ae2474f118
Change the iMX-SoC based boards to use the new boot.c functionality to allow us to enable psci-conduit only if the guest is being booted in EL1 or EL2, so that if the user runs guest EL3 firmware code our PSCI emulation doesn't get in its way. To do this we stop setting the psci-conduit property on the CPU objects in the SoC code, and instead set the psci_conduit field in the arm_boot_info struct to tell the common boot loader code that we'd like PSCI if the guest is starting at an EL that it makes sense with. This affects the mcimx6ul-evk and mcimx7d-sabre boards. Note that for the mcimx7d board, this means that when running guest code at EL3 there is currently no way to power on the secondary CPUs, because we do not currently have a model of the system reset controller module which should be used to do that for the imx7 SoC, only for the imx6 SoC. (Previously EL3 code which knew it was running on QEMU could use a PSCI call to do this.) This doesn't affect the imx6ul-evk board because it is uniprocessor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Cédric Le Goater <clg@kaod.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220127154639.2090164-5-peter.maydell@linaro.org
593 lines
18 KiB
C
593 lines
18 KiB
C
/*
|
|
* Copyright (c) 2018, Impinj, Inc.
|
|
*
|
|
* i.MX7 SoC definitions
|
|
*
|
|
* Author: Andrey Smirnov <andrew.smirnov@gmail.com>
|
|
*
|
|
* Based on hw/arm/fsl-imx6.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/arm/fsl-imx7.h"
|
|
#include "hw/misc/unimp.h"
|
|
#include "hw/boards.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/module.h"
|
|
|
|
#define NAME_SIZE 20
|
|
|
|
static void fsl_imx7_init(Object *obj)
|
|
{
|
|
MachineState *ms = MACHINE(qdev_get_machine());
|
|
FslIMX7State *s = FSL_IMX7(obj);
|
|
char name[NAME_SIZE];
|
|
int i;
|
|
|
|
for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) {
|
|
snprintf(name, NAME_SIZE, "cpu%d", i);
|
|
object_initialize_child(obj, name, &s->cpu[i],
|
|
ARM_CPU_TYPE_NAME("cortex-a7"));
|
|
}
|
|
|
|
/*
|
|
* A7MPCORE
|
|
*/
|
|
object_initialize_child(obj, "a7mpcore", &s->a7mpcore,
|
|
TYPE_A15MPCORE_PRIV);
|
|
|
|
/*
|
|
* GPIOs 1 to 7
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) {
|
|
snprintf(name, NAME_SIZE, "gpio%d", i);
|
|
object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
|
|
}
|
|
|
|
/*
|
|
* GPT1, 2, 3, 4
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) {
|
|
snprintf(name, NAME_SIZE, "gpt%d", i);
|
|
object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX7_GPT);
|
|
}
|
|
|
|
/*
|
|
* CCM
|
|
*/
|
|
object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX7_CCM);
|
|
|
|
/*
|
|
* Analog
|
|
*/
|
|
object_initialize_child(obj, "analog", &s->analog, TYPE_IMX7_ANALOG);
|
|
|
|
/*
|
|
* GPCv2
|
|
*/
|
|
object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2);
|
|
|
|
for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) {
|
|
snprintf(name, NAME_SIZE, "spi%d", i + 1);
|
|
object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
|
|
}
|
|
|
|
|
|
for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) {
|
|
snprintf(name, NAME_SIZE, "i2c%d", i + 1);
|
|
object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
|
|
}
|
|
|
|
/*
|
|
* UART
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) {
|
|
