993 lines
32 KiB
C
993 lines
32 KiB
C
/*
|
|
* CFI parallel flash with Intel command set emulation
|
|
*
|
|
* Copyright (c) 2006 Thorsten Zitterell
|
|
* Copyright (c) 2005 Jocelyn Mayer
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
|
* Supported commands/modes are:
|
|
* - flash read
|
|
* - flash write
|
|
* - flash ID read
|
|
* - sector erase
|
|
* - CFI queries
|
|
*
|
|
* It does not support timings
|
|
* It does not support flash interleaving
|
|
* It does not implement software data protection as found in many real chips
|
|
* It does not implement erase suspend/resume commands
|
|
* It does not implement multiple sectors erase
|
|
*
|
|
* It does not implement much more ...
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/hw.h"
|
|
#include "hw/block/block.h"
|
|
#include "hw/block/flash.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu/timer.h"
|
|
#include "qemu/bitops.h"
|
|
#include "qemu/host-utils.h"
|
|
#include "qemu/log.h"
|
|
#include "hw/sysbus.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "trace.h"
|
|
|
|
/* #define PFLASH_DEBUG */
|
|
#ifdef PFLASH_DEBUG
|
|
#define DPRINTF(fmt, ...) \
|
|
do { \
|
|
fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \
|
|
} while (0)
|
|
#else
|
|
#define DPRINTF(fmt, ...) do { } while (0)
|
|
#endif
|
|
|
|
#define PFLASH_BE 0
|
|
#define PFLASH_SECURE 1
|
|
|
|
struct PFlashCFI01 {
|
|
/*< private >*/
|
|
SysBusDevice parent_obj;
|
|
/*< public >*/
|
|
|
|
BlockBackend *blk;
|
|
uint32_t nb_blocs;
|
|
uint64_t sector_len;
|
|
uint8_t bank_width;
|
|
uint8_t device_width; /* If 0, device width not specified. */
|
|
uint8_t max_device_width; /* max device width in bytes */
|
|
uint32_t features;
|
|
uint8_t wcycle; /* if 0, the flash is read normally */
|
|
int ro;
|
|
uint8_t cmd;
|
|
uint8_t status;
|
|
uint16_t ident0;
|
|
uint16_t ident1;
|
|
uint16_t ident2;
|
|
uint16_t ident3;
|
|
uint8_t cfi_table[0x52];
|
|
uint64_t counter;
|
|
unsigned int writeblock_size;
|
|
QEMUTimer *timer;
|
|
MemoryRegion mem;
|
|
char *name;
|
|
void *storage;
|
|
VMChangeStateEntry *vmstate;
|
|
bool old_multiple_chip_handling;
|
|
};
|
|
|
|
static int pflash_post_load(void *opaque, int version_id);
|
|
|
|
static const VMStateDescription vmstate_pflash = {
|
|
.name = "pflash_cfi01",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.post_load = pflash_post_load,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8(wcycle, PFlashCFI01),
|
|
VMSTATE_UINT8(cmd, PFlashCFI01),
|
|
VMSTATE_UINT8(status, PFlashCFI01),
|
|
VMSTATE_UINT64(counter, PFlashCFI01),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static void pflash_timer (void *opaque)
|
|
{
|
|
PFlashCFI01 *pfl = opaque;
|
|
|
|
trace_pflash_timer_expired(pfl->cmd);
|
|
/* Reset flash */
|
|
pfl->status ^= 0x80;
|
|
memory_region_rom_device_set_romd(&pfl->mem, true);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
}
|
|
|
|
/* Perform a CFI query based on the bank width of the flash.
|
|
* If this code is called we know we have a device_width set for
|
|
* this flash.
|
|
*/
|
|
static uint32_t pflash_cfi_query(PFlashCFI01 *pfl, hwaddr offset)
|
|
{
|
|
int i;
|
|
uint32_t resp = 0;
|
|
hwaddr boff;
|
|
|
|
/* Adjust incoming offset to match expected device-width
|
|
* addressing. CFI query addresses are always specified in terms of
|
|
* the maximum supported width of the device. This means that x8
|
|
* devices and x8/x16 devices in x8 mode behave differently. For
|
|
* devices that are not used at their max width, we will be
|
|
* provided with addresses that use higher address bits than
|
|
* expected (based on the max width), so we will shift them lower
|
|
* so that they will match the addresses used when
|
|
* device_width==max_device_width.
