3e22762edc
Refactor the zone write check logic such that the most "meaningful" error is returned first. That is, first, if the zone is not writable, return an appropriate status code for that. Then, make sure we are actually writing at the write pointer and finally check that we do not cross the zone write boundary. This aligns with the "priority" of status codes for zone read checks. Also add a couple of additional descriptive trace events and remove an always true assert. Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
234 lines
21 KiB
Plaintext
234 lines
21 KiB
Plaintext
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
# fdc.c
|
|
fdc_ioport_read(uint8_t reg, uint8_t value) "read reg 0x%02x val 0x%02x"
|
|
fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x"
|
|
|
|
# pflash_cfi01.c
|
|
# pflash_cfi02.c
|
|
pflash_reset(void) "reset"
|
|
pflash_timer_expired(uint8_t cmd) "command 0x%02x done"
|
|
pflash_io_read(uint64_t offset, unsigned size, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x cmd:0x%02x wcycle:%u"
|
|
pflash_io_write(uint64_t offset, unsigned size, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x wcycle:%u"
|
|
pflash_data_read(uint64_t offset, unsigned size, uint32_t value) "data offset:0x%04"PRIx64" size:%u value:0x%04x"
|
|
pflash_data_write(uint64_t offset, unsigned size, uint32_t value, uint64_t counter) "data offset:0x%04"PRIx64" size:%u value:0x%04x counter:0x%016"PRIx64
|
|
pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x"
|
|
pflash_device_id(uint16_t id) "Read Device ID: 0x%04x"
|
|
pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64
|
|
|
|
# virtio-blk.c
|
|
virtio_blk_req_complete(void *vdev, void *req, int status) "vdev %p req %p status %d"
|
|
virtio_blk_rw_complete(void *vdev, void *req, int ret) "vdev %p req %p ret %d"
|
|
virtio_blk_handle_write(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_handle_read(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_submit_multireq(void *vdev, void *mrb, int start, int num_reqs, uint64_t offset, size_t size, bool is_write) "vdev %p mrb %p start %d num_reqs %d offset %"PRIu64" size %zu is_write %d"
|
|
|
|
# hd-geometry.c
|
|
hd_geometry_lchs_guess(void *blk, int cyls, int heads, int secs) "blk %p LCHS %d %d %d"
|
|
hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "blk %p CHS %u %u %u trans %d"
|
|
|
|
# nvme.c
|
|
# nvme traces for successful events
|
|
pci_nvme_register_namespace(uint32_t nsid) "nsid %"PRIu32""
|
|
pci_nvme_irq_msix(uint32_t vector) "raising MSI-X IRQ vector %u"
|
|
pci_nvme_irq_pin(void) "pulsing IRQ pin"
|
|
pci_nvme_irq_masked(void) "IRQ is masked"
|
|
pci_nvme_dma_read(uint64_t prp1, uint64_t prp2) "DMA read, prp1=0x%"PRIx64" prp2=0x%"PRIx64""
|
|
pci_nvme_map_addr(uint64_t addr, uint64_t len) "addr 0x%"PRIx64" len %"PRIu64""
|
|
pci_nvme_map_addr_cmb(uint64_t addr, uint64_t len) "addr 0x%"PRIx64" len %"PRIu64""
|
|
pci_nvme_map_prp(uint64_t trans_len, uint32_t len, uint64_t prp1, uint64_t prp2, int num_prps) "trans_len %"PRIu64" len %"PRIu32" prp1 0x%"PRIx64" prp2 0x%"PRIx64" num_prps %d"
|
|
pci_nvme_map_sgl(uint16_t cid, uint8_t typ, uint64_t len) "cid %"PRIu16" type 0x%"PRIx8" len %"PRIu64""
|
|
pci_nvme_io_cmd(uint16_t cid, uint32_t nsid, uint16_t sqid, uint8_t opcode, const char *opname) "cid %"PRIu16" nsid %"PRIu32" sqid %"PRIu16" opc 0x%"PRIx8" opname '%s'"
|
|
pci_nvme_admin_cmd(uint16_t cid, uint16_t sqid, uint8_t opcode, const char *opname) "cid %"PRIu16" sqid %"PRIu16" opc 0x%"PRIx8" opname '%s'"
|
|
pci_nvme_read(uint16_t cid, uint32_t nsid, uint32_t nlb, uint64_t count, uint64_t lba) "cid %"PRIu16" nsid %"PRIu32" nlb %"PRIu32" count %"PRIu64" lba 0x%"PRIx64""
