Igor Mammedov 4daf95d607 arm/digic_boards: use memdev for RAM ... memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. PS: remove no longer needed DigicBoardState PS2: while at it add check for user supplied RAM size and error out if it mismatches board expected value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200219160953.13771-14-imammedo@redhat.com>		2020-02-19 16:49:54 +00:00
..
allwinner-a10.c	hw/arm/allwinner-a10: Remove local qemu_irq variables	2020-01-17 14:09:30 +00:00
armsse.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
armv7m.c	hw/core/loader: Let load_elf() populate a field with CPU-specific flags	2020-01-29 19:28:52 +01:00
aspeed_ast2600.c	hw/arm: ast2600: Wire up EHCI controllers	2020-02-13 14:14:55 +00:00
aspeed_soc.c	hw/arm: ast2400/ast2500: Wire up EHCI controllers	2020-02-13 14:14:55 +00:00
aspeed.c	arm/aspeed: use memdev for RAM	2020-02-19 16:49:54 +00:00
bcm2835_peripherals.c	hw/arm/bcm2835_peripherals: Use the SYS_timer	2019-10-25 13:09:27 +01:00
bcm2836.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
boot.c	hw/core/loader: Let load_elf() populate a field with CPU-specific flags	2020-01-29 19:28:52 +01:00
collie.c	arm/collie: use memdev for RAM	2020-02-19 16:49:54 +00:00
cubieboard.c	arm/cubieboard: use memdev for RAM	2020-02-19 16:49:54 +00:00
digic_boards.c	arm/digic_boards: use memdev for RAM	2020-02-19 16:49:54 +00:00
digic.c
exynos4_boards.c
exynos4210.c	hw/arm/exynos4210: Connect serial port DMA busy signals with pl330	2020-01-23 16:34:15 +00:00
fsl-imx6.c	i.MX: Add support for WDT on i.MX6	2020-02-13 14:14:52 +00:00
fsl-imx6ul.c
fsl-imx7.c
fsl-imx25.c	i.MX: add an emulation for RNGC	2020-01-17 14:27:16 +00:00
fsl-imx31.c
gumstix.c
highbank.c	hw/arm/highbank: Use AddressSpace when using write_secondary_boot()	2019-10-25 13:09:27 +01:00
imx25_pdk.c
integratorcp.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
Kconfig	hw/misc: Add the STM32F4xx EXTI device	2020-01-17 14:09:29 +00:00
kzm.c
mainstone.c
Makefile.objs	hw/arm: Add the Netduino Plus 2	2020-01-17 14:09:29 +00:00
mcimx6ul-evk.c
mcimx7d-sabre.c
microbit.c
mps2-tz.c	hw/arm/mps2: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
mps2.c	hw/arm/mps2: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
msf2-soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
msf2-som.c
musca.c	hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:10:27 +02:00
musicpal.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
netduino2.c
netduinoplus2.c	hw/arm: Add the Netduino Plus 2	2020-01-17 14:09:29 +00:00
nrf51_soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
nseries.c	hw/arm/nseries: Replace the bluetooth chardev with a "null" chardev	2019-12-16 17:24:07 +01:00
omap1.c	omap-gpio: remove PROP_PTR	2020-01-07 17:24:29 +04:00
omap2.c	omap-gpio: remove PROP_PTR	2020-01-07 17:24:29 +04:00
omap_sx1.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
palm.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
pxa2xx_gpio.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
pxa2xx_pic.c
pxa2xx.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
raspi.c	hw/arm/raspi: Extract the cores count from the board revision	2020-02-13 14:30:51 +00:00
realview.c
sabrelite.c
sbsa-ref.c	numa: properly check if numa is supported	2019-12-19 14:57:14 -03:00
smmu-common.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
smmu-internal.h
smmuv3-internal.h	hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro	2019-12-20 14:03:00 +00:00
smmuv3.c	hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word position	2019-12-20 14:03:00 +00:00
spitz.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
stellaris.c	stellaris: delay timer_new to avoid memleaks	2020-02-07 14:04:28 +00:00
stm32f205_soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
stm32f405_soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
strongarm.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
strongarm.h	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
sysbus-fdt.c
tosa.c
trace-events
versatilepb.c
vexpress.c
virt-acpi-build.c	arm/acpi: simplify the description of PCI _CRS	2020-02-13 14:14:53 +00:00
virt.c	target/arm/cpu: Add the kvm-no-adjvtime CPU property	2020-01-30 16:02:06 +00:00
xilinx_zynq.c	hw/arm/xilinx_zynq: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
xlnx-versal-virt.c
xlnx-versal.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
xlnx-zcu102.c
xlnx-zynqmp.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
z2.c