snprintf(name, NAME_SIZE, "uart%d", i);
|
|
object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
|
|
}
|
|
|
|
/*
|
|
* Ethernet
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) {
|
|
snprintf(name, NAME_SIZE, "eth%d", i);
|
|
object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET);
|
|
}
|
|
|
|
/*
|
|
* SDHCI
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) {
|
|
snprintf(name, NAME_SIZE, "usdhc%d", i);
|
|
object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
|
|
}
|
|
|
|
/*
|
|
* SNVS
|
|
*/
|
|
object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS);
|
|
|
|
/*
|
|
* Watchdog
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) {
|
|
snprintf(name, NAME_SIZE, "wdt%d", i);
|
|
object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
|
|
}
|
|
|
|
/*
|
|
* GPR
|
|
*/
|
|
object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR);
|
|
|
|
object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST);
|
|
|
|
for (i = 0; i < FSL_IMX7_NUM_USBS; i++) {
|
|
snprintf(name, NAME_SIZE, "usb%d", i);
|
|
object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA);
|
|
}
|
|
}
|
|
|
|
static void fsl_imx7_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
MachineState *ms = MACHINE(qdev_get_machine());
|
|
FslIMX7State *s = FSL_IMX7(dev);
|
|
Object *o;
|
|
int i;
|
|
qemu_irq irq;
|
|
char name[NAME_SIZE];
|
|
unsigned int smp_cpus = ms->smp.cpus;
|
|
|
|
if (smp_cpus > FSL_IMX7_NUM_CPUS) {
|
|
error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
|
|
TYPE_FSL_IMX7, FSL_IMX7_NUM_CPUS, smp_cpus);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < smp_cpus; i++) {
|
|
o = OBJECT(&s->cpu[i]);
|
|
|
|
/* On uniprocessor, the CBAR is set to 0 */
|
|
if (smp_cpus > 1) {
|
|
object_property_set_int(o, "reset-cbar", FSL_IMX7_A7MPCORE_ADDR,
|
|
&error_abort);
|
|
}
|
|
|
|
if (i) {
|
|
/*
|
|
* Secondary CPUs start in powered-down state (and can be
|
|
* powered up via the SRC system reset controller)
|
|
*/
|
|
object_property_set_bool(o, "start-powered-off", true,
|
|
&error_abort);
|
|
}
|
|
|
|
qdev_realize(DEVICE(o), NULL, &error_abort);
|
|
}
|
|
|
|
/*
|
|
* A7MPCORE
|
|
*/
|
|
object_property_set_int(OBJECT(&s->a7mpcore), "num-cpu", smp_cpus,
|
|
&error_abort);
|
|
object_property_set_int(OBJECT(&s->a7mpcore), "num-irq",
|
|
FSL_IMX7_MAX_IRQ + GIC_INTERNAL, &error_abort);
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->a7mpcore), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX7_A7MPCORE_ADDR);
|
|
|
|
for (i = 0; i < smp_cpus; i++) {
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore);
|
|
DeviceState *d = DEVICE(qemu_get_cpu(i));
|
|
|
|
irq = qdev_get_gpio_in(d, ARM_CPU_IRQ);
|
|
sysbus_connect_irq(sbd, i, irq);
|
|
irq = qdev_get_gpio_in(d, ARM_CPU_FIQ);
|
|
sysbus_connect_irq(sbd, i + smp_cpus, irq);
|
|
irq = qdev_get_gpio_in(d, ARM_CPU_VIRQ);
|
|
sysbus_connect_irq(sbd, i + 2 * smp_cpus, irq);
|
|
irq = qdev_get_gpio_in(d, ARM_CPU_VFIQ);
|
|
sysbus_connect_irq(sbd, i + 3 * smp_cpus, irq);
|
|
}
|
|
|
|
/*
|
|
* A7MPCORE DAP
|
|
*/
|
|
create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR,
|
|
0x100000);
|
|
|
|
/*
|
|
* GPT1, 2, 3, 4
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) {
|
|
static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = {
|
|
FSL_IMX7_GPT1_ADDR,
|
|
