_kernel="$default_feature"
vhost_net="$default_feature"
vhost_crypto="$default_feature"
vhost_scsi="$default_feature"
vhost_vsock="$default_feature"
vhost_user="no"
vhost_user_fs="$default_feature"
vhost_vdpa="$default_feature"
rdma="$default_feature"
pvrdma="$default_feature"
debug_tcg="no"
debug="no"
sanitizers="no"
tsan="no"
fortify_source="$default_feature"
gcov="no"
EXESUF=""
modules="no"
module_upgrades="no"
prefix="/usr/local"
qemu_suffix="qemu"
softmmu="yes"
linux_user=""
bsd_user=""
pkgversion=""
pie=""
trace_backends="log"
trace_file="trace"
opengl="$default_feature"
coroutine=""
tls_priority="NORMAL"
plugins="$default_feature"
secret_keyring="$default_feature"
meson=""
meson_args=""
ninja=""
gio="$default_feature"
skip_meson=no
# The following Meson options are handled manually (still they
# are included in the automatically generated help message)
# 1. Track which submodules are needed
if test "$default_feature" = no ; then
capstone="disabled"
slirp="disabled"
else
capstone="auto"
slirp="auto"
fi
fdt="auto"
# 2. Support --with/--without option
default_devices="true"
# 3. Automatically enable/disable other options
tcg="enabled"
cfi="false"
# 4. Detection partly done in configure
xen=${default_feature:+disabled}
# parse CC options second
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--cross-prefix=*) cross_prefix="$optarg"
cross_compile="yes"
;;
--cc=*) CC="$optarg"
;;
--cxx=*) CXX="$optarg"
;;
--cpu=*) cpu="$optarg"
;;
--extra-cflags=*)
EXTRA_CFLAGS="$EXTRA_CFLAGS $optarg"
EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS $optarg"
;;
--extra-cxxflags=*) EXTRA_CXXFLAGS="$EXTRA_CXXFLAGS $optarg"
;;
--extra-ldflags=*) EXTRA_LDFLAGS="$EXTRA_LDFLAGS $optarg"
;;
--enable-debug-info) debug_info="yes"
;;
--disable-debug-info) debug_info="no"
;;
--cross-cc-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-cc-FOO option"
;;
--cross-cc-cflags-*) cc_arch=${opt#--cross-cc-cflags-}; cc_arch=${cc_arch%%=*}
eval "cross_cc_cflags_${cc_arch}=\$optarg"
cross_cc_vars="$cross_cc_vars cross_cc_cflags_${cc_arch}"
;;
--cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*}
cc_archs="$cc_archs $cc_arch"
eval "cross_cc_${cc_arch}=\$optarg"
cross_cc_vars="$cross_cc_vars cross_cc_${cc_arch}"
;;
esac
done
# OS specific
# Using uname is really, really broken. Once we have the right set of checks
# we can eliminate its usage altogether.
# Preferred compiler:
# ${CC} (if set)
# ${cross_prefix}gcc (if cross-prefix specified)
# system compiler
if test -z "${CC}${cross_prefix}"; then
cc="$host_cc"
else
cc="${CC-${cross_prefix}gcc}"
fi
if test -z "${CXX}${cross_prefix}"; then
cxx="c++"
else
cxx="${CXX-${cross_prefix}g++}"
fi
ar="${AR-${cross_prefix}ar}"
as="${AS-${cross_prefix}as}"
ccas="${CCAS-$cc}"
cpp="${CPP-$cc -E}"
objcopy="${OBJCOPY-${cross_prefix}objcopy}"
ld="${LD-${cross_prefix}ld}"
ranlib="${RANLIB-${cross_prefix}ranlib}"
nm="${NM-${cross_prefix}nm}"
smbd="$SMBD"
strip="${STRIP-${cross_prefix}strip}"
windres="${WINDRES-${cross_prefix}windres}"
pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
query_pkg_config() {
"${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
}
pkg_config=query_pkg_config
sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
# default flags for all hosts
# We use -fwrapv to tell the compiler that we require a C dialect where
# left shift of signed integers is well defined and has the expected
# 2s-complement style results. (Both clang and gcc agree that it
# provides these semantics.)
QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv"
QEMU_CFLAGS="-Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
QEMU_LDFLAGS=
# Flags that are needed during configure but later taken care of by Meson
CONFIGURE_CFLAGS="-std=gnu11 -Wall"
CONFIGURE_LDFLAGS=
check_define() {
cat > $TMPC <<EOF
#if !defined($1)
#error $1 not defined
#endif
int main(void) { return 0; }
EOF
compile_object
}
check_include() {
cat > $TMPC <<EOF
#include <$1>
int main(void) { return 0; }
EOF
compile_object
}
write_c_skeleton() {
cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
}
if check_define __linux__ ; then
targetos=linux
elif check_define _WIN32 ; then
targetos=windows
elif check_define __OpenBSD__ ; then
targetos=openbsd
elif check_define __sun__ ; then
targetos=sunos
elif check_define __HAIKU__ ; then
targetos=haiku
elif check_define __FreeBSD__ ; then
targetos=freebsd
elif check_define __FreeBSD_kernel__ && check_define __GLIBC__; then
targetos=gnu/kfreebsd
elif check_define __DragonFly__ ; then
targetos=dragonfly
elif check_define __NetBSD__; then
targetos=netbsd
elif check_define __APPLE__; then
targetos=darwin
else
# This is a fatal error, but don't report it yet, because we
# might be going to just print the --help text, or it might
# be the result of a missing compiler.
targetos=bogus
fi
# OS specific
mingw32="no"
bsd="no"
linux="no"
solaris="no"
case $targetos in
windows)
mingw32="yes"
plugins="no"
pie="no"
;;
gnu/kfreebsd)
bsd="yes"
;;
freebsd)
bsd="yes"
make="${MAKE-gmake}"
# needed for kinfo_getvmmap(3) in libutil.h
;;
dragonfly)
bsd="yes"
make="${MAKE-gmake}"
;;
netbsd)
bsd="yes"
make="${MAKE-gmake}"
;;
openbsd)
bsd="yes"
make="${MAKE-gmake}"
;;
darwin)
bsd="yes"
darwin="yes"
# Disable attempts to use ObjectiveC features in os/object.h since they
# won't work when we're compiling with gcc as a C compiler.
QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
;;
sunos)
solaris="yes"
make="${MAKE-gmake}"
# needed for CMSG_ macros in sys/socket.h
QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
# needed for TIOCWIN* defines in termios.h
QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
# $(uname -m) returns i86pc even on an x86_64 box, so default based on isainfo
# Note that this check is broken for cross-compilation: if you're
# cross-compiling to one of these OSes then you'll need to specify
# the correct CPU with the --cpu option.
if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
cpu="x86_64"
fi
;;
haiku)
pie="no"
QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS -D_BSD_SOURCE -fPIC $QEMU_CFLAGS"
;;
linux)
linux="yes"
vhost_user=${default_feature:-yes}
;;
esac
if test ! -z "$cpu" ; then
# command line argument
:
elif check_define __i386__ ; then
cpu="i386"
elif check_define __x86_64__ ; then
if check_define __ILP32__ ; then
cpu="x32"
else
cpu="x86_64"
fi
elif check_define __sparc__ ; then
if check_define __arch64__ ; then
cpu="sparc64"
else
cpu="sparc"
fi
elif check_define _ARCH_PPC ; then
if check_define _ARCH_PPC64 ; then
if check_define _LITTLE_ENDIAN ; then
cpu="ppc64le"
else
cpu="ppc64"
fi
else
cpu="ppc"
fi
elif check_define __mips__ ; then
cpu="mips"
elif check_define __s390__ ; then
if check_define __s390x__ ; then
cpu="s390x"
else
cpu="s390"
fi
elif check_define __riscv ; then
cpu="riscv"
elif check_define __arm__ ; then
cpu="arm"
elif check_define __aarch64__ ; then
cpu="aarch64"
elif check_define __loongarch64 ; then
cpu="loongarch64"
else
cpu=$(uname -m)
fi
# Normalise host CPU name, set multilib cflags
# Note that this case should only have supported host CPUs, not guests.
case "$cpu" in
armv*b|armv*l|arm)
cpu="arm" ;;
i386|i486|i586|i686|i86pc|BePC)
cpu="i386"
CPU_CFLAGS="-m32" ;;
x32)
cpu="x86_64"
CPU_CFLAGS="-mx32" ;;
x86_64|amd64)
cpu="x86_64"
# ??? Only extremely old AMD cpus do not have cmpxchg16b.
# If we truly care, we should simply detect this case at
# runtime and generate the fallback to serial emulation.
CPU_CFLAGS="-m64 -mcx16" ;;
mips*)
cpu="mips" ;;
ppc)
CPU_CFLAGS="-m32" ;;
ppc64)
CPU_CFLAGS="-m64 -mbig-endian" ;;
ppc64le)
cpu="ppc64"
CPU_CFLAGS="-m64 -mlittle-endian" ;;
s390)
CPU_CFLAGS="-m31" ;;
s390x)
CPU_CFLAGS="-m64" ;;
sparc|sun4[cdmuv])
cpu="sparc"
CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc" ;;
sparc64)
CPU_CFLAGS="-m64 -mcpu=ultrasparc" ;;
esac
: ${make=${MAKE-make}}
# We prefer python 3.x. A bare 'python' is traditionally
# python 2.x, but some distros have it as python 3.x, so
# we check that too
python=
explicit_python=no
for binary in "${PYTHON-python3}" python
do
if has "$binary"
then
python=$(command -v "$binary")
break
fi
done
# Check for ancillary tools used in testing
genisoimage=
for binary in genisoimage mkisofs
do
if has $binary
then
genisoimage=$(command -v "$binary")
break
fi
done
# Default objcc to clang if available, otherwise use CC
if has clang; then
objcc=clang
else
objcc="$cc"
fi
if test "$mingw32" = "yes" ; then
EXESUF=".exe"
