OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
2450148920
qemu-e2k/Makefile.target
aliguori 2f9606b373 Add SASL authentication support ("Daniel P. Berrange") 
This patch adds the new SASL authentication protocol to the VNC server.

It is enabled by setting the 'sasl' flag when launching VNC. SASL can
optionally provide encryption via its SSF layer, if a suitable mechanism
is configured (eg, GSSAPI/Kerberos, or Digest-MD5).  If an SSF layer is
not available, then it should be combined with the x509 VNC authentication
protocol which provides encryption.

eg, if using GSSAPI

   qemu -vnc localhost:1,sasl

eg if using  TLS/x509 for encryption

   qemu -vnc localhost:1,sasl,tls,x509


By default the Cyrus SASL library will look for its configuration in
the file /etc/sasl2/qemu.conf.  For non-root users, this can be overridden
by setting the SASL_CONF_PATH environment variable, eg to make it look in
$HOME/.sasl2.  NB unprivileged users may not have access to the full range
of SASL mechanisms, since some of them require some administrative privileges
to configure. The patch includes an example SASL configuration file which
illustrates config for GSSAPI and Digest-MD5, though it should be noted that
the latter is not really considered secure any more.

Most of the SASL authentication code is located in a separate source file,
vnc-auth-sasl.c.  The main vnc.c file only contains minimal integration
glue, specifically parsing of command line flags / setup, and calls to
start the SASL auth process, to do encoding/decoding for data.

There are several possible stacks for reading & writing of data, depending
on the combo of VNC authentication methods in use

 - Clear.    read/write straight to socket
 - TLS.      read/write via GNUTLS helpers
 - SASL.     encode/decode via SASL SSF layer, then read/write to socket
 - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS

Hence, the vnc_client_read & vnc_client_write methods have been refactored
a little.

   vnc_client_read:  main entry point for reading, calls either

       - vnc_client_read_plain   reading, with no intermediate decoding
       - vnc_client_read_sasl    reading, with SASL SSF decoding

   These two methods, then call vnc_client_read_buf(). This decides
   whether to write to the socket directly or write via GNUTLS.

The situation is the same for writing data. More extensive comments
have been added in the code / patch. The vnc_client_read_sasl and
vnc_client_write_sasl method implementations live in the separate
vnc-auth-sasl.c file.

The state required for the SASL auth mechanism is kept in a separate
VncStateSASL struct, defined in vnc-auth-sasl.h and included in the
main VncState.

The configure script probes for SASL and automatically enables it
if found, unless --disable-vnc-sasl was given to override it.


 Makefile            |    7 
 Makefile.target     |    5 
 b/qemu.sasl         |   34 ++
 b/vnc-auth-sasl.c   |  626 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 b/vnc-auth-sasl.h   |   67 +++++
 configure           |   34 ++
 qemu-doc.texi       |   97 ++++++++
 vnc-auth-vencrypt.c |   12 
 vnc.c               |  249 ++++++++++++++++++--
 vnc.h               |   31 ++
 10 files changed, 1129 insertions(+), 33 deletions(-)

   Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 20:27:28 +00:00

758 lines
17 KiB
Makefile
Raw Blame History

include config.mak
include $(SRC_PATH)/rules.mak
TARGET_BASE_ARCH:=$(TARGET_ARCH)
ifeq ($(TARGET_ARCH), x86_64)
TARGET_BASE_ARCH:=i386
endif
ifeq ($(TARGET_ARCH), mipsn32)
TARGET_BASE_ARCH:=mips
endif
ifeq ($(TARGET_ARCH), mips64)
TARGET_BASE_ARCH:=mips
endif
ifeq ($(TARGET_ARCH), ppc64)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), ppc64h)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), ppcemb)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), sparc64)
TARGET_BASE_ARCH:=sparc
endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
CPPFLAGS=-I. -I.. -I$(TARGET_PATH) -I$(SRC_PATH) -MMD -MT $@ -MP -DNEED_CPU_H
#CFLAGS+=-Werror
LIBS=
# user emulator name
ifndef TARGET_ARCH2
TARGET_ARCH2=$(TARGET_ARCH)
endif
ifeq ($(TARGET_ARCH),arm)
ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=armeb
endif
endif
ifeq ($(TARGET_ARCH),sh4)
ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=sh4eb
endif
endif
ifeq ($(TARGET_ARCH),mips)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mipsel
endif
endif
ifeq ($(TARGET_ARCH),mipsn32)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mipsn32el
endif
endif
ifeq ($(TARGET_ARCH),mips64)
ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
TARGET_ARCH2=mips64el
endif
endif
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_ARCH2)
else
# system emulator name
ifeq ($(TARGET_ARCH), i386)
QEMU_PROG=qemu$(EXESUF)
else
QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
endif
endif
PROGS=$(QEMU_PROG)
# cc-option
# Usage: CFLAGS+=$(call cc-option, $(CFLAGS), -falign-functions=0, -malign-functions=0)
cc-option = $(shell if $(CC) $(1) $(2) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "$(2)"; else echo "$(3)"; fi ;)
HELPER_CFLAGS=
ifeq ($(ARCH),i386)
HELPER_CFLAGS+=-fomit-frame-pointer
endif
ifeq ($(ARCH),sparc)
CFLAGS+=-ffixed-g2 -ffixed-g3
ifneq ($(CONFIG_SOLARIS),yes)
CFLAGS+=-ffixed-g1 -ffixed-g6
HELPER_CFLAGS+=-ffixed-i0
endif
endif
ifeq ($(ARCH),sparc64)
ifneq ($(CONFIG_SOLARIS),yes)
CFLAGS+=-ffixed-g5 -ffixed-g6 -ffixed-g7
else
CFLAGS+=-ffixed-g1 -ffixed-g4 -ffixed-g5 -ffixed-g7
endif
endif
ifeq ($(ARCH),alpha)
# Ensure there's only a single GP
CFLAGS+=-msmall-data
endif
ifeq ($(ARCH),hppa)
BASE_LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ia64)
CFLAGS+=-mno-sdata
endif
CFLAGS+=$(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS+=$(OS_LDFLAGS) $(ARCH_LDFLAGS)
CPPFLAGS+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
LIBS+=-lm
ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
ifdef NEEDS_LIBSUNMATH
LIBS+=-lsunmath
LDFLAGS+=-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib
CFLAGS+=-I/opt/SUNWspro/prod/include/cc
endif
endif
kvm.o: CFLAGS+=$(KVM_CFLAGS)
kvm-all.o: CFLAGS+=$(KVM_CFLAGS)
all: $(PROGS)
#########################################################
# cpu emulator library
LIBOBJS=exec.o kqemu.o translate-all.o cpu-exec.o\
translate.o host-utils.o
# TCG code generator
LIBOBJS+= tcg/tcg.o tcg/tcg-runtime.o
CPPFLAGS+=-I$(SRC_PATH)/tcg -I$(SRC_PATH)/tcg/$(ARCH)
ifeq ($(ARCH),sparc64)
CPPFLAGS+=-I$(SRC_PATH)/tcg/sparc
endif
ifdef CONFIG_SOFTFLOAT
LIBOBJS+=fpu/softfloat.o
else
LIBOBJS+=fpu/softfloat-native.o
endif
CPPFLAGS+=-I$(SRC_PATH)/fpu
LIBOBJS+= op_helper.o helper.o
ifeq ($(TARGET_BASE_ARCH), arm)
LIBOBJS+= neon_helper.o iwmmxt_helper.o
endif
ifeq ($(TARGET_BASE_ARCH), alpha)
LIBOBJS+= alpha_palcode.o
endif
ifeq ($(TARGET_BASE_ARCH), cris)
LIBOBJS+= cris-dis.o
ifndef CONFIG_USER_ONLY
LIBOBJS+= mmu.o
endif
endif
# NOTE: the disassembler code is only needed for debugging
LIBOBJS+=disas.o
ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
USE_I386_DIS=y
endif
ifeq ($(findstring x86_64, $(TARGET_ARCH) $(ARCH)),x86_64)
USE_I386_DIS=y
endif
ifdef USE_I386_DIS
LIBOBJS+=i386-dis.o
endif
ifeq ($(findstring alpha, $(TARGET_ARCH) $(ARCH)),alpha)
LIBOBJS+=alpha-dis.o
