qemu-e2k/hw/timer/imx_epit.c
Peter Maydell 6783ecf144 hw: Avoid use of QOM type name macros in VMStateDescriptions
The name field in a VMStateDescription is part of the migration state
versioning, so changing it will break migration.  It's therefore a
bad idea to use a QOM typename macro to initialize it, because in
general we're free to rename QOM types as part of code refactoring
and cleanup.  For the handful of devices that were doing this by
mistake, replace the QOM typenames with the corresponding literal
strings.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[AF: Use TYPE_PVSCSI for TypeInfo instead]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:32 +02:00

433 lines
10 KiB
C

/*
* IMX EPIT Timer
*
* Copyright (c) 2008 OK Labs
* Copyright (c) 2011 NICTA Pty Ltd
* Originally written by Hans Jiang
* Updated by Peter Chubb
* Updated by Jean-Christophe Dubois
*
* This code is licensed under GPL version 2 or later. See
* the COPYING file in the top-level directory.
*
*/
#include "hw/hw.h"
#include "qemu/bitops.h"
#include "qemu/timer.h"
#include "hw/ptimer.h"
#include "hw/sysbus.h"
#include "hw/arm/imx.h"
#define TYPE_IMX_EPIT "imx.epit"
#define DEBUG_TIMER 0
#if DEBUG_TIMER
static char const *imx_epit_reg_name(uint32_t reg)
{
switch (reg) {
case 0:
return "CR";
case 1:
return "SR";
case 2:
return "LR";
case 3:
return "CMP";
case 4:
return "CNT";
default:
return "[?]";
}
}
# define DPRINTF(fmt, args...) \
do { printf("%s: " fmt , __func__, ##args); } while (0)
#else
# define DPRINTF(fmt, args...) do {} while (0)
#endif
/*
* Define to 1 for messages about attempts to
* access unimplemented registers or similar.
*/
#define DEBUG_IMPLEMENTATION 1
#if DEBUG_IMPLEMENTATION
# define IPRINTF(fmt, args...) \
do { fprintf(stderr, "%s: " fmt, __func__, ##args); } while (0)
#else
# define IPRINTF(fmt, args...) do {} while (0)
#endif
#define IMX_EPIT(obj) \
OBJECT_CHECK(IMXEPITState, (obj), TYPE_IMX_EPIT)
/*
* EPIT: Enhanced periodic interrupt timer
*/
#define CR_EN (1 << 0)
#define CR_ENMOD (1 << 1)
#define CR_OCIEN (1 << 2)
#define CR_RLD (1 << 3)
#define CR_PRESCALE_SHIFT (4)
#define CR_PRESCALE_MASK (0xfff)
#define CR_SWR (1 << 16)
#define CR_IOVW (1 << 17)
#define CR_DBGEN (1 << 18)
#define CR_WAITEN (1 << 19)
#define CR_DOZEN (1 << 20)
#define CR_STOPEN (1 << 21)
#define CR_CLKSRC_SHIFT (24)
#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT)
#define TIMER_MAX 0XFFFFFFFFUL
/*
* Exact clock frequencies vary from board to board.
* These are typical.
