OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
59561e827b
qemu-e2k/hw/char/trace-events
Philippe Mathieu-Daudé 51141cab3b hw/char/pl011: Display register name in trace events 
To avoid knowing the register addresses by heart,
display their name along in the trace events.

Since the MMIO region is 4K wide (0x1000 bytes),
displaying the address with 3 digits is enough,
so reduce the address format.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230522153144.30610-5-philmd@linaro.org>
2023-08-31 19:47:43 +02:00

108 lines
6.9 KiB
Plaintext
Raw Blame History

# See docs/devel/tracing.rst for syntax documentation.
# parallel.c
parallel_ioport_read(const char *desc, uint16_t addr, uint8_t value) "read [%s] addr 0x%02x val 0x%02x"
parallel_ioport_write(const char *desc, uint16_t addr, uint8_t value) "write [%s] addr 0x%02x val 0x%02x"
# serial.c
serial_read(uint16_t addr, uint8_t value) "read addr 0x%02x val 0x%02x"
serial_write(uint16_t addr, uint8_t value) "write addr 0x%02x val 0x%02x"
serial_update_parameters(uint64_t baudrate, char parity, int data_bits, int stop_bits) "baudrate=%"PRIu64" parity='%c' data=%d stop=%d"
# virtio-serial-bus.c
virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u"
virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d"
virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u"
virtio_serial_handle_control_message_port(unsigned int port) "port %u"
# virtio-console.c
virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd"
virtio_console_chr_read(unsigned int port, int size) "port %u, size %d"
virtio_console_chr_event(unsigned int port, int event) "port %u, event %d"
# goldfish_tty.c
goldfish_tty_read(void *dev, unsigned int addr, unsigned int size, uint64_t value) "tty: %p reg: 0x%02x size: %d value: 0x%"PRIx64
goldfish_tty_write(void *dev, unsigned int addr, unsigned int size, uint64_t value) "tty: %p reg: 0x%02x size: %d value: 0x%"PRIx64
goldfish_tty_can_receive(void *dev, unsigned int available) "tty: %p available: %u"
goldfish_tty_receive(void *dev, unsigned int size) "tty: %p size: %u"
goldfish_tty_reset(void *dev) "tty: %p"
goldfish_tty_realize(void *dev) "tty: %p"
goldfish_tty_unrealize(void *dev) "tty: %p"
goldfish_tty_instance_init(void *dev) "tty: %p"
# grlib_apbuart.c
grlib_apbuart_event(int event) "event:%d"
grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
grlib_apbuart_readl_unknown(uint64_t addr) "addr 0x%"PRIx64
# escc.c
escc_hard_reset(void) "hard reset"
escc_soft_reset_chn(char channel) "soft reset channel %c"
escc_put_queue(char channel, int b) "channel %c put: 0x%02x"
escc_get_queue(char channel, int val) "channel %c get 0x%02x"
escc_update_irq(int irq) "IRQ = %d"
escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d"
escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = 0x%2.2x"
escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d"
escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = 0x%2.2x"
escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d"
escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d"
escc_sunkbd_event_in(int ch, const char *name, int down) "QKeyCode 0x%2.2x [%s], down %d"
escc_sunkbd_event_out(int ch) "Translated keycode 0x%2.2x"
escc_kbd_command(int val) "Command %d"
escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=0x%01x"
# pl011.c
pl011_irq_state(int level) "irq state %d"
pl011_read(uint32_t addr, uint32_t value, const char *regname) "addr 0x%03x value 0x%08x reg %s"
pl011_read_fifo(int read_count) "FIFO read, read_count now %d"
