OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
49e3fdd7f2
qemu-e2k/hw/usb-ccid.c

1409 lines
44 KiB
C
Raw Blame History

/*
* Copyright (C) 2011 Red Hat, Inc.
*
* CCID Device emulation
*
* Written by Alon Levy, with contributions from Robert Relyea.
*
* Based on usb-serial.c, see it's copyright and attributions below.
*
* This work is licensed under the terms of the GNU GPL, version 2.1 or later.
* See the COPYING file in the top-level directory.
* ------- (original copyright & attribution for usb-serial.c below) --------
* Copyright (c) 2006 CodeSourcery.
* Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org>
* Written by Paul Brook, reused for FTDI by Samuel Thibault,
*/
/*
* References:
*
* CCID Specification Revision 1.1 April 22nd 2005
* "Universal Serial Bus, Device Class: Smart Card"
* Specification for Integrated Circuit(s) Cards Interface Devices
*
* Endianness note: from the spec (1.3)
* "Fields that are larger than a byte are stored in little endian"
*
* KNOWN BUGS
* 1. remove/insert can sometimes result in removed state instead of inserted.
* This is a result of the following:
* symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen
* when a short packet is sent, as seen in uhci-usb.c, resulting from a urb
* from the guest requesting SPD and us returning a smaller packet.
* Not sure which messages trigger this.
*/
#include "qemu-common.h"
#include "qemu-error.h"
#include "usb.h"
#include "monitor.h"
#include "hw/ccid.h"
#define DPRINTF(s, lvl, fmt, ...) \
do { \
if (lvl <= s->debug) { \
printf("usb-ccid: " fmt , ## __VA_ARGS__); \
} \
} while (0)
#define D_WARN 1
#define D_INFO 2
#define D_MORE_INFO 3
#define D_VERBOSE 4
#define CCID_DEV_NAME "usb-ccid"
/*
* The two options for variable sized buffers:
* make them constant size, for large enough constant,
* or handle the migration complexity - VMState doesn't handle this case.
* sizes are expected never to be exceeded, unless guest misbehaves.
*/
#define BULK_OUT_DATA_SIZE 65536
#define PENDING_ANSWERS_NUM 128
#define BULK_IN_BUF_SIZE 384
#define BULK_IN_PENDING_NUM 8
#define InterfaceOutClass \
((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)<<8)
#define InterfaceInClass \
((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)<<8)
#define CCID_MAX_PACKET_SIZE 64
#define CCID_CONTROL_ABORT 0x1
#define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2
#define CCID_CONTROL_GET_DATA_RATES 0x3
#define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID"
#define CCID_VENDOR_DESCRIPTION "QEMU " QEMU_VERSION
#define CCID_INTERFACE_NAME "CCID Interface"
#define CCID_SERIAL_NUMBER_STRING "1"
/*
* Using Gemplus Vendor and Product id
* Effect on various drivers:
* usbccid.sys (winxp, others untested) is a class driver so it doesn't care.
* linux has a number of class drivers, but openct filters based on
* vendor/product (/etc/openct.conf under fedora), hence Gemplus.
*/
#define CCID_VENDOR_ID 0x08e6
#define CCID_PRODUCT_ID 0x4433
#define CCID_DEVICE_VERSION 0x0000
/*
* BULK_OUT messages from PC to Reader
* Defined in CCID Rev 1.1 6.1 (page 26)
*/
#define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62
#define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63
#define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65
#define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f
#define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c
#define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d
#define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61
#define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b
#define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e
#define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a
#define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69
#define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71
#define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72
#define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73
/*
* BULK_IN messages from Reader to PC
* Defined in CCID Rev 1.1 6.2 (page 48)
*/
#define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80
#define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81
#define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82
#define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83
#define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84
/*
* INTERRUPT_IN messages from Reader to PC
* Defined in CCID Rev 1.1 6.3 (page 56)
*/
#define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50
#define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51
/*
* Endpoints for CCID - addresses are up to us to decide.