|
|
pci_nvme_write(uint16_t cid, const char *verb, uint32_t nsid, uint32_t nlb, uint64_t count, uint64_t lba) "cid %"PRIu16" opname '%s' nsid %"PRIu32" nlb %"PRIu32" count %"PRIu64" lba 0x%"PRIx64""
|
|
pci_nvme_rw_cb(uint16_t cid, const char *blkname) "cid %"PRIu16" blk '%s'"
|
|
pci_nvme_block_status(int64_t offset, int64_t bytes, int64_t pnum, int ret, bool zeroed) "offset %"PRId64" bytes %"PRId64" pnum %"PRId64" ret 0x%x zeroed %d"
|
|
pci_nvme_dsm(uint16_t cid, uint32_t nsid, uint32_t nr, uint32_t attr) "cid %"PRIu16" nsid %"PRIu32" nr %"PRIu32" attr 0x%"PRIx32""
|
|
pci_nvme_dsm_deallocate(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba %"PRIu64" nlb %"PRIu32""
|
|
pci_nvme_compare(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba 0x%"PRIx64" nlb %"PRIu32""
|
|
pci_nvme_compare_cb(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_aio_discard_cb(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_aio_zone_reset_cb(uint16_t cid, uint64_t zslba) "cid %"PRIu16" zslba 0x%"PRIx64""
|
|
pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16""
|
|
pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d"
|
|
pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
|
|
pci_nvme_del_cq(uint16_t cqid) "deleted completion queue, cqid=%"PRIu16""
|
|
pci_nvme_identify_ctrl(void) "identify controller"
|
|
pci_nvme_identify_ctrl_csi(uint8_t csi) "identify controller, csi=0x%"PRIx8""
|
|
pci_nvme_identify_ns(uint32_t ns) "nsid %"PRIu32""
|
|
pci_nvme_identify_ns_csi(uint32_t ns, uint8_t csi) "nsid=%"PRIu32", csi=0x%"PRIx8""
|
|
pci_nvme_identify_nslist(uint32_t ns) "nsid %"PRIu32""
|
|
pci_nvme_identify_nslist_csi(uint16_t ns, uint8_t csi) "nsid=%"PRIu16", csi=0x%"PRIx8""
|
|
pci_nvme_identify_cmd_set(void) "identify i/o command set"
|
|
pci_nvme_identify_ns_descr_list(uint32_t ns) "nsid %"PRIu32""
|
|
pci_nvme_get_log(uint16_t cid, uint8_t lid, uint8_t lsp, uint8_t rae, uint32_t len, uint64_t off) "cid %"PRIu16" lid 0x%"PRIx8" lsp 0x%"PRIx8" rae 0x%"PRIx8" len %"PRIu32" off %"PRIu64""
|
|
pci_nvme_getfeat(uint16_t cid, uint32_t nsid, uint8_t fid, uint8_t sel, uint32_t cdw11) "cid %"PRIu16" nsid 0x%"PRIx32" fid 0x%"PRIx8" sel 0x%"PRIx8" cdw11 0x%"PRIx32""
|
|
pci_nvme_setfeat(uint16_t cid, uint32_t nsid, uint8_t fid, uint8_t save, uint32_t cdw11) "cid %"PRIu16" nsid 0x%"PRIx32" fid 0x%"PRIx8" save 0x%"PRIx8" cdw11 0x%"PRIx32""
|
|
pci_nvme_getfeat_vwcache(const char* result) "get feature volatile write cache, result=%s"
|
|
pci_nvme_getfeat_numq(int result) "get feature number of queues, result=%d"
|
|
pci_nvme_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq) "requested cq_count=%d sq_count=%d, responding with cq_count=%d sq_count=%d"
|
|
pci_nvme_setfeat_timestamp(uint64_t ts) "set feature timestamp = 0x%"PRIx64""
|
|
pci_nvme_getfeat_timestamp(uint64_t ts) "get feature timestamp = 0x%"PRIx64""
|
|
pci_nvme_process_aers(int queued) "queued %d"
|
|
pci_nvme_aer(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_aer_aerl_exceeded(void) "aerl exceeded"
|
|
pci_nvme_aer_masked(uint8_t type, uint8_t mask) "type 0x%"PRIx8" mask 0x%"PRIx8""
|
|
pci_nvme_aer_post_cqe(uint8_t typ, uint8_t info, uint8_t log_page) "type 0x%"PRIx8" info 0x%"PRIx8" lid 0x%"PRIx8""
|
|
pci_nvme_enqueue_event(uint8_t typ, uint8_t info, uint8_t log_page) "type 0x%"PRIx8" info 0x%"PRIx8" lid 0x%"PRIx8""
|
|
pci_nvme_enqueue_event_noqueue(int queued) "queued %d"
|
|
pci_nvme_enqueue_event_masked(uint8_t typ) "type 0x%"PRIx8""
|
|
pci_nvme_no_outstanding_aers(void) "ignoring event; no outstanding AERs"