|
|
*/
|
|
boff = offset >> (ctz32(pfl->bank_width) +
|
|
ctz32(pfl->max_device_width) - ctz32(pfl->device_width));
|
|
|
|
if (boff >= sizeof(pfl->cfi_table)) {
|
|
return 0;
|
|
}
|
|
/* Now we will construct the CFI response generated by a single
|
|
* device, then replicate that for all devices that make up the
|
|
* bus. For wide parts used in x8 mode, CFI query responses
|
|
* are different than native byte-wide parts.
|
|
*/
|
|
resp = pfl->cfi_table[boff];
|
|
if (pfl->device_width != pfl->max_device_width) {
|
|
/* The only case currently supported is x8 mode for a
|
|
* wider part.
|
|
*/
|
|
if (pfl->device_width != 1 || pfl->bank_width > 4) {
|
|
DPRINTF("%s: Unsupported device configuration: "
|
|
"device_width=%d, max_device_width=%d\n",
|
|
__func__, pfl->device_width,
|
|
pfl->max_device_width);
|
|
return 0;
|
|
}
|
|
/* CFI query data is repeated, rather than zero padded for
|
|
* wide devices used in x8 mode.
|
|
*/
|
|
for (i = 1; i < pfl->max_device_width; i++) {
|
|
resp = deposit32(resp, 8 * i, 8, pfl->cfi_table[boff]);
|
|
}
|
|
}
|
|
/* Replicate responses for each device in bank. */
|
|
if (pfl->device_width < pfl->bank_width) {
|
|
for (i = pfl->device_width;
|
|
i < pfl->bank_width; i += pfl->device_width) {
|
|
resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp);
|
|
}
|
|
}
|
|
|
|
return resp;
|
|
}
|
|
|
|
|
|
|
|
/* Perform a device id query based on the bank width of the flash. */
|
|
static uint32_t pflash_devid_query(PFlashCFI01 *pfl, hwaddr offset)
|
|
{
|
|
int i;
|
|
uint32_t resp;
|
|
hwaddr boff;
|
|
|
|
/* Adjust incoming offset to match expected device-width
|
|
* addressing. Device ID read addresses are always specified in
|
|
* terms of the maximum supported width of the device. This means
|
|
* that x8 devices and x8/x16 devices in x8 mode behave
|
|
* differently. For devices that are not used at their max width,
|
|
* we will be provided with addresses that use higher address bits
|
|
* than expected (based on the max width), so we will shift them
|
|
* lower so that they will match the addresses used when
|
|
* device_width==max_device_width.
|
|
*/
|
|
boff = offset >> (ctz32(pfl->bank_width) +
|
|
ctz32(pfl->max_device_width) - ctz32(pfl->device_width));
|
|
|
|
/* Mask off upper bits which may be used in to query block
|
|
* or sector lock status at other addresses.
|
|
* Offsets 2/3 are block lock status, is not emulated.
|
|
*/
|
|
switch (boff & 0xFF) {
|
|
case 0:
|
|
resp = pfl->ident0;
|
|
trace_pflash_manufacturer_id(resp);
|
|
break;
|
|
case 1:
|
|
resp = pfl->ident1;
|
|
trace_pflash_device_id(resp);
|
|
break;
|
|
default:
|
|
trace_pflash_device_info(offset);
|
|
return 0;
|
|
break;
|
|
}
|
|
/* Replicate responses for each device in bank. */
|
|
if (pfl->device_width < pfl->bank_width) {
|
|
for (i = pfl->device_width;
|
|
i < pfl->bank_width; i += pfl->device_width) {
|
|
resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp);
|
|
}
|
|
}
|
|
|
|
return resp;
|
|
}
|
|
|
|
static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset,
|
|
int width, int be)
|
|
{
|
|
uint8_t *p;
|
|
uint32_t ret;
|
|
|
|
p = pfl->storage;
|
|
switch (width) {
|
|
case 1:
|
|
ret = p[offset];
|
|
trace_pflash_data_read8(offset, ret);
|
|
break;
|
|
case 2:
|
|
if (be) {
|
|
ret = p[offset] << 8;
|
|
ret |= p[offset + 1];
|
|
} else {
|
|
ret = p[offset];
|
|
ret |= p[offset + 1] << 8;
|
|
}
|
|
trace_pflash_data_read16(offset, ret);
|
|
break;
|
|
case 4:
|
|
if (be) {
|
|
ret = p[offset] << 24;
|
|
ret |= p[offset + 1] << 16;
|
|
ret |= p[offset + 2] << 8;
|
|
ret |= p[offset + 3];
|
|
} else {
|
|
ret = p[offset];
|
|
ret |= p[offset + 1] << 8;
|
|
ret |= p[offset + 2] << 16;
|
|
ret |= p[offset + 3] << 24;
|
|
}
|
|
trace_pflash_data_read32(offset, ret);
|
|
break;
|
|
default:
|
|
DPRINTF("BUG in %s\n", __func__);
|
|
abort();
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,
|
|
int width, int be)
|
|
{
|
|
hwaddr boff;
|
|
uint32_t ret;
|
|
|
|
ret = -1;
|
|
trace_pflash_read(offset, pfl->cmd, width, pfl->wcycle);
|
|
switch (pfl->cmd) {
|
|
default:
|
|
/* This should never happen : reset state & treat it as a read */
|
|
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
/* fall through to read code */
|
|
case 0x00:
|
|
/* Flash area read */
|
|
ret = pflash_data_read(pfl, offset, width, be);
|
|
break;
|
|
case 0x10: /* Single byte program */
|
|
case 0x20: /* Block erase */
|
|
case 0x28: /* Block erase */
|
|
case 0x40: /* single byte program */
|
|
case 0x50: /* Clear status register */
|
|
case 0x60: /* Block /un)lock */
|
|
case 0x70: /* Status Register */
|
|
case 0xe8: /* Write block */
|
|
/* Status register read. Return status from each device in
|
|
* bank.