* To support slot insertion and removal we must have an interrupt in ep
* in addition we need a bulk in and bulk out ep
* 5.2, page 20
*/
#define CCID_INT_IN_EP 1
#define CCID_BULK_IN_EP 2
#define CCID_BULK_OUT_EP 3
/* bmSlotICCState masks */
#define SLOT_0_STATE_MASK 1
#define SLOT_0_CHANGED_MASK 2
/* Status codes that go in bStatus (see 6.2.6) */
enum {
ICC_STATUS_PRESENT_ACTIVE = 0,
ICC_STATUS_PRESENT_INACTIVE,
ICC_STATUS_NOT_PRESENT
};
enum {
COMMAND_STATUS_NO_ERROR = 0,
COMMAND_STATUS_FAILED,
COMMAND_STATUS_TIME_EXTENSION_REQUIRED
};
/* Error codes that go in bError (see 6.2.6) */
enum {
ERROR_CMD_NOT_SUPPORTED = 0,
ERROR_CMD_ABORTED = -1,
ERROR_ICC_MUTE = -2,
ERROR_XFR_PARITY_ERROR = -3,
ERROR_XFR_OVERRUN = -4,
ERROR_HW_ERROR = -5,
};
/* 6.2.6 RDR_to_PC_SlotStatus definitions */
enum {
CLOCK_STATUS_RUNNING = 0,
/*
* 0 - Clock Running, 1 - Clock stopped in State L, 2 - H,
* 3 - unknown state. rest are RFU
*/
};
typedef struct __attribute__ ((__packed__)) CCID_Header {
uint8_t bMessageType;
uint32_t dwLength;
uint8_t bSlot;
uint8_t bSeq;
} CCID_Header;
typedef struct __attribute__ ((__packed__)) CCID_BULK_IN {
CCID_Header hdr;
uint8_t bStatus; /* Only used in BULK_IN */
uint8_t bError; /* Only used in BULK_IN */
} CCID_BULK_IN;
typedef struct __attribute__ ((__packed__)) CCID_SlotStatus {
CCID_BULK_IN b;
uint8_t bClockStatus;
} CCID_SlotStatus;
typedef struct __attribute__ ((__packed__)) CCID_Parameter {
CCID_BULK_IN b;
uint8_t bProtocolNum;
uint8_t abProtocolDataStructure[0];
} CCID_Parameter;
typedef struct __attribute__ ((__packed__)) CCID_DataBlock {
CCID_BULK_IN b;
uint8_t bChainParameter;
uint8_t abData[0];
} CCID_DataBlock;
/* 6.1.4 PC_to_RDR_XfrBlock */
typedef struct __attribute__ ((__packed__)) CCID_XferBlock {
CCID_Header hdr;
uint8_t bBWI; /* Block Waiting Timeout */
uint16_t wLevelParameter; /* XXX currently unused */
uint8_t abData[0];
} CCID_XferBlock;
typedef struct __attribute__ ((__packed__)) CCID_IccPowerOn {
CCID_Header hdr;
uint8_t bPowerSelect;
uint16_t abRFU;
} CCID_IccPowerOn;
typedef struct __attribute__ ((__packed__)) CCID_IccPowerOff {
CCID_Header hdr;
uint16_t abRFU;
} CCID_IccPowerOff;
typedef struct __attribute__ ((__packed__)) CCID_SetParameters {
CCID_Header hdr;
uint8_t bProtocolNum;
uint16_t abRFU;
uint8_t abProtocolDataStructure[0];
} CCID_SetParameters;
typedef struct CCID_Notify_Slot_Change {
uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */
uint8_t bmSlotICCState;
} CCID_Notify_Slot_Change;
/* used for DataBlock response to XferBlock */
typedef struct Answer {
uint8_t slot;
uint8_t seq;
} Answer;
/* pending BULK_IN messages */
typedef struct BulkIn {
uint8_t data[BULK_IN_BUF_SIZE];
uint32_t len;
uint32_t pos;
} BulkIn;
enum {
MIGRATION_NONE,
MIGRATION_MIGRATED,
};
typedef struct CCIDBus {
BusState qbus;
} CCIDBus;
#define MAX_PROTOCOL_SIZE 7
/*
* powered - defaults to true, changed by PowerOn/PowerOff messages
*/
typedef struct USBCCIDState {
USBDevice dev;
CCIDBus bus;
CCIDCardState *card;
CCIDCardInfo *cardinfo; /* caching the info pointer */
BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */
uint32_t bulk_in_pending_start;
uint32_t bulk_in_pending_end; /* first free */
uint32_t bulk_in_pending_num;
BulkIn *current_bulk_in;
uint8_t bulk_out_data[BULK_OUT_DATA_SIZE];
uint32_t bulk_out_pos;
uint64_t last_answer_error;
Answer pending_answers[PENDING_ANSWERS_NUM];
uint32_t pending_answers_start;
uint32_t pending_answers_end;
uint32_t pending_answers_num;
uint8_t bError;
uint8_t bmCommandStatus;
uint8_t bProtocolNum;
uint8_t abProtocolDataStructure[MAX_PROTOCOL_SIZE];
uint32_t ulProtocolDataStructureSize;
uint32_t state_vmstate;
uint32_t migration_target_ip;
uint16_t migration_target_port;
uint8_t migration_state;
uint8_t bmSlotICCState;
uint8_t powered;
uint8_t notify_slot_change;
uint8_t debug;
} USBCCIDState;
/*
* CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9,
* "USB Device Framework", section 9.6.1, in the Universal Serial Bus
* Specification.
*
* This device implemented based on the spec and with an Athena Smart Card
* Reader as reference:
* 0dc3:1004 Athena Smartcard Solutions, Inc.
