qemu-e2k/hw/mst_fpga.c
Stefan Weil ff2712ba89 Fix typos in comments (interupt -> interrupt)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-08 10:02:17 +01:00

256 lines
5.7 KiB
C

/*
* PXA270-based Intel Mainstone platforms.
* FPGA driver
*
* Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
* <akuster@mvista.com>
*
* This code is licensed under the GNU GPL v2.
*/
#include "hw.h"
#include "sysbus.h"
/* Mainstone FPGA for extern irqs */
#define FPGA_GPIO_PIN 0
#define MST_NUM_IRQS 16
#define MST_LEDDAT1 0x10
#define MST_LEDDAT2 0x14
#define MST_LEDCTRL 0x40
#define MST_GPSWR 0x60
#define MST_MSCWR1 0x80
#define MST_MSCWR2 0x84
#define MST_MSCWR3 0x88
#define MST_MSCRD 0x90
#define MST_INTMSKENA 0xc0
#define MST_INTSETCLR 0xd0
#define MST_PCMCIA0 0xe0
#define MST_PCMCIA1 0xe4
#define MST_PCMCIAx_READY (1 << 10)
#define MST_PCMCIAx_nCD (1 << 5)
#define MST_PCMCIA_CD0_IRQ 9
#define MST_PCMCIA_CD1_IRQ 13
typedef struct mst_irq_state{
SysBusDevice busdev;
qemu_irq parent;
uint32_t prev_level;
uint32_t leddat1;
uint32_t leddat2;
uint32_t ledctrl;
uint32_t gpswr;
uint32_t mscwr1;
uint32_t mscwr2;
uint32_t mscwr3;
uint32_t mscrd;
uint32_t intmskena;
uint32_t intsetclr;
uint32_t pcmcia0;
uint32_t pcmcia1;
}mst_irq_state;
static void
mst_fpga_set_irq(void *opaque, int irq, int level)
{
mst_irq_state *s = (mst_irq_state *)opaque;
uint32_t oldint = s->intsetclr & s->intmskena;
if (level)
s->prev_level |= 1u << irq;
else
s->prev_level &= ~(1u << irq);
switch(irq) {
case MST_PCMCIA_CD0_IRQ:
if (level)
s->pcmcia0 &= ~MST_PCMCIAx_nCD;
else
s->pcmcia0 |= MST_PCMCIAx_nCD;
break;
case MST_PCMCIA_CD1_IRQ:
if (level)
s->pcmcia1 &= ~MST_PCMCIAx_nCD;
else
s->pcmcia1 |= MST_PCMCIAx_nCD;
break;
}
if ((s->intmskena & (1u << irq)) && level)
s->intsetclr |= 1u << irq;
if (oldint != (s->intsetclr & s->intmskena))
qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
}
static uint32_t
mst_fpga_readb(void *opaque, target_phys_addr_t addr)
{
mst_irq_state *s = (mst_irq_state *) opaque;
switch (addr) {
case MST_LEDDAT1:
return s->leddat1;
case MST_LEDDAT2:
return s->leddat2;
case MST_LEDCTRL:
return s->ledctrl;
case MST_GPSWR:
return s->gpswr;
case MST_MSCWR1:
return s->mscwr1;
case MST_MSCWR2:
return s->mscwr2;
case MST_MSCWR3:
return s->mscwr3;
case MST_MSCRD:
return s->mscrd;
case MST_INTMSKENA:
return s->intmskena;
case MST_INTSETCLR:
return s->intsetclr;
case MST_PCMCIA0:
return s->pcmcia0;
case MST_PCMCIA1:
return s->pcmcia1;
default:
printf("Mainstone - mst_fpga_readb: Bad register offset "
"0x" TARGET_FMT_plx " \n", addr);
}
return 0;
}
static void
mst_fpga_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
{
mst_irq_state *s = (mst_irq_state *) opaque;
value &= 0xffffffff;
switch (addr) {
case MST_LEDDAT1:
s->leddat1 = value;
break;
case MST_LEDDAT2:
s->leddat2 = value;
break;
case MST_LEDCTRL:
