OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
2115c01924
qemu-e2k/hw/tusb6010.c
Alexander Graf 2507c12ab0 Add endianness as io mem parameter 
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00

767 lines
23 KiB
C
Raw Blame History

/*
* Texas Instruments TUSB6010 emulation.
* Based on reverse-engineering of a linux driver.
*
* Copyright (C) 2008 Nokia Corporation
* Written by Andrzej Zaborowski <andrew@openedhand.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 or
* (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu-common.h"
#include "qemu-timer.h"
#include "usb.h"
#include "omap.h"
#include "irq.h"
#include "devices.h"
struct TUSBState {
int iomemtype[2];
qemu_irq irq;
MUSBState *musb;
QEMUTimer *otg_timer;
QEMUTimer *pwr_timer;
int power;
uint32_t scratch;
uint16_t test_reset;
uint32_t prcm_config;
uint32_t prcm_mngmt;
uint16_t otg_status;
uint32_t dev_config;
int host_mode;
uint32_t intr;
uint32_t intr_ok;
uint32_t mask;
uint32_t usbip_intr;
uint32_t usbip_mask;
uint32_t gpio_intr;
uint32_t gpio_mask;
uint32_t gpio_config;
uint32_t dma_intr;
uint32_t dma_mask;
uint32_t dma_map;
uint32_t dma_config;
uint32_t ep0_config;
uint32_t rx_config[15];
uint32_t tx_config[15];
uint32_t wkup_mask;
uint32_t pullup[2];
uint32_t control_config;
uint32_t otg_timer_val;
};
#define TUSB_DEVCLOCK 60000000 /* 60 MHz */
#define TUSB_VLYNQ_CTRL 0x004
/* Mentor Graphics OTG core registers. */
#define TUSB_BASE_OFFSET 0x400
/* FIFO registers, 32-bit. */
#define TUSB_FIFO_BASE 0x600
/* Device System & Control registers, 32-bit. */
#define TUSB_SYS_REG_BASE 0x800
#define TUSB_DEV_CONF (TUSB_SYS_REG_BASE + 0x000)
#define TUSB_DEV_CONF_USB_HOST_MODE (1 << 16)
#define TUSB_DEV_CONF_PROD_TEST_MODE (1 << 15)
#define TUSB_DEV_CONF_SOFT_ID (1 << 1)
#define TUSB_DEV_CONF_ID_SEL (1 << 0)
#define TUSB_PHY_OTG_CTRL_ENABLE (TUSB_SYS_REG_BASE + 0x004)
#define TUSB_PHY_OTG_CTRL (TUSB_SYS_REG_BASE + 0x008)
#define TUSB_PHY_OTG_CTRL_WRPROTECT (0xa5 << 24)
#define TUSB_PHY_OTG_CTRL_O_ID_PULLUP (1 << 23)
#define TUSB_PHY_OTG_CTRL_O_VBUS_DET_EN (1 << 19)
#define TUSB_PHY_OTG_CTRL_O_SESS_END_EN (1 << 18)
#define TUSB_PHY_OTG_CTRL_TESTM2 (1 << 17)
#define TUSB_PHY_OTG_CTRL_TESTM1 (1 << 16)
#define TUSB_PHY_OTG_CTRL_TESTM0 (1 << 15)
#define TUSB_PHY_OTG_CTRL_TX_DATA2 (1 << 14)
#define TUSB_PHY_OTG_CTRL_TX_GZ2 (1 << 13)
#define TUSB_PHY_OTG_CTRL_TX_ENABLE2 (1 << 12)
#define TUSB_PHY_OTG_CTRL_DM_PULLDOWN (1 << 11)
#define TUSB_PHY_OTG_CTRL_DP_PULLDOWN (1 << 10)
#define TUSB_PHY_OTG_CTRL_OSC_EN (1 << 9)