|
|
pci_nvme_enqueue_req_completion(uint16_t cid, uint16_t cqid, uint16_t status) "cid %"PRIu16" cqid %"PRIu16" status 0x%"PRIx16""
|
|
pci_nvme_mmio_read(uint64_t addr, unsigned size) "addr 0x%"PRIx64" size %d"
|
|
pci_nvme_mmio_write(uint64_t addr, uint64_t data, unsigned size) "addr 0x%"PRIx64" data 0x%"PRIx64" size %d"
|
|
pci_nvme_mmio_doorbell_cq(uint16_t cqid, uint16_t new_head) "cqid %"PRIu16" new_head %"PRIu16""
|
|
pci_nvme_mmio_doorbell_sq(uint16_t sqid, uint16_t new_tail) "sqid %"PRIu16" new_tail %"PRIu16""
|
|
pci_nvme_mmio_intm_set(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask set, data=0x%"PRIx64", new_mask=0x%"PRIx64""
|
|
pci_nvme_mmio_intm_clr(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask clr, data=0x%"PRIx64", new_mask=0x%"PRIx64""
|
|
pci_nvme_mmio_cfg(uint64_t data) "wrote MMIO, config controller config=0x%"PRIx64""
|
|
pci_nvme_mmio_aqattr(uint64_t data) "wrote MMIO, admin queue attributes=0x%"PRIx64""
|
|
pci_nvme_mmio_asqaddr(uint64_t data) "wrote MMIO, admin submission queue address=0x%"PRIx64""
|
|
pci_nvme_mmio_acqaddr(uint64_t data) "wrote MMIO, admin completion queue address=0x%"PRIx64""
|
|
pci_nvme_mmio_asqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin submission queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
|
|
pci_nvme_mmio_acqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin completion queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
|
|
pci_nvme_mmio_start_success(void) "setting controller enable bit succeeded"
|
|
pci_nvme_mmio_stopped(void) "cleared controller enable bit"
|
|
pci_nvme_mmio_shutdown_set(void) "shutdown bit set"
|
|
pci_nvme_mmio_shutdown_cleared(void) "shutdown bit cleared"
|
|
pci_nvme_open_zone(uint64_t slba, uint32_t zone_idx, int all) "open zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_close_zone(uint64_t slba, uint32_t zone_idx, int all) "close zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_finish_zone(uint64_t slba, uint32_t zone_idx, int all) "finish zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_reset_zone(uint64_t slba, uint32_t zone_idx, int all) "reset zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_offline_zone(uint64_t slba, uint32_t zone_idx, int all) "offline zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_set_descriptor_extension(uint64_t slba, uint32_t zone_idx) "set zone descriptor extension, slba=%"PRIu64", idx=%"PRIu32""
|
|
pci_nvme_zd_extension_set(uint32_t zone_idx) "set descriptor extension for zone_idx=%"PRIu32""
|
|
pci_nvme_clear_ns_close(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Closed state"
|
|
pci_nvme_clear_ns_reset(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Empty state"
|
|
|
|
# nvme traces for error conditions
|
|
pci_nvme_err_mdts(uint16_t cid, size_t len) "cid %"PRIu16" len %zu"
|
|
pci_nvme_err_req_status(uint16_t cid, uint32_t nsid, uint16_t status, uint8_t opc) "cid %"PRIu16" nsid %"PRIu32" status 0x%"PRIx16" opc 0x%"PRIx8""
|
|
pci_nvme_err_addr_read(uint64_t addr) "addr 0x%"PRIx64""
|
|
pci_nvme_err_addr_write(uint64_t addr) "addr 0x%"PRIx64""
|
|
pci_nvme_err_cfs(void) "controller fatal status"
|
|
pci_nvme_err_aio(uint16_t cid, const char *errname, uint16_t status) "cid %"PRIu16" err '%s' status 0x%"PRIx16""
|
|
pci_nvme_err_invalid_sgld(uint16_t cid, uint8_t typ) "cid %"PRIu16" type 0x%"PRIx8""
|
|
pci_nvme_err_invalid_num_sgld(uint16_t cid, uint8_t typ) "cid %"PRIu16" type 0x%"PRIx8""
|
|
pci_nvme_err_invalid_sgl_excess_length(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_err_invalid_dma(void) "PRP/SGL is too small for transfer size"