# MinGW needs -mthreads for TLS and macro _MT.
CONFIGURE_CFLAGS="-mthreads $CONFIGURE_CFLAGS"
write_c_skeleton;
prefix="/qemu"
qemu_suffix=""
fi
werror=""
. $source_path/scripts/meson-buildoptions.sh
meson_options=
meson_option_parse() {
meson_options="$meson_options $(_meson_option_parse "$@")"
if test $? -eq 1; then
echo "ERROR: unknown option $1"
echo "Try '$0 --help' for more information"
exit 1
fi
}
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--help|-h) show_help=yes
;;
--version|-V) exec cat $source_path/VERSION
;;
--prefix=*) prefix="$optarg"
;;
--interp-prefix=*) interp_prefix="$optarg"
;;
--cross-prefix=*)
;;
--cc=*)
;;
--host-cc=*) host_cc="$optarg"
;;
--cxx=*)
;;
--iasl=*) iasl="$optarg"
;;
--objcc=*) objcc="$optarg"
;;
--make=*) make="$optarg"
;;
--install=*)
;;
--python=*) python="$optarg" ; explicit_python=yes
;;
--sphinx-build=*) sphinx_build="$optarg"
;;
--skip-meson) skip_meson=yes
;;
--meson=*) meson="$optarg"
;;
--ninja=*) ninja="$optarg"
;;
--smbd=*) smbd="$optarg"
;;
--extra-cflags=*)
;;
--extra-cxxflags=*)
;;
--extra-ldflags=*)
;;
--enable-debug-info)
;;
--disable-debug-info)
;;
--cross-cc-*)
;;
--enable-modules)
modules="yes"
;;
--disable-modules)
modules="no"
;;
--disable-module-upgrades) module_upgrades="no"
;;
--enable-module-upgrades) module_upgrades="yes"
;;
--cpu=*)
;;
--target-list=*) target_list="$optarg"
if test "$target_list_exclude"; then
error_exit "Can't mix --target-list with --target-list-exclude"
fi
;;
--target-list-exclude=*) target_list_exclude="$optarg"
if test "$target_list"; then
error_exit "Can't mix --target-list-exclude with --target-list"
fi
;;
--with-trace-file=*) trace_file="$optarg"
;;
--with-default-devices) default_devices="true"
;;
--without-default-devices) default_devices="false"
;;
--with-devices-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --with-devices-FOO option"
;;
--with-devices-*) device_arch=${opt#--with-devices-};
device_arch=${device_arch%%=*}
cf=$source_path/configs/devices/$device_arch-softmmu/$optarg.mak
if test -f "$cf"; then
device_archs="$device_archs $device_arch"
eval "devices_${device_arch}=\$optarg"
else
error_exit "File $cf does not exist"
fi
;;
--without-default-features) # processed above
;;
--enable-gcov) gcov="yes"
;;
--static)
static="yes"
QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
;;
--mandir=*) mandir="$optarg"
;;
--bindir=*) bindir="$optarg"
;;
--libdir=*) libdir="$optarg"
;;
--libexecdir=*) libexecdir="$optarg"
;;
--includedir=*) includedir="$optarg"
;;
--datadir=*) datadir="$optarg"
;;
--with-suffix=*) qemu_suffix="$optarg"
;;
--docdir=*) docdir="$optarg"
;;
--localedir=*) localedir="$optarg"
;;
--sysconfdir=*) sysconfdir="$optarg"
;;
--localstatedir=*) local_statedir="$optarg"
;;
--firmwarepath=*) firmwarepath="$optarg"
;;
--host=*|--build=*|\
--disable-dependency-tracking|\
--sbindir=*|--sharedstatedir=*|\
--oldincludedir=*|--datarootdir=*|--infodir=*|\
--htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
# These switches are silently ignored, for compatibility with
# autoconf-generated configure scripts. This allows QEMU's
# configure to be used by RPM and similar macros that set
# lots of directory switches by default.
;;
--audio-drv-list=*) audio_drv_list="$optarg"
;;
--block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--enable-debug-tcg) debug_tcg="yes"
;;
--disable-debug-tcg) debug_tcg="no"
;;
--enable-debug)
# Enable debugging options that aren't excessively noisy
debug_tcg="yes"
meson_option_parse --enable-debug-mutex ""
debug="yes"
fortify_source="no"
;;
--enable-sanitizers) sanitizers="yes"
;;
--disable-sanitizers) sanitizers="no"
;;
--enable-tsan) tsan="yes"
;;
--disable-tsan) tsan="no"
;;
--disable-slirp) slirp="disabled"
;;
--enable-slirp) slirp="enabled"
;;
--enable-slirp=git) slirp="internal"
;;
--enable-slirp=*) slirp="$optarg"
;;
--disable-xen) xen="disabled"
;;
--enable-xen) xen="enabled"
;;
--disable-tcg) tcg="disabled"
plugins="no"
;;
--enable-tcg) tcg="enabled"
;;
--disable-system) softmmu="no"
;;
--enable-system) softmmu="yes"
;;
--disable-user)
linux_user="no" ;
bsd_user="no" ;
;;
--enable-user) ;;
--disable-linux-user) linux_user="no"
;;
--enable-linux-user) linux_user="yes"
;;
--disable-bsd-user) bsd_user="no"
;;
--enable-bsd-user) bsd_user="yes"
;;
--enable-pie) pie="yes"
;;
--disable-pie) pie="no"
;;
--enable-werror) werror="yes"
;;
--disable-werror) werror="no"
;;
--enable-lto) lto="true"
;;
--disable-lto) lto="false"
;;
--enable-stack-protector) stack_protector="yes"
;;
--disable-stack-protector) stack_protector="no"
;;
--enable-safe-stack) safe_stack="yes"
;;
--disable-safe-stack) safe_stack="no"
;;
--enable-cfi)
cfi="true";
lto="true";
;;
--disable-cfi) cfi="false"
;;
--disable-fdt) fdt="disabled"
;;
--enable-fdt) fdt="enabled"
;;
--enable-fdt=git) fdt="internal"
;;
--enable-fdt=*) fdt="$optarg"
;;
--with-pkgversion=*) pkgversion="$optarg"
;;
--with-coroutine=*) coroutine="$optarg"
;;
--disable-vhost-net) vhost_net="no"
;;
--enable-vhost-net) vhost_net="yes"
;;
--disable-vhost-crypto) vhost_crypto="no"
;;
--enable-vhost-crypto) vhost_crypto="yes"
;;
--disable-vhost-scsi) vhost_scsi="no"
;;
--enable-vhost-scsi) vhost_scsi="yes"
;;
--disable-vhost-vsock) vhost_vsock="no"
;;
--enable-vhost-vsock) vhost_vsock="yes"
;;
--disable-vhost-user-fs) vhost_user_fs="no"
;;
--enable-vhost-user-fs) vhost_user_fs="yes"
;;
--disable-opengl) opengl="no"
;;
--enable-opengl) opengl="yes"
;;
--disable-zlib-test)
;;
--disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
;;
--enable-vhdx|--disable-vhdx)
echo "$0: $opt is obsolete, VHDX driver is always built" >&2
;;
--enable-uuid|--disable-uuid)
echo "$0: $opt is obsolete, UUID support is always built" >&2
;;
--tls-priority=*) tls_priority="$optarg"
;;
--enable-rdma) rdma="yes"
;;
--disable-rdma) rdma="no"
;;
--enable-pvrdma) pvrdma="yes"
;;
--disable-pvrdma) pvrdma="no"
;;
--disable-vhost-user) vhost_user="no"
;;
--enable-vhost-user) vhost_user="yes"
;;
--disable-vhost-vdpa) vhost_vdpa="no"
;;
--enable-vhost-vdpa) vhost_vdpa="yes"
;;
--disable-vhost-kernel) vhost_kernel="no"
;;
--enable-vhost-kernel) vhost_kernel="yes"
;;
--disable-capstone) capstone="disabled"
;;
--enable-capstone) capstone="enabled"
;;
--enable-capstone=git) capstone="internal"
;;
--enable-capstone=*) capstone="$optarg"
;;
--with-git=*) git="$optarg"
;;
--with-git-submodules=*)
git_submodules_action="$optarg"
;;
--enable-plugins) if test "$mingw32" = "yes"; then
error_exit "TCG plugins not currently supported on Windows platforms"
else
plugins="yes"
fi
;;
--disable-plugins) plugins="no"
;;
--enable-containers) use_containers="yes"
;;
--disable-containers) use_containers="no"
;;
--gdb=*) gdb_bin="$optarg"
;;
--enable-keyring) secret_keyring="yes"
;;
--disable-keyring) secret_keyring="no"
;;
--enable-gio) gio=yes
;;
--disable-gio) gio=no
;;
# backwards compatibility options
--enable-trace-backend=*) meson_option_parse "--enable-trace-backends=$optarg" "$optarg"
;;
--disable-blobs) meson_option_parse --disable-install-blobs ""
;;
--enable-tcmalloc) meson_option_parse --enable-malloc=tcmalloc tcmalloc
;;
--enable-jemalloc) meson_option_parse --enable-malloc=jemalloc jemalloc
;;
# everything else has the same name in configure and meson
--enable-* | --disable-*) meson_option_parse "$opt" "$optarg"
;;
*)
echo "ERROR: unknown option $opt"
echo "Try '$0 --help' for more information"
exit 1
;;
esac
done
# test for any invalid configuration combinations
if test "$plugins" = "yes" -a "$tcg" = "disabled"; then
error_exit "Can't enable plugins on non-TCG builds"
fi
case $git_submodules_action in
update|validate)
if test ! -e "$source_path/.git"; then
echo "ERROR: cannot $git_submodules_action git submodules without .git"
exit 1
fi
;;
ignore)
if ! test -f "$source_path/ui/keycodemapdb/README"
then
echo
echo "ERROR: missing GIT submodules"
echo
if test -e "$source_path/.git"; then
echo "--with-git-submodules=ignore specified but submodules were not"
echo "checked out. Please initialize and update submodules."