#define TUSB_PHY_OTG_CTRL_PHYREF_CLK(v) (((v) & 3) << 7)
#define TUSB_PHY_OTG_CTRL_PD (1 << 6)
#define TUSB_PHY_OTG_CTRL_PLL_ON (1 << 5)
#define TUSB_PHY_OTG_CTRL_EXT_RPU (1 << 4)
#define TUSB_PHY_OTG_CTRL_PWR_GOOD (1 << 3)
#define TUSB_PHY_OTG_CTRL_RESET (1 << 2)
#define TUSB_PHY_OTG_CTRL_SUSPENDM (1 << 1)
#define TUSB_PHY_OTG_CTRL_CLK_MODE (1 << 0)
/* OTG status register */
#define TUSB_DEV_OTG_STAT (TUSB_SYS_REG_BASE + 0x00c)
#define TUSB_DEV_OTG_STAT_PWR_CLK_GOOD (1 << 8)
#define TUSB_DEV_OTG_STAT_SESS_END (1 << 7)
#define TUSB_DEV_OTG_STAT_SESS_VALID (1 << 6)
#define TUSB_DEV_OTG_STAT_VBUS_VALID (1 << 5)
#define TUSB_DEV_OTG_STAT_VBUS_SENSE (1 << 4)
#define TUSB_DEV_OTG_STAT_ID_STATUS (1 << 3)
#define TUSB_DEV_OTG_STAT_HOST_DISCON (1 << 2)
#define TUSB_DEV_OTG_STAT_LINE_STATE (3 << 0)
#define TUSB_DEV_OTG_STAT_DP_ENABLE (1 << 1)
#define TUSB_DEV_OTG_STAT_DM_ENABLE (1 << 0)
#define TUSB_DEV_OTG_TIMER (TUSB_SYS_REG_BASE + 0x010)
#define TUSB_DEV_OTG_TIMER_ENABLE (1 << 31)
#define TUSB_DEV_OTG_TIMER_VAL(v) ((v) & 0x07ffffff)
#define TUSB_PRCM_REV (TUSB_SYS_REG_BASE + 0x014)
/* PRCM configuration register */
#define TUSB_PRCM_CONF (TUSB_SYS_REG_BASE + 0x018)
#define TUSB_PRCM_CONF_SFW_CPEN (1 << 24)
#define TUSB_PRCM_CONF_SYS_CLKSEL(v) (((v) & 3) << 16)
/* PRCM management register */
#define TUSB_PRCM_MNGMT (TUSB_SYS_REG_BASE + 0x01c)
#define TUSB_PRCM_MNGMT_SRP_FIX_TMR(v) (((v) & 0xf) << 25)
#define TUSB_PRCM_MNGMT_SRP_FIX_EN (1 << 24)
#define TUSB_PRCM_MNGMT_VBUS_VAL_TMR(v) (((v) & 0xf) << 20)
#define TUSB_PRCM_MNGMT_VBUS_VAL_FLT_EN (1 << 19)
#define TUSB_PRCM_MNGMT_DFT_CLK_DIS (1 << 18)
#define TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS (1 << 17)
#define TUSB_PRCM_MNGMT_OTG_SESS_END_EN (1 << 10)
#define TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN (1 << 9)
#define TUSB_PRCM_MNGMT_OTG_ID_PULLUP (1 << 8)
#define TUSB_PRCM_MNGMT_15_SW_EN (1 << 4)
#define TUSB_PRCM_MNGMT_33_SW_EN (1 << 3)
#define TUSB_PRCM_MNGMT_5V_CPEN (1 << 2)
#define TUSB_PRCM_MNGMT_PM_IDLE (1 << 1)
#define TUSB_PRCM_MNGMT_DEV_IDLE (1 << 0)
/* Wake-up source clear and mask registers */
#define TUSB_PRCM_WAKEUP_SOURCE (TUSB_SYS_REG_BASE + 0x020)
#define TUSB_PRCM_WAKEUP_CLEAR (TUSB_SYS_REG_BASE + 0x028)
#define TUSB_PRCM_WAKEUP_MASK (TUSB_SYS_REG_BASE + 0x02c)
#define TUSB_PRCM_WAKEUP_RESERVED_BITS (0xffffe << 13)
#define TUSB_PRCM_WGPIO_7 (1 << 12)
#define TUSB_PRCM_WGPIO_6 (1 << 11)
#define TUSB_PRCM_WGPIO_5 (1 << 10)
#define TUSB_PRCM_WGPIO_4 (1 << 9)
#define TUSB_PRCM_WGPIO_3 (1 << 8)