|
|
pci_nvme_err_invalid_prplist_ent(uint64_t prplist) "PRP list entry is not page aligned: 0x%"PRIx64""
|
|
pci_nvme_err_invalid_prp2_align(uint64_t prp2) "PRP2 is not page aligned: 0x%"PRIx64""
|
|
pci_nvme_err_invalid_opc(uint8_t opc) "invalid opcode 0x%"PRIx8""
|
|
pci_nvme_err_invalid_admin_opc(uint8_t opc) "invalid admin opcode 0x%"PRIx8""
|
|
pci_nvme_err_invalid_lba_range(uint64_t start, uint64_t len, uint64_t limit) "Invalid LBA start=%"PRIu64" len=%"PRIu64" limit=%"PRIu64""
|
|
pci_nvme_err_invalid_log_page_offset(uint64_t ofs, uint64_t size) "must be <= %"PRIu64", got %"PRIu64""
|
|
pci_nvme_err_cmb_invalid_cba(uint64_t cmbmsc) "cmbmsc 0x%"PRIx64""
|
|
pci_nvme_err_cmb_not_enabled(uint64_t cmbmsc) "cmbmsc 0x%"PRIx64""
|
|
pci_nvme_err_unaligned_zone_cmd(uint8_t action, uint64_t slba, uint64_t zslba) "unaligned zone op 0x%"PRIx32", got slba=%"PRIu64", zslba=%"PRIu64""
|
|
pci_nvme_err_invalid_zone_state_transition(uint8_t action, uint64_t slba, uint8_t attrs) "action=0x%"PRIx8", slba=%"PRIu64", attrs=0x%"PRIx32""
|
|
pci_nvme_err_write_not_at_wp(uint64_t slba, uint64_t zone, uint64_t wp) "writing at slba=%"PRIu64", zone=%"PRIu64", but wp=%"PRIu64""
|
|
pci_nvme_err_append_not_at_start(uint64_t slba, uint64_t zone) "appending at slba=%"PRIu64", but zone=%"PRIu64""
|
|
pci_nvme_err_zone_is_full(uint64_t zslba) "zslba 0x%"PRIx64""
|
|
pci_nvme_err_zone_is_read_only(uint64_t zslba) "zslba 0x%"PRIx64""
|
|
pci_nvme_err_zone_is_offline(uint64_t zslba) "zslba 0x%"PRIx64""
|
|
pci_nvme_err_zone_boundary(uint64_t slba, uint32_t nlb, uint64_t zcap) "lba 0x%"PRIx64" nlb %"PRIu32" zcap 0x%"PRIx64""
|
|
pci_nvme_err_zone_invalid_write(uint64_t slba, uint64_t wp) "lba 0x%"PRIx64" wp 0x%"PRIx64""
|
|
pci_nvme_err_zone_write_not_ok(uint64_t slba, uint32_t nlb, uint16_t status) "slba=%"PRIu64", nlb=%"PRIu32", status=0x%"PRIx16""
|
|
pci_nvme_err_zone_read_not_ok(uint64_t slba, uint32_t nlb, uint16_t status) "slba=%"PRIu64", nlb=%"PRIu32", status=0x%"PRIx16""
|
|
pci_nvme_err_append_too_large(uint64_t slba, uint32_t nlb, uint8_t zasl) "slba=%"PRIu64", nlb=%"PRIu32", zasl=%"PRIu8""
|
|
pci_nvme_err_insuff_active_res(uint32_t max_active) "max_active=%"PRIu32" zone limit exceeded"
|
|
pci_nvme_err_insuff_open_res(uint32_t max_open) "max_open=%"PRIu32" zone limit exceeded"
|
|
pci_nvme_err_zd_extension_map_error(uint32_t zone_idx) "can't map descriptor extension for zone_idx=%"PRIu32""
|
|
pci_nvme_err_invalid_iocsci(uint32_t idx) "unsupported command set combination index %"PRIu32""
|
|
pci_nvme_err_invalid_del_sq(uint16_t qid) "invalid submission queue deletion, sid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_cqid(uint16_t cqid) "failed creating submission queue, invalid cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_sqid(uint16_t sqid) "failed creating submission queue, invalid sqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_size(uint16_t qsize) "failed creating submission queue, invalid qsize=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_addr(uint64_t addr) "failed creating submission queue, addr=0x%"PRIx64""
|
|
pci_nvme_err_invalid_create_sq_qflags(uint16_t qflags) "failed creating submission queue, qflags=%"PRIu16""
|
|
pci_nvme_err_invalid_del_cq_cqid(uint16_t cqid) "failed deleting completion queue, cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_del_cq_notempty(uint16_t cqid) "failed deleting completion queue, it is not empty, cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_cqid(uint16_t cqid) "failed creating completion queue, cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_size(uint16_t size) "failed creating completion queue, size=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_addr(uint64_t addr) "failed creating completion queue, addr=0x%"PRIx64""