else
echo "This is not a GIT checkout but module content appears to"
echo "be missing. Do not use 'git archive' or GitHub download links"
echo "to acquire QEMU source archives. Non-GIT builds are only"
echo "supported with source archives linked from:"
echo
echo " https://www.qemu.org/download/#source"
echo
echo "Developers working with GIT can use scripts/archive-source.sh"
echo "if they need to create valid source archives."
fi
echo
exit 1
fi
;;
*)
echo "ERROR: invalid --with-git-submodules= value '$git_submodules_action'"
exit 1
;;
esac
libdir="${libdir:-$prefix/lib}"
libexecdir="${libexecdir:-$prefix/libexec}"
includedir="${includedir:-$prefix/include}"
if test "$mingw32" = "yes" ; then
bindir="${bindir:-$prefix}"
else
bindir="${bindir:-$prefix/bin}"
fi
mandir="${mandir:-$prefix/share/man}"
datadir="${datadir:-$prefix/share}"
docdir="${docdir:-$prefix/share/doc}"
sysconfdir="${sysconfdir:-$prefix/etc}"
local_statedir="${local_statedir:-$prefix/var}"
firmwarepath="${firmwarepath:-$datadir/qemu-firmware}"
localedir="${localedir:-$datadir/locale}"
if eval test -z "\${cross_cc_$cpu}"; then
eval "cross_cc_${cpu}=\$cc"
cross_cc_vars="$cross_cc_vars cross_cc_${cpu}"
fi
default_target_list=""
mak_wilds=""
if [ "$linux_user" != no ]; then
if [ "$targetos" = linux ] && [ -d $source_path/linux-user/include/host/$cpu ]; then
linux_user=yes
elif [ "$linux_user" = yes ]; then
error_exit "linux-user not supported on this architecture"
fi
fi
if [ "$bsd_user" != no ]; then
if [ "$bsd_user" = "" ]; then
test $targetos = freebsd && bsd_user=yes
fi
if [ "$bsd_user" = yes ] && ! [ -d $source_path/bsd-user/$targetos ]; then
error_exit "bsd-user not supported on this host OS"
fi
fi
if [ "$softmmu" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/configs/targets/*-softmmu.mak"
fi
if [ "$linux_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/configs/targets/*-linux-user.mak"
fi
if [ "$bsd_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/configs/targets/*-bsd-user.mak"
fi
for config in $mak_wilds; do
target="$(basename "$config" .mak)"
if echo "$target_list_exclude" | grep -vq "$target"; then
default_target_list="${default_target_list} $target"
fi
done
if test x"$show_help" = x"yes" ; then
cat << EOF
Usage: configure [options]
Options: [defaults in brackets after descriptions]
Standard options:
--help print this message
--prefix=PREFIX install in PREFIX [$prefix]
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [$interp_prefix]
--target-list=LIST set target list (default: build all)
$(echo Available targets: $default_target_list | \
fold -s -w 53 | sed -e 's/^/ /')
--target-list-exclude=LIST exclude a set of targets from the default target-list
Advanced options (experts only):
--cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix]
--cc=CC use C compiler CC [$cc]
--iasl=IASL use ACPI compiler IASL [$iasl]
--host-cc=CC use C compiler CC [$host_cc] for code run at
build time
--cxx=CXX use C++ compiler CXX [$cxx]
--objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
--extra-cflags=CFLAGS append extra C compiler flags CFLAGS
--extra-cxxflags=CXXFLAGS append extra C++ compiler flags CXXFLAGS
--extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
--cross-cc-ARCH=CC use compiler when building ARCH guest test cases
--cross-cc-cflags-ARCH= use compiler flags when building ARCH guest tests
--make=MAKE use specified make [$make]
--python=PYTHON use specified python [$python]
--sphinx-build=SPHINX use specified sphinx-build [$sphinx_build]
--meson=MESON use specified meson [$meson]
--ninja=NINJA use specified ninja [$ninja]
--smbd=SMBD use specified smbd [$smbd]
--with-git=GIT use specified git [$git]
--with-git-submodules=update update git submodules (default if .git dir exists)
--with-git-submodules=validate fail if git submodules are not up to date
--with-git-submodules=ignore do not update or check git submodules (default if no .git dir)
--static enable static build [$static]
--mandir=PATH install man pages in PATH
--datadir=PATH install firmware in PATH/$qemu_suffix
--localedir=PATH install translation in PATH/$qemu_suffix
--docdir=PATH install documentation in PATH/$qemu_suffix
--bindir=PATH install binaries in PATH
--libdir=PATH install libraries in PATH
--libexecdir=PATH install helper binaries in PATH
--sysconfdir=PATH install config in PATH/$qemu_suffix
--localstatedir=PATH install local state in PATH (set at runtime on win32)
--firmwarepath=PATH search PATH for firmware files
--efi-aarch64=PATH PATH of efi file to use for aarch64 VMs.
--with-suffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir/docdir [$qemu_suffix]
--with-pkgversion=VERS use specified string as sub-version of the package
--without-default-features default all --enable-* options to "disabled"
--without-default-devices do not include any device that is not needed to
start the emulator (only use if you are including
desired devices in configs/devices/)
--with-devices-ARCH=NAME override default configs/devices
--enable-debug enable common debug build options
--enable-sanitizers enable default sanitizers
--enable-tsan enable thread sanitizer
--disable-werror disable compilation abort on warning
--disable-stack-protector disable compiler-provided stack protection
--audio-drv-list=LIST set audio drivers to try if -audiodev is not used
--block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
--block-drv-rw-whitelist=L
set block driver read-write whitelist
(by default affects only QEMU, not tools like qemu-img)
--block-drv-ro-whitelist=L
set block driver read-only whitelist
(by default affects only QEMU, not tools like qemu-img)
--with-trace-file=NAME Full PATH,NAME of file to store traces
Default:trace-<pid>
--cpu=CPU Build for host CPU [$cpu]
--with-coroutine=BACKEND coroutine backend. Supported options:
ucontext, sigaltstack, windows
--enable-gcov enable test coverage analysis with gcov
--tls-priority default TLS protocol/cipher priority string
--enable-plugins
enable plugins via shared library loading
--disable-containers don't use containers for cross-building
--gdb=GDB-path gdb to use for gdbstub tests [$gdb_bin]
EOF
meson_options_help
cat << EOF
system all system emulation targets
user supported user emulation targets
linux-user all linux usermode emulation targets
bsd-user all BSD usermode emulation targets
pie Position Independent Executables
modules modules support (non-Windows)
module-upgrades try to load modules from alternate paths for upgrades
debug-tcg TCG debugging (default is disabled)
debug-info debugging information
lto Enable Link-Time Optimization.
safe-stack SafeStack Stack Smash Protection. Depends on
clang/llvm >= 3.7 and requires coroutine backend ucontext.
rdma Enable RDMA-based migration
pvrdma Enable PVRDMA support
vhost-net vhost-net kernel acceleration support
vhost-vsock virtio sockets device support
vhost-scsi vhost-scsi kernel target support
vhost-crypto vhost-user-crypto backend support
vhost-kernel vhost kernel backend support
vhost-user vhost-user backend support
vhost-vdpa vhost-vdpa kernel backend support
opengl opengl support
gio libgio support
NOTE: The object files are built at the place where configure is launched
EOF
exit 0
fi
# Remove old dependency files to make sure that they get properly regenerated
rm -f */config-devices.mak.d
if test -z "$python"
then
error_exit "Python not found. Use --python=/path/to/python"
fi
if ! has "$make"
then
error_exit "GNU make ($make) not found"
fi
# Note that if the Python conditional here evaluates True we will exit
# with status 1 which is a shell 'false' value.
if ! $python -c 'import sys; sys.exit(sys.version_info < (3,6))'; then
error_exit "Cannot use '$python', Python >= 3.6 is required." \
"Use --python=/path/to/python to specify a supported Python."
fi
# Preserve python version since some functionality is dependent on it
python_version=$($python -c 'import sys; print("%d.%d.%d" % (sys.version_info[0], sys.version_info[1], sys.version_info[2]))' 2>/dev/null)
# Suppress writing compiled files
python="$python -B"
if test -z "$meson"; then
if test "$explicit_python" = no && has meson && version_ge "$(meson --version)" 0.59.3; then
meson=meson
elif test $git_submodules_action != 'ignore' ; then
meson=git
elif test -e "${source_path}/meson/meson.py" ; then
meson=internal
else
if test "$explicit_python" = yes; then
error_exit "--python requires using QEMU's embedded Meson distribution, but it was not found."
else
error_exit "Meson not found. Use --meson=/path/to/meson"
fi
fi
else
# Meson uses its own Python interpreter to invoke other Python scripts,
# but the user wants to use the one they specified with --python.
#
# We do not want to override the distro Python interpreter (and sometimes
# cannot: for example in Homebrew /usr/bin/meson is a bash script), so
# just require --meson=git|internal together with --python.
if test "$explicit_python" = yes; then
case "$meson" in
git | internal) ;;
*) error_exit "--python requires using QEMU's embedded Meson distribution." ;;
esac
fi
fi
if test "$meson" = git; then
git_submodules="${git_submodules} meson"
fi
case "$meson" in
git | internal)
meson="$python ${source_path}/meson/meson.py"
;;
*) meson=$(command -v "$meson") ;;
esac
# Probe for ninja
if test -z "$ninja"; then
for c in ninja ninja-build samu; do
if has $c; then
ninja=$(command -v "$c")
break
fi
done
if test -z "$ninja"; then
error_exit "Cannot find Ninja"
