qemu-e2k/hw/arm
Philippe Mathieu-Daudé 498661dd22 hw/arm/musicpal: Don't connect two qemu_irqs directly to the same input
The MusicPal board code connects both of the IRQ outputs of the UART
to the same INTC qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the INTC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).

This kind of wiring needs an explicitly created OR gate; add one.

Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
..
allwinner-a10.c hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers 2020-08-28 10:02:45 +01:00
allwinner-h3.c target-arm queue: 2020-08-28 15:14:40 +01:00
armsse.c hw/arm/armsse: Correct expansion MPC interrupt lines 2020-11-10 11:03:48 +00:00
armv7m.c load_elf: Remove unused address variables from callers 2020-09-25 16:52:08 -07:00
aspeed_ast2600.c hw/arm/aspeed: Map the UART5 device unconditionally 2020-09-18 09:04:36 +02:00
aspeed_soc.c hw/arm/aspeed: Map the UART5 device unconditionally 2020-09-18 09:04:36 +02:00
aspeed.c hw/arm/aspeed: Add the 3 front LEDs drived by the PCA9552 #1 2020-10-26 13:44:58 +01:00
bcm2835_peripherals.c hw/arm/bcm2835_peripherals: connect the UART clock 2020-10-27 11:10:44 +00:00
bcm2836.c hw/arm/bcm2836: Introduce the BCM2835 SoC 2020-10-27 11:10:44 +00:00
boot.c hw/arm/boot: fix SVE for EL3 direct kernel boot 2020-11-02 16:52:16 +00:00
collie.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
cubieboard.c qom: Use returned bool to check for failure, Coccinelle part 2020-07-10 15:18:08 +02:00
digic_boards.c qdev: Use returned bool to check for qdev_realize() etc. failure 2020-07-10 15:01:06 +02:00
digic.c error: Eliminate error_propagate() with Coccinelle, part 1 2020-07-10 15:18:08 +02:00
exynos4_boards.c
exynos4210.c qom: simplify object_find_property / object_class_find_property 2020-09-22 16:45:16 -04:00
fsl-imx6.c Add the ability to change the FEC PHY MDIO device number on i.MX6 processor 2020-07-13 14:36:08 +01:00
fsl-imx6ul.c qom: Put name parameter before value / visitor parameter 2020-07-10 15:18:08 +02:00
fsl-imx7.c Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processor 2020-07-13 14:36:08 +01:00
fsl-imx25.c Add the ability to change the FEC PHY MDIO device number on i.MX25 processor 2020-07-13 14:36:07 +01:00
fsl-imx31.c error: Eliminate error_propagate() with Coccinelle, part 1 2020-07-10 15:18:08 +02:00
gumstix.c
highbank.c hw/arm/highbank: Silence warnings about missing fallthrough statements 2020-10-27 10:44:03 +00:00
imx25_pdk.c qdev: Make qdev_prop_set_drive() match the other helpers 2020-06-23 16:07:07 +02:00
integratorcp.c qom: simplify object_find_property / object_class_find_property 2020-09-22 16:45:16 -04:00
Kconfig hw/arm/musicpal: Don't connect two qemu_irqs directly to the same input 2020-11-10 11:03:48 +00:00
kzm.c
mainstone.c
mcimx6ul-evk.c qom: Put name parameter before value / visitor parameter 2020-07-10 15:18:08 +02:00
mcimx7d-sabre.c qdev: Make qdev_prop_set_drive() match the other helpers 2020-06-23 16:07:07 +02:00
meson.build hw/arm: Add two NPCM7xx-based machines 2020-09-14 14:24:58 +01:00
microbit.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
mps2-tz.c Use OBJECT_DECLARE_TYPE when possible 2020-09-18 14:12:32 -04:00
mps2.c Use OBJECT_DECLARE_TYPE when possible 2020-09-18 14:12:32 -04:00
msf2-soc.c msf2-soc, stellaris: Don't wire up SYSRESETREQ 2020-08-03 17:55:03 +01:00
msf2-som.c qdev: Make qdev_prop_set_drive() match the other helpers 2020-06-23 16:07:07 +02:00
musca.c Use OBJECT_DECLARE_TYPE when possible 2020-09-18 14:12:32 -04:00