FSL_IMX7_GPT2_ADDR,
|
|
FSL_IMX7_GPT3_ADDR,
|
|
FSL_IMX7_GPT4_ADDR,
|
|
};
|
|
|
|
s->gpt[i].ccm = IMX_CCM(&s->ccm);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, FSL_IMX7_GPTn_ADDR[i]);
|
|
}
|
|
|
|
for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) {
|
|
static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = {
|
|
FSL_IMX7_GPIO1_ADDR,
|
|
FSL_IMX7_GPIO2_ADDR,
|
|
FSL_IMX7_GPIO3_ADDR,
|
|
FSL_IMX7_GPIO4_ADDR,
|
|
FSL_IMX7_GPIO5_ADDR,
|
|
FSL_IMX7_GPIO6_ADDR,
|
|
FSL_IMX7_GPIO7_ADDR,
|
|
};
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]);
|
|
}
|
|
|
|
/*
|
|
* IOMUXC and IOMUXC_LPSR
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) {
|
|
static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = {
|
|
FSL_IMX7_IOMUXC_ADDR,
|
|
FSL_IMX7_IOMUXC_LPSR_ADDR,
|
|
};
|
|
|
|
snprintf(name, NAME_SIZE, "iomuxc%d", i);
|
|
create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i],
|
|
FSL_IMX7_IOMUXCn_SIZE);
|
|
}
|
|
|
|
/*
|
|
* CCM
|
|
*/
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX7_CCM_ADDR);
|
|
|
|
/*
|
|
* Analog
|
|
*/
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->analog), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, FSL_IMX7_ANALOG_ADDR);
|
|
|
|
/*
|
|
* GPCv2
|
|
*/
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR);
|
|
|
|
/* Initialize all ECSPI */
|
|
for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) {
|
|
static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = {
|
|
FSL_IMX7_ECSPI1_ADDR,
|
|
FSL_IMX7_ECSPI2_ADDR,
|
|
FSL_IMX7_ECSPI3_ADDR,
|
|
FSL_IMX7_ECSPI4_ADDR,
|
|
};
|
|
|
|
static const int FSL_IMX7_SPIn_IRQ[FSL_IMX7_NUM_ECSPIS] = {
|
|
FSL_IMX7_ECSPI1_IRQ,
|
|
FSL_IMX7_ECSPI2_IRQ,
|
|
FSL_IMX7_ECSPI3_IRQ,
|
|
FSL_IMX7_ECSPI4_IRQ,
|
|
};
|
|
|
|
/* Initialize the SPI */
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
|
|
FSL_IMX7_SPIn_ADDR[i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
|
|
FSL_IMX7_SPIn_IRQ[i]));
|
|
}
|
|
|
|
for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) {
|
|
static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = {
|
|
FSL_IMX7_I2C1_ADDR,
|
|
FSL_IMX7_I2C2_ADDR,
|
|
FSL_IMX7_I2C3_ADDR,
|
|
FSL_IMX7_I2C4_ADDR,
|
|
};
|
|
|
|
static const int FSL_IMX7_I2Cn_IRQ[FSL_IMX7_NUM_I2CS] = {
|
|
FSL_IMX7_I2C1_IRQ,
|
|
FSL_IMX7_I2C2_IRQ,
|
|
FSL_IMX7_I2C3_IRQ,
|
|
FSL_IMX7_I2C4_IRQ,
|
|
};
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX7_I2Cn_ADDR[i]);
|
|
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
|
|
FSL_IMX7_I2Cn_IRQ[i]));
|
|
}
|
|
|
|
/*
|
|
* UART
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) {
|
|
static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = {
|
|
FSL_IMX7_UART1_ADDR,
|
|
FSL_IMX7_UART2_ADDR,
|
|
FSL_IMX7_UART3_ADDR,
|
|
FSL_IMX7_UART4_ADDR,
|
|
FSL_IMX7_UART5_ADDR,
|
|
FSL_IMX7_UART6_ADDR,
|
|
FSL_IMX7_UART7_ADDR,
|
|
};
|
|
|
|
static const int FSL_IMX7_UARTn_IRQ[FSL_IMX7_NUM_UARTS] = {
|
|
FSL_IMX7_UART1_IRQ,
|
|
FSL_IMX7_UART2_IRQ,
|
|
FSL_IMX7_UART3_IRQ,
|
|
FSL_IMX7_UART4_IRQ,
|
|
FSL_IMX7_UART5_IRQ,
|
|
FSL_IMX7_UART6_IRQ,
|
|
FSL_IMX7_UART7_IRQ,
|
|
};
|
|
|
|
|
|
qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), &error_abort);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, FSL_IMX7_UARTn_ADDR[i]);
|
|
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_UARTn_IRQ[i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, irq);