*/
static const uint8_t qemu_ccid_dev_descriptor[] = {
0x12, /* u8 bLength; */
USB_DT_DEVICE, /* u8 bDescriptorType; Device */
0x10, 0x01, /* u16 bcdUSB; v1.1 */
0x00, /* u8 bDeviceClass; */
0x00, /* u8 bDeviceSubClass; */
0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */
0x40, /* u8 bMaxPacketSize0; 8 Bytes (valid: 8,16,32,64) */
/* Vendor and product id are arbitrary. */
/* u16 idVendor */
CCID_VENDOR_ID & 0xff, CCID_VENDOR_ID >> 8,
/* u16 idProduct */
CCID_PRODUCT_ID & 0xff, CCID_PRODUCT_ID >> 8,
/* u16 bcdDevice */
CCID_DEVICE_VERSION & 0xff, CCID_DEVICE_VERSION >> 8,
0x01, /* u8 iManufacturer; */
0x02, /* u8 iProduct; */
0x03, /* u8 iSerialNumber; */
0x01, /* u8 bNumConfigurations; */
};
static const uint8_t qemu_ccid_config_descriptor[] = {
/* one configuration */
0x09, /* u8 bLength; */
USB_DT_CONFIG, /* u8 bDescriptorType; Configuration */
0x5d, 0x00, /* u16 wTotalLength; 9+9+54+7+7+7 */
0x01, /* u8 bNumInterfaces; (1) */
0x01, /* u8 bConfigurationValue; */
0x00, /* u8 iConfiguration; */
0xe0, /* u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
100/2, /* u8 MaxPower; 50 == 100mA */
/* one interface */
0x09, /* u8 if_bLength; */
USB_DT_INTERFACE, /* u8 if_bDescriptorType; Interface */
0x00, /* u8 if_bInterfaceNumber; */
0x00, /* u8 if_bAlternateSetting; */
0x03, /* u8 if_bNumEndpoints; */
0x0b, /* u8 if_bInterfaceClass; Smart Card Device Class */
0x00, /* u8 if_bInterfaceSubClass; Subclass code */
0x00, /* u8 if_bInterfaceProtocol; Protocol code */
0x04, /* u8 if_iInterface; Index of string descriptor */
/* Smart Card Device Class Descriptor */
0x36, /* u8 bLength; */
0x21, /* u8 bDescriptorType; Functional */
0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */
0x00, /*
* u8 bMaxSlotIndex; The index of the highest available
* slot on this device. All slots are consecutive starting
* at 00h.
*/
0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */
0x03, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
/* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
0xa0, 0x0f, 0x00, 0x00,
/* u32 dwMaximumClock; */
0x00, 0x00, 0x01, 0x00,
0x00, /* u8 bNumClockSupported; *
* 0 means just the default and max. */
/* u32 dwDataRate ;bps. 9600 == 00002580h */
0x80, 0x25, 0x00, 0x00,
/* u32 dwMaxDataRate ; 11520 bps == 0001C200h */
0x00, 0xC2, 0x01, 0x00,
0x00, /* u8 bNumDataRatesSupported; 00 means all rates between
* default and max */
/* u32 dwMaxIFSD; *
* maximum IFSD supported by CCID for protocol *
* T=1 (Maximum seen from various cards) */
0xfe, 0x00, 0x00, 0x00,
/* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */
0x00, 0x00, 0x00, 0x00,
/* u32 dwMechanical; 0 - no special characteristics. */
0x00, 0x00, 0x00, 0x00,
/*
* u32 dwFeatures;
* 0 - No special characteristics
* + 2 Automatic parameter configuration based on ATR data
* + 4 Automatic activation of ICC on inserting
* + 8 Automatic ICC voltage selection
* + 10 Automatic ICC clock frequency change
* + 20 Automatic baud rate change
* + 40 Automatic parameters negotiation made by the CCID
* + 80 automatic PPS made by the CCID
* 100 CCID can set ICC in clock stop mode
* 200 NAD value other then 00 accepted (T=1 protocol)
* + 400 Automatic IFSD exchange as first exchange (T=1)
* One of the following only:
* + 10000 TPDU level exchanges with CCID
* 20000 Short APDU level exchange with CCID
* 40000 Short and Extended APDU level exchange with CCID
*
* + 100000 USB Wake up signaling supported on card
* insertion and removal. Must set bit 5 in bmAttributes
* in Configuration descriptor if 100000 is set.
*/
0xfe, 0x04, 0x11, 0x00,
/*
* u32 dwMaxCCIDMessageLength; For extended APDU in
* [261 + 10 , 65544 + 10]. Otherwise the minimum is
* wMaxPacketSize of the Bulk-OUT endpoint
*/
0x12, 0x00, 0x01, 0x00,
0xFF, /*
* u8 bClassGetResponse; Significant only for CCID that
* offers an APDU level for exchanges. Indicates the
* default class value used by the CCID when it sends a
* Get Response command to perform the transportation of
* an APDU by T=0 protocol
* FFh indicates that the CCID echos the class of the APDU.