endif
ifeq ($(findstring ppc, $(TARGET_BASE_ARCH) $(ARCH)),ppc)
LIBOBJS+=ppc-dis.o
endif
ifeq ($(findstring mips, $(TARGET_BASE_ARCH) $(ARCH)),mips)
LIBOBJS+=mips-dis.o
endif
ifeq ($(findstring sparc, $(TARGET_BASE_ARCH) $(ARCH)),sparc)
LIBOBJS+=sparc-dis.o
endif
ifeq ($(findstring arm, $(TARGET_ARCH) $(ARCH)),arm)
LIBOBJS+=arm-dis.o
endif
ifeq ($(findstring m68k, $(TARGET_ARCH) $(ARCH)),m68k)
LIBOBJS+=m68k-dis.o
endif
ifeq ($(findstring sh4, $(TARGET_ARCH) $(ARCH)),sh4)
LIBOBJS+=sh4-dis.o
endif
ifeq ($(findstring hppa, $(TARGET_BASE_ARCH) $(ARCH)),hppa)
LIBOBJS+=hppa-dis.o
endif
ifeq ($(findstring s390, $(TARGET_ARCH) $(ARCH)),s390)
LIBOBJS+=s390-dis.o
endif
# libqemu
libqemu.a: $(LIBOBJS)
translate.o: translate.c cpu.h
translate-all.o: translate-all.c cpu.h
tcg/tcg.o: cpu.h
# HELPER_CFLAGS is used for all the code compiled with static register
# variables
op_helper.o: CFLAGS += $(HELPER_CFLAGS) $(I386_CFLAGS)
cpu-exec.o: CFLAGS += $(HELPER_CFLAGS)
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
ifndef TARGET_ABI_DIR
TARGET_ABI_DIR=$(TARGET_ARCH)
endif
VPATH+=:$(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
CPPFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
ifeq ($(ARCH),i386)
ifdef TARGET_GPROF
USE_I386_LD=y
endif
ifdef CONFIG_STATIC
USE_I386_LD=y
endif
ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
# that the kernel ELF loader considers as an executable. I think this
# is the simplest way to make it self virtualizable!
LDFLAGS+=-Wl,-shared
endif
endif
ifeq ($(ARCH),x86_64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ppc)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ppc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),s390)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),sparc)
# -static is used to avoid g1/g3 usage by the dynamic linker
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld -static
endif
ifeq ($(ARCH),sparc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),alpha)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),arm)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),m68k)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),mips)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
ifeq ($(ARCH),mips64)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
# profiling code
ifdef TARGET_GPROF
LDFLAGS+=-p
CFLAGS+=-p
endif
OBJS= main.o syscall.o strace.o mmap.o signal.o path.o thunk.o \
elfload.o linuxload.o uaccess.o envlist.o
LIBS+= $(AIOLIBS)
ifdef TARGET_HAS_BFLT
OBJS+= flatload.o
endif
ifdef TARGET_HAS_ELFLOAD32
OBJS+= elfload32.o
elfload32.o: elfload.c
endif
ifeq ($(TARGET_ARCH), i386)
OBJS+= vm86.o
endif
ifeq ($(TARGET_ARCH), arm)
OBJS+=nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
nwfpe/double_cpdo.o nwfpe/extended_cpdo.o arm-semi.o
endif
ifeq ($(TARGET_ARCH), m68k)
OBJS+= m68k-sim.o m68k-semi.o
endif
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o gdbstub-xml.o
endif
OBJS+= libqemu.a
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: CFLAGS += $(HELPER_CFLAGS)
$(QEMU_PROG): $(OBJS) ../libqemu_user.a
$(LINK)
ifeq ($(ARCH),alpha)
# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
# the address space (31 bit so sign extending doesn't matter)
echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc
endif
endif #CONFIG_LINUX_USER
#########################################################
# Darwin user emulator target
ifdef CONFIG_DARWIN_USER
VPATH+=:$(SRC_PATH)/darwin-user
CPPFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)
# Leave some space for the regular program loading zone
LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000
LIBS+=-lmx
OBJS= main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o
OBJS+= libqemu.a
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o gdbstub-xml.o
endif
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: CFLAGS += $(HELPER_CFLAGS)
$(QEMU_PROG): $(OBJS)
$(LINK)
endif #CONFIG_DARWIN_USER
