qemu-e2k/hw/tc6393xb.c
Alex Williamson 1724f04985 qemu_ram_alloc: Add DeviceState and name parameters
These will be used to generate unique id strings for ramblocks.  The name
field is required, the device pointer is optional as most callers don't
have a device.  When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00

609 lines
18 KiB
C

/*
* Toshiba TC6393XB I/O Controller.
* Found in Sharp Zaurus SL-6000 (tosa) or some
* Toshiba e-Series PDAs.
*
* Most features are currently unsupported!!!
*
* This code is licensed under the GNU GPL v2.
*/
#include "hw.h"
#include "pxa.h"
#include "devices.h"
#include "flash.h"
#include "console.h"
#include "pixel_ops.h"
#define IRQ_TC6393_NAND 0
#define IRQ_TC6393_MMC 1
#define IRQ_TC6393_OHCI 2
#define IRQ_TC6393_SERIAL 3
#define IRQ_TC6393_FB 4
#define TC6393XB_NR_IRQS 8
#define TC6393XB_GPIOS 16
#define SCR_REVID 0x08 /* b Revision ID */
#define SCR_ISR 0x50 /* b Interrupt Status */
#define SCR_IMR 0x52 /* b Interrupt Mask */
#define SCR_IRR 0x54 /* b Interrupt Routing */
#define SCR_GPER 0x60 /* w GP Enable */
#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */
#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */
#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */
#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */
#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */
#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */
#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */
#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */
#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */
#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */
#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */
#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */
#define SCR_CCR 0x98 /* w Clock Control */
#define SCR_PLL2CR 0x9a /* w PLL2 Control */
#define SCR_PLL1CR 0x9c /* l PLL1 Control */
#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */
#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */
#define SCR_FER 0xe0 /* b Function Enable */
#define SCR_MCR 0xe4 /* w Mode Control */
#define SCR_CONFIG 0xfc /* b Configuration Control */
#define SCR_DEBUG 0xff /* b Debug */
#define NAND_CFG_COMMAND 0x04 /* w Command */
#define NAND_CFG_BASE 0x10 /* l Control Base Address */
#define NAND_CFG_INTP 0x3d /* b Interrupt Pin */
#define NAND_CFG_INTE 0x48 /* b Int Enable */
#define NAND_CFG_EC 0x4a /* b Event Control */
#define NAND_CFG_ICC 0x4c /* b Internal Clock Control */
#define NAND_CFG_ECCC 0x5b /* b ECC Control */
#define NAND_CFG_NFTC 0x60 /* b NAND Flash Transaction Control */
#define NAND_CFG_NFM 0x61 /* b NAND Flash Monitor */
#define NAND_CFG_NFPSC 0x62 /* b NAND Flash Power Supply Control */
#define NAND_CFG_NFDC 0x63 /* b NAND Flash Detect Control */
#define NAND_DATA 0x00 /* l Data */
#define NAND_MODE 0x04 /* b Mode */
#define NAND_STATUS 0x05 /* b Status */
#define NAND_ISR 0x06 /* b Interrupt Status */
#define NAND_IMR 0x07 /* b Interrupt Mask */
#define NAND_MODE_WP 0x80
#define NAND_MODE_CE 0x10
#define NAND_MODE_ALE 0x02
#define NAND_MODE_CLE 0x01
#define NAND_MODE_ECC_MASK 0x60
#define NAND_MODE_ECC_EN 0x20
#define NAND_MODE_ECC_READ 0x40
#define NAND_MODE_ECC_RST 0x60
struct TC6393xbState {
qemu_irq irq;
qemu_irq *sub_irqs;
struct {
uint8_t ISR;
uint8_t IMR;
uint8_t IRR;
uint16_t GPER;
uint8_t GPI_SR[3];
uint8_t GPI_IMR[3];
uint8_t GPI_EDER[3];
uint8_t GPI_LIR[3];
uint8_t GP_IARCR[3];
uint8_t GP_IARLCR[3];
uint8_t GPI_BCR[3];
uint16_t GPA_IARCR;
uint16_t GPA_IARLCR;
uint16_t CCR;
uint16_t PLL2CR;
uint32_t PLL1CR;
uint8_t DIARCR;
uint8_t DBOCR;
uint8_t FER;
uint16_t MCR;
uint8_t CONFIG;
uint8_t DEBUG;
} scr;
uint32_t gpio_dir;
uint32_t gpio_level;
uint32_t prev_level;
qemu_irq handler[TC6393XB_GPIOS];
qemu_irq *gpio_in;
struct {
uint8_t mode;
uint8_t isr;
uint8_t imr;
} nand;
int nand_enable;
uint32_t nand_phys;
NANDFlashState *flash;
ECCState ecc;
DisplayState *ds;
ram_addr_t vram_addr;
uint16_t *vram_ptr;
uint32_t scr_width, scr_height; /* in pixels */
qemu_irq l3v;
unsigned blank : 1,
blanked : 1;
};
qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s)
{
return s->gpio_in;
}
static void tc6393xb_gpio_set(void *opaque, int line, int level)
{
// TC6393xbState *s = opaque;
if (line > TC6393XB_GPIOS) {
printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
return;
}
// FIXME: how does the chip reflect the GPIO input level change?
