qemu-e2k/hw/arm/sabrelite.c

117 lines
3.7 KiB
C

/*
* SABRELITE Board System emulation.
*
* Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net>
*
* This code is licensed under the GPL, version 2 or later.
* See the file `COPYING' in the top level directory.
*
* It (partially) emulates a sabrelite board, with a Freescale
* i.MX6 SoC
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/arm/fsl-imx6.h"
#include "hw/boards.h"
#include "hw/qdev-properties.h"
#include "sysemu/sysemu.h"
#include "qemu/error-report.h"
#include "sysemu/qtest.h"
static struct arm_boot_info sabrelite_binfo = {
/* DDR memory start */
.loader_start = FSL_IMX6_MMDC_ADDR,
/* No board ID, we boot from DT tree */
.board_id = -1,
};
/* No need to do any particular setup for secondary boot */
static void sabrelite_write_secondary(ARMCPU *cpu,
const struct arm_boot_info *info)
{
}
/* Secondary cores are reset through SRC device */
static void sabrelite_reset_secondary(ARMCPU *cpu,
const struct arm_boot_info *info)
{
}
static void sabrelite_init(MachineState *machine)
{
FslIMX6State *s;
/* Check the amount of memory is compatible with the SOC */
if (machine->ram_size > FSL_IMX6_MMDC_SIZE) {
error_report("RAM size " RAM_ADDR_FMT " above max supported (%08x)",
machine->ram_size, FSL_IMX6_MMDC_SIZE);
exit(1);
}
s = FSL_IMX6(object_new(TYPE_FSL_IMX6));
object_property_add_child(OBJECT(machine), "soc", OBJECT(s));
/* Ethernet PHY address is 6 */
object_property_set_int(OBJECT(s), "fec-phy-num", 6, &error_fatal);
qdev_realize(DEVICE(s), NULL, &error_fatal);
memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR,
machine->ram);
{
/*
* TODO: Ideally we would expose the chip select and spi bus on the
* SoC object using alias properties; then we would not need to
* directly access the underlying spi device object.
*/
/* Add the sst25vf016b NOR FLASH memory to first SPI */
Object *spi_dev;
spi_dev = object_resolve_path_component(OBJECT(s), "spi1");
if (spi_dev) {
SSIBus *spi_bus;
spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(spi_dev), "spi");
if (spi_bus) {
DeviceState *flash_dev;
qemu_irq cs_line;
DriveInfo *dinfo = drive_get_next(IF_MTD);
flash_dev = qdev_new("sst25vf016b");
if (dinfo) {
qdev_prop_set_drive_err(flash_dev, "drive",
blk_by_legacy_dinfo(dinfo),
&error_fatal);
}
qdev_realize_and_unref(flash_dev, BUS(spi_bus), &error_fatal);
cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(SYS_BUS_DEVICE(spi_dev), 1, cs_line);
}
}
}
sabrelite_binfo.ram_size = machine->ram_size;
sabrelite_binfo.nb_cpus = machine->smp.cpus;
sabrelite_binfo.secure_boot = true;
sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary;
sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;
if (!qtest_enabled()) {
arm_load_kernel(&s->cpu[0], machine, &sabrelite_binfo);
}
}
static void sabrelite_machine_init(MachineClass *mc)
{
mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)";
mc->init = sabrelite_init;
mc->max_cpus = FSL_IMX6_NUM_CPUS;
mc->ignore_memory_transaction_failures = true;
mc->default_ram_id = "sabrelite.ram";
}
DEFINE_MACHINE("sabrelite", sabrelite_machine_init)