#define TUSB_PRCM_WGPIO_2 (1 << 7)
#define TUSB_PRCM_WGPIO_1 (1 << 6)
#define TUSB_PRCM_WGPIO_0 (1 << 5)
#define TUSB_PRCM_WHOSTDISCON (1 << 4) /* Host disconnect */
#define TUSB_PRCM_WBUS (1 << 3) /* USB bus resume */
#define TUSB_PRCM_WNORCS (1 << 2) /* NOR chip select */
#define TUSB_PRCM_WVBUS (1 << 1) /* OTG PHY VBUS */
#define TUSB_PRCM_WID (1 << 0) /* OTG PHY ID detect */
#define TUSB_PULLUP_1_CTRL (TUSB_SYS_REG_BASE + 0x030)
#define TUSB_PULLUP_2_CTRL (TUSB_SYS_REG_BASE + 0x034)
#define TUSB_INT_CTRL_REV (TUSB_SYS_REG_BASE + 0x038)
#define TUSB_INT_CTRL_CONF (TUSB_SYS_REG_BASE + 0x03c)
#define TUSB_USBIP_INT_SRC (TUSB_SYS_REG_BASE + 0x040)
#define TUSB_USBIP_INT_SET (TUSB_SYS_REG_BASE + 0x044)
#define TUSB_USBIP_INT_CLEAR (TUSB_SYS_REG_BASE + 0x048)
#define TUSB_USBIP_INT_MASK (TUSB_SYS_REG_BASE + 0x04c)
#define TUSB_DMA_INT_SRC (TUSB_SYS_REG_BASE + 0x050)
#define TUSB_DMA_INT_SET (TUSB_SYS_REG_BASE + 0x054)
#define TUSB_DMA_INT_CLEAR (TUSB_SYS_REG_BASE + 0x058)
#define TUSB_DMA_INT_MASK (TUSB_SYS_REG_BASE + 0x05c)
#define TUSB_GPIO_INT_SRC (TUSB_SYS_REG_BASE + 0x060)
#define TUSB_GPIO_INT_SET (TUSB_SYS_REG_BASE + 0x064)
#define TUSB_GPIO_INT_CLEAR (TUSB_SYS_REG_BASE + 0x068)
#define TUSB_GPIO_INT_MASK (TUSB_SYS_REG_BASE + 0x06c)
/* NOR flash interrupt source registers */
#define TUSB_INT_SRC (TUSB_SYS_REG_BASE + 0x070)
#define TUSB_INT_SRC_SET (TUSB_SYS_REG_BASE + 0x074)
#define TUSB_INT_SRC_CLEAR (TUSB_SYS_REG_BASE + 0x078)
#define TUSB_INT_MASK (TUSB_SYS_REG_BASE + 0x07c)
#define TUSB_INT_SRC_TXRX_DMA_DONE (1 << 24)
#define TUSB_INT_SRC_USB_IP_CORE (1 << 17)
#define TUSB_INT_SRC_OTG_TIMEOUT (1 << 16)
#define TUSB_INT_SRC_VBUS_SENSE_CHNG (1 << 15)
#define TUSB_INT_SRC_ID_STATUS_CHNG (1 << 14)
#define TUSB_INT_SRC_DEV_WAKEUP (1 << 13)
#define TUSB_INT_SRC_DEV_READY (1 << 12)
#define TUSB_INT_SRC_USB_IP_TX (1 << 9)
#define TUSB_INT_SRC_USB_IP_RX (1 << 8)
#define TUSB_INT_SRC_USB_IP_VBUS_ERR (1 << 7)
#define TUSB_INT_SRC_USB_IP_VBUS_REQ (1 << 6)
#define TUSB_INT_SRC_USB_IP_DISCON (1 << 5)
#define TUSB_INT_SRC_USB_IP_CONN (1 << 4)
#define TUSB_INT_SRC_USB_IP_SOF (1 << 3)
#define TUSB_INT_SRC_USB_IP_RST_BABBLE (1 << 2)
#define TUSB_INT_SRC_USB_IP_RESUME (1 << 1)
#define TUSB_INT_SRC_USB_IP_SUSPEND (1 << 0)
#define TUSB_GPIO_REV (TUSB_SYS_REG_BASE + 0x080)
#define TUSB_GPIO_CONF (TUSB_SYS_REG_BASE + 0x084)
#define TUSB_DMA_CTRL_REV (TUSB_SYS_REG_BASE + 0x100)
#define TUSB_DMA_REQ_CONF (TUSB_SYS_REG_BASE + 0x104)
#define TUSB_EP0_CONF (TUSB_SYS_REG_BASE + 0x108)