}
void tc6393xb_gpio_out_set(TC6393xbState *s, int line,
qemu_irq handler)
{
if (line >= TC6393XB_GPIOS) {
fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line);
return;
}
s->handler[line] = handler;
}
static void tc6393xb_gpio_handler_update(TC6393xbState *s)
{
uint32_t level, diff;
int bit;
level = s->gpio_level & s->gpio_dir;
for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
bit = ffs(diff) - 1;
qemu_set_irq(s->handler[bit], (level >> bit) & 1);
}
s->prev_level = level;
}
qemu_irq tc6393xb_l3v_get(TC6393xbState *s)
{
return s->l3v;
}
static void tc6393xb_l3v(void *opaque, int line, int level)
{
TC6393xbState *s = opaque;
s->blank = !level;
fprintf(stderr, "L3V: %d\n", level);
}
static void tc6393xb_sub_irq(void *opaque, int line, int level) {
TC6393xbState *s = opaque;
uint8_t isr = s->scr.ISR;
if (level)
isr |= 1 << line;
else
isr &= ~(1 << line);
s->scr.ISR = isr;
qemu_set_irq(s->irq, isr & s->scr.IMR);
}
#define SCR_REG_B(N) \
case SCR_ ##N: return s->scr.N
#define SCR_REG_W(N) \
case SCR_ ##N: return s->scr.N; \
case SCR_ ##N + 1: return s->scr.N >> 8;
#define SCR_REG_L(N) \
case SCR_ ##N: return s->scr.N; \
case SCR_ ##N + 1: return s->scr.N >> 8; \
case SCR_ ##N + 2: return s->scr.N >> 16; \
case SCR_ ##N + 3: return s->scr.N >> 24;
#define SCR_REG_A(N) \
case SCR_ ##N(0): return s->scr.N[0]; \
case SCR_ ##N(1): return s->scr.N[1]; \
case SCR_ ##N(2): return s->scr.N[2]
static uint32_t tc6393xb_scr_readb(TC6393xbState *s, target_phys_addr_t addr)
{
switch (addr) {
case SCR_REVID:
return 3;
case SCR_REVID+1:
return 0;
SCR_REG_B(ISR);
SCR_REG_B(IMR);
SCR_REG_B(IRR);
SCR_REG_W(GPER);
SCR_REG_A(GPI_SR);
SCR_REG_A(GPI_IMR);
SCR_REG_A(GPI_EDER);
SCR_REG_A(GPI_LIR);
case SCR_GPO_DSR(0):
case SCR_GPO_DSR(1):
case SCR_GPO_DSR(2):
return (s->gpio_level >> ((addr - SCR_GPO_DSR(0)) * 8)) & 0xff;
case SCR_GPO_DOECR(0):
case SCR_GPO_DOECR(1):
case SCR_GPO_DOECR(2):
return (s->gpio_dir >> ((addr - SCR_GPO_DOECR(0)) * 8)) & 0xff;
SCR_REG_A(GP_IARCR);
SCR_REG_A(GP_IARLCR);
SCR_REG_A(GPI_BCR);
SCR_REG_W(GPA_IARCR);
SCR_REG_W(GPA_IARLCR);
SCR_REG_W(CCR);
SCR_REG_W(PLL2CR);
SCR_REG_L(PLL1CR);
SCR_REG_B(DIARCR);
SCR_REG_B(DBOCR);
SCR_REG_B(FER);
SCR_REG_W(MCR);
SCR_REG_B(CONFIG);
SCR_REG_B(DEBUG);
}
fprintf(stderr, "tc6393xb_scr: unhandled read at %08x\n", (uint32_t) addr);
return 0;
}
#undef SCR_REG_B
#undef SCR_REG_W
#undef SCR_REG_L
#undef SCR_REG_A
#define SCR_REG_B(N) \
case SCR_ ##N: s->scr.N = value; return;
#define SCR_REG_W(N) \
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); return; \
case SCR_ ##N + 1: s->scr.N = (s->scr.N & 0xff) | (value << 8); return
#define SCR_REG_L(N) \
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); return; \
case SCR_ ##N + 1: s->scr.N = (s->scr.N & ~(0xff << 8)) | (value & (0xff << 8)); return; \
