qemu-e2k/include/hw/scsi/esp.h

134 lines
3.1 KiB
C

#ifndef QEMU_HW_ESP_H
#define QEMU_HW_ESP_H
#include "hw/scsi/scsi.h"
/* esp.c */
#define ESP_MAX_DEVS 7
typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len);
void esp_init(hwaddr espaddr, int it_shift,
ESPDMAMemoryReadWriteFunc dma_memory_read,
ESPDMAMemoryReadWriteFunc dma_memory_write,
void *dma_opaque, qemu_irq irq, qemu_irq *reset,
qemu_irq *dma_enable);
#define ESP_REGS 16
#define TI_BUFSZ 16
typedef struct ESPState ESPState;
struct ESPState {
uint8_t rregs[ESP_REGS];
uint8_t wregs[ESP_REGS];
qemu_irq irq;
uint8_t chip_id;
bool tchi_written;
int32_t ti_size;
uint32_t ti_rptr, ti_wptr;
uint32_t status;
uint32_t dma;
uint8_t ti_buf[TI_BUFSZ];
SCSIBus bus;
SCSIDevice *current_dev;
SCSIRequest *current_req;
uint8_t cmdbuf[TI_BUFSZ];
uint32_t cmdlen;
uint32_t do_cmd;
/* The amount of data left in the current DMA transfer. */
uint32_t dma_left;
/* The size of the current DMA transfer. Zero if no transfer is in
progress. */
uint32_t dma_counter;
int dma_enabled;
uint32_t async_len;
uint8_t *async_buf;
ESPDMAMemoryReadWriteFunc dma_memory_read;
ESPDMAMemoryReadWriteFunc dma_memory_write;
void *dma_opaque;
void (*dma_cb)(ESPState *s);
};
#define ESP_TCLO 0x0
#define ESP_TCMID 0x1
#define ESP_FIFO 0x2
#define ESP_CMD 0x3
#define ESP_RSTAT 0x4
#define ESP_WBUSID 0x4
#define ESP_RINTR 0x5
#define ESP_WSEL 0x5
#define ESP_RSEQ 0x6
#define ESP_WSYNTP 0x6
#define ESP_RFLAGS 0x7
#define ESP_WSYNO 0x7
#define ESP_CFG1 0x8
#define ESP_RRES1 0x9
#define ESP_WCCF 0x9
#define ESP_RRES2 0xa
#define ESP_WTEST 0xa
#define ESP_CFG2 0xb
#define ESP_CFG3 0xc
#define ESP_RES3 0xd
#define ESP_TCHI 0xe
#define ESP_RES4 0xf
#define CMD_DMA 0x80
#define CMD_CMD 0x7f
#define CMD_NOP 0x00
#define CMD_FLUSH 0x01
#define CMD_RESET 0x02
#define CMD_BUSRESET 0x03
#define CMD_TI 0x10
#define CMD_ICCS 0x11
#define CMD_MSGACC 0x12
#define CMD_PAD 0x18
#define CMD_SATN 0x1a
#define CMD_RSTATN 0x1b
#define CMD_SEL 0x41
#define CMD_SELATN 0x42
#define CMD_SELATNS 0x43
#define CMD_ENSEL 0x44
#define CMD_DISSEL 0x45
#define STAT_DO 0x00
#define STAT_DI 0x01
#define STAT_CD 0x02
#define STAT_ST 0x03
#define STAT_MO 0x06
#define STAT_MI 0x07
#define STAT_PIO_MASK 0x06
#define STAT_TC 0x10
#define STAT_PE 0x20
#define STAT_GE 0x40
#define STAT_INT 0x80
#define BUSID_DID 0x07
#define INTR_FC 0x08
#define INTR_BS 0x10
#define INTR_DC 0x20
#define INTR_RST 0x80
#define SEQ_0 0x0
#define SEQ_CD 0x4
#define CFG1_RESREPT 0x40
#define TCHI_FAS100A 0x4
#define TCHI_AM53C974 0x12
void esp_dma_enable(ESPState *s, int irq, int level);
void esp_request_cancelled(SCSIRequest *req);
void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid);
void esp_transfer_data(SCSIRequest *req, uint32_t len);
void esp_hard_reset(ESPState *s);
uint64_t esp_reg_read(ESPState *s, uint32_t saddr);
void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val);
extern const VMStateDescription vmstate_esp;
#endif