#define TUSB_EP_IN_SIZE (TUSB_SYS_REG_BASE + 0x10c)
#define TUSB_DMA_EP_MAP (TUSB_SYS_REG_BASE + 0x148)
#define TUSB_EP_OUT_SIZE (TUSB_SYS_REG_BASE + 0x14c)
#define TUSB_EP_MAX_PACKET_SIZE_OFFSET (TUSB_SYS_REG_BASE + 0x188)
#define TUSB_SCRATCH_PAD (TUSB_SYS_REG_BASE + 0x1c4)
#define TUSB_WAIT_COUNT (TUSB_SYS_REG_BASE + 0x1c8)
#define TUSB_PROD_TEST_RESET (TUSB_SYS_REG_BASE + 0x1d8)
#define TUSB_DIDR1_LO (TUSB_SYS_REG_BASE + 0x1f8)
#define TUSB_DIDR1_HI (TUSB_SYS_REG_BASE + 0x1fc)
/* Device System & Control register bitfields */
#define TUSB_INT_CTRL_CONF_INT_RLCYC(v) (((v) & 0x7) << 18)
#define TUSB_INT_CTRL_CONF_INT_POLARITY (1 << 17)
#define TUSB_INT_CTRL_CONF_INT_MODE (1 << 16)
#define TUSB_GPIO_CONF_DMAREQ(v) (((v) & 0x3f) << 24)
#define TUSB_DMA_REQ_CONF_BURST_SIZE(v) (((v) & 3) << 26)
#define TUSB_DMA_REQ_CONF_DMA_RQ_EN(v) (((v) & 0x3f) << 20)
#define TUSB_DMA_REQ_CONF_DMA_RQ_ASR(v) (((v) & 0xf) << 16)
#define TUSB_EP0_CONFIG_SW_EN (1 << 8)
#define TUSB_EP0_CONFIG_DIR_TX (1 << 7)
#define TUSB_EP0_CONFIG_XFR_SIZE(v) ((v) & 0x7f)
#define TUSB_EP_CONFIG_SW_EN (1 << 31)
#define TUSB_EP_CONFIG_XFR_SIZE(v) ((v) & 0x7fffffff)
#define TUSB_PROD_TEST_RESET_VAL 0xa596
int tusb6010_sync_io(TUSBState *s)
{
return s->iomemtype[0];
}
int tusb6010_async_io(TUSBState *s)
{
return s->iomemtype[1];
}
static void tusb_intr_update(TUSBState *s)
{
if (s->control_config & TUSB_INT_CTRL_CONF_INT_POLARITY)
qemu_set_irq(s->irq, s->intr & ~s->mask & s->intr_ok);
else
qemu_set_irq(s->irq, (!(s->intr & ~s->mask)) & s->intr_ok);
}
static void tusb_usbip_intr_update(TUSBState *s)
{
/* TX interrupt in the MUSB */
if (s->usbip_intr & 0x0000ffff & ~s->usbip_mask)
s->intr |= TUSB_INT_SRC_USB_IP_TX;
else
s->intr &= ~TUSB_INT_SRC_USB_IP_TX;
/* RX interrupt in the MUSB */
if (s->usbip_intr & 0xffff0000 & ~s->usbip_mask)
s->intr |= TUSB_INT_SRC_USB_IP_RX;
else
s->intr &= ~TUSB_INT_SRC_USB_IP_RX;
/* XXX: What about TUSB_INT_SRC_USB_IP_CORE? */
tusb_intr_update(s);
}
static void tusb_dma_intr_update(TUSBState *s)
{
if (s->dma_intr & ~s->dma_mask)
s->intr |= TUSB_INT_SRC_TXRX_DMA_DONE;
else
s->intr &= ~TUSB_INT_SRC_TXRX_DMA_DONE;
tusb_intr_update(s);
}
static void tusb_gpio_intr_update(TUSBState *s)
{
/* TODO: How is this signalled? */
}
extern CPUReadMemoryFunc * const musb_read[];
extern CPUWriteMemoryFunc * const musb_write[];
static uint32_t tusb_async_readb(void *opaque, target_phys_addr_t addr)
{
TUSBState *s = (TUSBState *) opaque;
switch (addr & 0xfff) {
case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
