qemu-e2k/include/hw/display/xlnx_dp.h
Sai Pavan Boddu 759ae1b47e xlnx_dp: Introduce a vblank signal
Add a periodic timer which raises vblank at a frequency of 30Hz.

Note that this is a migration compatibility break for the
xlnx-zcu102 board type.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220601172353.3220232-3-fkonrad@xilinx.com
Changes by fkonrad:
  - Switched to transaction-based ptimer API.
  - Added the DP_INT_VBLNK_START macro.
Signed-off-by: Frederic Konrad <fkonrad@amd.com>
[PMM: bump vmstate version, add commit message note about
 compat break]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-08 19:38:47 +01:00

119 lines
3.3 KiB
C

/*
* xlnx_dp.h
*
* Copyright (C) 2015 : GreenSocs Ltd
* http://www.greensocs.com/ , email: info@greensocs.com
*
* Developed by :
* Frederic Konrad <fred.konrad@greensocs.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef XLNX_DP_H
#define XLNX_DP_H
#include "hw/sysbus.h"
#include "ui/console.h"
#include "hw/misc/auxbus.h"
#include "hw/i2c/i2c.h"
#include "hw/display/dpcd.h"
#include "hw/display/i2c-ddc.h"
#include "qemu/fifo8.h"
#include "qemu/units.h"
#include "hw/dma/xlnx_dpdma.h"
#include "audio/audio.h"
#include "qom/object.h"
#include "hw/ptimer.h"
#define AUD_CHBUF_MAX_DEPTH (32 * KiB)
#define MAX_QEMU_BUFFER_SIZE (4 * KiB)
#define DP_CORE_REG_OFFSET (0x0000)
#define DP_CORE_REG_ARRAY_SIZE (0x3B0 >> 2)
#define DP_AVBUF_REG_OFFSET (0xB000)
#define DP_AVBUF_REG_ARRAY_SIZE (0x238 >> 2)
#define DP_VBLEND_REG_OFFSET (0xA000)
#define DP_VBLEND_REG_ARRAY_SIZE (0x1E0 >> 2)
#define DP_AUDIO_REG_OFFSET (0xC000)
#define DP_AUDIO_REG_ARRAY_SIZE (0x50 >> 2)
#define DP_CONTAINER_SIZE (0xC050)
struct PixmanPlane {
pixman_format_code_t format;
DisplaySurface *surface;
};
struct XlnxDPState {
/*< private >*/
SysBusDevice parent_obj;
/* < public >*/
MemoryRegion container;
uint32_t core_registers[DP_CORE_REG_ARRAY_SIZE];
MemoryRegion core_iomem;
uint32_t avbufm_registers[DP_AVBUF_REG_ARRAY_SIZE];
MemoryRegion avbufm_iomem;
uint32_t vblend_registers[DP_VBLEND_REG_ARRAY_SIZE];
MemoryRegion vblend_iomem;
uint32_t audio_registers[DP_AUDIO_REG_ARRAY_SIZE];
MemoryRegion audio_iomem;
QemuConsole *console;
/*
* This is the planes used to display in console. When the blending is
* enabled bout_plane is displayed in console else it's g_plane.
*/
struct PixmanPlane g_plane;
struct PixmanPlane v_plane;
struct PixmanPlane bout_plane;
QEMUSoundCard aud_card;
SWVoiceOut *amixer_output_stream;
int16_t audio_buffer_0[AUD_CHBUF_MAX_DEPTH];
int16_t audio_buffer_1[AUD_CHBUF_MAX_DEPTH];
size_t audio_data_available[2];
int64_t temp_buffer[AUD_CHBUF_MAX_DEPTH];
int16_t out_buffer[AUD_CHBUF_MAX_DEPTH];
size_t byte_left; /* byte available in out_buffer. */
size_t data_ptr; /* next byte to be sent to QEMU. */
/* Associated DPDMA controller. */
XlnxDPDMAState *dpdma;
qemu_irq irq;
AUXBus *aux_bus;
Fifo8 rx_fifo;
Fifo8 tx_fifo;
/*
* XXX: This should be in an other module.
*/
DPCDState *dpcd;
I2CDDCState *edid;
ptimer_state *vblank;
};
#define TYPE_XLNX_DP "xlnx.v-dp"
OBJECT_DECLARE_SIMPLE_TYPE(XlnxDPState, XLNX_DP)
#endif