fi
fi
# Check that the C compiler works. Doing this here before testing
# the host CPU ensures that we had a valid CC to autodetect the
# $cpu var (and we should bail right here if that's not the case).
# It also allows the help message to be printed without a CC.
write_c_skeleton;
if compile_object ; then
: C compiler works ok
else
error_exit "\"$cc\" either does not exist or does not work"
fi
if ! compile_prog ; then
error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
fi
# Consult white-list to determine whether to enable werror
# by default. Only enable by default for git builds
if test -z "$werror" ; then
if test "$git_submodules_action" != "ignore" && \
{ test "$linux" = "yes" || test "$mingw32" = "yes"; }; then
werror="yes"
else
werror="no"
fi
fi
if test "$targetos" = "bogus"; then
# Now that we know that we're not printing the help and that
# the compiler works (so the results of the check_defines we used
# to identify the OS are reliable), if we didn't recognize the
# host OS we should stop now.
error_exit "Unrecognized host OS (uname -s reports '$(uname -s)')"
fi
# Check whether the compiler matches our minimum requirements:
cat > $TMPC << EOF
#if defined(__clang_major__) && defined(__clang_minor__)
# ifdef __apple_build_version__
# if __clang_major__ < 10 || (__clang_major__ == 10 && __clang_minor__ < 0)
# error You need at least XCode Clang v10.0 to compile QEMU
# endif
# else
# if __clang_major__ < 6 || (__clang_major__ == 6 && __clang_minor__ < 0)
# error You need at least Clang v6.0 to compile QEMU
# endif
# endif
#elif defined(__GNUC__) && defined(__GNUC_MINOR__)
# if __GNUC__ < 7 || (__GNUC__ == 7 && __GNUC_MINOR__ < 4)
# error You need at least GCC v7.4.0 to compile QEMU
# endif
#else
# error You either need GCC or Clang to compiler QEMU
#endif
int main (void) { return 0; }
EOF
if ! compile_prog "" "" ; then
error_exit "You need at least GCC v7.4 or Clang v6.0 (or XCode Clang v10.0)"
fi
# Accumulate -Wfoo and -Wno-bar separately.
# We will list all of the enable flags first, and the disable flags second.
# Note that we do not add -Werror, because that would enable it for all
# configure tests. If a configure test failed due to -Werror this would
# just silently disable some features, so it's too error prone.
warn_flags=
add_to warn_flags -Wold-style-declaration
add_to warn_flags -Wold-style-definition
add_to warn_flags -Wtype-limits
add_to warn_flags -Wformat-security
add_to warn_flags -Wformat-y2k
add_to warn_flags -Winit-self
add_to warn_flags -Wignored-qualifiers
add_to warn_flags -Wempty-body
add_to warn_flags -Wnested-externs
add_to warn_flags -Wendif-labels
add_to warn_flags -Wexpansion-to-defined
add_to warn_flags -Wimplicit-fallthrough=2
nowarn_flags=
add_to nowarn_flags -Wno-initializer-overrides
add_to nowarn_flags -Wno-missing-include-dirs
add_to nowarn_flags -Wno-shift-negative-value
add_to nowarn_flags -Wno-string-plus-int
add_to nowarn_flags -Wno-typedef-redefinition
add_to nowarn_flags -Wno-tautological-type-limit-compare
add_to nowarn_flags -Wno-psabi
gcc_flags="$warn_flags $nowarn_flags"
cc_has_warning_flag() {
write_c_skeleton;
# Use the positive sense of the flag when testing for -Wno-wombat
# support (gcc will happily accept the -Wno- form of unknown
# warning options).
optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')"
compile_prog "-Werror $optflag" ""
}
for flag in $gcc_flags; do
if cc_has_warning_flag $flag ; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
fi
done
if test "$stack_protector" != "no"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
char arr[64], *p = arr, *c = argv[0];
while (*c) {
*p++ = *c++;
}
return 0;
}
EOF
gcc_flags="-fstack-protector-strong -fstack-protector-all"
sp_on=0
for flag in $gcc_flags; do
# We need to check both a compile and a link, since some compiler
# setups fail only on a .c->.o compile and some only at link time
if compile_object "-Werror $flag" &&
compile_prog "-Werror $flag" ""; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
sp_on=1
break
fi
done
if test "$stack_protector" = yes; then
if test $sp_on = 0; then
error_exit "Stack protector not supported"
fi
fi
fi
# Disable -Wmissing-braces on older compilers that warn even for
# the "universal" C zero initializer {0}.
cat > $TMPC << EOF
struct {
int a[2];
} x = {0};
EOF
if compile_object "-Werror" "" ; then
:
else
QEMU_CFLAGS="$QEMU_CFLAGS -Wno-missing-braces"
fi
# Our module code doesn't support Windows
if test "$modules" = "yes" && test "$mingw32" = "yes" ; then
error_exit "Modules are not available for Windows"
fi
# module_upgrades is only reasonable if modules are enabled
if test "$modules" = "no" && test "$module_upgrades" = "yes" ; then
error_exit "Can't enable module-upgrades as Modules are not enabled"
fi
# Static linking is not possible with plugins, modules or PIE
if test "$static" = "yes" ; then
if test "$modules" = "yes" ; then
error_exit "static and modules are mutually incompatible"
fi
if test "$plugins" = "yes"; then
error_exit "static and plugins are mutually incompatible"
else
plugins="no"
fi
fi
test "$plugins" = "" && plugins=yes
cat > $TMPC << EOF
#ifdef __linux__
# define THREAD __thread
#else
# define THREAD
#endif
static THREAD int tls_var;
int main(void) { return tls_var; }
EOF
# Check we support -fno-pie and -no-pie first; we will need the former for
# building ROMs, and both for everything if --disable-pie is passed.
if compile_prog "-Werror -fno-pie" "-no-pie"; then
CFLAGS_NOPIE="-fno-pie"
LDFLAGS_NOPIE="-no-pie"
fi
if test "$static" = "yes"; then
if test "$pie" != "no" && compile_prog "-Werror -fPIE -DPIE" "-static-pie"; then
CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS"
QEMU_LDFLAGS="-static-pie $QEMU_LDFLAGS"
pie="yes"
elif test "$pie" = "yes"; then
error_exit "-static-pie not available due to missing toolchain support"
else
QEMU_LDFLAGS="-static $QEMU_LDFLAGS"
pie="no"
fi
elif test "$pie" = "no"; then
CONFIGURE_CFLAGS="$CFLAGS_NOPIE $CONFIGURE_CFLAGS"
CONFIGURE_LDFLAGS="$LDFLAGS_NOPIE $CONFIGURE_LDFLAGS"
elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then
CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS"
CONFIGURE_LDFLAGS="-pie $CONFIGURE_LDFLAGS"
pie="yes"
elif test "$pie" = "yes"; then
error_exit "PIE not available due to missing toolchain support"
else
echo "Disabling PIE due to missing toolchain support"
pie="no"
fi
# Detect support for PT_GNU_RELRO + DT_BIND_NOW.
# The combination is known as "full relro", because .got.plt is read-only too.
if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then
QEMU_LDFLAGS="-Wl,-z,relro -Wl,-z,now $QEMU_LDFLAGS"
fi
##########################################
# __sync_fetch_and_and requires at least -march=i486. Many toolchains
# use i686 as default anyway, but for those that don't, an explicit
# specification is necessary
if test "$cpu" = "i386"; then
cat > $TMPC << EOF
static int sfaa(int *ptr)
{
return __sync_fetch_and_and(ptr, 0);
}
int main(void)
{
int val = 42;
val = __sync_val_compare_and_swap(&val, 0, 1);
sfaa(&val);
return val;
}
EOF
if ! compile_prog "" "" ; then
QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
fi
fi
if test "$tcg" = "enabled"; then
git_submodules="$git_submodules tests/fp/berkeley-testfloat-3"
git_submodules="$git_submodules tests/fp/berkeley-softfloat-3"
fi
if test -z "${target_list+xxx}" ; then
default_targets=yes
for target in $default_target_list; do
target_list="$target_list $target"
done
target_list="${target_list# }"
else
default_targets=no
target_list=$(echo "$target_list" | sed -e 's/,/ /g')
for target in $target_list; do
# Check that we recognised the target name; this allows a more
# friendly error message than if we let it fall through.
case " $default_target_list " in
*" $target "*)
;;
*)
error_exit "Unknown target name '$target'"
;;
esac
done
fi
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
;;
*) softmmu=no
;;
esac
feature_not_found() {
feature=$1
remedy=$2
error_exit "User requested feature $feature" \
"configure was not able to find it." \
"$remedy"
}
# ---
# big/little endian test
cat > $TMPC << EOF
#include <stdio.h>
short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
int main(int argc, char *argv[])
{
return printf("%s %s\n", (char *)big_endian, (char *)little_endian);
}
EOF
if compile_prog ; then
if strings -a $TMPE | grep -q BiGeNdIaN ; then
bigendian="yes"
elif strings -a $TMPE | grep -q LiTtLeEnDiAn ; then
bigendian="no"
else
echo big/little test failed
exit 1
fi
else
echo big/little test failed
exit 1
fi
#########################################
# vhost interdependencies and host support
# vhost backends
if test "$vhost_user" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-user is only available on Linux"
fi
test "$vhost_vdpa" = "" && vhost_vdpa=$linux
if test "$vhost_vdpa" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-vdpa is only available on Linux"
fi
test "$vhost_kernel" = "" && vhost_kernel=$linux
if test "$vhost_kernel" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-kernel is only available on Linux"
fi
# vhost-kernel devices
test "$vhost_scsi" = "" && vhost_scsi=$vhost_kernel
if test "$vhost_scsi" = "yes" && test "$vhost_kernel" != "yes"; then
error_exit "--enable-vhost-scsi requires --enable-vhost-kernel"
fi
test "$vhost_vsock" = "" && vhost_vsock=$vhost_kernel
if test "$vhost_vsock" = "yes" && test "$vhost_kernel" != "yes"; then
error_exit "--enable-vhost-vsock requires --enable-vhost-kernel"
fi
# vhost-user backends
test "$vhost_net_user" = "" && vhost_net_user=$vhost_user
if test "$vhost_net_user" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-net-user requires --enable-vhost-user"
fi
test "$vhost_crypto" = "" && vhost_crypto=$vhost_user
if test "$vhost_crypto" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-crypto requires --enable-vhost-user"
fi
test "$vhost_user_fs" = "" && vhost_user_fs=$vhost_user
if test "$vhost_user_fs" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-user-fs requires --enable-vhost-user"
fi
#vhost-vdpa backends
test "$vhost_net_vdpa" = "" && vhost_net_vdpa=$vhost_vdpa
if test "$vhost_net_vdpa" = "yes" && test "$vhost_vdpa" = "no"; then
error_exit "--enable-vhost-net-vdpa requires --enable-vhost-vdpa"
fi
# OR the vhost-kernel, vhost-vdpa and vhost-user values for simplicity
if test "$vhost_net" = ""; then
test "$vhost_net_user" = "yes" && vhost_net=yes
test "$vhost_net_vdpa" = "yes" && vhost_net=yes
test "$vhost_kernel" = "yes" && vhost_net=yes
fi
##########################################
# pkg-config probe
if ! has "$pkg_config_exe"; then
error_exit "pkg-config binary '$pkg_config_exe' not found"