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
VPATH+=:$(SRC_PATH)/bsd-user
CPPFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
ifeq ($(ARCH),i386)
ifdef TARGET_GPROF
USE_I386_LD=y
endif
ifdef CONFIG_STATIC
USE_I386_LD=y
endif
ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
# that the kernel ELF loader considers as an executable. I think this
# is the simplest way to make it self virtualizable!
LDFLAGS+=-Wl,-shared
endif
endif
ifeq ($(ARCH),x86_64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ppc)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ppc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),s390)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),sparc)
# -static is used to avoid g1/g3 usage by the dynamic linker
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld -static
endif
ifeq ($(ARCH),sparc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),alpha)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),arm)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),m68k)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif
ifeq ($(ARCH),mips)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
ifeq ($(ARCH),mips64)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif
OBJS= main.o bsdload.o elfload.o mmap.o path.o signal.o strace.o syscall.o
OBJS+= uaccess.o
OBJS+= libqemu.a
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o
endif
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: CFLAGS += $(HELPER_CFLAGS)
$(QEMU_PROG): $(OBJS) ../libqemu_user.a
$(LINK)
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifndef CONFIG_USER_ONLY
OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o dma-helpers.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
OBJS+=virtio.o virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o
OBJS+=fw_cfg.o
ifdef CONFIG_KVM
OBJS+=kvm.o kvm-all.o
endif
ifdef CONFIG_WIN32
OBJS+=block-raw-win32.o
else
ifdef CONFIG_AIO
OBJS+=posix-aio-compat.o
endif
OBJS+=block-raw-posix.o
endif
LIBS+=-lz
ifdef CONFIG_ALSA
LIBS += -lasound
endif
ifdef CONFIG_ESD
LIBS += -lesd
endif
ifdef CONFIG_PA
LIBS += -lpulse-simple
endif
ifdef CONFIG_DSOUND
LIBS += -lole32 -ldxguid
endif
ifdef CONFIG_FMOD
LIBS += $(CONFIG_FMOD_LIB)
endif
ifdef CONFIG_OSS
LIBS += $(CONFIG_OSS_LIB)
endif
SOUND_HW = sb16.o es1370.o ac97.o
ifdef CONFIG_ADLIB
SOUND_HW += fmopl.o adlib.o
adlib.o fmopl.o: CFLAGS := ${CFLAGS} -DBUILD_Y8950=0
endif
ifdef CONFIG_GUS
SOUND_HW += gus.o gusemu_hal.o gusemu_mixer.o
endif
ifdef CONFIG_CS4231A
SOUND_HW += cs4231a.o
endif
ifdef CONFIG_VNC_TLS
CPPFLAGS += $(CONFIG_VNC_TLS_CFLAGS)
LIBS += $(CONFIG_VNC_TLS_LIBS)
endif
ifdef CONFIG_VNC_SASL
CPPFLAGS += $(CONFIG_VNC_SASL_CFLAGS)
LIBS += $(CONFIG_VNC_SASL_LIBS)
endif
ifdef CONFIG_BLUEZ
LIBS += $(CONFIG_BLUEZ_LIBS)
endif
# SCSI layer
OBJS+= lsi53c895a.o esp.o
# USB layer
OBJS+= usb-ohci.o
# EEPROM emulation
OBJS += eeprom93xx.o
# PCI network cards
OBJS += eepro100.o
OBJS += ne2000.o
OBJS += pcnet.o
OBJS += rtl8139.o
OBJS += e1000.o
# Serial mouse
OBJS += msmouse.o
ifeq ($(TARGET_BASE_ARCH), i386)
# Hardware support
OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o
OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
OBJS+= cirrus_vga.o apic.o parallel.o acpi.o piix_pci.o
OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o hpet.o
OBJS += device-hotplug.o pci-hotplug.o
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
endif
ifeq ($(TARGET_BASE_ARCH), ppc)
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
# shared objects
OBJS+= ppc.o ide.o vga.o $(SOUND_HW) dma.o openpic.o
# PREP target
OBJS+= pckbd.o ps2.o serial.o i8259.o i8254.o fdc.o m48t59.o mc146818rtc.o
OBJS+= prep_pci.o ppc_prep.o
# Mac shared devices
OBJS+= macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o escc.o
# OldWorld PowerMac
OBJS+= heathrow_pic.o grackle_pci.o ppc_oldworld.o
# NewWorld PowerMac
OBJS+= unin_pci.o ppc_newworld.o
# PowerPC 4xx boards
OBJS+= pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