|
|
pci_nvme_err_invalid_create_cq_vector(uint16_t vector) "failed creating completion queue, vector=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_qflags(uint16_t qflags) "failed creating completion queue, qflags=%"PRIu16""
|
|
pci_nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx16""
|
|
pci_nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32""
|
|
pci_nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32""
|
|
pci_nvme_err_invalid_log_page(uint16_t cid, uint16_t lid) "cid %"PRIu16" lid 0x%"PRIx16""
|
|
pci_nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues"
|
|
pci_nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues"
|
|
pci_nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
|
|
pci_nvme_err_startfail_nbaracq(void) "nvme_start_ctrl failed because the admin completion queue address is null"
|
|
pci_nvme_err_startfail_asq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin submission queue address is misaligned: 0x%"PRIx64""
|
|
pci_nvme_err_startfail_acq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin completion queue address is misaligned: 0x%"PRIx64""
|
|
pci_nvme_err_startfail_page_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too small: log2size=%u, min=%u"
|
|
pci_nvme_err_startfail_page_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too large: log2size=%u, max=%u"
|
|
pci_nvme_err_startfail_cqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too small: log2size=%u, min=%u"
|
|
pci_nvme_err_startfail_cqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too large: log2size=%u, max=%u"
|
|
pci_nvme_err_startfail_sqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too small: log2size=%u, min=%u"
|
|
pci_nvme_err_startfail_sqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too large: log2size=%u, max=%u"
|
|
pci_nvme_err_startfail_css(uint8_t css) "nvme_start_ctrl failed because invalid command set selected:%u"
|
|
pci_nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the admin submission queue size is zero"
|
|
pci_nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero"
|
|
pci_nvme_err_startfail_zasl_too_small(uint32_t zasl, uint32_t pagesz) "nvme_start_ctrl failed because zone append size limit %"PRIu32" is too small, needs to be >= %"PRIu32""
|
|
pci_nvme_err_startfail(void) "setting controller enable bit failed"
|
|
pci_nvme_err_invalid_mgmt_action(uint8_t action) "action=0x%"PRIx8""
|
|
|
|
# Traces for undefined behavior
|
|
pci_nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64""
|
|
pci_nvme_ub_mmiowr_toosmall(uint64_t offset, unsigned size) "MMIO write smaller than 32 bits, offset=0x%"PRIx64", size=%u"
|
|
pci_nvme_ub_mmiowr_intmask_with_msix(void) "undefined access to interrupt mask set when MSI-X is enabled"
|
|
pci_nvme_ub_mmiowr_ro_csts(void) "attempted to set a read only bit of controller status"
|
|
pci_nvme_ub_mmiowr_ssreset_w1c_unsupported(void) "attempted to W1C CSTS.NSSRO but CAP.NSSRS is zero (not supported)"
|
|
pci_nvme_ub_mmiowr_ssreset_unsupported(void) "attempted NVM subsystem reset but CAP.NSSRS is zero (not supported)"
|
|
pci_nvme_ub_mmiowr_cmbloc_reserved(void) "invalid write to reserved CMBLOC when CMBSZ is zero, ignored"
|
|
pci_nvme_ub_mmiowr_cmbsz_readonly(void) "invalid write to read only CMBSZ, ignored"
|
|
pci_nvme_ub_mmiowr_pmrcap_readonly(void) "invalid write to read only PMRCAP, ignored"
|
|
pci_nvme_ub_mmiowr_pmrsts_readonly(void) "invalid write to read only PMRSTS, ignored"