fi
##########################################
# xen probe
if test "$xen" != "disabled" ; then
# Check whether Xen library path is specified via --extra-ldflags to avoid
# overriding this setting with pkg-config output. If not, try pkg-config
# to obtain all needed flags.
if ! echo $EXTRA_LDFLAGS | grep tools/libxc > /dev/null && \
$pkg_config --exists xencontrol ; then
xen_ctrl_version="$(printf '%d%02d%02d' \
$($pkg_config --modversion xencontrol | sed 's/\./ /g') )"
xen=enabled
xen_pc="xencontrol xenstore xenforeignmemory xengnttab"
xen_pc="$xen_pc xenevtchn xendevicemodel"
if $pkg_config --exists xentoolcore; then
xen_pc="$xen_pc xentoolcore"
fi
xen_cflags="$($pkg_config --cflags $xen_pc)"
xen_libs="$($pkg_config --libs $xen_pc)"
else
xen_libs="-lxenstore -lxenctrl"
xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
# First we test whether Xen headers and libraries are available.
# If no, we are done and there is no Xen support.
# If yes, more tests are run to detect the Xen version.
# Xen (any)
cat > $TMPC <<EOF
#include <xenctrl.h>
int main(void) {
return 0;
}
EOF
if ! compile_prog "" "$xen_libs" ; then
# Xen not found
if test "$xen" = "enabled" ; then
feature_not_found "xen" "Install xen devel"
fi
xen=disabled
# Xen unstable
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_DEVICEMODEL_API
#define __XEN_TOOLS__
#include <xendevicemodel.h>
#include <xenforeignmemory.h>
int main(void) {
xendevicemodel_handle *xd;
xenforeignmemory_handle *xfmem;
xd = xendevicemodel_open(0, 0);
xendevicemodel_pin_memory_cacheattr(xd, 0, 0, 0, 0);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map_resource(xfmem, 0, 0, 0, 0, 0, NULL, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
xen_ctrl_version=41100
xen=enabled
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenforeignmemory.h>
#include <xentoolcore.h>
int main(void) {
xenforeignmemory_handle *xfmem;
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map2(xfmem, 0, 0, 0, 0, 0, 0, 0);
xentoolcore_restrict_all(0);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
xen_ctrl_version=41000
xen=enabled
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_DEVICEMODEL_API
#define __XEN_TOOLS__
#include <xendevicemodel.h>
int main(void) {
xendevicemodel_handle *xd;
xd = xendevicemodel_open(0, 0);
xendevicemodel_close(xd);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs"
xen_ctrl_version=40900
xen=enabled
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*
* Also, check if xengnttab_grant_copy_segment_t is defined and
* grant copy operation is implemented.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xengnttab_grant_copy_segment_t* seg = NULL;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_grant_copy(xg, 0, seg);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=40800
xen=enabled
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_map_grant_ref(xg, 0, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=40701
xen=enabled
# Xen 4.6
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xc_reserved_device_memory_map(xc, 0, 0, 0, 0, NULL, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40600
xen=enabled
# Xen 4.5
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40500
xen=enabled
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40200
xen=enabled
else
if test "$xen" = "enabled" ; then
feature_not_found "xen (unsupported version)" \
"Install a supported xen (xen 4.2 or newer)"
fi
xen=disabled
fi
if test "$xen" = enabled; then
if test $xen_ctrl_version -ge 40701 ; then
xen_libs="$xen_libs $xen_stable_libs "
fi
fi
fi
fi
##########################################
# RDMA needs OpenFabrics libraries
if test "$rdma" != "no" ; then
cat > $TMPC <<EOF
#include <rdma/rdma_cma.h>
int main(void) { return 0; }
EOF
rdma_libs="-lrdmacm -libverbs -libumad"
if compile_prog "" "$rdma_libs" ; then
rdma="yes"
else
if test "$rdma" = "yes" ; then
error_exit \
" OpenFabrics librdmacm/libibverbs/libibumad not present." \
" Your options:" \
" (1) Fast: Install infiniband packages (devel) from your distro." \
" (2) Cleanest: Install libraries from www.openfabrics.org" \
" (3) Also: Install softiwarp if you don't have RDMA hardware"
fi
rdma="no"
fi
fi
##########################################
# PVRDMA detection
cat > $TMPC <<EOF &&
#include <sys/mman.h>
int
main(void)
{
char buf = 0;
void *addr = &buf;
addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED);
return 0;
}
EOF
if test "$rdma" = "yes" ; then
case "$pvrdma" in
"")
if compile_prog "" ""; then
pvrdma="yes"
else
pvrdma="no"
fi
;;
"yes")
if ! compile_prog "" ""; then
error_exit "PVRDMA is not supported since mremap is not implemented"
fi
pvrdma="yes"
;;
"no")
pvrdma="no"
;;
esac
else
if test "$pvrdma" = "yes" ; then
error_exit "PVRDMA requires rdma suppport"
fi
pvrdma="no"
fi
# Let's see if enhanced reg_mr is supported
if test "$pvrdma" = "yes" ; then
cat > $TMPC <<EOF &&
#include <infiniband/verbs.h>
int
main(void)
{
struct ibv_mr *mr;
struct ibv_pd *pd = NULL;
size_t length = 10;
uint64_t iova = 0;
int access = 0;
void *addr = NULL;
mr = ibv_reg_mr_iova(pd, addr, length, iova, access);
ibv_dereg_mr(mr);
return 0;
}
EOF
if ! compile_prog "" "-libverbs"; then
QEMU_CFLAGS="$QEMU_CFLAGS -DLEGACY_RDMA_REG_MR"
fi
fi
##########################################
# glib support probe
glib_req_ver=2.56
glib_modules=gthread-2.0
if test "$modules" = yes; then
glib_modules="$glib_modules gmodule-export-2.0"
elif test "$plugins" = "yes"; then
glib_modules="$glib_modules gmodule-no-export-2.0"
fi
for i in $glib_modules; do
if $pkg_config --atleast-version=$glib_req_ver $i; then
glib_cflags=$($pkg_config --cflags $i)
glib_libs=$($pkg_config --libs $i)
else
error_exit "glib-$glib_req_ver $i is required to compile QEMU"
fi
done
# This workaround is required due to a bug in pkg-config file for glib as it
# doesn't define GLIB_STATIC_COMPILATION for pkg-config --static
if test "$static" = yes && test "$mingw32" = yes; then
glib_cflags="-DGLIB_STATIC_COMPILATION $glib_cflags"
fi
if ! test "$gio" = "no"; then
pass=no
if $pkg_config --atleast-version=$glib_req_ver gio-2.0; then
gio_cflags=$($pkg_config --cflags gio-2.0)
gio_libs=$($pkg_config --libs gio-2.0)
gdbus_codegen=$($pkg_config --variable=gdbus_codegen gio-2.0)
if ! has "$gdbus_codegen"; then
gdbus_codegen=
fi
# Check that the libraries actually work -- Ubuntu 18.04 ships
# with pkg-config --static --libs data for gio-2.0 that is missing
# -lblkid and will give a link error.
cat > $TMPC <<EOF
#include <gio/gio.h>
int main(void)
{
g_dbus_proxy_new_sync(0, 0, 0, 0, 0, 0, 0, 0);
return 0;
}
EOF
if compile_prog "$gio_cflags" "$gio_libs" ; then
pass=yes
else
pass=no
fi
if test "$pass" = "yes" &&
$pkg_config --atleast-version=$glib_req_ver gio-unix-2.0; then
gio_cflags="$gio_cflags $($pkg_config --cflags gio-unix-2.0)"
gio_libs="$gio_libs $($pkg_config --libs gio-unix-2.0)"
fi
fi
if test "$pass" = "no"; then
if test "$gio" = "yes"; then
feature_not_found "gio" "Install libgio >= 2.0"
else
gio=no
fi
else
gio=yes
fi
fi
# Sanity check that the current size_t matches the
# size that glib thinks it should be. This catches
# problems on multi-arch where people try to build
# 32-bit QEMU while pointing at 64-bit glib headers
cat > $TMPC <<EOF
#include <glib.h>
#include <unistd.h>
#define QEMU_BUILD_BUG_ON(x) \
typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
int main(void) {
QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
return 0;
}
EOF
if ! compile_prog "$glib_cflags" "$glib_libs" ; then
error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
"You probably need to set PKG_CONFIG_LIBDIR"\
"to point to the right pkg-config files for your"\
"build target"
fi
# Silence clang warnings triggered by glib < 2.57.2
cat > $TMPC << EOF
#include <glib.h>
typedef struct Foo {
int i;
} Foo;
static void foo_free(Foo *f)
{
g_free(f);
}
G_DEFINE_AUTOPTR_CLEANUP_FUNC(Foo, foo_free);
int main(void) { return 0; }
EOF
if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
if cc_has_warning_flag "-Wno-unused-function"; then
glib_cflags="$glib_cflags -Wno-unused-function"
CONFIGURE_CFLAGS="$CONFIGURE_CFLAGS -Wno-unused-function"
fi
fi
##########################################
# SHA command probe for modules
if test "$modules" = yes; then
shacmd_probe="sha1sum sha1 shasum"
for c in $shacmd_probe; do
if has $c; then
shacmd="$c"
break
fi
done
if test "$shacmd" = ""; then
error_exit "one of the checksum commands is required to enable modules: $shacmd_probe"
fi
fi
##########################################
# fdt probe
case "$fdt" in
auto | enabled | internal)