musicpal.c hw/arm/musicpal: Don't connect two qemu_irqs directly to the same input 2020-11-10 11:03:48 +00:00
netduino2.c hw/arm/netduino2, netduinoplus2: Set system_clock_scale 2020-08-03 17:55:03 +01:00
netduinoplus2.c hw/arm/netduino2, netduinoplus2: Set system_clock_scale 2020-08-03 17:55:03 +01:00
npcm7xx_boards.c hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj 2020-09-14 14:24:59 +01:00
npcm7xx.c hw/gpio: Add GPIO model for Nuvoton NPCM7xx 2020-10-27 11:10:32 +00:00
nrf51_soc.c hw/arm/nrf51_soc: Set system_clock_scale 2020-08-03 17:55:31 +01:00
nseries.c hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup() 2020-11-10 11:03:48 +00:00
omap1.c hw/arm/omap1:Remove redundant statement in omap_clkdsp_read() 2020-09-01 11:53:44 +02:00
omap2.c
omap_sx1.c
orangepi.c allwinner-h3: Rename memmap enum constants 2020-08-27 14:04:54 -04:00
palm.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
pxa2xx_gpio.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
pxa2xx_pic.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
pxa2xx.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
raspi.c hw/arm/raspi: Add the Raspberry Pi 3 model A+ 2020-10-27 11:10:44 +00:00
realview.c qom: simplify object_find_property / object_class_find_property 2020-09-22 16:45:16 -04:00
sabrelite.c qdev: Make qdev_prop_set_drive() match the other helpers 2020-06-23 16:07:07 +02:00
sbsa-ref.c hw/arm/sbsa-ref: add SBSA watchdog device 2020-10-27 11:10:44 +00:00
smmu-common.c hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 support 2020-08-24 10:02:06 +01:00
smmu-internal.h hw/arm/smmu-common: Manage IOTLB block entries 2020-08-24 10:02:06 +01:00
smmuv3-internal.h hw/arm/smmuv3: Advertise SMMUv3.2 range invalidation 2020-08-24 10:02:06 +01:00
smmuv3.c hw/arm/smmuv3: Fix potential integer overflow (CID 1432363) 2020-11-02 16:52:16 +00:00
spitz.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
stellaris.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00
stm32f205_soc.c hw/misc/stm32f2xx_syscfg: Remove extraneous IRQ 2020-11-10 11:03:48 +00:00
stm32f405_soc.c error: Eliminate error_propagate() with Coccinelle, part 1 2020-07-10 15:18:08 +02:00
strongarm.c hw/arm/strongarm: Fix 'time to transmit a char' unit comment 2020-10-20 16:12:00 +01:00
strongarm.h
sysbus-fdt.c
tosa.c hw/arm/tosa: Replace fprintf() calls by LED devices 2020-10-26 13:44:58 +01:00
trace-events arm/trace: Fix hex printing 2020-10-27 11:10:44 +00:00
trace.h trace: switch position of headers to what Meson requires 2020-08-21 06:18:24 -04:00
versatilepb.c qom: simplify object_find_property / object_class_find_property 2020-09-22 16:45:16 -04:00
vexpress.c qom: simplify object_find_property / object_class_find_property 2020-09-22 16:45:16 -04:00
virt-acpi-build.c arm: use acpi_dsdt_add_gpex 2020-09-30 11:29:56 +02:00
virt.c pc-dimm: Drop @errp argument of pc_dimm_plug() 2020-10-28 01:08:53 +11:00
xilinx_zynq.c qom: simplify object_find_property / object_class_find_property 2020-09-22 16:45:16 -04:00
xlnx-versal-virt.c hw/arm: fix min_cpus for xlnx-versal-virt platform 2020-10-27 10:44:03 +00:00
xlnx-versal.c hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 2020-09-09 15:54:18 -07:00
xlnx-zcu102.c xlnx-zcu102: Register properties as class properties 2020-09-22 16:48:29 -04:00
xlnx-zynqmp.c hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 2020-09-09 15:54:18 -07:00
z2.c Use OBJECT_DECLARE_SIMPLE_TYPE when possible 2020-09-18 14:12:32 -04:00