|
|
*/
|
|
ret = pfl->status;
|
|
if (pfl->device_width && width > pfl->device_width) {
|
|
int shift = pfl->device_width * 8;
|
|
while (shift + pfl->device_width * 8 <= width * 8) {
|
|
ret |= pfl->status << shift;
|
|
shift += pfl->device_width * 8;
|
|
}
|
|
} else if (!pfl->device_width && width > 2) {
|
|
/* Handle 32 bit flash cases where device width is not
|
|
* set. (Existing behavior before device width added.)
|
|
*/
|
|
ret |= pfl->status << 16;
|
|
}
|
|
DPRINTF("%s: status %x\n", __func__, ret);
|
|
break;
|
|
case 0x90:
|
|
if (!pfl->device_width) {
|
|
/* Preserve old behavior if device width not specified */
|
|
boff = offset & 0xFF;
|
|
if (pfl->bank_width == 2) {
|
|
boff = boff >> 1;
|
|
} else if (pfl->bank_width == 4) {
|
|
boff = boff >> 2;
|
|
}
|
|
|
|
switch (boff) {
|
|
case 0:
|
|
ret = pfl->ident0 << 8 | pfl->ident1;
|
|
trace_pflash_manufacturer_id(ret);
|
|
break;
|
|
case 1:
|
|
ret = pfl->ident2 << 8 | pfl->ident3;
|
|
trace_pflash_device_id(ret);
|
|
break;
|
|
default:
|
|
trace_pflash_device_info(boff);
|
|
ret = 0;
|
|
break;
|
|
}
|
|
} else {
|
|
/* If we have a read larger than the bank_width, combine multiple
|
|
* manufacturer/device ID queries into a single response.
|
|
*/
|
|
int i;
|
|
for (i = 0; i < width; i += pfl->bank_width) {
|
|
ret = deposit32(ret, i * 8, pfl->bank_width * 8,
|
|
pflash_devid_query(pfl,
|
|
offset + i * pfl->bank_width));
|
|
}
|
|
}
|
|
break;
|
|
case 0x98: /* Query mode */
|
|
if (!pfl->device_width) {
|
|
/* Preserve old behavior if device width not specified */
|
|
boff = offset & 0xFF;
|
|
if (pfl->bank_width == 2) {
|
|
boff = boff >> 1;
|
|
} else if (pfl->bank_width == 4) {
|
|
boff = boff >> 2;
|
|
}
|
|
|
|
if (boff < sizeof(pfl->cfi_table)) {
|
|
ret = pfl->cfi_table[boff];
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
} else {
|
|
/* If we have a read larger than the bank_width, combine multiple
|
|
* CFI queries into a single response.