case SCR_ ##N + 2: s->scr.N = (s->scr.N & ~(0xff << 16)) | (value & (0xff << 16)); return; \
case SCR_ ##N + 3: s->scr.N = (s->scr.N & ~(0xff << 24)) | (value & (0xff << 24)); return;
#define SCR_REG_A(N) \
case SCR_ ##N(0): s->scr.N[0] = value; return; \
case SCR_ ##N(1): s->scr.N[1] = value; return; \
case SCR_ ##N(2): s->scr.N[2] = value; return
static void tc6393xb_scr_writeb(TC6393xbState *s, target_phys_addr_t addr, uint32_t value)
{
switch (addr) {
SCR_REG_B(ISR);
SCR_REG_B(IMR);
SCR_REG_B(IRR);
SCR_REG_W(GPER);
SCR_REG_A(GPI_SR);
SCR_REG_A(GPI_IMR);
SCR_REG_A(GPI_EDER);
SCR_REG_A(GPI_LIR);
case SCR_GPO_DSR(0):
case SCR_GPO_DSR(1):
case SCR_GPO_DSR(2):
s->gpio_level = (s->gpio_level & ~(0xff << ((addr - SCR_GPO_DSR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DSR(0))*8));
tc6393xb_gpio_handler_update(s);
return;
case SCR_GPO_DOECR(0):
case SCR_GPO_DOECR(1):
case SCR_GPO_DOECR(2):
s->gpio_dir = (s->gpio_dir & ~(0xff << ((addr - SCR_GPO_DOECR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DOECR(0))*8));
tc6393xb_gpio_handler_update(s);
return;
SCR_REG_A(GP_IARCR);
SCR_REG_A(GP_IARLCR);
SCR_REG_A(GPI_BCR);
SCR_REG_W(GPA_IARCR);
SCR_REG_W(GPA_IARLCR);
SCR_REG_W(CCR);
SCR_REG_W(PLL2CR);
SCR_REG_L(PLL1CR);
SCR_REG_B(DIARCR);
SCR_REG_B(DBOCR);
SCR_REG_B(FER);
SCR_REG_W(MCR);
SCR_REG_B(CONFIG);
SCR_REG_B(DEBUG);
}
fprintf(stderr, "tc6393xb_scr: unhandled write at %08x: %02x\n",
(uint32_t) addr, value & 0xff);
}
#undef SCR_REG_B
#undef SCR_REG_W
#undef SCR_REG_L
#undef SCR_REG_A
static void tc6393xb_nand_irq(TC6393xbState *s) {
qemu_set_irq(s->sub_irqs[IRQ_TC6393_NAND],
(s->nand.imr & 0x80) && (s->nand.imr & s->nand.isr));
}
static uint32_t tc6393xb_nand_cfg_readb(TC6393xbState *s, target_phys_addr_t addr) {
switch (addr) {
case NAND_CFG_COMMAND:
return s->nand_enable ? 2 : 0;
case NAND_CFG_BASE:
case NAND_CFG_BASE + 1:
case NAND_CFG_BASE + 2:
case NAND_CFG_BASE + 3:
return s->nand_phys >> (addr - NAND_CFG_BASE);
}
fprintf(stderr, "tc6393xb_nand_cfg: unhandled read at %08x\n", (uint32_t) addr);
return 0;
}
static void tc6393xb_nand_cfg_writeb(TC6393xbState *s, target_phys_addr_t addr, uint32_t value) {
switch (addr) {
case NAND_CFG_COMMAND:
s->nand_enable = (value & 0x2);
return;
case NAND_CFG_BASE:
case NAND_CFG_BASE + 1:
case NAND_CFG_BASE + 2:
case NAND_CFG_BASE + 3:
s->nand_phys &= ~(0xff << ((addr - NAND_CFG_BASE) * 8));
s->nand_phys |= (value & 0xff) << ((addr - NAND_CFG_BASE) * 8);
return;
}
fprintf(stderr, "tc6393xb_nand_cfg: unhandled write at %08x: %02x\n",
(uint32_t) addr, value & 0xff);
}
static uint32_t tc6393xb_nand_readb(TC6393xbState *s, target_phys_addr_t addr) {
switch (addr) {
case NAND_DATA + 0:
case NAND_DATA + 1:
case NAND_DATA + 2:
case NAND_DATA + 3:
return nand_getio(s->flash);
case NAND_MODE:
return s->nand.mode;
case NAND_STATUS:
return 0x14;
case NAND_ISR:
return s->nand.isr;
case NAND_IMR:
return s->nand.imr;
}
fprintf(stderr, "tc6393xb_nand: unhandled read at %08x\n", (uint32_t) addr);
return 0;
}
static void tc6393xb_nand_writeb(TC6393xbState *s, target_phys_addr_t addr, uint32_t value) {
// fprintf(stderr, "tc6393xb_nand: write at %08x: %02x\n",
// (uint32_t) addr, value & 0xff);
switch (addr) {
case NAND_DATA + 0:
case NAND_DATA + 1:
case NAND_DATA + 2:
case NAND_DATA + 3:
nand_setio(s->flash, value);
s->nand.isr &= 1;
tc6393xb_nand_irq(s);
return;
case NAND_MODE:
s->nand.mode = value;
nand_setpins(s->flash,
value & NAND_MODE_CLE,
value & NAND_MODE_ALE,
!(value & NAND_MODE_CE),
value & NAND_MODE_WP,
0); // FIXME: gnd
switch (value & NAND_MODE_ECC_MASK) {
case NAND_MODE_ECC_RST:
ecc_reset(&s->ecc);
break;
case NAND_MODE_ECC_READ:
// FIXME
break;
case NAND_MODE_ECC_EN:
ecc_reset(&s->ecc);
}
return;
case NAND_ISR:
s->nand.isr = value;
tc6393xb_nand_irq(s);
return;
case NAND_IMR:
s->nand.imr = value;
tc6393xb_nand_irq(s);
return;
}
fprintf(stderr, "tc6393xb_nand: unhandled write at %08x: %02x\n",
(uint32_t) addr, value & 0xff);
}
#define BITS 8
#include "tc6393xb_template.h"
#define BITS 15
#include "tc6393xb_template.h"
#define BITS 16
#include "tc6393xb_template.h"
#define BITS 24
#include "tc6393xb_template.h"
#define BITS 32
#include "tc6393xb_template.h"
static void tc6393xb_draw_graphic(TC6393xbState *s, int full_update)
{
switch (ds_get_bits_per_pixel(s->ds)) {
case 8:
tc6393xb_draw_graphic8(s);
break;
case 15:
tc6393xb_draw_graphic15(s);
break;
case 16:
tc6393xb_draw_graphic16(s);
break;
case 24:
tc6393xb_draw_graphic24(s);
break;
case 32:
tc6393xb_draw_graphic32(s);
break;
default:
printf("tc6393xb: unknown depth %d\n", ds_get_bits_per_pixel(s->ds));
return;
}
dpy_update(s->ds, 0, 0, s->scr_width, s->scr_height);
}
static void tc6393xb_draw_blank(TC6393xbState *s, int full_update)
{
int i, w;
uint8_t *d;
if (!full_update)
return;
w = s->scr_width * ((ds_get_bits_per_pixel(s->ds) + 7) >> 3);
d = ds_get_data(s->ds);
for(i = 0; i < s->scr_height; i++) {
memset(d, 0, w);
d += ds_get_linesize(s->ds);
}
dpy_update(s->ds, 0, 0, s->scr_width, s->scr_height);
}
static void tc6393xb_update_display(void *opaque)
{
TC6393xbState *s = opaque;
int full_update;
if (s->scr_width == 0 || s->scr_height == 0)
return;
full_update = 0;
if (s->blanked != s->blank) {
s->blanked = s->blank;
full_update = 1;
}
if (s->scr_width != ds_get_width(s->ds) || s->scr_height != ds_get_height(s->ds)) {
qemu_console_resize(s->ds, s->scr_width, s->scr_height);
full_update = 1;
}
if (s->blanked)
tc6393xb_draw_blank(s, full_update);
else
tc6393xb_draw_graphic(s, full_update);
}
static uint32_t tc6393xb_readb(void *opaque, target_phys_addr_t addr) {
TC6393xbState *s = opaque;
switch (addr >> 8) {
case 0:
return tc6393xb_scr_readb(s, addr & 0xff);
case 1:
return tc6393xb_nand_cfg_readb(s, addr & 0xff);
};
if ((addr &~0xff) == s->nand_phys && s->nand_enable) {
// return tc6393xb_nand_readb(s, addr & 0xff);
uint8_t d = tc6393xb_nand_readb(s, addr & 0xff);
// fprintf(stderr, "tc6393xb_nand: read at %08x: %02hhx\n", (uint32_t) addr, d);
return d;
}
// fprintf(stderr, "tc6393xb: unhandled read at %08x\n", (uint32_t) addr);
return 0;
}
static void tc6393xb_writeb(void *opaque, target_phys_addr_t addr, uint32_t value) {
TC6393xbState *s = opaque;
switch (addr >> 8) {
case 0:
tc6393xb_scr_writeb(s, addr & 0xff, value);
return;
case 1:
tc6393xb_nand_cfg_writeb(s, addr & 0xff, value);
return;
};
if ((addr &~0xff) == s->nand_phys && s->nand_enable)
tc6393xb_nand_writeb(s, addr & 0xff, value);
else
fprintf(stderr, "tc6393xb: unhandled write at %08x: %02x\n",
(uint32_t) addr, value & 0xff);
}
static uint32_t tc6393xb_readw(void *opaque, target_phys_addr_t addr)
{
return (tc6393xb_readb(opaque, addr) & 0xff) |
(tc6393xb_readb(opaque, addr + 1) << 8);
}
static uint32_t tc6393xb_readl(void *opaque, target_phys_addr_t addr)
{
return (tc6393xb_readb(opaque, addr) & 0xff) |
((tc6393xb_readb(opaque, addr + 1) & 0xff) << 8) |
((tc6393xb_readb(opaque, addr + 2) & 0xff) << 16) |
((tc6393xb_readb(opaque, addr + 3) & 0xff) << 24);
}
static void tc6393xb_writew(void *opaque, target_phys_addr_t addr, uint32_t value)
{
tc6393xb_writeb(opaque, addr, value);
tc6393xb_writeb(opaque, addr + 1, value >> 8);
}
static void tc6393xb_writel(void *opaque, target_phys_addr_t addr, uint32_t value)
{
tc6393xb_writeb(opaque, addr, value);
tc6393xb_writeb(opaque, addr + 1, value >> 8);
tc6393xb_writeb(opaque, addr + 2, value >> 16);
tc6393xb_writeb(opaque, addr + 3, value >> 24);
}
TC6393xbState *tc6393xb_init(uint32_t base, qemu_irq irq)
{
int iomemtype;
TC6393xbState *s;
CPUReadMemoryFunc * const tc6393xb_readfn[] = {
tc6393xb_readb,
tc6393xb_readw,
tc6393xb_readl,
};
CPUWriteMemoryFunc * const tc6393xb_writefn[] = {
tc6393xb_writeb,
tc6393xb_writew,
tc6393xb_writel,
};
s = (TC6393xbState *) qemu_mallocz(sizeof(TC6393xbState));
s->irq = irq;
s->gpio_in = qemu_allocate_irqs(tc6393xb_gpio_set, s, TC6393XB_GPIOS);
s->l3v = *qemu_allocate_irqs(tc6393xb_l3v, s, 1);
s->blanked = 1;
s->sub_irqs = qemu_allocate_irqs(tc6393xb_sub_irq, s, TC6393XB_NR_IRQS);
s->flash = nand_init(NAND_MFR_TOSHIBA, 0x76);
iomemtype = cpu_register_io_memory(tc6393xb_readfn,
tc6393xb_writefn, s);
cpu_register_physical_memory(base, 0x10000, iomemtype);
s->vram_addr = qemu_ram_alloc(NULL, "tc6393xb.vram", 0x100000);
s->vram_ptr = qemu_get_ram_ptr(s->vram_addr);
cpu_register_physical_memory(base + 0x100000, 0x100000, s->vram_addr);
s->scr_width = 480;
s->scr_height = 640;
s->ds = graphic_console_init(tc6393xb_update_display,
NULL, /* invalidate */
NULL, /* screen_dump */
NULL, /* text_update */
s);
return s;
}