OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
682aea0eaa
qemu-e2k/hw/eccmemctl.c
Jan Kiszka 8217606e6e Introduce reset notifier order 
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.

Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:34 -05:00

341 lines
11 KiB
C
Raw Blame History

/*
* QEMU Sparc Sun4m ECC memory controller emulation
*
* Copyright (c) 2007 Robert Reif
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw.h"
#include "sun4m.h"
#include "sysemu.h"
//#define DEBUG_ECC
#ifdef DEBUG_ECC
#define DPRINTF(fmt, ...) \
do { printf("ECC: " fmt , ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(fmt, ...)
#endif
/* There are 3 versions of this chip used in SMP sun4m systems:
* MCC (version 0, implementation 0) SS-600MP
* EMC (version 0, implementation 1) SS-10
* SMC (version 0, implementation 2) SS-10SX and SS-20
*/
#define ECC_MCC 0x00000000
#define ECC_EMC 0x10000000
#define ECC_SMC 0x20000000
/* Register indexes */
#define ECC_MER 0 /* Memory Enable Register */
#define ECC_MDR 1 /* Memory Delay Register */
#define ECC_MFSR 2 /* Memory Fault Status Register */
#define ECC_VCR 3 /* Video Configuration Register */
#define ECC_MFAR0 4 /* Memory Fault Address Register 0 */
#define ECC_MFAR1 5 /* Memory Fault Address Register 1 */
#define ECC_DR 6 /* Diagnostic Register */
#define ECC_ECR0 7 /* Event Count Register 0 */
#define ECC_ECR1 8 /* Event Count Register 1 */
/* ECC fault control register */
#define ECC_MER_EE 0x00000001 /* Enable ECC checking */
#define ECC_MER_EI 0x00000002 /* Enable Interrupts on
correctable errors */
#define ECC_MER_MRR0 0x00000004 /* SIMM 0 */
#define ECC_MER_MRR1 0x00000008 /* SIMM 1 */
#define ECC_MER_MRR2 0x00000010 /* SIMM 2 */
#define ECC_MER_MRR3 0x00000020 /* SIMM 3 */
#define ECC_MER_MRR4 0x00000040 /* SIMM 4 */
#define ECC_MER_MRR5 0x00000080 /* SIMM 5 */
#define ECC_MER_MRR6 0x00000100 /* SIMM 6 */
#define ECC_MER_MRR7 0x00000200 /* SIMM 7 */
#define ECC_MER_REU 0x00000100 /* Memory Refresh Enable (600MP) */
#define ECC_MER_MRR 0x000003fc /* MRR mask */
#define ECC_MER_A 0x00000400 /* Memory controller addr map select */
#define ECC_MER_DCI 0x00000800 /* Disables Coherent Invalidate ACK */
#define ECC_MER_VER 0x0f000000 /* Version */
#define ECC_MER_IMPL 0xf0000000 /* Implementation */
#define ECC_MER_MASK_0 0x00000103 /* Version 0 (MCC) mask */
#define ECC_MER_MASK_1 0x00000bff /* Version 1 (EMC) mask */
#define ECC_MER_MASK_2 0x00000bff /* Version 2 (SMC) mask */
/* ECC memory delay register */
#define ECC_MDR_RRI 0x000003ff /* Refresh Request Interval */
#define ECC_MDR_MI 0x00001c00 /* MIH Delay */
#define ECC_MDR_CI 0x0000e000 /* Coherent Invalidate Delay */
#define ECC_MDR_MDL 0x001f0000 /* MBus Master arbitration delay */
#define ECC_MDR_MDH 0x03e00000 /* MBus Master arbitration delay */
#define ECC_MDR_GAD 0x7c000000 /* Graphics Arbitration Delay */
#define ECC_MDR_RSC 0x80000000 /* Refresh load control */
#define ECC_MDR_MASK 0x7fffffff
/* ECC fault status register */