|
|
*/
|
|
int i;
|
|
for (i = 0; i < width; i += pfl->bank_width) {
|
|
ret = deposit32(ret, i * 8, pfl->bank_width * 8,
|
|
pflash_cfi_query(pfl,
|
|
offset + i * pfl->bank_width));
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* update flash content on disk */
|
|
static void pflash_update(PFlashCFI01 *pfl, int offset,
|
|
int size)
|
|
{
|
|
int offset_end;
|
|
if (pfl->blk) {
|
|
offset_end = offset + size;
|
|
/* widen to sector boundaries */
|
|
offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE);
|
|
offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE);
|
|
blk_pwrite(pfl->blk, offset, pfl->storage + offset,
|
|
offset_end - offset, 0);
|
|
}
|
|
}
|
|
|
|
static inline void pflash_data_write(PFlashCFI01 *pfl, hwaddr offset,
|
|
uint32_t value, int width, int be)
|
|
{
|
|
uint8_t *p = pfl->storage;
|
|
|
|
trace_pflash_data_write(offset, value, width, pfl->counter);
|
|
switch (width) {
|
|
case 1:
|
|
p[offset] = value;
|
|
break;
|
|
case 2:
|
|
if (be) {
|
|
p[offset] = value >> 8;
|
|
p[offset + 1] = value;
|
|
} else {
|
|
p[offset] = value;
|
|
p[offset + 1] = value >> 8;
|
|
}
|
|
break;
|
|
case 4:
|
|
if (be) {
|
|
p[offset] = value >> 24;
|
|
p[offset + 1] = value >> 16;
|
|
p[offset + 2] = value >> 8;
|
|
p[offset + 3] = value;
|
|
} else {
|
|
p[offset] = value;
|
|
p[offset + 1] = value >> 8;
|
|
p[offset + 2] = value >> 16;
|
|
p[offset + 3] = value >> 24;
|
|
}
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
|
|
uint32_t value, int width, int be)
|
|
{
|
|
uint8_t *p;
|
|
uint8_t cmd;
|
|
|
|
cmd = value;
|
|
|
|
trace_pflash_write(offset, value, width, pfl->wcycle);
|
|
if (!pfl->wcycle) {
|
|
/* Set the device in I/O access mode */
|
|
memory_region_rom_device_set_romd(&pfl->mem, false);
|
|
}
|
|
|
|
switch (pfl->wcycle) {
|
|
case 0:
|
|
/* read mode */
|
|
switch (cmd) {
|
|
case 0x00: /* ??? */
|
|
goto reset_flash;
|
|
case 0x10: /* Single Byte Program */
|
|
case 0x40: /* Single Byte Program */
|
|
DPRINTF("%s: Single Byte Program\n", __func__);
|
|
break;
|
|
case 0x20: /* Block erase */
|
|
p = pfl->storage;
|
|
offset &= ~(pfl->sector_len - 1);
|
|
|
|
DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes %x\n",
|
|
__func__, offset, (unsigned)pfl->sector_len);
|
|
|
|
if (!pfl->ro) {
|
|
memset(p + offset, 0xff, pfl->sector_len);
|
|
pflash_update(pfl, offset, pfl->sector_len);
|
|
} else {
|
|
pfl->status |= 0x20; /* Block erase error */
|
|
}
|
|
pfl->status |= 0x80; /* Ready! */
|
|
break;
|
|
case 0x50: /* Clear status bits */
|
|
DPRINTF("%s: Clear status bits\n", __func__);
|
|
pfl->status = 0x0;
|
|
goto reset_flash;
|
|
case 0x60: /* Block (un)lock */
|
|
DPRINTF("%s: Block unlock\n", __func__);
|
|
break;
|
|
case 0x70: /* Status Register */
|
|
DPRINTF("%s: Read status register\n", __func__);
|
|
pfl->cmd = cmd;
|
|
return;
|
|
case 0x90: /* Read Device ID */
|
|
DPRINTF("%s: Read Device information\n", __func__);
|
|
pfl->cmd = cmd;
|
|
return;
|
|
case 0x98: /* CFI query */
|
|
DPRINTF("%s: CFI query\n", __func__);
|
|
break;
|
|
case 0xe8: /* Write to buffer */
|
|
DPRINTF("%s: Write to buffer\n", __func__);
|
|
/* FIXME should save @offset, @width for case 1+ */
|
|
qemu_log_mask(LOG_UNIMP,
|
|
"%s: Write to buffer emulation is flawed\n",
|
|
__func__);
|
|
pfl->status |= 0x80; /* Ready! */
|
|
break;
|
|
case 0xf0: /* Probe for AMD flash */
|
|
DPRINTF("%s: Probe for AMD flash\n", __func__);
|
|
goto reset_flash;
|
|
case 0xff: /* Read array mode */
|
|
DPRINTF("%s: Read array mode\n", __func__);
|
|
goto reset_flash;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
pfl->wcycle++;
|
|
pfl->cmd = cmd;
|
|
break;
|
|
case 1:
|
|
switch (pfl->cmd) {
|
|
case 0x10: /* Single Byte Program */
|
|
case 0x40: /* Single Byte Program */
|
|
DPRINTF("%s: Single Byte Program\n", __func__);
|
|
if (!pfl->ro) {
|
|
pflash_data_write(pfl, offset, value, width, be);
|
|
pflash_update(pfl, offset, width);
|
|
} else {
|
|
pfl->status |= 0x10; /* Programming error */
|
|
}
|
|
pfl->status |= 0x80; /* Ready! */
|
|
pfl->wcycle = 0;
|
|
break;
|
|
case 0x20: /* Block erase */
|
|
case 0x28:
|
|
if (cmd == 0xd0) { /* confirm */
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else if (cmd == 0xff) { /* read array mode */
|
|
goto reset_flash;
|
|
} else
|
|
goto error_flash;
|
|
|
|
break;
|
|
case 0xe8:
|
|
/* Mask writeblock size based on device width, or bank width if
|
|
* device width not specified.
