c37d98f3a9
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
74 lines
2.3 KiB
ReStructuredText
74 lines
2.3 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
.. _igb:
|
|
|
|
igb
|
|
---
|
|
|
|
igb is a family of Intel's gigabit ethernet controllers. In QEMU, 82576
|
|
emulation is implemented in particular. Its datasheet is available at [1]_.
|
|
|
|
This implementation is expected to be useful to test SR-IOV networking without
|
|
requiring physical hardware.
|
|
|
|
Limitations
|
|
===========
|
|
|
|
This igb implementation was tested with Linux Test Project [2]_ and Windows HLK
|
|
[3]_ during the initial development. Later it was also tested with DPDK Test
|
|
Suite [4]_. The command used when testing with LTP is:
|
|
|
|
.. code-block:: shell
|
|
|
|
network.sh -6mta
|
|
|
|
Be aware that this implementation lacks many functionalities available with the
|
|
actual hardware, and you may experience various failures if you try to use it
|
|
with a different operating system other than DPDK, Linux, and Windows or if you
|
|
try functionalities not covered by the tests.
|
|
|
|
Using igb
|
|
=========
|
|
|
|
Using igb should be nothing different from using another network device. See
|
|
:ref:`Network_emulation` in general.
|
|
|
|
However, you may also need to perform additional steps to activate SR-IOV
|
|
feature on your guest. For Linux, refer to [5]_.
|
|
|
|
Developing igb
|
|
==============
|
|
|
|
igb is the successor of e1000e, and e1000e is the successor of e1000 in turn.
|
|
As these devices are very similar, if you make a change for igb and the same
|
|
change can be applied to e1000e and e1000, please do so.
|
|
|
|
Please do not forget to run tests before submitting a change. As tests included
|
|
in QEMU is very minimal, run some application which is likely to be affected by
|
|
the change to confirm it works in an integrated system.
|
|
|
|
Testing igb
|
|
===========
|
|
|
|
A qtest of the basic functionality is available. Run the below at the build
|
|
directory:
|
|
|
|
.. code-block:: shell
|
|
|
|
meson test qtest-x86_64/qos-test
|
|
|
|
ethtool can test register accesses, interrupts, etc. It is automated as an
|
|
Avocado test and can be ran with the following command:
|
|
|
|
.. code:: shell
|
|
|
|
make check-avocado AVOCADO_TESTS=tests/avocado/netdev-ethtool.py
|
|
|
|
References
|
|
==========
|
|
|
|
.. [1] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/82576eb-gigabit-ethernet-controller-datasheet.pdf
|
|
.. [2] https://github.com/linux-test-project/ltp
|
|
.. [3] https://learn.microsoft.com/en-us/windows-hardware/test/hlk/
|
|
.. [4] https://doc.dpdk.org/dts/gsg/
|
|
.. [5] https://docs.kernel.org/PCI/pci-iov-howto.html
|