#define ECC_MFSR_CE 0x00000001 /* Correctable error */
#define ECC_MFSR_BS 0x00000002 /* C2 graphics bad slot access */
#define ECC_MFSR_TO 0x00000004 /* Timeout on write */
#define ECC_MFSR_UE 0x00000008 /* Uncorrectable error */
#define ECC_MFSR_DW 0x000000f0 /* Index of double word in block */
#define ECC_MFSR_SYND 0x0000ff00 /* Syndrome for correctable error */
#define ECC_MFSR_ME 0x00010000 /* Multiple errors */
#define ECC_MFSR_C2ERR 0x00020000 /* C2 graphics error */
/* ECC fault address register 0 */
#define ECC_MFAR0_PADDR 0x0000000f /* PA[32-35] */
#define ECC_MFAR0_TYPE 0x000000f0 /* Transaction type */
#define ECC_MFAR0_SIZE 0x00000700 /* Transaction size */
#define ECC_MFAR0_CACHE 0x00000800 /* Mapped cacheable */
#define ECC_MFAR0_LOCK 0x00001000 /* Error occurred in atomic cycle */
#define ECC_MFAR0_BMODE 0x00002000 /* Boot mode */
#define ECC_MFAR0_VADDR 0x003fc000 /* VA[12-19] (superset bits) */
#define ECC_MFAR0_S 0x08000000 /* Supervisor mode */
#define ECC_MFARO_MID 0xf0000000 /* Module ID */
/* ECC diagnostic register */
#define ECC_DR_CBX 0x00000001
#define ECC_DR_CB0 0x00000002
#define ECC_DR_CB1 0x00000004
#define ECC_DR_CB2 0x00000008
#define ECC_DR_CB4 0x00000010
#define ECC_DR_CB8 0x00000020
#define ECC_DR_CB16 0x00000040
#define ECC_DR_CB32 0x00000080
#define ECC_DR_DMODE 0x00000c00
#define ECC_NREGS 9
#define ECC_SIZE (ECC_NREGS * sizeof(uint32_t))
#define ECC_DIAG_SIZE 4
#define ECC_DIAG_MASK (ECC_DIAG_SIZE - 1)
typedef struct ECCState {
qemu_irq irq;
uint32_t regs[ECC_NREGS];
uint8_t diag[ECC_DIAG_SIZE];
uint32_t version;
} ECCState;
static void ecc_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
{
ECCState *s = opaque;
switch (addr >> 2) {
case ECC_MER:
if (s->version == ECC_MCC)
s->regs[ECC_MER] = (val & ECC_MER_MASK_0);
else if (s->version == ECC_EMC)
s->regs[ECC_MER] = s->version | (val & ECC_MER_MASK_1);
else if (s->version == ECC_SMC)
s->regs[ECC_MER] = s->version | (val & ECC_MER_MASK_2);
DPRINTF("Write memory enable %08x\n", val);
break;
case ECC_MDR:
s->regs[ECC_MDR] = val & ECC_MDR_MASK;
DPRINTF("Write memory delay %08x\n", val);
break;
case ECC_MFSR:
s->regs[ECC_MFSR] = val;
qemu_irq_lower(s->irq);
DPRINTF("Write memory fault status %08x\n", val);
break;
case ECC_VCR:
s->regs[ECC_VCR] = val;
DPRINTF("Write slot configuration %08x\n", val);
break;
case ECC_DR:
s->regs[ECC_DR] = val;
DPRINTF("Write diagnostic %08x\n", val);
break;
case ECC_ECR0:
s->regs[ECC_ECR0] = val;
DPRINTF("Write event count 1 %08x\n", val);
break;
case ECC_ECR1:
s->regs[ECC_ECR0] = val;
DPRINTF("Write event count 2 %08x\n", val);
break;
}
}
static uint32_t ecc_mem_readl(void *opaque, target_phys_addr_t addr)
{
ECCState *s = opaque;
uint32_t ret = 0;
switch (addr >> 2) {
case ECC_MER:
ret = s->regs[ECC_MER];
DPRINTF("Read memory enable %08x\n", ret);
break;
case ECC_MDR:
ret = s->regs[ECC_MDR];
DPRINTF("Read memory delay %08x\n", ret);
break;
case ECC_MFSR:
ret = s->regs[ECC_MFSR];
DPRINTF("Read memory fault status %08x\n", ret);