return musb_read[0](s->musb, addr & 0x1ff);
case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
return musb_read[0](s->musb, 0x20 + ((addr >> 3) & 0x3c));
}
printf("%s: unknown register at %03x\n",
__FUNCTION__, (int) (addr & 0xfff));
return 0;
}
static uint32_t tusb_async_readh(void *opaque, target_phys_addr_t addr)
{
TUSBState *s = (TUSBState *) opaque;
switch (addr & 0xfff) {
case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
return musb_read[1](s->musb, addr & 0x1ff);
case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
return musb_read[1](s->musb, 0x20 + ((addr >> 3) & 0x3c));
}
printf("%s: unknown register at %03x\n",
__FUNCTION__, (int) (addr & 0xfff));
return 0;
}
static uint32_t tusb_async_readw(void *opaque, target_phys_addr_t addr)
{
TUSBState *s = (TUSBState *) opaque;
int offset = addr & 0xfff;
int epnum;
uint32_t ret;
switch (offset) {
case TUSB_DEV_CONF:
return s->dev_config;
case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
return musb_read[2](s->musb, offset & 0x1ff);
case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
return musb_read[2](s->musb, 0x20 + ((addr >> 3) & 0x3c));
case TUSB_PHY_OTG_CTRL_ENABLE:
case TUSB_PHY_OTG_CTRL:
return 0x00; /* TODO */
case TUSB_DEV_OTG_STAT:
ret = s->otg_status;
#if 0
if (!(s->prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN))
ret &= ~TUSB_DEV_OTG_STAT_VBUS_VALID;
#endif
return ret;
case TUSB_DEV_OTG_TIMER:
return s->otg_timer_val;
case TUSB_PRCM_REV:
return 0x20;
case TUSB_PRCM_CONF:
return s->prcm_config;
case TUSB_PRCM_MNGMT:
return s->prcm_mngmt;
case TUSB_PRCM_WAKEUP_SOURCE:
case TUSB_PRCM_WAKEUP_CLEAR: /* TODO: What does this one return? */
return 0x00000000;
case TUSB_PRCM_WAKEUP_MASK:
return s->wkup_mask;
case TUSB_PULLUP_1_CTRL:
return s->pullup[0];
case TUSB_PULLUP_2_CTRL:
return s->pullup[1];
case TUSB_INT_CTRL_REV:
return 0x20;
case TUSB_INT_CTRL_CONF:
return s->control_config;
case TUSB_USBIP_INT_SRC:
case TUSB_USBIP_INT_SET: /* TODO: What do these two return? */
case TUSB_USBIP_INT_CLEAR:
return s->usbip_intr;
case TUSB_USBIP_INT_MASK:
return s->usbip_mask;
case TUSB_DMA_INT_SRC:
case TUSB_DMA_INT_SET: /* TODO: What do these two return? */
case TUSB_DMA_INT_CLEAR:
return s->dma_intr;
case TUSB_DMA_INT_MASK:
return s->dma_mask;
case TUSB_GPIO_INT_SRC: /* TODO: What do these two return? */
case TUSB_GPIO_INT_SET:
case TUSB_GPIO_INT_CLEAR:
return s->gpio_intr;
case TUSB_GPIO_INT_MASK:
return s->gpio_mask;
case TUSB_INT_SRC:
case TUSB_INT_SRC_SET: /* TODO: What do these two return? */
