qemu-e2k/linux-user/alpha/cpu_loop.c

222 lines
8.0 KiB
C

/*
* qemu user cpu loop
*
* Copyright (c) 2003-2008 Fabrice Bellard
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu.h"
#include "cpu_loop-common.h"
void cpu_loop(CPUAlphaState *env)
{
CPUState *cs = CPU(alpha_env_get_cpu(env));
int trapnr;
target_siginfo_t info;
abi_long sysret;
while (1) {
bool arch_interrupt = true;
cpu_exec_start(cs);
trapnr = cpu_exec(cs);
cpu_exec_end(cs);
process_queued_cpu_work(cs);
switch (trapnr) {
case EXCP_RESET:
fprintf(stderr, "Reset requested. Exit\n");
exit(EXIT_FAILURE);
break;
case EXCP_MCHK:
fprintf(stderr, "Machine check exception. Exit\n");
exit(EXIT_FAILURE);
break;
case EXCP_SMP_INTERRUPT:
case EXCP_CLK_INTERRUPT:
case EXCP_DEV_INTERRUPT:
fprintf(stderr, "External interrupt. Exit\n");
exit(EXIT_FAILURE);
break;
case EXCP_MMFAULT:
info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
info.si_code = (page_get_flags(env->trap_arg0) & PAGE_VALID
? TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR);
info._sifields._sigfault._addr = env->trap_arg0;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_UNALIGN:
info.si_signo = TARGET_SIGBUS;
info.si_errno = 0;
info.si_code = TARGET_BUS_ADRALN;
info._sifields._sigfault._addr = env->trap_arg0;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_OPCDEC:
do_sigill:
info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPC;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_ARITH:
info.si_signo = TARGET_SIGFPE;
info.si_errno = 0;
info.si_code = TARGET_FPE_FLTINV;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_FEN:
/* No-op. Linux simply re-enables the FPU. */
break;
case EXCP_CALL_PAL:
switch (env->error_code) {
case 0x80:
/* BPT */
info.si_signo = TARGET_SIGTRAP;
info.si_errno = 0;
info.si_code = TARGET_TRAP_BRKPT;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case 0x81:
/* BUGCHK */
info.si_signo = TARGET_SIGTRAP;
info.si_errno = 0;
info.si_code = 0;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case 0x83:
/* CALLSYS */
trapnr = env->ir[IR_V0];
sysret = do_syscall(env, trapnr,
env->ir[IR_A0], env->ir[IR_A1],
env->ir[IR_A2], env->ir[IR_A3],
env->ir[IR_A4], env->ir[IR_A5],
0, 0);
if (sysret == -TARGET_ERESTARTSYS) {
env->pc -= 4;
break;
}
if (sysret == -TARGET_QEMU_ESIGRETURN) {
break;
}
/* Syscall writes 0 to V0 to bypass error check, similar
to how this is handled internal to Linux kernel.
(Ab)use trapnr temporarily as boolean indicating error. */
trapnr = (env->ir[IR_V0] != 0 && sysret < 0);
env->ir[IR_V0] = (trapnr ? -sysret : sysret);
env->ir[IR_A3] = trapnr;
break;
case 0x86:
/* IMB */
/* ??? We can probably elide the code using page_unprotect
that is checking for self-modifying code. Instead we
could simply call tb_flush here. Until we work out the
changes required to turn off the extra write protection,
this can be a no-op. */
break;
case 0x9E:
/* RDUNIQUE */
/* Handled in the translator for usermode. */
abort();
case 0x9F:
/* WRUNIQUE */
/* Handled in the translator for usermode. */
abort();
case 0xAA:
/* GENTRAP */
info.si_signo = TARGET_SIGFPE;
switch (env->ir[IR_A0]) {
case TARGET_GEN_INTOVF:
info.si_code = TARGET_FPE_INTOVF;
break;
case TARGET_GEN_INTDIV:
info.si_code = TARGET_FPE_INTDIV;
break;
case TARGET_GEN_FLTOVF:
info.si_code = TARGET_FPE_FLTOVF;
break;
case TARGET_GEN_FLTUND:
info.si_code = TARGET_FPE_FLTUND;
break;
case TARGET_GEN_FLTINV:
info.si_code = TARGET_FPE_FLTINV;
break;
case TARGET_GEN_FLTINE:
info.si_code = TARGET_FPE_FLTRES;
break;
case TARGET_GEN_ROPRAND:
info.si_code = 0;
break;
default:
info.si_signo = TARGET_SIGTRAP;
info.si_code = 0;
break;
}
info.si_errno = 0;
info._sifields._sigfault._addr = env->pc;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
default:
goto do_sigill;
}
break;
case EXCP_DEBUG:
info.si_signo = TARGET_SIGTRAP;
info.si_errno = 0;
info.si_code = TARGET_TRAP_BRKPT;
queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
break;
case EXCP_INTERRUPT:
/* Just indicate that signals should be handled asap. */
break;
case EXCP_ATOMIC:
cpu_exec_step_atomic(cs);
arch_interrupt = false;
break;
default:
fprintf(stderr, "Unhandled trap: 0x%x\n", trapnr);
cpu_dump_state(cs, stderr, fprintf, 0);
exit(EXIT_FAILURE);
}
process_pending_signals (env);
/* Most of the traps imply a transition through PALcode, which
implies an REI instruction has been executed. Which means
that RX and LOCK_ADDR should be cleared. But there are a
few exceptions for traps internal to QEMU. */
if (arch_interrupt) {
env->flags &= ~ENV_FLAG_RX_FLAG;
env->lock_addr = -1;
}
}
}
void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
{
int i;
for(i = 0; i < 28; i++) {
env->ir[i] = ((abi_ulong *)regs)[i];
}
env->ir[IR_SP] = regs->usp;
env->pc = regs->pc;
}