# Simpler to always update submodule, even if not needed.
git_submodules="${git_submodules} dtc"
;;
esac
##########################################
# opengl probe (for sdl2, gtk)
if test "$opengl" != "no" ; then
epoxy=no
if $pkg_config epoxy; then
cat > $TMPC << EOF
#include <epoxy/egl.h>
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
epoxy=yes
fi
fi
if test "$epoxy" = "yes" ; then
opengl_cflags="$($pkg_config --cflags epoxy)"
opengl_libs="$($pkg_config --libs epoxy)"
opengl=yes
else
if test "$opengl" = "yes" ; then
feature_not_found "opengl" "Please install epoxy with EGL"
fi
opengl_cflags=""
opengl_libs=""
opengl=no
fi
fi
# check for usbfs
have_usbfs=no
if test "$linux_user" = "yes"; then
cat > $TMPC << EOF
#include <linux/usbdevice_fs.h>
#ifndef USBDEVFS_GET_CAPABILITIES
#error "USBDEVFS_GET_CAPABILITIES undefined"
#endif
#ifndef USBDEVFS_DISCONNECT_CLAIM
#error "USBDEVFS_DISCONNECT_CLAIM undefined"
#endif
int main(void)
{
return 0;
}
EOF
if compile_prog "" ""; then
have_usbfs=yes
fi
fi
##########################################
# capstone
case "$capstone" in
auto | enabled | internal)
# Simpler to always update submodule, even if not needed.
git_submodules="${git_submodules} capstone"
;;
esac
##########################################
# check and set a backend for coroutine
# We prefer ucontext, but it's not always possible. The fallback
# is sigcontext. On Windows the only valid backend is the Windows
# specific one.
ucontext_works=no
if test "$darwin" != "yes"; then
cat > $TMPC << EOF
#include <ucontext.h>
#ifdef __stub_makecontext
#error Ignoring glibc stub makecontext which will always fail
#endif
int main(void) { makecontext(0, 0, 0); return 0; }
EOF
if compile_prog "" "" ; then
ucontext_works=yes
fi
fi
if test "$coroutine" = ""; then
if test "$mingw32" = "yes"; then
coroutine=win32
elif test "$ucontext_works" = "yes"; then
coroutine=ucontext
else
coroutine=sigaltstack
fi
else
case $coroutine in
windows)
if test "$mingw32" != "yes"; then
error_exit "'windows' coroutine backend only valid for Windows"
fi
# Unfortunately the user visible backend name doesn't match the
# coroutine-*.c filename for this case, so we have to adjust it here.
coroutine=win32
;;
ucontext)
if test "$ucontext_works" != "yes"; then
feature_not_found "ucontext"
fi
;;
sigaltstack)
if test "$mingw32" = "yes"; then
error_exit "only the 'windows' coroutine backend is valid for Windows"
fi
;;
*)
error_exit "unknown coroutine backend $coroutine"
;;
esac
fi
##################################################
# SafeStack
if test "$safe_stack" = "yes"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
#if ! __has_feature(safe_stack)
#error SafeStack Disabled
#endif
return 0;
}
EOF
flag="-fsanitize=safe-stack"
# Check that safe-stack is supported and enabled.
if compile_prog "-Werror $flag" "$flag"; then
# Flag needed both at compilation and at linking
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
else
error_exit "SafeStack not supported by your compiler"
fi
if test "$coroutine" != "ucontext"; then
error_exit "SafeStack is only supported by the coroutine backend ucontext"
fi
else
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
#if defined(__has_feature)
#if __has_feature(safe_stack)
#error SafeStack Enabled
#endif
#endif
return 0;
}
EOF
if test "$safe_stack" = "no"; then
# Make sure that safe-stack is disabled
if ! compile_prog "-Werror" ""; then
# SafeStack was already enabled, try to explicitly remove the feature
flag="-fno-sanitize=safe-stack"
if ! compile_prog "-Werror $flag" "$flag"; then
error_exit "Configure cannot disable SafeStack"
fi
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
fi
else # "$safe_stack" = ""
# Set safe_stack to yes or no based on pre-existing flags
if compile_prog "-Werror" ""; then
safe_stack="no"
else
safe_stack="yes"
if test "$coroutine" != "ucontext"; then
error_exit "SafeStack is only supported by the coroutine backend ucontext"
fi
fi
fi
fi
########################################
# check if __[u]int128_t is usable.
int128=no
cat > $TMPC << EOF
__int128_t a;
__uint128_t b;
int main (void) {
a = a + b;
b = a * b;
a = a * a;
return 0;
}
EOF
if compile_prog "" "" ; then
int128=yes
fi
#########################################
# See if 128-bit atomic operations are supported.
atomic128=no
if test "$int128" = "yes"; then
cat > $TMPC << EOF
int main(void)
{
unsigned __int128 x = 0, y = 0;
y = __atomic_load(&x, 0);
__atomic_store(&x, y, 0);
__atomic_compare_exchange(&x, &y, x, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
atomic128=yes
fi
fi
cmpxchg128=no
if test "$int128" = yes && test "$atomic128" = no; then
cat > $TMPC << EOF
int main(void)
{
unsigned __int128 x = 0, y = 0;
__sync_val_compare_and_swap_16(&x, y, x);
return 0;
}
EOF
if compile_prog "" "" ; then
cmpxchg128=yes
fi
fi
########################################
# check if ccache is interfering with
# semantic analysis of macros
unset CCACHE_CPP2
ccache_cpp2=no
cat > $TMPC << EOF
static const int Z = 1;
#define fn() ({ Z; })
#define TAUT(X) ((X) == Z)
#define PAREN(X, Y) (X == Y)
#define ID(X) (X)
int main(int argc, char *argv[])
{
int x = 0, y = 0;
x = ID(x);
x = fn();
fn();
if (PAREN(x, y)) return 0;
if (TAUT(Z)) return 0;
return 0;
}
EOF
if ! compile_object "-Werror"; then
ccache_cpp2=yes
fi
#################################################
# clang does not support glibc + FORTIFY_SOURCE.
if test "$fortify_source" != "no"; then
if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then
fortify_source="no";
elif test -n "$cxx" && has $cxx &&
echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then
fortify_source="no";
else
fortify_source="yes"
fi
fi
##########################################
# checks for sanitizers
have_asan=no
have_ubsan=no
have_asan_iface_h=no
have_asan_iface_fiber=no
if test "$sanitizers" = "yes" ; then
write_c_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" ""; then
have_asan=yes
fi
# we could use a simple skeleton for flags checks, but this also
# detect the static linking issue of ubsan, see also:
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84285
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) {
void *tmp = malloc(10);
if (tmp != NULL) {
return *(int *)(tmp + 2);
}
return 1;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=undefined" ""; then
have_ubsan=yes
fi
if check_include "sanitizer/asan_interface.h" ; then
have_asan_iface_h=yes
fi
cat > $TMPC << EOF
#include <sanitizer/asan_interface.h>
int main(void) {
__sanitizer_start_switch_fiber(0, 0, 0);
return 0;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" "" ; then
have_asan_iface_fiber=yes
fi
fi
# Thread sanitizer is, for now, much noisier than the other sanitizers;
# keep it separate until that is not the case.
if test "$tsan" = "yes" && test "$sanitizers" = "yes"; then
error_exit "TSAN is not supported with other sanitiziers."
fi
have_tsan=no
have_tsan_iface_fiber=no
if test "$tsan" = "yes" ; then
write_c_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=thread" "" ; then
have_tsan=yes
fi
cat > $TMPC << EOF
#include <sanitizer/tsan_interface.h>
int main(void) {
__tsan_create_fiber(0);
return 0;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=thread" "" ; then
have_tsan_iface_fiber=yes
fi
fi
##########################################
# check for slirp
case "$slirp" in
auto | enabled | internal)
# Simpler to always update submodule, even if not needed.
git_submodules="${git_submodules} slirp"
;;
esac
##########################################
# check for usable __NR_keyctl syscall
if test "$linux" = "yes" ; then
have_keyring=no
cat > $TMPC << EOF
#include <errno.h>
#include <asm/unistd.h>
#include <linux/keyctl.h>
#include <unistd.h>
int main(void) {
return syscall(__NR_keyctl, KEYCTL_READ, 0, NULL, NULL, 0);
}
EOF
if compile_prog "" "" ; then
have_keyring=yes
fi
fi
if test "$secret_keyring" != "no"
then
if test "$have_keyring" = "yes"
then
secret_keyring=yes
else
if test "$secret_keyring" = "yes"
then
error_exit "syscall __NR_keyctl requested, \
but not implemented on your system"
else
secret_keyring=no
fi
fi
fi
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
write_c_skeleton
if test "$gcov" = "yes" ; then
:
elif test "$fortify_source" = "yes" ; then
QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
debug=no
fi
case "$ARCH" in
alpha)
# Ensure there's only a single GP
QEMU_CFLAGS="-msmall-data $QEMU_CFLAGS"
;;
esac
if test "$have_asan" = "yes"; then
QEMU_CFLAGS="-fsanitize=address $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=address $QEMU_LDFLAGS"
if test "$have_asan_iface_h" = "no" ; then
echo "ASAN build enabled, but ASAN header missing." \
"Without code annotation, the report may be inferior."
elif test "$have_asan_iface_fiber" = "no" ; then
echo "ASAN build enabled, but ASAN header is too old." \
"Without code annotation, the report may be inferior."
fi
fi
if test "$have_tsan" = "yes" ; then
if test "$have_tsan_iface_fiber" = "yes" ; then
QEMU_CFLAGS="-fsanitize=thread $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=thread $QEMU_LDFLAGS"
else
error_exit "Cannot enable TSAN due to missing fiber annotation interface."
fi
elif test "$tsan" = "yes" ; then
error_exit "Cannot enable TSAN due to missing sanitize thread interface."