|
|
pci_nvme_ub_mmiowr_pmrebs_readonly(void) "invalid write to read only PMREBS, ignored"
|
|
pci_nvme_ub_mmiowr_pmrswtp_readonly(void) "invalid write to read only PMRSWTP, ignored"
|
|
pci_nvme_ub_mmiowr_invalid(uint64_t offset, uint64_t data) "invalid MMIO write, offset=0x%"PRIx64", data=0x%"PRIx64""
|
|
pci_nvme_ub_mmiord_misaligned32(uint64_t offset) "MMIO read not 32-bit aligned, offset=0x%"PRIx64""
|
|
pci_nvme_ub_mmiord_toosmall(uint64_t offset) "MMIO read smaller than 32-bits, offset=0x%"PRIx64""
|
|
pci_nvme_ub_mmiord_invalid_ofs(uint64_t offset) "MMIO read beyond last register, offset=0x%"PRIx64", returning 0"
|
|
pci_nvme_ub_db_wr_misaligned(uint64_t offset) "doorbell write not 32-bit aligned, offset=0x%"PRIx64", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_cq(uint32_t qid) "completion queue doorbell write for nonexistent queue, cqid=%"PRIu32", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_cqhead(uint32_t qid, uint16_t new_head) "completion queue doorbell write value beyond queue size, cqid=%"PRIu32", new_head=%"PRIu16", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_sq(uint32_t qid) "submission queue doorbell write for nonexistent queue, sqid=%"PRIu32", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_sqtail(uint32_t qid, uint16_t new_tail) "submission queue doorbell write value beyond queue size, sqid=%"PRIu32", new_head=%"PRIu16", ignoring"
|
|
pci_nvme_ub_unknown_css_value(void) "unknown value in cc.css field"
|
|
|
|
# xen-block.c
|
|
xen_block_realize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_connect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_disconnect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_unrealize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_size(const char *type, uint32_t disk, uint32_t partition, int64_t sectors) "%s d%up%u %"PRIi64
|
|
xen_disk_realize(void) ""
|
|
xen_disk_unrealize(void) ""
|
|
xen_cdrom_realize(void) ""
|
|
xen_cdrom_unrealize(void) ""
|
|
xen_block_blockdev_add(char *str) "%s"
|
|
xen_block_blockdev_del(const char *node_name) "%s"
|
|
xen_block_device_create(unsigned int number) "%u"
|
|
xen_block_device_destroy(unsigned int number) "%u"
|
|
|
|
# m25p80.c
|
|
m25p80_flash_erase(void *s, int offset, uint32_t len) "[%p] offset = 0x%"PRIx32", len = %u"
|
|
m25p80_programming_zero_to_one(void *s, uint32_t addr, uint8_t prev, uint8_t data) "[%p] programming zero to one! addr=0x%"PRIx32" 0x%"PRIx8" -> 0x%"PRIx8
|
|
m25p80_reset_done(void *s) "[%p] Reset done."
|
|
m25p80_command_decoded(void *s, uint32_t cmd) "[%p] new command:0x%"PRIx32
|
|
m25p80_complete_collecting(void *s, uint32_t cmd, int n, uint8_t ear, uint32_t cur_addr) "[%p] decode cmd: 0x%"PRIx32" len %d ear 0x%"PRIx8" addr 0x%"PRIx32
|
|
m25p80_populated_jedec(void *s) "[%p] populated jedec code"
|
|
m25p80_chip_erase(void *s) "[%p] chip erase"
|
|
m25p80_select(void *s, const char *what) "[%p] %sselect"
|
|
m25p80_page_program(void *s, uint32_t addr, uint8_t tx) "[%p] page program cur_addr=0x%"PRIx32" data=0x%"PRIx8
|
|
m25p80_transfer(void *s, uint8_t state, uint32_t len, uint8_t needed, uint32_t pos, uint32_t cur_addr, uint8_t t) "[%p] Transfer state 0x%"PRIx8" len 0x%"PRIx32" needed 0x%"PRIx8" pos 0x%"PRIx32" addr 0x%"PRIx32" tx 0x%"PRIx8
|
|
m25p80_read_byte(void *s, uint32_t addr, uint8_t v) "[%p] Read byte 0x%"PRIx32"=0x%"PRIx8
|
|
m25p80_read_data(void *s, uint32_t pos, uint8_t v) "[%p] Read data 0x%"PRIx32"=0x%"PRIx8
|
|
m25p80_binding(void *s) "[%p] Binding to IF_MTD drive"
|
|
m25p80_binding_no_bdrv(void *s) "[%p] No BDRV - binding to RAM"
|