*/
0xFF, /*
* u8 bClassEnvelope; EAPDU only. Envelope command for
* T=0
*/
0x00, 0x00, /*
* u16 wLcdLayout; XXYY Number of lines (XX) and chars per
* line for LCD display used for PIN entry. 0000 - no LCD
*/
0x01, /*
* u8 bPINSupport; 01h PIN Verification,
* 02h PIN Modification
*/
0x01, /* u8 bMaxCCIDBusySlots; */
/* Interrupt-IN endpoint */
0x07, /* u8 ep_bLength; */
/* u8 ep_bDescriptorType; Endpoint */
USB_DT_ENDPOINT,
/* u8 ep_bEndpointAddress; IN Endpoint 1 */
0x80 | CCID_INT_IN_EP,
0x03, /* u8 ep_bmAttributes; Interrupt */
/* u16 ep_wMaxPacketSize; */
CCID_MAX_PACKET_SIZE & 0xff, (CCID_MAX_PACKET_SIZE >> 8),
0xff, /* u8 ep_bInterval; */
/* Bulk-In endpoint */
0x07, /* u8 ep_bLength; */
/* u8 ep_bDescriptorType; Endpoint */
USB_DT_ENDPOINT,
/* u8 ep_bEndpointAddress; IN Endpoint 2 */
0x80 | CCID_BULK_IN_EP,
0x02, /* u8 ep_bmAttributes; Bulk */
0x40, 0x00, /* u16 ep_wMaxPacketSize; */
0x00, /* u8 ep_bInterval; */
/* Bulk-Out endpoint */
0x07, /* u8 ep_bLength; */
/* u8 ep_bDescriptorType; Endpoint */
USB_DT_ENDPOINT,
/* u8 ep_bEndpointAddress; OUT Endpoint 3 */
CCID_BULK_OUT_EP,
0x02, /* u8 ep_bmAttributes; Bulk */
0x40, 0x00, /* u16 ep_wMaxPacketSize; */
0x00, /* u8 ep_bInterval; */
};
static bool ccid_has_pending_answers(USBCCIDState *s)
{
return s->pending_answers_num > 0;
}
static void ccid_clear_pending_answers(USBCCIDState *s)
{
s->pending_answers_num = 0;
s->pending_answers_start = 0;
s->pending_answers_end = 0;
}
static void ccid_print_pending_answers(USBCCIDState *s)
{
Answer *answer;
int i, count;
DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:");
if (!ccid_has_pending_answers(s)) {
DPRINTF(s, D_VERBOSE, " empty\n");
return;
}
for (i = s->pending_answers_start, count = s->pending_answers_num ;
count > 0; count--, i++) {
answer = &s->pending_answers[i % PENDING_ANSWERS_NUM];
if (count == 1) {
DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq);
} else {
DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq);
}
}
}
static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr)
{
Answer *answer;
assert(s->pending_answers_num < PENDING_ANSWERS_NUM);
s->pending_answers_num++;
answer =
&s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM];
answer->slot = hdr->bSlot;
answer->seq = hdr->bSeq;
ccid_print_pending_answers(s);
}
static void ccid_remove_pending_answer(USBCCIDState *s,
uint8_t *slot, uint8_t *seq)
{
Answer *answer;
assert(s->pending_answers_num > 0);
s->pending_answers_num--;
answer =
&s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM];
*slot = answer->slot;
*seq = answer->seq;
ccid_print_pending_answers(s);
}
static void ccid_bulk_in_clear(USBCCIDState *s)
{
s->bulk_in_pending_start = 0;
s->bulk_in_pending_end = 0;
s->bulk_in_pending_num = 0;
}
static void ccid_bulk_in_release(USBCCIDState *s)
{
assert(s->current_bulk_in != NULL);
s->current_bulk_in->pos = 0;
s->current_bulk_in = NULL;
}
static void ccid_bulk_in_get(USBCCIDState *s)
{
if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) {
return;
}
assert(s->bulk_in_pending_num > 0);
s->bulk_in_pending_num--;
s->current_bulk_in =
&s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM];
}
static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len)
{
BulkIn *bulk_in;
DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len);
/* look for an existing element */
if (len > BULK_IN_BUF_SIZE) {
DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). "
"discarding message.\n",
__func__, len, BULK_IN_BUF_SIZE);
return NULL;
}
if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) {
DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. "
"discarding message.\n", __func__);
return NULL;
}
bulk_in =
&s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM];
s->bulk_in_pending_num++;
bulk_in->len = len;
return bulk_in->data;
}
static void ccid_reset(USBCCIDState *s)
{
ccid_bulk_in_clear(s);
ccid_clear_pending_answers(s);
}
static void ccid_detach(USBCCIDState *s)
{
ccid_reset(s);
}
static void ccid_handle_reset(USBDevice *dev)
{
USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
DPRINTF(s, 1, "Reset\n");
ccid_reset(s);
}
static int ccid_handle_control(USBDevice *dev, USBPacket *p, int request,
int value, int index, int length, uint8_t *data)
{
USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
int ret = 0;
DPRINTF(s, 1, "got control %x, value %x\n", request, value);
switch (request) {
case DeviceRequest | USB_REQ_GET_STATUS:
data[0] = (1 << USB_DEVICE_SELF_POWERED) |
(dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
data[1] = 0x00;
ret = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (value == USB_DEVICE_REMOTE_WAKEUP) {
dev->remote_wakeup = 0;
} else {
goto fail;
}