|
|
*/
|
|
/* FIXME check @offset, @width */
|
|
if (pfl->device_width) {
|
|
value = extract32(value, 0, pfl->device_width * 8);
|
|
} else {
|
|
value = extract32(value, 0, pfl->bank_width * 8);
|
|
}
|
|
DPRINTF("%s: block write of %x bytes\n", __func__, value);
|
|
pfl->counter = value;
|
|
pfl->wcycle++;
|
|
break;
|
|
case 0x60:
|
|
if (cmd == 0xd0) {
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else if (cmd == 0x01) {
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else if (cmd == 0xff) {
|
|
goto reset_flash;
|
|
} else {
|
|
DPRINTF("%s: Unknown (un)locking command\n", __func__);
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
case 0x98:
|
|
if (cmd == 0xff) {
|
|
goto reset_flash;
|
|
} else {
|
|
DPRINTF("%s: leaving query mode\n", __func__);
|
|
}
|
|
break;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
break;
|
|
case 2:
|
|
switch (pfl->cmd) {
|
|
case 0xe8: /* Block write */
|
|
/* FIXME check @offset, @width */
|
|
if (!pfl->ro) {
|
|
/*
|
|
* FIXME writing straight to memory is *wrong*. We
|
|
* should write to a buffer, and flush it to memory
|
|
* only on confirm command (see below).
|
|
*/
|
|
pflash_data_write(pfl, offset, value, width, be);
|
|
} else {
|
|
pfl->status |= 0x10; /* Programming error */
|
|
}
|
|
|
|
pfl->status |= 0x80;
|
|
|
|
if (!pfl->counter) {
|
|
hwaddr mask = pfl->writeblock_size - 1;
|
|
mask = ~mask;
|
|
|
|
DPRINTF("%s: block write finished\n", __func__);
|
|
pfl->wcycle++;
|
|
if (!pfl->ro) {
|
|
/* Flush the entire write buffer onto backing storage. */
|
|
/* FIXME premature! */
|
|
pflash_update(pfl, offset & mask, pfl->writeblock_size);
|
|
} else {
|
|
pfl->status |= 0x10; /* Programming error */
|
|
}
|
|
}
|
|
|
|
pfl->counter--;
|
|
break;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
break;
|
|
case 3: /* Confirm mode */
|
|
switch (pfl->cmd) {
|
|
case 0xe8: /* Block write */
|
|
if (cmd == 0xd0) {
|
|
/* FIXME this is where we should write out the buffer */
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else {
|
|
qemu_log_mask(LOG_UNIMP,
|
|
"%s: Aborting write to buffer not implemented,"
|
|
" the data is already written to storage!\n"
|
|
"Flash device reset into READ mode.\n",
|
|
__func__);
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
break;
|
|
default:
|
|
/* Should never happen */
|
|
DPRINTF("%s: invalid write state\n", __func__);
|
|
goto reset_flash;
|
|
}
|
|
return;
|
|
|
|
error_flash:
|
|
qemu_log_mask(LOG_UNIMP, "%s: Unimplemented flash cmd sequence "
|
|
"(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)"
|
|
"\n", __func__, offset, pfl->wcycle, pfl->cmd, value);
|
|
|
|
reset_flash:
|
|
trace_pflash_reset();
|
|
memory_region_rom_device_set_romd(&pfl->mem, true);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
}
|
|
|
|
|
|
static MemTxResult pflash_mem_read_with_attrs(void *opaque, hwaddr addr, uint64_t *value,
|
|
unsigned len, MemTxAttrs attrs)
|
|
{
|
|
PFlashCFI01 *pfl = opaque;
|
|
bool be = !!(pfl->features & (1 << PFLASH_BE));
|
|
|
|
if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) {
|
|
*value = pflash_data_read(opaque, addr, len, be);
|
|
} else {
|
|
*value = pflash_read(opaque, addr, len, be);
|
|
}
|
|
return MEMTX_OK;
|
|
}
|
|
|
|
static MemTxResult pflash_mem_write_with_attrs(void *opaque, hwaddr addr, uint64_t value,
|
|
unsigned len, MemTxAttrs attrs)
|
|
{
|
|