case TUSB_INT_SRC_CLEAR:
return s->intr;
case TUSB_INT_MASK:
return s->mask;
case TUSB_GPIO_REV:
return 0x30;
case TUSB_GPIO_CONF:
return s->gpio_config;
case TUSB_DMA_CTRL_REV:
return 0x30;
case TUSB_DMA_REQ_CONF:
return s->dma_config;
case TUSB_EP0_CONF:
return s->ep0_config;
case TUSB_EP_IN_SIZE ... (TUSB_EP_IN_SIZE + 0x3b):
epnum = (offset - TUSB_EP_IN_SIZE) >> 2;
return s->tx_config[epnum];
case TUSB_DMA_EP_MAP:
return s->dma_map;
case TUSB_EP_OUT_SIZE ... (TUSB_EP_OUT_SIZE + 0x3b):
epnum = (offset - TUSB_EP_OUT_SIZE) >> 2;
return s->rx_config[epnum];
case TUSB_EP_MAX_PACKET_SIZE_OFFSET ...
(TUSB_EP_MAX_PACKET_SIZE_OFFSET + 0x3b):
return 0x00000000; /* TODO */
case TUSB_WAIT_COUNT:
return 0x00; /* TODO */
case TUSB_SCRATCH_PAD:
return s->scratch;
case TUSB_PROD_TEST_RESET:
return s->test_reset;
/* DIE IDs */
case TUSB_DIDR1_LO:
return 0xa9453c59;
case TUSB_DIDR1_HI:
return 0x54059adf;
}
printf("%s: unknown register at %03x\n", __FUNCTION__, offset);
return 0;
}
static void tusb_async_writeb(void *opaque, target_phys_addr_t addr,
uint32_t value)
{
TUSBState *s = (TUSBState *) opaque;
switch (addr & 0xfff) {
case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
musb_write[0](s->musb, addr & 0x1ff, value);
break;
case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
musb_write[0](s->musb, 0x20 + ((addr >> 3) & 0x3c), value);
break;
default:
printf("%s: unknown register at %03x\n",
__FUNCTION__, (int) (addr & 0xfff));
return;
}
}
static void tusb_async_writeh(void *opaque, target_phys_addr_t addr,
uint32_t value)
{
TUSBState *s = (TUSBState *) opaque;
switch (addr & 0xfff) {
case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
musb_write[1](s->musb, addr & 0x1ff, value);
break;
case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
musb_write[1](s->musb, 0x20 + ((addr >> 3) & 0x3c), value);
break;
default:
printf("%s: unknown register at %03x\n",
__FUNCTION__, (int) (addr & 0xfff));
return;
}
}
static void tusb_async_writew(void *opaque, target_phys_addr_t addr,
uint32_t value)
{
TUSBState *s = (TUSBState *) opaque;
int offset = addr & 0xfff;
int epnum;
switch (offset) {
case TUSB_VLYNQ_CTRL:
break;
case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
musb_write[2](s->musb, offset & 0x1ff, value);
break;
case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
musb_write[2](s->musb, 0x20 + ((addr >> 3) & 0x3c), value);
break;
case TUSB_DEV_CONF:
s->dev_config = value;
s->host_mode = (value & TUSB_DEV_CONF_USB_HOST_MODE);
if (value & TUSB_DEV_CONF_PROD_TEST_MODE)