*/
static const IMXClk imx_epit_clocks[] = {
0, /* 00 disabled */
IPG, /* 01 ipg_clk, ~532MHz */
IPG, /* 10 ipg_clk_highfreq */
CLK_32k, /* 11 ipg_clk_32k -- ~32kHz */
};
typedef struct {
SysBusDevice busdev;
ptimer_state *timer_reload;
ptimer_state *timer_cmp;
MemoryRegion iomem;
DeviceState *ccm;
uint32_t cr;
uint32_t sr;
uint32_t lr;
uint32_t cmp;
uint32_t cnt;
uint32_t freq;
qemu_irq irq;
} IMXEPITState;
/*
* Update interrupt status
*/
static void imx_epit_update_int(IMXEPITState *s)
{
if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
}
static void imx_epit_set_freq(IMXEPITState *s)
{
uint32_t clksrc;
uint32_t prescaler;
uint32_t freq;
clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2);
prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12);
freq = imx_clock_frequency(s->ccm, imx_epit_clocks[clksrc]) / prescaler;
s->freq = freq;
DPRINTF("Setting ptimer frequency to %u\n", freq);
if (freq) {
ptimer_set_freq(s->timer_reload, freq);
ptimer_set_freq(s->timer_cmp, freq);
}
}
static void imx_epit_reset(DeviceState *dev)
{
IMXEPITState *s = IMX_EPIT(dev);
/*
* Soft reset doesn't touch some bits; hard reset clears them
*/
s->cr &= ~(CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
s->sr = 0;
s->lr = TIMER_MAX;
s->cmp = 0;
s->cnt = 0;
/* stop both timers */
ptimer_stop(s->timer_cmp);
ptimer_stop(s->timer_reload);
/* compute new frequency */
imx_epit_set_freq(s);
/* init both timers to TIMER_MAX */
ptimer_set_limit(s->timer_cmp, TIMER_MAX, 1);
ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
if (s->freq && (s->cr & CR_EN)) {
/* if the timer is still enabled, restart it */
ptimer_run(s->timer_reload, 1);
}
}
static uint32_t imx_epit_update_count(IMXEPITState *s)
{
s->cnt = ptimer_get_count(s->timer_reload);
return s->cnt;
}
static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
{
IMXEPITState *s = IMX_EPIT(opaque);
uint32_t reg_value = 0;
uint32_t reg = offset >> 2;
switch (reg) {
case 0: /* Control Register */
reg_value = s->cr;
break;
case 1: /* Status Register */
reg_value = s->sr;
break;
case 2: /* LR - ticks*/
reg_value = s->lr;
break;
case 3: /* CMP */
reg_value = s->cmp;
break;
case 4: /* CNT */
imx_epit_update_count(s);
reg_value = s->cnt;
break;
default:
IPRINTF("Bad offset %x\n", reg);
break;
}
DPRINTF("(%s) = 0x%08x\n", imx_epit_reg_name(reg), reg_value);
return reg_value;
}
static void imx_epit_reload_compare_timer(IMXEPITState *s)
{
if ((s->cr & CR_OCIEN) && s->cmp) {
/* if the compare feature is on */
uint32_t tmp = imx_epit_update_count(s);
if (tmp > s->cmp) {
/* reinit the cmp timer if required */
ptimer_set_count(s->timer_cmp, tmp - s->cmp);
if ((s->cr & CR_EN)) {
/* Restart the cmp timer if required */
ptimer_run(s->timer_cmp, 0);
}
}
}
}
static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
IMXEPITState *s = IMX_EPIT(opaque);
uint32_t reg = offset >> 2;
DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(reg), (uint32_t)value);
switch (reg) {
case 0: /* CR */
s->cr = value & 0x03ffffff;
if (s->cr & CR_SWR) {
/* handle the reset */
imx_epit_reset(DEVICE(s));
} else {
imx_epit_set_freq(s);
}
if (s->freq && (s->cr & CR_EN)) {
if (s->cr & CR_ENMOD) {
if (s->cr & CR_RLD) {
ptimer_set_limit(s->timer_reload, s->lr, 1);
} else {
ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
}
}
imx_epit_reload_compare_timer(s);
ptimer_run(s->timer_reload, 1);
