qemu-e2k/include/hw/ppc/mac_dbdma.h
Mark Cave-Ayland ecba28dbf2 mac_dbdma: remove DBDMA_init() function
Instead we can now instantiate the MAC_DBDMA object directly within the
macio device. We also add the DBDMA device as a child property so that
it is possible to retrieve later.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27 13:05:41 +10:00

182 lines
6.2 KiB
C

/*
* Copyright (c) 2009 Laurent Vivier
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef HW_MAC_DBDMA_H
#define HW_MAC_DBDMA_H
#include "exec/memory.h"
#include "qemu/iov.h"
#include "sysemu/dma.h"
#include "hw/sysbus.h"
typedef struct DBDMA_io DBDMA_io;
typedef void (*DBDMA_flush)(DBDMA_io *io);
typedef void (*DBDMA_rw)(DBDMA_io *io);
typedef void (*DBDMA_end)(DBDMA_io *io);
struct DBDMA_io {
void *opaque;
void *channel;
hwaddr addr;
int len;
int is_last;
int is_dma_out;
DBDMA_end dma_end;
/* DMA is in progress, don't start another one */
bool processing;
/* DMA request */
void *dma_mem;
dma_addr_t dma_len;
DMADirection dir;
};
/*
* DBDMA control/status registers. All little-endian.
*/
#define DBDMA_CONTROL 0x00
#define DBDMA_STATUS 0x01
#define DBDMA_CMDPTR_HI 0x02
#define DBDMA_CMDPTR_LO 0x03
#define DBDMA_INTR_SEL 0x04
#define DBDMA_BRANCH_SEL 0x05
#define DBDMA_WAIT_SEL 0x06
#define DBDMA_XFER_MODE 0x07
#define DBDMA_DATA2PTR_HI 0x08
#define DBDMA_DATA2PTR_LO 0x09
#define DBDMA_RES1 0x0A
#define DBDMA_ADDRESS_HI 0x0B
#define DBDMA_BRANCH_ADDR_HI 0x0C
#define DBDMA_RES2 0x0D
#define DBDMA_RES3 0x0E
#define DBDMA_RES4 0x0F
#define DBDMA_REGS 16
#define DBDMA_SIZE (DBDMA_REGS * sizeof(uint32_t))
#define DBDMA_CHANNEL_SHIFT 7
#define DBDMA_CHANNEL_SIZE (1 << DBDMA_CHANNEL_SHIFT)
#define DBDMA_CHANNELS (0x1000 >> DBDMA_CHANNEL_SHIFT)
/* Bits in control and status registers */
#define RUN 0x8000
#define PAUSE 0x4000
#define FLUSH 0x2000
#define WAKE 0x1000
#define DEAD 0x0800
#define ACTIVE 0x0400
#define BT 0x0100
#define DEVSTAT 0x00ff
/*
* DBDMA command structure. These fields are all little-endian!
*/
typedef struct dbdma_cmd {
uint16_t req_count; /* requested byte transfer count */
uint16_t command; /* command word (has bit-fields) */
uint32_t phy_addr; /* physical data address */
uint32_t cmd_dep; /* command-dependent field */
uint16_t res_count; /* residual count after completion */
uint16_t xfer_status; /* transfer status */
} dbdma_cmd;
/* DBDMA command values in command field */
#define COMMAND_MASK 0xf000
#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */
#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
#define INPUT_MORE 0x2000 /* transfer stream data to memory */
#define INPUT_LAST 0x3000 /* ditto, expect end marker */
#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
#define DBDMA_NOP 0x6000 /* do nothing */
#define DBDMA_STOP 0x7000 /* suspend processing */
/* Key values in command field */
#define KEY_MASK 0x0700
#define KEY_STREAM0 0x0000 /* usual data stream */
#define KEY_STREAM1 0x0100 /* control/status stream */
#define KEY_STREAM2 0x0200 /* device-dependent stream */
#define KEY_STREAM3 0x0300 /* device-dependent stream */
#define KEY_STREAM4 0x0400 /* reserved */
#define KEY_REGS 0x0500 /* device register space */
#define KEY_SYSTEM 0x0600 /* system memory-mapped space */
#define KEY_DEVICE 0x0700 /* device memory-mapped space */
/* Interrupt control values in command field */
#define INTR_MASK 0x0030
#define INTR_NEVER 0x0000 /* don't interrupt */
#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */
#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */
#define INTR_ALWAYS 0x0030 /* always interrupt */
/* Branch control values in command field */
#define BR_MASK 0x000c
#define BR_NEVER 0x0000 /* don't branch */
#define BR_IFSET 0x0004 /* branch if condition bit is 1 */
#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */
#define BR_ALWAYS 0x000c /* always branch */
/* Wait control values in command field */
#define WAIT_MASK 0x0003
#define WAIT_NEVER 0x0000 /* don't wait */
#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */
#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */
#define WAIT_ALWAYS 0x0003 /* always wait */
typedef struct DBDMA_channel {
int channel;
uint32_t regs[DBDMA_REGS];
qemu_irq irq;
DBDMA_io io;
DBDMA_rw rw;
DBDMA_flush flush;
dbdma_cmd current;
} DBDMA_channel;
typedef struct {
SysBusDevice parent_obj;
MemoryRegion mem;
DBDMA_channel channels[DBDMA_CHANNELS];
QEMUBH *bh;
} DBDMAState;
/* Externally callable functions */
void DBDMA_register_channel(void *dbdma, int nchan, qemu_irq irq,
DBDMA_rw rw, DBDMA_flush flush,
void *opaque);
void DBDMA_kick(DBDMAState *dbdma);
#define TYPE_MAC_DBDMA "mac-dbdma"
#define MAC_DBDMA(obj) OBJECT_CHECK(DBDMAState, (obj), TYPE_MAC_DBDMA)
#endif