hw_error("%s: Product Test mode not allowed\n", __FUNCTION__);
break;
case TUSB_PHY_OTG_CTRL_ENABLE:
case TUSB_PHY_OTG_CTRL:
return; /* TODO */
case TUSB_DEV_OTG_TIMER:
s->otg_timer_val = value;
if (value & TUSB_DEV_OTG_TIMER_ENABLE)
qemu_mod_timer(s->otg_timer, qemu_get_clock(vm_clock) +
muldiv64(TUSB_DEV_OTG_TIMER_VAL(value),
get_ticks_per_sec(), TUSB_DEVCLOCK));
else
qemu_del_timer(s->otg_timer);
break;
case TUSB_PRCM_CONF:
s->prcm_config = value;
break;
case TUSB_PRCM_MNGMT:
s->prcm_mngmt = value;
break;
case TUSB_PRCM_WAKEUP_CLEAR:
break;
case TUSB_PRCM_WAKEUP_MASK:
s->wkup_mask = value;
break;
case TUSB_PULLUP_1_CTRL:
s->pullup[0] = value;
break;
case TUSB_PULLUP_2_CTRL:
s->pullup[1] = value;
break;
case TUSB_INT_CTRL_CONF:
s->control_config = value;
tusb_intr_update(s);
break;
case TUSB_USBIP_INT_SET:
s->usbip_intr |= value;
tusb_usbip_intr_update(s);
break;
case TUSB_USBIP_INT_CLEAR:
s->usbip_intr &= ~value;
tusb_usbip_intr_update(s);
musb_core_intr_clear(s->musb, ~value);
break;
case TUSB_USBIP_INT_MASK:
s->usbip_mask = value;
tusb_usbip_intr_update(s);
break;
case TUSB_DMA_INT_SET:
s->dma_intr |= value;
tusb_dma_intr_update(s);
break;
case TUSB_DMA_INT_CLEAR:
s->dma_intr &= ~value;
tusb_dma_intr_update(s);
break;
case TUSB_DMA_INT_MASK:
s->dma_mask = value;
tusb_dma_intr_update(s);
break;
case TUSB_GPIO_INT_SET:
s->gpio_intr |= value;
tusb_gpio_intr_update(s);
break;
case TUSB_GPIO_INT_CLEAR:
s->gpio_intr &= ~value;
tusb_gpio_intr_update(s);
break;
case TUSB_GPIO_INT_MASK:
s->gpio_mask = value;
tusb_gpio_intr_update(s);
break;
case TUSB_INT_SRC_SET:
s->intr |= value;
tusb_intr_update(s);
break;
case TUSB_INT_SRC_CLEAR:
s->intr &= ~value;
tusb_intr_update(s);
break;
case TUSB_INT_MASK:
s->mask = value;
tusb_intr_update(s);
break;
case TUSB_GPIO_CONF:
s->gpio_config = value;
break;
case TUSB_DMA_REQ_CONF:
s->dma_config = value;
break;
case TUSB_EP0_CONF:
s->ep0_config = value & 0x1ff;
musb_set_size(s->musb, 0, TUSB_EP0_CONFIG_XFR_SIZE(value),
value & TUSB_EP0_CONFIG_DIR_TX);
break;
case TUSB_EP_IN_SIZE ... (TUSB_EP_IN_SIZE + 0x3b):
epnum = (offset - TUSB_EP_IN_SIZE) >> 2;
s->tx_config[epnum] = value;
musb_set_size(s->musb, epnum + 1, TUSB_EP_CONFIG_XFR_SIZE(value), 1);
break;
case TUSB_DMA_EP_MAP:
s->dma_map = value;
break;
case TUSB_EP_OUT_SIZE ... (TUSB_EP_OUT_SIZE + 0x3b):
epnum = (offset - TUSB_EP_OUT_SIZE) >> 2;
s->rx_config[epnum] = value;
musb_set_size(s->musb, epnum + 1, TUSB_EP_CONFIG_XFR_SIZE(value), 0);
break;
case TUSB_EP_MAX_PACKET_SIZE_OFFSET ...