PFlashCFI01 *pfl = opaque;
|
|
bool be = !!(pfl->features & (1 << PFLASH_BE));
|
|
|
|
if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) {
|
|
return MEMTX_ERROR;
|
|
} else {
|
|
pflash_write(opaque, addr, value, len, be);
|
|
return MEMTX_OK;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps pflash_cfi01_ops = {
|
|
.read_with_attrs = pflash_mem_read_with_attrs,
|
|
.write_with_attrs = pflash_mem_write_with_attrs,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void pflash_cfi01_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
PFlashCFI01 *pfl = PFLASH_CFI01(dev);
|
|
uint64_t total_len;
|
|
int ret;
|
|
uint64_t blocks_per_device, sector_len_per_device, device_len;
|
|
int num_devices;
|
|
Error *local_err = NULL;
|
|
|
|
if (pfl->sector_len == 0) {
|
|
error_setg(errp, "attribute \"sector-length\" not specified or zero.");
|
|
return;
|
|
}
|
|
if (pfl->nb_blocs == 0) {
|
|
error_setg(errp, "attribute \"num-blocks\" not specified or zero.");
|
|
return;
|
|
}
|
|
if (pfl->name == NULL) {
|
|
error_setg(errp, "attribute \"name\" not specified.");
|
|
return;
|
|
}
|
|
|
|
total_len = pfl->sector_len * pfl->nb_blocs;
|
|
|
|
/* These are only used to expose the parameters of each device
|
|
* in the cfi_table[].
|
|
*/
|
|
num_devices = pfl->device_width ? (pfl->bank_width / pfl->device_width) : 1;
|
|
if (pfl->old_multiple_chip_handling) {
|
|
blocks_per_device = pfl->nb_blocs / num_devices;
|
|
sector_len_per_device = pfl->sector_len;
|
|
} else {
|
|
blocks_per_device = pfl->nb_blocs;
|
|
sector_len_per_device = pfl->sector_len / num_devices;
|
|
}
|
|
device_len = sector_len_per_device * blocks_per_device;
|
|
|
|
memory_region_init_rom_device(
|
|
&pfl->mem, OBJECT(dev),
|
|
&pflash_cfi01_ops,
|
|
pfl,
|
|
pfl->name, total_len, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
pfl->storage = memory_region_get_ram_ptr(&pfl->mem);
|
|
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem);
|
|
|
|
if (pfl->blk) {
|
|
uint64_t perm;
|
|
pfl->ro = blk_is_read_only(pfl->blk);
|
|
perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE);
|
|
ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp);
|
|
if (ret < 0) {
|
|
return;
|
|
}
|
|
} else {
|
|
pfl->ro = 0;
|
|
}
|
|
|
|
if (pfl->blk) {
|
|
if (!blk_check_size_and_read_all(pfl->blk, pfl->storage, total_len,
|
|
errp)) {
|
|
vmstate_unregister_ram(&pfl->mem, DEVICE(pfl));
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Default to devices being used at their maximum device width. This was
|
|
* assumed before the device_width support was added.
|
|
*/
|
|
if (!pfl->max_device_width) {
|
|
pfl->max_device_width = pfl->device_width;
|
|
}
|
|
|
|
pfl->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pflash_timer, pfl);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
pfl->status = 0;
|
|
/* Hardcoded CFI table */
|
|
/* Standard "QRY" string */
|
|
pfl->cfi_table[0x10] = 'Q';
|
|
pfl->cfi_table[0x11] = 'R';
|
|
pfl->cfi_table[0x12] = 'Y';
|
|
/* Command set (Intel) */
|
|
pfl->cfi_table[0x13] = 0x01;
|
|
pfl->cfi_table[0x14] = 0x00;
|
|
/* Primary extended table address (none) */
|
|
pfl->cfi_table[0x15] = 0x31;
|
|
pfl->cfi_table[0x16] = 0x00;
|
|
/* Alternate command set (none) */
|
|
pfl->cfi_table[0x17] = 0x00;
|
|
pfl->cfi_table[0x18] = 0x00;
|
|
/* Alternate extended table (none) */
|
|
pfl->cfi_table[0x19] = 0x00;
|
|