pl011_write(uint32_t addr, uint32_t value, const char *regname) "addr 0x%03x value 0x%08x reg %s"
pl011_can_receive(uint32_t lcr, int read_count, int r) "LCR 0x%08x read_count %d returning %d"
pl011_put_fifo(uint32_t c, int read_count) "new char 0x%x read_count now %d"
pl011_put_fifo_full(void) "FIFO now full, RXFF set"
pl011_baudrate_change(unsigned int baudrate, uint64_t clock, uint32_t ibrd, uint32_t fbrd) "new baudrate %u (clk: %" PRIu64 "hz, ibrd: %" PRIu32 ", fbrd: %" PRIu32 ")"
# cmsdk-apb-uart.c
cmsdk_apb_uart_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
cmsdk_apb_uart_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB UART write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
cmsdk_apb_uart_reset(void) "CMSDK APB UART: reset"
cmsdk_apb_uart_receive(uint8_t c) "CMSDK APB UART: got character 0x%x from backend"
cmsdk_apb_uart_tx_pending(void) "CMSDK APB UART: character send to backend pending"
cmsdk_apb_uart_tx(uint8_t c) "CMSDK APB UART: character 0x%x sent to backend"
cmsdk_apb_uart_set_params(int speed) "CMSDK APB UART: params set to %d 8N1"
# nrf51_uart.c
nrf51_uart_read(uint64_t addr, uint64_t r, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u"
nrf51_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u"
# shakti_uart.c
shakti_uart_read(uint64_t addr, uint16_t r, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx16 " size %u"
shakti_uart_write(uint64_t addr, uint64_t value, unsigned int size) "addr 0x%" PRIx64 " value 0x%" PRIx64 " size %u"
# exynos4210_uart.c
exynos_uart_dmabusy(uint32_t channel) "UART%d: DMA busy (Rx buffer empty)"
exynos_uart_dmaready(uint32_t channel) "UART%d: DMA ready"
exynos_uart_irq_raised(uint32_t channel, uint32_t reg) "UART%d: IRQ raised: 0x%08"PRIx32
exynos_uart_irq_lowered(uint32_t channel) "UART%d: IRQ lowered"
exynos_uart_update_params(uint32_t channel, int speed, uint8_t parity, int data, int stop, uint64_t wordtime) "UART%d: speed: %d, parity: %c, data bits: %d, stop bits: %d wordtime: %"PRId64"ns"
exynos_uart_write(uint32_t channel, uint32_t offset, const char *name, uint64_t val) "UART%d: <0x%04x> %s <- 0x%" PRIx64
exynos_uart_read(uint32_t channel, uint32_t offset, const char *name, uint64_t val) "UART%d: <0x%04x> %s -> 0x%" PRIx64
exynos_uart_rx_fifo_reset(uint32_t channel) "UART%d: Rx FIFO Reset"
exynos_uart_tx_fifo_reset(uint32_t channel) "UART%d: Tx FIFO Reset"
exynos_uart_tx(uint32_t channel, uint8_t ch) "UART%d: Tx 0x%02"PRIx32
exynos_uart_intclr(uint32_t channel, uint32_t reg) "UART%d: interrupts cleared: 0x%08"PRIx32
exynos_uart_ro_write(uint32_t channel, const char *name, uint32_t reg) "UART%d: Trying to write into RO register: %s [0x%04"PRIx32"]"
exynos_uart_rx(uint32_t channel, uint8_t ch) "UART%d: Rx 0x%02"PRIx32
exynos_uart_rx_error(uint32_t channel) "UART%d: Rx error"
exynos_uart_wo_read(uint32_t channel, const char *name, uint32_t reg) "UART%d: Trying to read from WO register: %s [0x%04"PRIx32"]"
exynos_uart_rxsize(uint32_t channel, uint32_t size) "UART%d: Rx FIFO size: %d"
exynos_uart_channel_error(uint32_t channel) "Wrong UART channel number: %d"
exynos_uart_rx_timeout(uint32_t channel, uint32_t stat, uint32_t intsp) "UART%d: Rx timeout stat=0x%x intsp=0x%x"
# cadence_uart.c
cadence_uart_baudrate(unsigned baudrate) "baudrate %u"
# sh_serial.c
sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size %d offs 0x%02" PRIx64 " -> 0x%02" PRIx64
sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size %d offs 0x%02" PRIx64 " <- 0x%02" PRIx64
Reference in New Issue View Git Blame Copy Permalink