} else {
/* stop both timers */
ptimer_stop(s->timer_reload);
ptimer_stop(s->timer_cmp);
}
break;
case 1: /* SR - ACK*/
/* writing 1 to OCIF clear the OCIF bit */
if (value & 0x01) {
s->sr = 0;
imx_epit_update_int(s);
}
break;
case 2: /* LR - set ticks */
s->lr = value;
if (s->cr & CR_RLD) {
/* Also set the limit if the LRD bit is set */
/* If IOVW bit is set then set the timer value */
ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
} else if (s->cr & CR_IOVW) {
/* If IOVW bit is set then set the timer value */
ptimer_set_count(s->timer_reload, s->lr);
}
imx_epit_reload_compare_timer(s);
break;
case 3: /* CMP */
s->cmp = value;
imx_epit_reload_compare_timer(s);
break;
default:
IPRINTF("Bad offset %x\n", reg);
break;
}
}
static void imx_epit_timeout(void *opaque)
{
IMXEPITState *s = IMX_EPIT(opaque);
DPRINTF("\n");
if (!(s->cr & CR_EN)) {
return;
}
if (s->cr & CR_RLD) {
ptimer_set_limit(s->timer_reload, s->lr, 1);
} else {
ptimer_set_limit(s->timer_reload, TIMER_MAX, 1);
}
if (s->cr & CR_OCIEN) {
/* if compare register is 0 then we handle the interrupt here */
if (s->cmp == 0) {
s->sr = 1;
imx_epit_update_int(s);
} else if (s->cmp <= s->lr) {
/* We should launch the compare register */
ptimer_set_count(s->timer_cmp, s->lr - s->cmp);
ptimer_run(s->timer_cmp, 0);
} else {
IPRINTF("s->lr < s->cmp\n");
}
}
}
static void imx_epit_cmp(void *opaque)
{
IMXEPITState *s = IMX_EPIT(opaque);
DPRINTF("\n");
ptimer_stop(s->timer_cmp);
/* compare register is not 0 */
if (s->cmp) {
s->sr = 1;
imx_epit_update_int(s);
}
}
void imx_timerp_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm)
{
IMXEPITState *pp;
DeviceState *dev;
dev = sysbus_create_simple(TYPE_IMX_EPIT, addr, irq);
pp = IMX_EPIT(dev);
pp->ccm = ccm;
}
static const MemoryRegionOps imx_epit_ops = {
.read = imx_epit_read,
.write = imx_epit_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static const VMStateDescription vmstate_imx_timer_epit = {
.name = "imx.epit",
.version_id = 2,
.minimum_version_id = 2,
.minimum_version_id_old = 2,
.fields = (VMStateField[]) {
VMSTATE_UINT32(cr, IMXEPITState),
VMSTATE_UINT32(sr, IMXEPITState),
VMSTATE_UINT32(lr, IMXEPITState),
VMSTATE_UINT32(cmp, IMXEPITState),
VMSTATE_UINT32(cnt, IMXEPITState),
VMSTATE_UINT32(freq, IMXEPITState),
VMSTATE_PTIMER(timer_reload, IMXEPITState),
VMSTATE_PTIMER(timer_cmp, IMXEPITState),
VMSTATE_END_OF_LIST()
}
};
static void imx_epit_realize(DeviceState *dev, Error **errp)
{
IMXEPITState *s = IMX_EPIT(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
QEMUBH *bh;
DPRINTF("\n");
sysbus_init_irq(sbd, &s->irq);
memory_region_init_io(&s->iomem, OBJECT(s), &imx_epit_ops, s, TYPE_IMX_EPIT,
0x00001000);
sysbus_init_mmio(sbd, &s->iomem);
bh = qemu_bh_new(imx_epit_timeout, s);
s->timer_reload = ptimer_init(bh);
bh = qemu_bh_new(imx_epit_cmp, s);
s->timer_cmp = ptimer_init(bh);
}
static void imx_epit_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = imx_epit_realize;
dc->reset = imx_epit_reset;
dc->vmsd = &vmstate_imx_timer_epit;
dc->desc = "i.MX periodic timer";
}
static const TypeInfo imx_epit_info = {
.name = TYPE_IMX_EPIT,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(IMXEPITState),
.class_init = imx_epit_class_init,
};
static void imx_epit_register_types(void)
{
type_register_static(&imx_epit_info);
}
type_init(imx_epit_register_types)