ret = 0;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
if (value == USB_DEVICE_REMOTE_WAKEUP) {
dev->remote_wakeup = 1;
} else {
goto fail;
}
ret = 0;
break;
case DeviceOutRequest | USB_REQ_SET_ADDRESS:
dev->addr = value;
ret = 0;
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (value >> 8) {
case USB_DT_DEVICE:
memcpy(data, qemu_ccid_dev_descriptor,
sizeof(qemu_ccid_dev_descriptor));
ret = sizeof(qemu_ccid_dev_descriptor);
break;
case USB_DT_CONFIG:
memcpy(data, qemu_ccid_config_descriptor,
sizeof(qemu_ccid_config_descriptor));
ret = sizeof(qemu_ccid_config_descriptor);
break;
case USB_DT_STRING:
switch (value & 0xff) {
case 0:
/* language ids */
data[0] = 4;
data[1] = 3;
data[2] = 0x09;
data[3] = 0x04;
ret = 4;
break;
case 1:
/* vendor description */
ret = set_usb_string(data, CCID_VENDOR_DESCRIPTION);
break;
case 2:
/* product description */
ret = set_usb_string(data, CCID_PRODUCT_DESCRIPTION);
break;
case 3:
/* serial number */
ret = set_usb_string(data, CCID_SERIAL_NUMBER_STRING);
break;
case 4:
/* interface name */
ret = set_usb_string(data, CCID_INTERFACE_NAME);
break;
default:
goto fail;
}
break;
default:
goto fail;
}
break;
case DeviceRequest | USB_REQ_GET_CONFIGURATION:
data[0] = 1;
ret = 1;
break;
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
/* Only one configuration - we just ignore the request */
ret = 0;
break;
case DeviceRequest | USB_REQ_GET_INTERFACE:
data[0] = 0;
ret = 1;
break;
case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
ret = 0;
break;
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
ret = 0;
break;
/* Class specific requests. */
case InterfaceOutClass | CCID_CONTROL_ABORT:
DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n");
ret = USB_RET_STALL;
break;
case InterfaceInClass | CCID_CONTROL_GET_CLOCK_FREQUENCIES:
DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n");
ret = USB_RET_STALL;
break;
case InterfaceInClass | CCID_CONTROL_GET_DATA_RATES:
DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n");
ret = USB_RET_STALL;
break;
default:
fail:
DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n",
request, value);
ret = USB_RET_STALL;
break;
}
return ret;
}
static bool ccid_card_inserted(USBCCIDState *s)
{
return s->bmSlotICCState & SLOT_0_STATE_MASK;
}
static uint8_t ccid_card_status(USBCCIDState *s)
{
return ccid_card_inserted(s)
? (s->powered ?
ICC_STATUS_PRESENT_ACTIVE
: ICC_STATUS_PRESENT_INACTIVE
)
: ICC_STATUS_NOT_PRESENT;
}
static uint8_t ccid_calc_status(USBCCIDState *s)
{
/*
* page 55, 6.2.6, calculation of bStatus from bmICCStatus and
* bmCommandStatus
*/
uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6);
DPRINTF(s, D_VERBOSE, "status = %d\n", ret);
return ret;
}
static void ccid_reset_error_status(USBCCIDState *s)
{
s->bError = ERROR_CMD_NOT_SUPPORTED;
s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
}
static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv)
{
CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus));
if (h == NULL) {
return;
}
h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus;
h->b.hdr.dwLength = 0;
h->b.hdr.bSlot = recv->bSlot;
h->b.hdr.bSeq = recv->bSeq;
h->b.bStatus = ccid_calc_status(s);
h->b.bError = s->bError;
h->bClockStatus = CLOCK_STATUS_RUNNING;
ccid_reset_error_status(s);
}
static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv)
{
CCID_Parameter *h;
uint32_t len = s->ulProtocolDataStructureSize;
h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len);
if (h == NULL) {
return;
}
h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters;
h->b.hdr.dwLength = 0;
h->b.hdr.bSlot = recv->bSlot;
h->b.hdr.bSeq = recv->bSeq;
h->b.bStatus = ccid_calc_status(s);
h->b.bError = s->bError;
h->bProtocolNum = s->bProtocolNum;
memcpy(h->abProtocolDataStructure, s->abProtocolDataStructure, len);
ccid_reset_error_status(s);
}
static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq,
const uint8_t *data, uint32_t len)
{
CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len);
if (p == NULL) {
return;
}
p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock;
p->b.hdr.dwLength = cpu_to_le32(len);
p->b.hdr.bSlot = slot;
p->b.hdr.bSeq = seq;
p->b.bStatus = ccid_calc_status(s);
p->b.bError = s->bError;
if (p->b.bError) {
DPRINTF(s, D_VERBOSE, "error %d", p->b.bError);
}
memcpy(p->abData, data, len);
ccid_reset_error_status(s);
}
static void ccid_write_data_block_answer(USBCCIDState *s,
const uint8_t *data, uint32_t len)
{
uint8_t seq;
uint8_t slot;
if (!ccid_has_pending_answers(s)) {
abort();
}
ccid_remove_pending_answer(s, &slot, &seq);
ccid_write_data_block(s, slot, seq, data, len);
}
static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv)
{
const uint8_t *atr = NULL;