fi
if test "$have_ubsan" = "yes"; then
QEMU_CFLAGS="-fsanitize=undefined $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=undefined $QEMU_LDFLAGS"
fi
##########################################
# Exclude --warn-common with TSan to suppress warnings from the TSan libraries.
if test "$solaris" = "no" && test "$tsan" = "no"; then
if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
QEMU_LDFLAGS="-Wl,--warn-common $QEMU_LDFLAGS"
fi
fi
# Use ASLR, no-SEH and DEP if available
if test "$mingw32" = "yes" ; then
flags="--no-seh --nxcompat"
# Disable ASLR for debug builds to allow debugging with gdb
if test "$debug" = "no" ; then
flags="--dynamicbase $flags"
fi
for flag in $flags; do
if ld_has $flag ; then
QEMU_LDFLAGS="-Wl,$flag $QEMU_LDFLAGS"
fi
done
fi
# Guest agent Windows MSI package
if test "$QEMU_GA_MANUFACTURER" = ""; then
QEMU_GA_MANUFACTURER=QEMU
fi
if test "$QEMU_GA_DISTRO" = ""; then
QEMU_GA_DISTRO=Linux
fi
if test "$QEMU_GA_VERSION" = ""; then
QEMU_GA_VERSION=$(cat $source_path/VERSION)
fi
QEMU_GA_MSI_MINGW_DLL_PATH="$($pkg_config --variable=prefix glib-2.0)/bin"
# Mac OS X ships with a broken assembler
roms=
if { test "$cpu" = "i386" || test "$cpu" = "x86_64"; } && \
test "$targetos" != "darwin" && test "$targetos" != "sunos" && \
test "$targetos" != "haiku" && test "$softmmu" = yes ; then
# Different host OS linkers have different ideas about the name of the ELF
# emulation. Linux and OpenBSD/amd64 use 'elf_i386'; FreeBSD uses the _fbsd
# variant; OpenBSD/i386 uses the _obsd variant; and Windows uses i386pe.
for emu in elf_i386 elf_i386_fbsd elf_i386_obsd i386pe; do
if "$ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
ld_i386_emulation="$emu"
roms="optionrom"
break
fi
done
fi
# Only build s390-ccw bios if we're on s390x and the compiler has -march=z900
# or -march=z10 (which is the lowest architecture level that Clang supports)
if test "$cpu" = "s390x" ; then
write_c_skeleton
compile_prog "-march=z900" ""
has_z900=$?
if [ $has_z900 = 0 ] || compile_object "-march=z10 -msoft-float -Werror"; then
if [ $has_z900 != 0 ]; then
echo "WARNING: Your compiler does not support the z900!"
echo " The s390-ccw bios will only work with guest CPUs >= z10."
fi
roms="$roms s390-ccw"
# SLOF is required for building the s390-ccw firmware on s390x,
# since it is using the libnet code from SLOF for network booting.
git_submodules="${git_submodules} roms/SLOF"
fi
fi
# Check that the C++ compiler exists and works with the C compiler.
# All the QEMU_CXXFLAGS are based on QEMU_CFLAGS. Keep this at the end to don't miss any other that could be added.
if has $cxx; then
cat > $TMPC <<EOF
int c_function(void);
int main(void) { return c_function(); }
EOF
compile_object
cat > $TMPCXX <<EOF
extern "C" {
int c_function(void);
}
int c_function(void) { return 42; }
EOF
update_cxxflags
if do_cxx $CXXFLAGS $EXTRA_CXXFLAGS $CONFIGURE_CXXFLAGS $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $QEMU_LDFLAGS; then
# C++ compiler $cxx works ok with C compiler $cc
:
else
echo "C++ compiler $cxx does not work with C compiler $cc"
echo "Disabling C++ specific optional code"
cxx=
fi
else
echo "No C++ compiler available; disabling C++ specific optional code"
cxx=
fi
if !(GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then
exit 1
fi
config_host_mak="config-host.mak"
echo "# Automatically generated by configure - do not modify" > $config_host_mak
echo >> $config_host_mak
echo all: >> $config_host_mak
echo "GIT=$git" >> $config_host_mak
echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak
echo "GIT_SUBMODULES_ACTION=$git_submodules_action" >> $config_host_mak
if test "$debug_tcg" = "yes" ; then
echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
fi
if test "$mingw32" = "yes" ; then
echo "CONFIG_WIN32=y" >> $config_host_mak
echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >> $config_host_mak
echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
else
echo "CONFIG_POSIX=y" >> $config_host_mak
fi
if test "$linux" = "yes" ; then
echo "CONFIG_LINUX=y" >> $config_host_mak
fi
if test "$darwin" = "yes" ; then
echo "CONFIG_DARWIN=y" >> $config_host_mak
fi
if test "$solaris" = "yes" ; then
echo "CONFIG_SOLARIS=y" >> $config_host_mak
fi
if test "$static" = "yes" ; then
echo "CONFIG_STATIC=y" >> $config_host_mak
fi
echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
qemu_version=$(head $source_path/VERSION)
echo "PKGVERSION=$pkgversion" >>$config_host_mak
echo "SRC_PATH=$source_path" >> $config_host_mak
echo "TARGET_DIRS=$target_list" >> $config_host_mak
if test "$modules" = "yes"; then
# $shacmd can generate a hash started with digit, which the compiler doesn't
# like as an symbol. So prefix it with an underscore
echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
if test "$module_upgrades" = "yes"; then
echo "CONFIG_MODULE_UPGRADES=y" >> $config_host_mak
fi
if test "$have_usbfs" = "yes" ; then
echo "CONFIG_USBFS=y" >> $config_host_mak
fi
if test "$gio" = "yes" ; then
echo "CONFIG_GIO=y" >> $config_host_mak
echo "GIO_CFLAGS=$gio_cflags" >> $config_host_mak
echo "GIO_LIBS=$gio_libs" >> $config_host_mak
fi
if test "$gdbus_codegen" != "" ; then
echo "GDBUS_CODEGEN=$gdbus_codegen" >> $config_host_mak
fi
echo "CONFIG_TLS_PRIORITY=\"$tls_priority\"" >> $config_host_mak
if test "$xen" = "enabled" ; then
echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
echo "XEN_CFLAGS=$xen_cflags" >> $config_host_mak
echo "XEN_LIBS=$xen_libs" >> $config_host_mak
fi
if test "$vhost_scsi" = "yes" ; then
echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
fi
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_host_mak
fi
if test "$vhost_net_user" = "yes" ; then
echo "CONFIG_VHOST_NET_USER=y" >> $config_host_mak
fi
if test "$vhost_net_vdpa" = "yes" ; then
echo "CONFIG_VHOST_NET_VDPA=y" >> $config_host_mak
fi
if test "$vhost_crypto" = "yes" ; then
echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
fi
if test "$vhost_vsock" = "yes" ; then
echo "CONFIG_VHOST_VSOCK=y" >> $config_host_mak
if test "$vhost_user" = "yes" ; then
echo "CONFIG_VHOST_USER_VSOCK=y" >> $config_host_mak
fi
fi
if test "$vhost_kernel" = "yes" ; then
echo "CONFIG_VHOST_KERNEL=y" >> $config_host_mak
fi
if test "$vhost_user" = "yes" ; then
echo "CONFIG_VHOST_USER=y" >> $config_host_mak
fi
if test "$vhost_vdpa" = "yes" ; then
echo "CONFIG_VHOST_VDPA=y" >> $config_host_mak
fi
if test "$vhost_user_fs" = "yes" ; then
echo "CONFIG_VHOST_USER_FS=y" >> $config_host_mak
fi
if test "$tcg" = "enabled" -a "$tcg_interpreter" = "true" ; then
echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
fi
if test "$opengl" = "yes" ; then
echo "CONFIG_OPENGL=y" >> $config_host_mak
echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak
echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
fi
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
echo "CONFIG_BSD=y" >> $config_host_mak
fi
echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
if test "$have_asan_iface_fiber" = "yes" ; then
echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak
fi
if test "$have_tsan" = "yes" && test "$have_tsan_iface_fiber" = "yes" ; then
echo "CONFIG_TSAN=y" >> $config_host_mak
fi
if test "$int128" = "yes" ; then
echo "CONFIG_INT128=y" >> $config_host_mak
fi
if test "$atomic128" = "yes" ; then
echo "CONFIG_ATOMIC128=y" >> $config_host_mak
fi
if test "$cmpxchg128" = "yes" ; then
echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
fi
if test "$rdma" = "yes" ; then
echo "CONFIG_RDMA=y" >> $config_host_mak
echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak
fi
if test "$pvrdma" = "yes" ; then
echo "CONFIG_PVRDMA=y" >> $config_host_mak
fi
if test "$plugins" = "yes" ; then
echo "CONFIG_PLUGIN=y" >> $config_host_mak
fi
if test -n "$gdb_bin"; then
gdb_version=$($gdb_bin --version | head -n 1)
if version_ge ${gdb_version##* } 9.1; then
echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak
fi
fi
if test "$secret_keyring" = "yes" ; then
echo "CONFIG_SECRET_KEYRING=y" >> $config_host_mak
fi
echo "ROMS=$roms" >> $config_host_mak
echo "MAKE=$make" >> $config_host_mak
echo "PYTHON=$python" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
echo "MESON=$meson" >> $config_host_mak
echo "NINJA=$ninja" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
echo "HOST_CC=$host_cc" >> $config_host_mak
echo "AR=$ar" >> $config_host_mak
echo "AS=$as" >> $config_host_mak
echo "CCAS=$ccas" >> $config_host_mak
echo "CPP=$cpp" >> $config_host_mak
echo "OBJCOPY=$objcopy" >> $config_host_mak
echo "LD=$ld" >> $config_host_mak
echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak
echo "GLIB_LIBS=$glib_libs" >> $config_host_mak
echo "GLIB_VERSION=$(pkg-config --modversion glib-2.0)" >> $config_host_mak
echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak
echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak
echo "STRIP=$strip" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
# use included Linux headers
if test "$linux" = "yes" ; then
mkdir -p linux-headers
case "$cpu" in
i386|x86_64)
linux_arch=x86
;;
ppc|ppc64)
linux_arch=powerpc
;;
s390x)
linux_arch=s390
;;
aarch64)
linux_arch=arm64
;;
loongarch*)
linux_arch=loongarch
;;
mips64)
linux_arch=mips
;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
;;
esac
# For non-KVM architectures we will not have asm headers
if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm
fi
fi
for target in $target_list; do
target_dir="$target"
target_name=$(echo $target | cut -d '-' -f 1)$EXESUF
mkdir -p $target_dir
case $target in
*-user) symlink "../qemu-$target_name" "$target_dir/qemu-$target_name" ;;
*) symlink "../qemu-system-$target_name" "$target_dir/qemu-system-$target_name" ;;
esac
done
echo "CONFIG_QEMU_INTERP_PREFIX=$interp_prefix" | sed 's/%M/@0@/' >> $config_host_mak