break;
case ECC_VCR:
ret = s->regs[ECC_VCR];
DPRINTF("Read slot configuration %08x\n", ret);
break;
case ECC_MFAR0:
ret = s->regs[ECC_MFAR0];
DPRINTF("Read memory fault address 0 %08x\n", ret);
break;
case ECC_MFAR1:
ret = s->regs[ECC_MFAR1];
DPRINTF("Read memory fault address 1 %08x\n", ret);
break;
case ECC_DR:
ret = s->regs[ECC_DR];
DPRINTF("Read diagnostic %08x\n", ret);
break;
case ECC_ECR0:
ret = s->regs[ECC_ECR0];
DPRINTF("Read event count 1 %08x\n", ret);
break;
case ECC_ECR1:
ret = s->regs[ECC_ECR0];
DPRINTF("Read event count 2 %08x\n", ret);
break;
}
return ret;
}
static CPUReadMemoryFunc *ecc_mem_read[3] = {
NULL,
NULL,
ecc_mem_readl,
};
static CPUWriteMemoryFunc *ecc_mem_write[3] = {
NULL,
NULL,
ecc_mem_writel,
};
static void ecc_diag_mem_writeb(void *opaque, target_phys_addr_t addr,
uint32_t val)
{
ECCState *s = opaque;
DPRINTF("Write diagnostic[%d] = %02x\n", (int)addr, val);
s->diag[addr & ECC_DIAG_MASK] = val;
}
static uint32_t ecc_diag_mem_readb(void *opaque, target_phys_addr_t addr)
{
ECCState *s = opaque;
uint32_t ret = s->diag[(int)addr];
DPRINTF("Read diagnostic[%d] = %02x\n", (int)addr, ret);
return ret;
}
static CPUReadMemoryFunc *ecc_diag_mem_read[3] = {
ecc_diag_mem_readb,
NULL,
NULL,
};
static CPUWriteMemoryFunc *ecc_diag_mem_write[3] = {
ecc_diag_mem_writeb,
NULL,
NULL,
};
static int ecc_load(QEMUFile *f, void *opaque, int version_id)
{
ECCState *s = opaque;
int i;
if (version_id != 3)
return -EINVAL;
for (i = 0; i < ECC_NREGS; i++)
qemu_get_be32s(f, &s->regs[i]);
for (i = 0; i < ECC_DIAG_SIZE; i++)
qemu_get_8s(f, &s->diag[i]);
qemu_get_be32s(f, &s->version);
return 0;
}
static void ecc_save(QEMUFile *f, void *opaque)
{
ECCState *s = opaque;
int i;
for (i = 0; i < ECC_NREGS; i++)
qemu_put_be32s(f, &s->regs[i]);
for (i = 0; i < ECC_DIAG_SIZE; i++)
qemu_put_8s(f, &s->diag[i]);
qemu_put_be32s(f, &s->version);
}
static void ecc_reset(void *opaque)
{
ECCState *s = opaque;
if (s->version == ECC_MCC)
s->regs[ECC_MER] &= ECC_MER_REU;
else
s->regs[ECC_MER] &= (ECC_MER_VER | ECC_MER_IMPL | ECC_MER_MRR |
ECC_MER_DCI);
s->regs[ECC_MDR] = 0x20;
s->regs[ECC_MFSR] = 0;
s->regs[ECC_VCR] = 0;
s->regs[ECC_MFAR0] = 0x07c00000;
s->regs[ECC_MFAR1] = 0;
s->regs[ECC_DR] = 0;
s->regs[ECC_ECR0] = 0;
s->regs[ECC_ECR1] = 0;
}
void * ecc_init(target_phys_addr_t base, qemu_irq irq, uint32_t version)
{
int ecc_io_memory;
ECCState *s;
s = qemu_mallocz(sizeof(ECCState));
s->version = version;
s->regs[0] = version;
s->irq = irq;
ecc_io_memory = cpu_register_io_memory(0, ecc_mem_read, ecc_mem_write, s);
cpu_register_physical_memory(base, ECC_SIZE, ecc_io_memory);
if (version == ECC_MCC) { // SS-600MP only
ecc_io_memory = cpu_register_io_memory(0, ecc_diag_mem_read,
ecc_diag_mem_write, s);
cpu_register_physical_memory(base + 0x1000, ECC_DIAG_SIZE,
ecc_io_memory);
}
register_savevm("ECC", base, 3, ecc_save, ecc_load, s);
qemu_register_reset(ecc_reset, 0, s);
ecc_reset(s);
return s;
}
Reference in New Issue View Git Blame Copy Permalink