OBJS+= ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
OBJS+= ppce500_pci.o ppce500_mpc8544ds.o
ifdef FDT_LIBS
OBJS+= device_tree.o
LIBS+= $(FDT_LIBS)
endif
ifdef CONFIG_KVM
OBJS+= kvm_ppc.o
endif
endif
ifeq ($(TARGET_BASE_ARCH), mips)
OBJS+= mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
OBJS+= mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o rc4030.o
OBJS+= g364fb.o jazz_led.o
OBJS+= ide.o gt64xxx.o pckbd.o ps2.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
OBJS+= piix_pci.o parallel.o cirrus_vga.o pcspk.o $(SOUND_HW)
OBJS+= mipsnet.o
OBJS+= pflash_cfi01.o
OBJS+= vmware_vga.o
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
endif
ifeq ($(TARGET_BASE_ARCH), cris)
# Boards
OBJS+= etraxfs.o axis_dev88.o
# IO blocks
OBJS+= etraxfs_dma.o
OBJS+= etraxfs_pic.o
OBJS+= etraxfs_eth.o
OBJS+= etraxfs_timer.o
OBJS+= etraxfs_ser.o
OBJS+= ptimer.o
OBJS+= pflash_cfi02.o nand.o
endif
ifeq ($(TARGET_BASE_ARCH), sparc)
ifeq ($(TARGET_ARCH), sparc64)
OBJS+= sun4u.o ide.o pckbd.o ps2.o vga.o apb_pci.o
OBJS+= fdc.o mc146818rtc.o serial.o m48t59.o
OBJS+= cirrus_vga.o parallel.o ptimer.o
else
OBJS+= sun4m.o tcx.o pcnet.o iommu.o m48t59.o slavio_intctl.o
OBJS+= slavio_timer.o escc.o slavio_misc.o fdc.o sparc32_dma.o
OBJS+= cs4231.o ptimer.o eccmemctl.o sbi.o sun4c_intctl.o
endif
endif
ifeq ($(TARGET_BASE_ARCH), arm)
OBJS+= integratorcp.o versatilepb.o ps2.o smc91c111.o arm_pic.o arm_timer.o
OBJS+= arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
OBJS+= versatile_pci.o ptimer.o
OBJS+= realview_gic.o realview.o arm_sysctl.o mpcore.o
OBJS+= armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
OBJS+= pl061.o
OBJS+= arm-semi.o
OBJS+= pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
OBJS+= pflash_cfi01.o gumstix.o
OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o
OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
OBJS+= omap2.o omap_dss.o soc_dma.o
OBJS+= omap_sx1.o palm.o tsc210x.o
OBJS+= nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
OBJS+= tsc2005.o bt-hci-csr.o
OBJS+= mst_fpga.o mainstone.o
OBJS+= musicpal.o pflash_cfi02.o
CPPFLAGS += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), sh4)
OBJS+= shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
OBJS+= sh_timer.o ptimer.o sh_serial.o sh_intc.o sh_pci.o sm501.o serial.o
OBJS+= ide.o
endif
ifeq ($(TARGET_BASE_ARCH), m68k)
OBJS+= an5206.o mcf5206.o ptimer.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
OBJS+= m68k-semi.o dummy_m68k.o
endif
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o gdbstub-xml.o
endif
ifdef CONFIG_COCOA
COCOA_LIBS=-F/System/Library/Frameworks -framework Cocoa -framework IOKit
ifdef CONFIG_COREAUDIO
COCOA_LIBS+=-framework CoreAudio
endif
endif
ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
endif
LIBS+=$(AIOLIBS)
# specific flags are needed for non soft mmu emulator
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
ifndef CONFIG_DARWIN
ifndef CONFIG_WIN32
ifndef CONFIG_SOLARIS
ifndef CONFIG_AIX
LIBS+=-lutil
endif
endif
endif
endif
ifdef TARGET_GPROF
vl.o: CFLAGS+=-p
LDFLAGS+=-p
endif
ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/ia64.ld
endif
ifdef CONFIG_WIN32
SDL_LIBS := $(filter-out -mwindows, $(SDL_LIBS)) -mconsole
endif
# profiling code
ifdef TARGET_GPROF
LDFLAGS+=-p
main.o: CFLAGS+=-p
endif
$(QEMU_PROG): LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS)
$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a
$(LINK)
endif # !CONFIG_USER_ONLY
gdbstub-xml.c: $(TARGET_XML_FILES) feature_to_c.sh
rm -f $@
ifeq ($(TARGET_XML_FILES),)
echo > $@
else
$(SHELL) $(SRC_PATH)/feature_to_c.sh $@ $(TARGET_XML_FILES)
endif
clean:
rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
rm -f *.d */*.d tcg/*.o
install: all
ifneq ($(PROGS),)
$(INSTALL) -m 755 -s $(PROGS) "$(DESTDIR)$(bindir)"
endif
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)
Reference in New Issue View Git Blame Copy Permalink