qemu-e2k/include/hw/pci-host/spapr.h
Greg Kurz 040bdafce1 spapr: Adjust firmware path of PCI devices
It is currently not possible to perform a strict boot from USB storage:

$ qemu-system-ppc64 -accel kvm -nodefaults -nographic -serial stdio \
	-boot strict=on \
	-device qemu-xhci \
	-device usb-storage,drive=disk,bootindex=0 \
	-blockdev driver=file,node-name=disk,filename=fedora-ppc64le.qcow2

SLOF **********************************************************************
QEMU Starting
 Build Date = Jul 17 2020 11:15:24
 FW Version = git-e18ddad8516ff2cf
 Press "s" to enter Open Firmware.

Populating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /pci@800000020000000
                     00 0000 (D) : 1b36 000d    serial bus [ usb-xhci ]
No NVRAM common partition, re-initializing...
Scanning USB
  XHCI: Initializing
    USB Storage
       SCSI: Looking for devices
          101000000000000 DISK     : "QEMU     QEMU HARDDISK    2.5+"
Using default console: /vdevice/vty@71000000

  Welcome to Open Firmware

  Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
  This program and the accompanying materials are made available
  under the terms of the BSD License available at
  http://www.opensource.org/licenses/bsd-license.php

Trying to load:  from: /pci@800000020000000/usb@0/storage@1/disk@101000000000000 ...
E3405: No such device

E3407: Load failed

  Type 'boot' and press return to continue booting the system.
  Type 'reset-all' and press return to reboot the system.

Ready!
0 >

The device tree handed over by QEMU to SLOF indeed contains:

qemu,boot-list =
	"/pci@800000020000000/usb@0/storage@1/disk@101000000000000 HALT";

but the device node is named usb-xhci@0, not usb@0.

This happens because the firmware names of PCI devices returned
by get_boot_devices_list() come from pcibus_get_fw_dev_path(),
while the sPAPR PHB code uses a different naming scheme for
device nodes. This inconsistency has always been there but it was
hidden for a long time because SLOF used to rename USB device
nodes, until this commit, merged in QEMU 4.2.0 :

commit 85164ad4ed
Author: Alexey Kardashevskiy <aik@ozlabs.ru>
Date:   Wed Sep 11 16:24:32 2019 +1000

    pseries: Update SLOF firmware image

    This fixes USB host bus adapter name in the device tree to match QEMU's
    one.

    Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Fortunately, sPAPR implements the firmware path provider interface.
This provides a way to override the default firmware paths.

Just factor out the sPAPR PHB naming logic from spapr_dt_pci_device()
to a helper, and use it in the sPAPR firmware path provider hook.

Fixes: 85164ad4ed ("pseries: Update SLOF firmware image")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210122170157.246374-1-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00