pfl->cfi_table[0x1A] = 0x00;
|
|
/* Vcc min */
|
|
pfl->cfi_table[0x1B] = 0x45;
|
|
/* Vcc max */
|
|
pfl->cfi_table[0x1C] = 0x55;
|
|
/* Vpp min (no Vpp pin) */
|
|
pfl->cfi_table[0x1D] = 0x00;
|
|
/* Vpp max (no Vpp pin) */
|
|
pfl->cfi_table[0x1E] = 0x00;
|
|
/* Reserved */
|
|
pfl->cfi_table[0x1F] = 0x07;
|
|
/* Timeout for min size buffer write */
|
|
pfl->cfi_table[0x20] = 0x07;
|
|
/* Typical timeout for block erase */
|
|
pfl->cfi_table[0x21] = 0x0a;
|
|
/* Typical timeout for full chip erase (4096 ms) */
|
|
pfl->cfi_table[0x22] = 0x00;
|
|
/* Reserved */
|
|
pfl->cfi_table[0x23] = 0x04;
|
|
/* Max timeout for buffer write */
|
|
pfl->cfi_table[0x24] = 0x04;
|
|
/* Max timeout for block erase */
|
|
pfl->cfi_table[0x25] = 0x04;
|
|
/* Max timeout for chip erase */
|
|
pfl->cfi_table[0x26] = 0x00;
|
|
/* Device size */
|
|
pfl->cfi_table[0x27] = ctz32(device_len); /* + 1; */
|
|
/* Flash device interface (8 & 16 bits) */
|
|
pfl->cfi_table[0x28] = 0x02;
|
|
pfl->cfi_table[0x29] = 0x00;
|
|
/* Max number of bytes in multi-bytes write */
|
|
if (pfl->bank_width == 1) {
|
|
pfl->cfi_table[0x2A] = 0x08;
|
|
} else {
|
|
pfl->cfi_table[0x2A] = 0x0B;
|
|
}
|
|
pfl->writeblock_size = 1 << pfl->cfi_table[0x2A];
|
|
if (!pfl->old_multiple_chip_handling && num_devices > 1) {
|
|
pfl->writeblock_size *= num_devices;
|
|
}
|
|
|
|
pfl->cfi_table[0x2B] = 0x00;
|
|
/* Number of erase block regions (uniform) */
|
|
pfl->cfi_table[0x2C] = 0x01;
|
|
/* Erase block region 1 */
|
|
pfl->cfi_table[0x2D] = blocks_per_device - 1;
|
|
pfl->cfi_table[0x2E] = (blocks_per_device - 1) >> 8;
|
|
pfl->cfi_table[0x2F] = sector_len_per_device >> 8;
|
|
pfl->cfi_table[0x30] = sector_len_per_device >> 16;
|
|
|
|
/* Extended */
|
|
pfl->cfi_table[0x31] = 'P';
|
|
pfl->cfi_table[0x32] = 'R';
|
|
pfl->cfi_table[0x33] = 'I';
|
|
|
|
pfl->cfi_table[0x34] = '1';
|
|
pfl->cfi_table[0x35] = '0';
|
|
|
|
pfl->cfi_table[0x36] = 0x00;
|
|
pfl->cfi_table[0x37] = 0x00;
|
|
pfl->cfi_table[0x38] = 0x00;
|
|
pfl->cfi_table[0x39] = 0x00;
|
|
|
|
pfl->cfi_table[0x3a] = 0x00;
|
|
|
|
pfl->cfi_table[0x3b] = 0x00;
|
|
pfl->cfi_table[0x3c] = 0x00;
|
|
|
|
pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */
|
|
}
|
|
|
|
static Property pflash_cfi01_properties[] = {
|
|
DEFINE_PROP_DRIVE("drive", PFlashCFI01, blk),
|
|
/* num-blocks is the number of blocks actually visible to the guest,
|
|
* ie the total size of the device divided by the sector length.
|
|
* If we're emulating flash devices wired in parallel the actual
|
|
* number of blocks per indvidual device will differ.
|
|
*/
|
|
DEFINE_PROP_UINT32("num-blocks", PFlashCFI01, nb_blocs, 0),
|
|
DEFINE_PROP_UINT64("sector-length", PFlashCFI01, sector_len, 0),
|
|
/* width here is the overall width of this QEMU device in bytes.
|
|
* The QEMU device may be emulating a number of flash devices
|
|
* wired up in parallel; the width of each individual flash
|
|
* device should be specified via device-width. If the individual
|
|
* devices have a maximum width which is greater than the width
|
|
* they are being used for, this maximum width should be set via
|
|
* max-device-width (which otherwise defaults to device-width).
|
|
* So for instance a 32-bit wide QEMU flash device made from four
|
|
* 16-bit flash devices used in 8-bit wide mode would be configured
|
|
* with width = 4, device-width = 1, max-device-width = 2.