if test "$default_targets" = "yes"; then
echo "CONFIG_DEFAULT_TARGETS=y" >> $config_host_mak
fi
if test "$ccache_cpp2" = "yes"; then
echo "export CCACHE_CPP2=y" >> $config_host_mak
fi
if test "$safe_stack" = "yes"; then
echo "CONFIG_SAFESTACK=y" >> $config_host_mak
fi
# If we're using a separate build tree, set it up now.
# LINKS are things to symlink back into the source tree
# (these can be both files and directories).
# Caution: do not add files or directories here using wildcards. This
# will result in problems later if a new file matching the wildcard is
# added to the source tree -- nothing will cause configure to be rerun
# so the build tree will be missing the link back to the new file, and
# tests might fail. Prefer to keep the relevant files in their own
# directory and symlink the directory instead.
LINKS="Makefile"
LINKS="$LINKS tests/tcg/Makefile.target"
LINKS="$LINKS pc-bios/optionrom/Makefile"
LINKS="$LINKS pc-bios/s390-ccw/Makefile"
LINKS="$LINKS roms/seabios/Makefile"
LINKS="$LINKS pc-bios/qemu-icon.bmp"
LINKS="$LINKS .gdbinit scripts" # scripts needed by relative path in .gdbinit
LINKS="$LINKS tests/avocado tests/data"
LINKS="$LINKS tests/qemu-iotests/check"
LINKS="$LINKS python"
LINKS="$LINKS contrib/plugins/Makefile "
for bios_file in \
$source_path/pc-bios/*.bin \
$source_path/pc-bios/*.elf \
$source_path/pc-bios/*.lid \
$source_path/pc-bios/*.rom \
$source_path/pc-bios/*.dtb \
$source_path/pc-bios/*.img \
$source_path/pc-bios/openbios-* \
$source_path/pc-bios/u-boot.* \
$source_path/pc-bios/palcode-* \
$source_path/pc-bios/qemu_vga.ndrv
do
LINKS="$LINKS pc-bios/$(basename $bios_file)"
done
for f in $LINKS ; do
if [ -e "$source_path/$f" ]; then
mkdir -p `dirname ./$f`
symlink "$source_path/$f" "$f"
fi
done
(for i in $cross_cc_vars; do
export $i
done
export target_list source_path use_containers cpu
$source_path/tests/tcg/configure.sh)
# temporary config to build submodules
if test -f $source_path/roms/seabios/Makefile; then
for rom in seabios; do
config_mak=roms/$rom/config.mak
echo "# Automatically generated by configure - do not modify" > $config_mak
echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
echo "AS=$as" >> $config_mak
echo "CCAS=$ccas" >> $config_mak
echo "CC=$cc" >> $config_mak
echo "BCC=bcc" >> $config_mak
echo "CPP=$cpp" >> $config_mak
echo "OBJCOPY=objcopy" >> $config_mak
echo "IASL=$iasl" >> $config_mak
echo "LD=$ld" >> $config_mak
echo "RANLIB=$ranlib" >> $config_mak
done
fi
config_mak=pc-bios/optionrom/config.mak
echo "# Automatically generated by configure - do not modify" > $config_mak
echo "TOPSRC_DIR=$source_path" >> $config_mak
if test "$skip_meson" = no; then
cross="config-meson.cross.new"
meson_quote() {
test $# = 0 && return
echo "'$(echo $* | sed "s/ /','/g")'"
}
echo "# Automatically generated by configure - do not modify" > $cross
echo "[properties]" >> $cross
# unroll any custom device configs
for a in $device_archs; do
eval "c=\$devices_${a}"
echo "${a}-softmmu = '$c'" >> $cross
done
test -z "$cxx" && echo "link_language = 'c'" >> $cross
echo "[built-in options]" >> $cross
echo "c_args = [$(meson_quote $CFLAGS $EXTRA_CFLAGS)]" >> $cross
echo "cpp_args = [$(meson_quote $CXXFLAGS $EXTRA_CXXFLAGS)]" >> $cross
echo "c_link_args = [$(meson_quote $CFLAGS $LDFLAGS $EXTRA_CFLAGS $EXTRA_LDFLAGS)]" >> $cross
echo "cpp_link_args = [$(meson_quote $CXXFLAGS $LDFLAGS $EXTRA_CXXFLAGS $EXTRA_LDFLAGS)]" >> $cross
echo "[binaries]" >> $cross
echo "c = [$(meson_quote $cc $CPU_CFLAGS)]" >> $cross
test -n "$cxx" && echo "cpp = [$(meson_quote $cxx $CPU_CFLAGS)]" >> $cross
test -n "$objcc" && echo "objc = [$(meson_quote $objcc $CPU_CFLAGS)]" >> $cross
echo "ar = [$(meson_quote $ar)]" >> $cross
echo "nm = [$(meson_quote $nm)]" >> $cross
echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross
echo "ranlib = [$(meson_quote $ranlib)]" >> $cross
if has $sdl2_config; then
echo "sdl2-config = [$(meson_quote $sdl2_config)]" >> $cross
fi
echo "strip = [$(meson_quote $strip)]" >> $cross
echo "windres = [$(meson_quote $windres)]" >> $cross
if test "$cross_compile" = "yes"; then
cross_arg="--cross-file config-meson.cross"
echo "[host_machine]" >> $cross
echo "system = '$targetos'" >> $cross
case "$cpu" in
i386)
echo "cpu_family = 'x86'" >> $cross
;;
*)
echo "cpu_family = '$cpu'" >> $cross
;;
esac
echo "cpu = '$cpu'" >> $cross
if test "$bigendian" = "yes" ; then
echo "endian = 'big'" >> $cross
else
echo "endian = 'little'" >> $cross
fi
else
cross_arg="--native-file config-meson.cross"
fi
mv $cross config-meson.cross
rm -rf meson-private meson-info meson-logs
run_meson() {
NINJA=$ninja $meson setup \
--prefix "$prefix" \
--libdir "$libdir" \
--libexecdir "$libexecdir" \
--bindir "$bindir" \
--includedir "$includedir" \
--datadir "$datadir" \
--mandir "$mandir" \
--sysconfdir "$sysconfdir" \
--localedir "$localedir" \
--localstatedir "$local_statedir" \
-Daudio_drv_list=$audio_drv_list \
-Ddefault_devices=$default_devices \
-Ddocdir="$docdir" \
-Diasl="$($iasl -h >/dev/null 2>&1 && printf %s "$iasl")" \
-Dqemu_firmwarepath="$firmwarepath" \
-Dqemu_suffix="$qemu_suffix" \
-Dsmbd="$smbd" \
-Dsphinx_build="$sphinx_build" \
-Dtrace_file="$trace_file" \
-Doptimization=$(if test "$debug" = yes; then echo 0; else echo 2; fi) \
-Ddebug=$(if test "$debug_info" = yes; then echo true; else echo false; fi) \
-Dwerror=$(if test "$werror" = yes; then echo true; else echo false; fi) \
-Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \
-Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
-Db_lto=$lto -Dcfi=$cfi -Dtcg=$tcg -Dxen=$xen \
-Dcapstone=$capstone -Dfdt=$fdt -Dslirp=$slirp \
$(test -n "${LIB_FUZZING_ENGINE+xxx}" && echo "-Dfuzzing_engine=$LIB_FUZZING_ENGINE") \
$(if test "$default_feature" = no; then echo "-Dauto_features=disabled"; fi) \
"$@" $cross_arg "$PWD" "$source_path"
}
eval run_meson $meson_options
if test "$?" -ne 0 ; then
error_exit "meson setup failed"
fi
else
if test -f meson-private/cmd_line.txt; then
# Adjust old command line options whose type was changed
# Avoids having to use "setup --wipe" when Meson is upgraded
perl -i -ne '
s/^gettext = true$/gettext = auto/;
s/^gettext = false$/gettext = disabled/;
/^b_staticpic/ && next;
print;' meson-private/cmd_line.txt
fi
fi
# Save the configure command line for later reuse.
cat <<EOD >config.status
#!/bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
EOD
preserve_env() {
envname=$1
eval envval=\$$envname
if test -n "$envval"
then
echo "$envname='$envval'" >> config.status
echo "export $envname" >> config.status
else
echo "unset $envname" >> config.status
fi
}
# Preserve various env variables that influence what
# features/build target configure will detect
preserve_env AR
preserve_env AS
preserve_env CC
preserve_env CPP
preserve_env CFLAGS
preserve_env CXX
preserve_env CXXFLAGS
preserve_env INSTALL
preserve_env LD
preserve_env LDFLAGS
preserve_env LD_LIBRARY_PATH
preserve_env LIBTOOL
preserve_env MAKE
preserve_env NM
preserve_env OBJCOPY
preserve_env PATH
preserve_env PKG_CONFIG
preserve_env PKG_CONFIG_LIBDIR
preserve_env PKG_CONFIG_PATH
preserve_env PYTHON
preserve_env SDL2_CONFIG
preserve_env SMBD
preserve_env STRIP
preserve_env WINDRES
printf "exec" >>config.status
for i in "$0" "$@"; do
test "$i" = --skip-meson || printf " %s" "$(quote_sh "$i")" >>config.status
done
echo ' "$@"' >>config.status
chmod +x config.status
rm -r "$TMPDIR1"