216 lines
6.8 KiB
C

/*
* QEMU SPAPR PCI BUS definitions
*
* Copyright (c) 2011 Alexey Kardashevskiy <aik@au1.ibm.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef PCI_HOST_SPAPR_H
#define PCI_HOST_SPAPR_H
#include "hw/ppc/spapr.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_host.h"
#include "hw/ppc/xics.h"
#include "qom/object.h"
#define TYPE_SPAPR_PCI_HOST_BRIDGE "spapr-pci-host-bridge"
OBJECT_DECLARE_SIMPLE_TYPE(SpaprPhbState, SPAPR_PCI_HOST_BRIDGE)
#define SPAPR_PCI_DMA_MAX_WINDOWS 2
typedef struct SpaprPciMsi {
uint32_t first_irq;
uint32_t num;
} SpaprPciMsi;
typedef struct SpaprPciMsiMig {
uint32_t key;
SpaprPciMsi value;
} SpaprPciMsiMig;
typedef struct SpaprPciLsi {
uint32_t irq;
} SpaprPciLsi;
typedef struct SpaprPhbPciNvGpuConfig SpaprPhbPciNvGpuConfig;
struct SpaprPhbState {
PCIHostState parent_obj;
uint32_t index;
uint64_t buid;
char *dtbusname;
bool dr_enabled;
MemoryRegion memspace, iospace;
hwaddr mem_win_addr, mem_win_size, mem64_win_addr, mem64_win_size;
uint64_t mem64_win_pciaddr;
hwaddr io_win_addr, io_win_size;
MemoryRegion mem32window, mem64window, iowindow, msiwindow;
uint32_t dma_liobn[SPAPR_PCI_DMA_MAX_WINDOWS];
hwaddr dma_win_addr, dma_win_size;
AddressSpace iommu_as;
MemoryRegion iommu_root;
SpaprPciLsi lsi_table[PCI_NUM_PINS];
GHashTable *msi;
/* Temporary cache for migration purposes */
int32_t msi_devs_num;
SpaprPciMsiMig *msi_devs;
QLIST_ENTRY(SpaprPhbState) list;
bool ddw_enabled;
uint64_t page_size_mask;
uint64_t dma64_win_addr;
uint32_t numa_node;
bool pcie_ecs; /* Allow access to PCIe extended config space? */
/* Fields for migration compatibility hacks */
bool pre_2_8_migration;
uint32_t mig_liobn;
hwaddr mig_mem_win_addr, mig_mem_win_size;
hwaddr mig_io_win_addr, mig_io_win_size;
hwaddr nv2_gpa_win_addr;
hwaddr nv2_atsd_win_addr;
SpaprPhbPciNvGpuConfig *nvgpus;
bool pre_5_1_assoc;
};
#define SPAPR_PCI_MEM_WIN_BUS_OFFSET 0x80000000ULL
#define SPAPR_PCI_MEM32_WIN_SIZE \
((1ULL << 32) - SPAPR_PCI_MEM_WIN_BUS_OFFSET)
#define SPAPR_PCI_MEM64_WIN_SIZE 0x10000000000ULL /* 1 TiB */
/* All PCI outbound windows will be within this range */
#define SPAPR_PCI_BASE (1ULL << 45) /* 32 TiB */
#define SPAPR_PCI_LIMIT (1ULL << 46) /* 64 TiB */
#define SPAPR_MAX_PHBS ((SPAPR_PCI_LIMIT - SPAPR_PCI_BASE) / \
SPAPR_PCI_MEM64_WIN_SIZE - 1)
#define SPAPR_PCI_IO_WIN_SIZE 0x10000
#define SPAPR_PCI_MSI_WINDOW 0x40000000000ULL
#define SPAPR_PCI_NV2RAM64_WIN_BASE SPAPR_PCI_LIMIT
#define SPAPR_PCI_NV2RAM64_WIN_SIZE (2 * TiB) /* For up to 6 GPUs 256GB each */
/* Max number of NVLinks per GPU in any physical box */
#define NVGPU_MAX_LINKS 3
/*
* GPU RAM starts at 64TiB so huge DMA window to cover it all ends at 128TiB
* which is enough. We do not need DMA for ATSD so we put them at 128TiB.
*/
#define SPAPR_PCI_NV2ATSD_WIN_BASE (128 * TiB)
#define SPAPR_PCI_NV2ATSD_WIN_SIZE (NVGPU_MAX_NUM * NVGPU_MAX_LINKS * \
64 * KiB)
int spapr_dt_phb(SpaprMachineState *spapr, SpaprPhbState *phb,
uint32_t intc_phandle, void *fdt, int *node_offset);
void spapr_pci_rtas_init(void);
SpaprPhbState *spapr_pci_find_phb(SpaprMachineState *spapr, uint64_t buid);
PCIDevice *spapr_pci_find_dev(SpaprMachineState *spapr, uint64_t buid,
uint32_t config_addr);
/* DRC callbacks */
void spapr_phb_remove_pci_device_cb(DeviceState *dev);
int spapr_pci_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
void *fdt, int *fdt_start_offset, Error **errp);
/* VFIO EEH hooks */
#ifdef CONFIG_LINUX
bool spapr_phb_eeh_available(SpaprPhbState *sphb);
int spapr_phb_vfio_eeh_set_option(SpaprPhbState *sphb,
unsigned int addr, int option);
int spapr_phb_vfio_eeh_get_state(SpaprPhbState *sphb, int *state);
int spapr_phb_vfio_eeh_reset(SpaprPhbState *sphb, int option);
int spapr_phb_vfio_eeh_configure(SpaprPhbState *sphb);
void spapr_phb_vfio_reset(DeviceState *qdev);
void spapr_phb_nvgpu_setup(SpaprPhbState *sphb, Error **errp);
void spapr_phb_nvgpu_free(SpaprPhbState *sphb);
void spapr_phb_nvgpu_populate_dt(SpaprPhbState *sphb, void *fdt, int bus_off,
Error **errp);
void spapr_phb_nvgpu_ram_populate_dt(SpaprPhbState *sphb, void *fdt);
void spapr_phb_nvgpu_populate_pcidev_dt(PCIDevice *dev, void *fdt, int offset,
SpaprPhbState *sphb);
#else
static inline bool spapr_phb_eeh_available(SpaprPhbState *sphb)
{
return false;
}
static inline int spapr_phb_vfio_eeh_set_option(SpaprPhbState *sphb,
unsigned int addr, int option)
{
return RTAS_OUT_HW_ERROR;
}
static inline int spapr_phb_vfio_eeh_get_state(SpaprPhbState *sphb,
int *state)
{
return RTAS_OUT_HW_ERROR;
}
static inline int spapr_phb_vfio_eeh_reset(SpaprPhbState *sphb, int option)
{
return RTAS_OUT_HW_ERROR;
}
static inline int spapr_phb_vfio_eeh_configure(SpaprPhbState *sphb)
{
return RTAS_OUT_HW_ERROR;
}
static inline void spapr_phb_vfio_reset(DeviceState *qdev)
{
}
static inline void spapr_phb_nvgpu_setup(SpaprPhbState *sphb, Error **errp)
{
}
static inline void spapr_phb_nvgpu_free(SpaprPhbState *sphb)
{
}
static inline void spapr_phb_nvgpu_populate_dt(SpaprPhbState *sphb, void *fdt,
int bus_off, Error **errp)
{
}
static inline void spapr_phb_nvgpu_ram_populate_dt(SpaprPhbState *sphb,
void *fdt)
{
}
static inline void spapr_phb_nvgpu_populate_pcidev_dt(PCIDevice *dev, void *fdt,
int offset,
SpaprPhbState *sphb)
{
}
#endif
void spapr_phb_dma_reset(SpaprPhbState *sphb);
static inline unsigned spapr_phb_windows_supported(SpaprPhbState *sphb)
{
return sphb->ddw_enabled ? SPAPR_PCI_DMA_MAX_WINDOWS : 1;
}
char *spapr_pci_fw_dev_name(PCIDevice *dev);
#endif /* PCI_HOST_SPAPR_H */