s->ledctrl = value;
break;
case MST_GPSWR:
s->gpswr = value;
break;
case MST_MSCWR1:
s->mscwr1 = value;
break;
case MST_MSCWR2:
s->mscwr2 = value;
break;
case MST_MSCWR3:
s->mscwr3 = value;
break;
case MST_MSCRD:
s->mscrd = value;
break;
case MST_INTMSKENA: /* Mask interrupt */
s->intmskena = (value & 0xFEEFF);
qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
break;
case MST_INTSETCLR: /* clear or set interrupt */
s->intsetclr = (value & 0xFEEFF);
qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
break;
/* For PCMCIAx allow the to change only power and reset */
case MST_PCMCIA0:
s->pcmcia0 = (value & 0x1f) | (s->pcmcia0 & ~0x1f);
break;
case MST_PCMCIA1:
s->pcmcia1 = (value & 0x1f) | (s->pcmcia1 & ~0x1f);
break;
default:
printf("Mainstone - mst_fpga_writeb: Bad register offset "
"0x" TARGET_FMT_plx " \n", addr);
}
}
static CPUReadMemoryFunc * const mst_fpga_readfn[] = {
mst_fpga_readb,
mst_fpga_readb,
mst_fpga_readb,
};
static CPUWriteMemoryFunc * const mst_fpga_writefn[] = {
mst_fpga_writeb,
mst_fpga_writeb,
mst_fpga_writeb,
};
static int mst_fpga_post_load(void *opaque, int version_id)
{
mst_irq_state *s = (mst_irq_state *) opaque;
qemu_set_irq(s->parent, s->intsetclr & s->intmskena);
return 0;
}
static int mst_fpga_init(SysBusDevice *dev)
{
mst_irq_state *s;
int iomemtype;
s = FROM_SYSBUS(mst_irq_state, dev);
s->pcmcia0 = MST_PCMCIAx_READY | MST_PCMCIAx_nCD;
s->pcmcia1 = MST_PCMCIAx_READY | MST_PCMCIAx_nCD;
sysbus_init_irq(dev, &s->parent);
/* alloc the external 16 irqs */
qdev_init_gpio_in(&dev->qdev, mst_fpga_set_irq, MST_NUM_IRQS);
iomemtype = cpu_register_io_memory(mst_fpga_readfn,
mst_fpga_writefn, s, DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, 0x00100000, iomemtype);
return 0;
}
static VMStateDescription vmstate_mst_fpga_regs = {
.name = "mainstone_fpga",
.version_id = 0,
.minimum_version_id = 0,
.minimum_version_id_old = 0,
.post_load = mst_fpga_post_load,
.fields = (VMStateField []) {
VMSTATE_UINT32(prev_level, mst_irq_state),
VMSTATE_UINT32(leddat1, mst_irq_state),
VMSTATE_UINT32(leddat2, mst_irq_state),
VMSTATE_UINT32(ledctrl, mst_irq_state),
VMSTATE_UINT32(gpswr, mst_irq_state),
VMSTATE_UINT32(mscwr1, mst_irq_state),
VMSTATE_UINT32(mscwr2, mst_irq_state),
VMSTATE_UINT32(mscwr3, mst_irq_state),
VMSTATE_UINT32(mscrd, mst_irq_state),
VMSTATE_UINT32(intmskena, mst_irq_state),
VMSTATE_UINT32(intsetclr, mst_irq_state),
VMSTATE_UINT32(pcmcia0, mst_irq_state),
VMSTATE_UINT32(pcmcia1, mst_irq_state),
VMSTATE_END_OF_LIST(),
},
};
static SysBusDeviceInfo mst_fpga_info = {
.init = mst_fpga_init,
.qdev.name = "mainstone-fpga",
.qdev.desc = "Mainstone II FPGA",
.qdev.size = sizeof(mst_irq_state),
.qdev.vmsd = &vmstate_mst_fpga_regs,
};
static void mst_fpga_register(void)
{
sysbus_register_withprop(&mst_fpga_info);
}
device_init(mst_fpga_register);