|
|
}
|
|
|
|
/*
|
|
* Ethernet
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) {
|
|
static const hwaddr FSL_IMX7_ENETn_ADDR[FSL_IMX7_NUM_ETHS] = {
|
|
FSL_IMX7_ENET1_ADDR,
|
|
FSL_IMX7_ENET2_ADDR,
|
|
};
|
|
|
|
object_property_set_uint(OBJECT(&s->eth[i]), "phy-num",
|
|
s->phy_num[i], &error_abort);
|
|
object_property_set_uint(OBJECT(&s->eth[i]), "tx-ring-num",
|
|
FSL_IMX7_ETH_NUM_TX_RINGS, &error_abort);
|
|
qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->eth[i]), &error_abort);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0, FSL_IMX7_ENETn_ADDR[i]);
|
|
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_ENET_IRQ(i, 0));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0, irq);
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_ENET_IRQ(i, 3));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1, irq);
|
|
}
|
|
|
|
/*
|
|
* USDHC
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) {
|
|
static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = {
|
|
FSL_IMX7_USDHC1_ADDR,
|
|
FSL_IMX7_USDHC2_ADDR,
|
|
FSL_IMX7_USDHC3_ADDR,
|
|
};
|
|
|
|
static const int FSL_IMX7_USDHCn_IRQ[FSL_IMX7_NUM_USDHCS] = {
|
|
FSL_IMX7_USDHC1_IRQ,
|
|
FSL_IMX7_USDHC2_IRQ,
|
|
FSL_IMX7_USDHC3_IRQ,
|
|
};
|
|
|
|
object_property_set_uint(OBJECT(&s->usdhc[i]), "vendor",
|
|
SDHCI_VENDOR_IMX, &error_abort);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), &error_abort);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
|
|
FSL_IMX7_USDHCn_ADDR[i]);
|
|
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_USDHCn_IRQ[i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, irq);
|
|
}
|
|
|
|
/*
|
|
* SNVS
|
|
*/
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR);
|
|
|
|
/*
|
|
* SRC
|
|
*/
|
|
create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE);
|
|
|
|
/*
|
|
* Watchdog
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) {
|
|
static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = {
|
|
FSL_IMX7_WDOG1_ADDR,
|
|
FSL_IMX7_WDOG2_ADDR,
|
|
FSL_IMX7_WDOG3_ADDR,
|
|
FSL_IMX7_WDOG4_ADDR,
|
|
};
|
|
static const int FSL_IMX7_WDOGn_IRQ[FSL_IMX7_NUM_WDTS] = {
|
|
FSL_IMX7_WDOG1_IRQ,
|
|
FSL_IMX7_WDOG2_IRQ,
|
|
FSL_IMX7_WDOG3_IRQ,
|
|
FSL_IMX7_WDOG4_IRQ,
|
|
};
|
|
|
|
object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
|
|
true, &error_abort);
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX7_WDOGn_ADDR[i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
|
|
FSL_IMX7_WDOGn_IRQ[i]));
|
|
}
|
|
|
|
/*
|
|
* SDMA
|
|
*/
|
|
create_unimplemented_device("sdma", FSL_IMX7_SDMA_ADDR, FSL_IMX7_SDMA_SIZE);
|
|
|
|
/*
|
|
* CAAM
|
|
*/
|
|
create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE);
|
|
|
|
/*
|
|
* PWM
|
|
*/
|
|
create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE);
|
|
create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE);
|
|
create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE);
|
|
create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE);
|
|
|
|
/*
|
|
* CAN
|
|
*/
|
|
create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE);
|
|
create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE);
|
|
|
|
/*
|
|
* SAI (Audio SSI (Synchronous Serial Interface))
|
|
*/
|
|
create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE);