uint32_t len = 0;
if (s->card) {
atr = s->cardinfo->get_atr(s->card, &len);
}
ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len);
}
static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv)
{
CCID_SetParameters *ph = (CCID_SetParameters *) recv;
uint32_t len = 0;
if ((ph->bProtocolNum & 3) == 0) {
len = 5;
}
if ((ph->bProtocolNum & 3) == 1) {
len = 7;
}
if (len == 0) {
s->bmCommandStatus = COMMAND_STATUS_FAILED;
s->bError = 7; /* Protocol invalid or not supported */
return;
}
s->bProtocolNum = ph->bProtocolNum;
memcpy(s->abProtocolDataStructure, ph->abProtocolDataStructure, len);
s->ulProtocolDataStructureSize = len;
DPRINTF(s, 1, "%s: using len %d\n", __func__, len);
}
/*
* must be 5 bytes for T=0, 7 bytes for T=1
* See page 52
*/
static const uint8_t abDefaultProtocolDataStructure[7] = {
0x77, 0x00, 0x00, 0x00, 0x00, 0xfe /*IFSC*/, 0x00 /*NAD*/ };
static void ccid_reset_parameters(USBCCIDState *s)
{
uint32_t len = sizeof(abDefaultProtocolDataStructure);
s->bProtocolNum = 1; /* T=1 */
s->ulProtocolDataStructureSize = len;
memcpy(s->abProtocolDataStructure, abDefaultProtocolDataStructure, len);
}
static void ccid_report_error_failed(USBCCIDState *s, uint8_t error)
{
s->bmCommandStatus = COMMAND_STATUS_FAILED;
s->bError = error;
}
/* NOTE: only a single slot is supported (SLOT_0) */
static void ccid_on_slot_change(USBCCIDState *s, bool full)
{
/* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */
uint8_t current = s->bmSlotICCState;
if (full) {
s->bmSlotICCState |= SLOT_0_STATE_MASK;
} else {
s->bmSlotICCState &= ~SLOT_0_STATE_MASK;
}
if (current != s->bmSlotICCState) {
s->bmSlotICCState |= SLOT_0_CHANGED_MASK;
}
s->notify_slot_change = true;
}
static void ccid_write_data_block_error(
USBCCIDState *s, uint8_t slot, uint8_t seq)
{
ccid_write_data_block(s, slot, seq, NULL, 0);
}
static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv)
{
uint32_t len;
if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) {
DPRINTF(s, 1,
"usb-ccid: not sending apdu to client, no card connected\n");
ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq);
return;
}
len = le32_to_cpu(recv->hdr.dwLength);
DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__,
recv->hdr.bSeq, len);
ccid_add_pending_answer(s, (CCID_Header *)recv);
if (s->card) {
s->cardinfo->apdu_from_guest(s->card, recv->abData, len);
} else {
DPRINTF(s, D_WARN, "warning: discarded apdu\n");
}
}
/*
* Handle a single USB_TOKEN_OUT, return value returned to guest.
* Return value:
* 0 - all ok
* USB_RET_STALL - failed to handle packet
*/
static int ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p)
{
CCID_Header *ccid_header;
if (p->len + s->bulk_out_pos > BULK_OUT_DATA_SIZE) {
return USB_RET_STALL;
}
ccid_header = (CCID_Header *)s->bulk_out_data;
memcpy(s->bulk_out_data + s->bulk_out_pos, p->data, p->len);
s->bulk_out_pos += p->len;
if (p->len == CCID_MAX_PACKET_SIZE) {
DPRINTF(s, D_VERBOSE,
"usb-ccid: bulk_in: expecting more packets (%d/%d)\n",
p->len, ccid_header->dwLength);
return 0;
}
if (s->bulk_out_pos < 10) {
DPRINTF(s, 1,
"%s: bad USB_TOKEN_OUT length, should be at least 10 bytes\n",
__func__);
} else {
DPRINTF(s, D_MORE_INFO, "%s %x\n", __func__, ccid_header->bMessageType);
switch (ccid_header->bMessageType) {
case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus:
ccid_write_slot_status(s, ccid_header);
break;
case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn:
DPRINTF(s, 1, "PowerOn: %d\n",
((CCID_IccPowerOn *)(ccid_header))->bPowerSelect);
s->powered = true;
if (!ccid_card_inserted(s)) {
ccid_report_error_failed(s, ERROR_ICC_MUTE);
}
/* atr is written regardless of error. */
ccid_write_data_block_atr(s, ccid_header);
break;
case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff:
DPRINTF(s, 1, "PowerOff\n");
ccid_reset_error_status(s);
s->powered = false;
ccid_write_slot_status(s, ccid_header);
break;
case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock:
ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data);
break;
case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters:
ccid_reset_error_status(s);
ccid_set_parameters(s, ccid_header);
ccid_write_parameters(s, ccid_header);
break;
case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters:
ccid_reset_error_status(s);
ccid_reset_parameters(s);
ccid_write_parameters(s, ccid_header);
break;
case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters:
ccid_reset_error_status(s);
ccid_write_parameters(s, ccid_header);
break;
default:
DPRINTF(s, 1,
"handle_data: ERROR: unhandled message type %Xh\n",
ccid_header->bMessageType);
/*
* The caller is expecting the device to respond, tell it we
* don't support the operation.