|
|
*
|
|
* If device-width is not specified we default to backwards
|
|
* compatible behaviour which is a bad emulation of two
|
|
* 16 bit devices making up a 32 bit wide QEMU device. This
|
|
* is deprecated for new uses of this device.
|
|
*/
|
|
DEFINE_PROP_UINT8("width", PFlashCFI01, bank_width, 0),
|
|
DEFINE_PROP_UINT8("device-width", PFlashCFI01, device_width, 0),
|
|
DEFINE_PROP_UINT8("max-device-width", PFlashCFI01, max_device_width, 0),
|
|
DEFINE_PROP_BIT("big-endian", PFlashCFI01, features, PFLASH_BE, 0),
|
|
DEFINE_PROP_BIT("secure", PFlashCFI01, features, PFLASH_SECURE, 0),
|
|
DEFINE_PROP_UINT16("id0", PFlashCFI01, ident0, 0),
|
|
DEFINE_PROP_UINT16("id1", PFlashCFI01, ident1, 0),
|
|
DEFINE_PROP_UINT16("id2", PFlashCFI01, ident2, 0),
|
|
DEFINE_PROP_UINT16("id3", PFlashCFI01, ident3, 0),
|
|
DEFINE_PROP_STRING("name", PFlashCFI01, name),
|
|
DEFINE_PROP_BOOL("old-multiple-chip-handling", PFlashCFI01,
|
|
old_multiple_chip_handling, false),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void pflash_cfi01_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->realize = pflash_cfi01_realize;
|
|
dc->props = pflash_cfi01_properties;
|
|
dc->vmsd = &vmstate_pflash;
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
|
|
static const TypeInfo pflash_cfi01_info = {
|
|
.name = TYPE_PFLASH_CFI01,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(PFlashCFI01),
|
|
.class_init = pflash_cfi01_class_init,
|
|
};
|
|
|
|
static void pflash_cfi01_register_types(void)
|
|
{
|
|
type_register_static(&pflash_cfi01_info);
|
|
}
|
|
|
|
type_init(pflash_cfi01_register_types)
|
|
|
|
PFlashCFI01 *pflash_cfi01_register(hwaddr base,
|
|
const char *name,
|
|
hwaddr size,
|
|
BlockBackend *blk,
|
|
uint32_t sector_len,
|
|
int bank_width,
|
|
uint16_t id0, uint16_t id1,
|
|
uint16_t id2, uint16_t id3,
|
|
int be)
|
|
{
|
|
DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01);
|
|
|
|
if (blk) {
|
|
qdev_prop_set_drive(dev, "drive", blk, &error_abort);
|
|
}
|
|
assert(size % sector_len == 0);
|
|
qdev_prop_set_uint32(dev, "num-blocks", size / sector_len);
|
|
qdev_prop_set_uint64(dev, "sector-length", sector_len);
|
|
qdev_prop_set_uint8(dev, "width", bank_width);
|
|
qdev_prop_set_bit(dev, "big-endian", !!be);
|
|
qdev_prop_set_uint16(dev, "id0", id0);
|
|
qdev_prop_set_uint16(dev, "id1", id1);
|
|
qdev_prop_set_uint16(dev, "id2", id2);
|
|
qdev_prop_set_uint16(dev, "id3", id3);
|
|
qdev_prop_set_string(dev, "name", name);
|
|
qdev_init_nofail(dev);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
|
|
return PFLASH_CFI01(dev);
|
|
}
|
|
|
|
BlockBackend *pflash_cfi01_get_blk(PFlashCFI01 *fl)
|
|
{
|
|
return fl->blk;
|
|
}
|
|
|
|
MemoryRegion *pflash_cfi01_get_memory(PFlashCFI01 *fl)
|
|
{
|
|
return &fl->mem;
|
|
}
|
|
|
|
static void postload_update_cb(void *opaque, int running, RunState state)
|
|
{
|
|
PFlashCFI01 *pfl = opaque;
|
|
|
|
/* This is called after bdrv_invalidate_cache_all. */
|
|
qemu_del_vm_change_state_handler(pfl->vmstate);
|
|
pfl->vmstate = NULL;
|
|
|
|
DPRINTF("%s: updating bdrv for %s\n", __func__, pfl->name);
|
|
pflash_update(pfl, 0, pfl->sector_len * pfl->nb_blocs);
|
|
}
|
|
|
|
static int pflash_post_load(void *opaque, int version_id)
|
|
{
|
|
PFlashCFI01 *pfl = opaque;
|
|
|
|
if (!pfl->ro) {
|
|
pfl->vmstate = qemu_add_vm_change_state_handler(postload_update_cb,
|
|
pfl);
|
|
}
|
|
return 0;
|
|
}
|