(TUSB_EP_MAX_PACKET_SIZE_OFFSET + 0x3b):
return; /* TODO */
case TUSB_WAIT_COUNT:
return; /* TODO */
case TUSB_SCRATCH_PAD:
s->scratch = value;
break;
case TUSB_PROD_TEST_RESET:
s->test_reset = value;
break;
default:
printf("%s: unknown register at %03x\n", __FUNCTION__, offset);
return;
}
}
static CPUReadMemoryFunc * const tusb_async_readfn[] = {
tusb_async_readb,
tusb_async_readh,
tusb_async_readw,
};
static CPUWriteMemoryFunc * const tusb_async_writefn[] = {
tusb_async_writeb,
tusb_async_writeh,
tusb_async_writew,
};
static void tusb_otg_tick(void *opaque)
{
TUSBState *s = (TUSBState *) opaque;
s->otg_timer_val = 0;
s->intr |= TUSB_INT_SRC_OTG_TIMEOUT;
tusb_intr_update(s);
}
static void tusb_power_tick(void *opaque)
{
TUSBState *s = (TUSBState *) opaque;
if (s->power) {
s->intr_ok = ~0;
tusb_intr_update(s);
}
}
static void tusb_musb_core_intr(void *opaque, int source, int level)
{
TUSBState *s = (TUSBState *) opaque;
uint16_t otg_status = s->otg_status;
switch (source) {
case musb_set_vbus:
if (level)
otg_status |= TUSB_DEV_OTG_STAT_VBUS_VALID;
else
otg_status &= ~TUSB_DEV_OTG_STAT_VBUS_VALID;
/* XXX: only if TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN set? */
/* XXX: only if TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN set? */
if (s->otg_status != otg_status) {
s->otg_status = otg_status;
s->intr |= TUSB_INT_SRC_VBUS_SENSE_CHNG;
tusb_intr_update(s);
}
break;
case musb_set_session:
/* XXX: only if TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN set? */
/* XXX: only if TUSB_PRCM_MNGMT_OTG_SESS_END_EN set? */
if (level) {
s->otg_status |= TUSB_DEV_OTG_STAT_SESS_VALID;
s->otg_status &= ~TUSB_DEV_OTG_STAT_SESS_END;
} else {
s->otg_status &= ~TUSB_DEV_OTG_STAT_SESS_VALID;
s->otg_status |= TUSB_DEV_OTG_STAT_SESS_END;
}
/* XXX: some IRQ or anything? */
break;
case musb_irq_tx:
case musb_irq_rx:
s->usbip_intr = musb_core_intr_get(s->musb);
/* Fall through. */
default:
if (level)
s->intr |= 1 << source;
else
s->intr &= ~(1 << source);
tusb_intr_update(s);
break;
}
}
TUSBState *tusb6010_init(qemu_irq intr)
{
TUSBState *s = qemu_mallocz(sizeof(*s));
s->test_reset = TUSB_PROD_TEST_RESET_VAL;
s->host_mode = 0;
s->dev_config = 0;
s->otg_status = 0; /* !TUSB_DEV_OTG_STAT_ID_STATUS means host mode */
s->power = 0;
s->mask = 0xffffffff;
s->intr = 0x00000000;
s->otg_timer_val = 0;
s->iomemtype[1] = cpu_register_io_memory(tusb_async_readfn,
tusb_async_writefn, s, DEVICE_NATIVE_ENDIAN);
s->irq = intr;
s->otg_timer = qemu_new_timer(vm_clock, tusb_otg_tick, s);
s->pwr_timer = qemu_new_timer(vm_clock, tusb_power_tick, s);
s->musb = musb_init(qemu_allocate_irqs(tusb_musb_core_intr, s,
__musb_irq_max));
return s;
}
void tusb6010_power(TUSBState *s, int on)
{
if (!on)
s->power = 0;
else if (!s->power && on) {
s->power = 1;
/* Pull the interrupt down after TUSB6010 comes up. */
s->intr_ok = 0;
tusb_intr_update(s);
qemu_mod_timer(s->pwr_timer,
qemu_get_clock(vm_clock) + get_ticks_per_sec() / 2);
}
}
Reference in New Issue View Git Blame Copy Permalink