|
|
create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE);
|
|
create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE);
|
|
|
|
/*
|
|
* OCOTP
|
|
*/
|
|
create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR,
|
|
FSL_IMX7_OCOTP_SIZE);
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR);
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR);
|
|
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTA_IRQ);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, irq);
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTB_IRQ);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, irq);
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTC_IRQ);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, irq);
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq);
|
|
|
|
|
|
for (i = 0; i < FSL_IMX7_NUM_USBS; i++) {
|
|
static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = {
|
|
FSL_IMX7_USBMISC1_ADDR,
|
|
FSL_IMX7_USBMISC2_ADDR,
|
|
FSL_IMX7_USBMISC3_ADDR,
|
|
};
|
|
|
|
static const hwaddr FSL_IMX7_USBn_ADDR[FSL_IMX7_NUM_USBS] = {
|
|
FSL_IMX7_USB1_ADDR,
|
|
FSL_IMX7_USB2_ADDR,
|
|
FSL_IMX7_USB3_ADDR,
|
|
};
|
|
|
|
static const int FSL_IMX7_USBn_IRQ[FSL_IMX7_NUM_USBS] = {
|
|
FSL_IMX7_USB1_IRQ,
|
|
FSL_IMX7_USB2_IRQ,
|
|
FSL_IMX7_USB3_IRQ,
|
|
};
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0,
|
|
FSL_IMX7_USBn_ADDR[i]);
|
|
|
|
irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_USBn_IRQ[i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, irq);
|
|
|
|
snprintf(name, NAME_SIZE, "usbmisc%d", i);
|
|
create_unimplemented_device(name, FSL_IMX7_USBMISCn_ADDR[i],
|
|
FSL_IMX7_USBMISCn_SIZE);
|
|
}
|
|
|
|
/*
|
|
* ADCs
|
|
*/
|
|
for (i = 0; i < FSL_IMX7_NUM_ADCS; i++) {
|
|
static const hwaddr FSL_IMX7_ADCn_ADDR[FSL_IMX7_NUM_ADCS] = {
|
|
FSL_IMX7_ADC1_ADDR,
|
|
FSL_IMX7_ADC2_ADDR,
|
|
};
|
|
|
|
snprintf(name, NAME_SIZE, "adc%d", i);
|
|
create_unimplemented_device(name, FSL_IMX7_ADCn_ADDR[i],
|
|
FSL_IMX7_ADCn_SIZE);
|
|
}
|
|
|
|
/*
|
|
* LCD
|
|
*/
|
|
create_unimplemented_device("lcdif", FSL_IMX7_LCDIF_ADDR,
|
|
FSL_IMX7_LCDIF_SIZE);
|
|
|
|
/*
|
|
* DMA APBH
|
|
*/
|
|
create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR,
|
|
FSL_IMX7_DMA_APBH_SIZE);
|
|
/*
|
|
* PCIe PHY
|
|
*/
|
|
create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR,
|
|
FSL_IMX7_PCIE_PHY_SIZE);
|
|
}
|
|
|
|
static Property fsl_imx7_properties[] = {
|
|
DEFINE_PROP_UINT32("fec1-phy-num", FslIMX7State, phy_num[0], 0),
|
|
DEFINE_PROP_UINT32("fec2-phy-num", FslIMX7State, phy_num[1], 1),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void fsl_imx7_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
|
|
device_class_set_props(dc, fsl_imx7_properties);
|
|
dc->realize = fsl_imx7_realize;
|
|
|
|
/* Reason: Uses serial_hds and nd_table in realize() directly */
|
|
dc->user_creatable = false;
|
|
dc->desc = "i.MX7 SOC";
|
|
}
|
|
|
|
static const TypeInfo fsl_imx7_type_info = {
|
|
.name = TYPE_FSL_IMX7,
|
|
.parent = TYPE_DEVICE,
|
|
.instance_size = sizeof(FslIMX7State),
|
|
.instance_init = fsl_imx7_init,
|
|
.class_init = fsl_imx7_class_init,
|
|
};
|
|
|
|
static void fsl_imx7_register_types(void)
|
|
{
|
|
type_register_static(&fsl_imx7_type_info);
|
|
}
|
|
type_init(fsl_imx7_register_types)
|