*/
ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED);
ccid_write_slot_status(s, ccid_header);
break;
}
}
s->bulk_out_pos = 0;
return 0;
}
static int ccid_bulk_in_copy_to_guest(USBCCIDState *s, uint8_t *data, int len)
{
int ret = 0;
assert(len > 0);
ccid_bulk_in_get(s);
if (s->current_bulk_in != NULL) {
ret = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, len);
memcpy(data, s->current_bulk_in->data + s->current_bulk_in->pos, ret);
s->current_bulk_in->pos += ret;
if (s->current_bulk_in->pos == s->current_bulk_in->len) {
ccid_bulk_in_release(s);
}
} else {
/* return when device has no data - usb 2.0 spec Table 8-4 */
ret = USB_RET_NAK;
}
if (ret > 0) {
DPRINTF(s, D_MORE_INFO,
"%s: %d/%d req/act to guest (BULK_IN)\n", __func__, len, ret);
}
if (ret != USB_RET_NAK && ret < len) {
DPRINTF(s, 1,
"%s: returning short (EREMOTEIO) %d < %d\n", __func__, ret, len);
}
return ret;
}
static int ccid_handle_data(USBDevice *dev, USBPacket *p)
{
USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
int ret = 0;
uint8_t *data = p->data;
int len = p->len;
switch (p->pid) {
case USB_TOKEN_OUT:
ret = ccid_handle_bulk_out(s, p);
break;
case USB_TOKEN_IN:
switch (p->devep & 0xf) {
case CCID_BULK_IN_EP:
if (!len) {
ret = USB_RET_NAK;
} else {
ret = ccid_bulk_in_copy_to_guest(s, data, len);
}
break;
case CCID_INT_IN_EP:
if (s->notify_slot_change) {
/* page 56, RDR_to_PC_NotifySlotChange */
data[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange;
data[1] = s->bmSlotICCState;
ret = 2;
s->notify_slot_change = false;
s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK;
DPRINTF(s, D_INFO,
"handle_data: int_in: notify_slot_change %X, "
"requested len %d\n",
s->bmSlotICCState, len);
}
break;
default:
DPRINTF(s, 1, "Bad endpoint\n");
break;
}
break;
default:
DPRINTF(s, 1, "Bad token\n");
ret = USB_RET_STALL;
break;
}
return ret;
}
static void ccid_handle_destroy(USBDevice *dev)
{
USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
ccid_bulk_in_clear(s);
}
static void ccid_flush_pending_answers(USBCCIDState *s)
{
while (ccid_has_pending_answers(s)) {
ccid_write_data_block_answer(s, NULL, 0);
}
}
static Answer *ccid_peek_next_answer(USBCCIDState *s)
{
return s->pending_answers_num == 0
? NULL
: &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM];
}
static void ccid_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)
{
CCIDCardState *card = DO_UPCAST(CCIDCardState, qdev, qdev);
CCIDCardInfo *info = DO_UPCAST(CCIDCardInfo, qdev, qdev->info);
if (info->print) {
info->print(mon, card, indent);
}
}
static struct BusInfo ccid_bus_info = {
.name = "ccid-bus",
.size = sizeof(CCIDBus),
.print_dev = ccid_bus_dev_print,
.props = (Property[]) {
DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0),
DEFINE_PROP_END_OF_LIST(),
}
};
void ccid_card_send_apdu_to_guest(CCIDCardState *card,
uint8_t *apdu, uint32_t len)
{
USBCCIDState *s = DO_UPCAST(USBCCIDState, dev.qdev,
card->qdev.parent_bus->parent);
Answer *answer;
if (!ccid_has_pending_answers(s)) {
DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n");
return;
}
s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
answer = ccid_peek_next_answer(s);
if (answer == NULL) {
abort();
}
DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n",
len, answer->seq, answer->slot);
ccid_write_data_block_answer(s, apdu, len);
}
void ccid_card_card_removed(CCIDCardState *card)
{
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
ccid_on_slot_change(s, false);
ccid_flush_pending_answers(s);
ccid_reset(s);
}
int ccid_card_ccid_attach(CCIDCardState *card)
{
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
DPRINTF(s, 1, "CCID Attach\n");
if (s->migration_state == MIGRATION_MIGRATED) {
s->migration_state = MIGRATION_NONE;
}
return 0;
}
void ccid_card_ccid_detach(CCIDCardState *card)
{
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
DPRINTF(s, 1, "CCID Detach\n");
if (ccid_card_inserted(s)) {
ccid_on_slot_change(s, false);
}
ccid_detach(s);
}
void ccid_card_card_error(CCIDCardState *card, uint64_t error)
{
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
s->bmCommandStatus = COMMAND_STATUS_FAILED;
s->last_answer_error = error;
DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error);
/* TODO: these errors should be more verbose and propagated to the guest.*/
/*
* We flush all pending answers on CardRemove message in ccid-card-passthru,
* so check that first to not trigger abort
*/
if (ccid_has_pending_answers(s)) {
ccid_write_data_block_answer(s, NULL, 0);
}
}
void ccid_card_card_inserted(CCIDCardState *card)
{
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
ccid_flush_pending_answers(s);
ccid_on_slot_change(s, true);
}
static int ccid_card_exit(DeviceState *qdev)
{
int ret = 0;
CCIDCardState *card = DO_UPCAST(CCIDCardState, qdev, qdev);
CCIDCardInfo *info = DO_UPCAST(CCIDCardInfo, qdev, qdev->info);
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
if (ccid_card_inserted(s)) {
ccid_card_card_removed(card);
}
if (info->exitfn) {
ret = info->exitfn(card);
}
s->card = NULL;
s->cardinfo = NULL;
return ret;
}
static int ccid_card_init(DeviceState *qdev, DeviceInfo *base)
{
CCIDCardState *card = DO_UPCAST(CCIDCardState, qdev, qdev);
CCIDCardInfo *info = DO_UPCAST(CCIDCardInfo, qdev, base);
USBCCIDState *s =
DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent);
int ret = 0;
if (card->slot != 0) {
error_report("Warning: usb-ccid supports one slot, can't add %d",
card->slot);
return -1;
}
if (s->card != NULL) {
error_report("Warning: usb-ccid card already full, not adding");
return -1;
}
ret = info->initfn ? info->initfn(card) : ret;
if (ret == 0) {
s->card = card;
s->cardinfo = info;
}
return ret;
}
void ccid_card_qdev_register(CCIDCardInfo *card)
{
card->qdev.bus_info = &ccid_bus_info;
card->qdev.init = ccid_card_init;
card->qdev.exit = ccid_card_exit;
qdev_register(&card->qdev);
}
static int ccid_initfn(USBDevice *dev)
{
USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
qbus_create_inplace(&s->bus.qbus, &ccid_bus_info, &dev->qdev, NULL);
s->bus.qbus.allow_hotplug = 1;
s->card = NULL;
s->cardinfo = NULL;
s->migration_state = MIGRATION_NONE;
s->migration_target_ip = 0;
s->migration_target_port = 0;
s->dev.speed = USB_SPEED_FULL;
s->dev.speedmask = USB_SPEED_MASK_FULL;
s->notify_slot_change = false;
s->powered = true;
s->pending_answers_num = 0;
s->last_answer_error = 0;
s->bulk_in_pending_start = 0;
s->bulk_in_pending_end = 0;
s->current_bulk_in = NULL;
ccid_reset_error_status(s);
s->bulk_out_pos = 0;
ccid_reset_parameters(s);
ccid_reset(s);
return 0;
}
static int ccid_post_load(void *opaque, int version_id)
{
USBCCIDState *s = opaque;
/*
* This must be done after usb_device_attach, which sets state to ATTACHED,
* while it must be DEFAULT in order to accept packets (like it is after
* reset, but reset will reset our addr and call our reset handler which
* may change state, and we don't want to do that when migrating).
*/
s->dev.state = s->state_vmstate;
return 0;
}
static void ccid_pre_save(void *opaque)
{
USBCCIDState *s = opaque;
s->state_vmstate = s->dev.state;
if (s->dev.attached) {
/*
* Migrating an open device, ignore reconnection CHR_EVENT to avoid an
* erroneous detach.
*/
s->migration_state = MIGRATION_MIGRATED;
}
}
static VMStateDescription bulk_in_vmstate = {
.name = "CCID BulkIn state",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_BUFFER(data, BulkIn),
VMSTATE_UINT32(len, BulkIn),
VMSTATE_UINT32(pos, BulkIn),
VMSTATE_END_OF_LIST()
}
};
static VMStateDescription answer_vmstate = {
.name = "CCID Answer state",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(slot, Answer),
VMSTATE_UINT8(seq, Answer),
VMSTATE_END_OF_LIST()
}
};
static VMStateDescription usb_device_vmstate = {
.name = "usb_device",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(addr, USBDevice),
VMSTATE_BUFFER(setup_buf, USBDevice),
VMSTATE_BUFFER(data_buf, USBDevice),
VMSTATE_END_OF_LIST()
}
};
static VMStateDescription ccid_vmstate = {
.name = CCID_DEV_NAME,
.version_id = 1,
.minimum_version_id = 1,
.post_load = ccid_post_load,
.pre_save = ccid_pre_save,
.fields = (VMStateField[]) {
VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice),
VMSTATE_UINT8(debug, USBCCIDState),
VMSTATE_BUFFER(bulk_out_data, USBCCIDState),
VMSTATE_UINT32(bulk_out_pos, USBCCIDState),
VMSTATE_UINT8(bmSlotICCState, USBCCIDState),
VMSTATE_UINT8(powered, USBCCIDState),
VMSTATE_UINT8(notify_slot_change, USBCCIDState),
VMSTATE_UINT64(last_answer_error, USBCCIDState),
VMSTATE_UINT8(bError, USBCCIDState),
VMSTATE_UINT8(bmCommandStatus, USBCCIDState),
VMSTATE_UINT8(bProtocolNum, USBCCIDState),
VMSTATE_BUFFER(abProtocolDataStructure, USBCCIDState),
VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState),
VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState,
BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn),
VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState),
VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState),
VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState,
PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer),
VMSTATE_UINT32(pending_answers_num, USBCCIDState),
VMSTATE_UINT8(migration_state, USBCCIDState),
VMSTATE_UINT32(state_vmstate, USBCCIDState),
VMSTATE_END_OF_LIST()
}
};
static struct USBDeviceInfo ccid_info = {
.product_desc = "QEMU USB CCID",
.qdev.name = CCID_DEV_NAME,
.qdev.desc = "CCID Rev 1.1 smartcard reader",
.qdev.size = sizeof(USBCCIDState),
.init = ccid_initfn,
.handle_packet = usb_generic_handle_packet,
.handle_reset = ccid_handle_reset,
.handle_control = ccid_handle_control,
.handle_data = ccid_handle_data,
.handle_destroy = ccid_handle_destroy,
.usbdevice_name = "ccid",
.qdev.props = (Property[]) {
DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0),
DEFINE_PROP_END_OF_LIST(),
},
.qdev.vmsd = &ccid_vmstate,
};
static void ccid_register_devices(void)
{
usb_qdev_register(&ccid_info);
}
device_init(ccid_register_devices)
Reference in New Issue View Git Blame Copy Permalink