qemu-e2k/hw/timer/imx_epit.c
Peter Maydell 13557fd392 hw/timer/imx_epit: Avoid assertion when CR.SWR is written
The imx_epit device has a software-controllable reset triggered by
setting the SWR bit in the CR register. An error in commit cc2722ec83
means that we will end up assert()ing if the guest does this, because
the code in imx_epit_write() starts ptimer transactions, and then
imx_epit_reset() also starts ptimer transactions, triggering
"ptimer_transaction_begin: Assertion `!s->in_transaction' failed".

The cleanest way to avoid this double-transaction is to move the
start-transaction for the CR write handling down below the check of
the SWR bit.

Fixes: https://bugs.launchpad.net/qemu/+bug/1880424
Fixes: cc2722ec83
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200727154550.3409-1-peter.maydell@linaro.org
2020-08-03 17:56:11 +01:00

378 lines
10 KiB
C

/*
* IMX EPIT Timer
*
* Copyright (c) 2008 OK Labs
* Copyright (c) 2011 NICTA Pty Ltd
* Originally written by Hans Jiang
* Updated by Peter Chubb
* Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
*
* This code is licensed under GPL version 2 or later. See
* the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "hw/timer/imx_epit.h"
#include "migration/vmstate.h"
#include "hw/irq.h"
#include "hw/misc/imx_ccm.h"
#include "qemu/module.h"
#include "qemu/log.h"
#ifndef DEBUG_IMX_EPIT
#define DEBUG_IMX_EPIT 0
#endif
#define DPRINTF(fmt, args...) \
do { \
if (DEBUG_IMX_EPIT) { \
fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_EPIT, \
__func__, ##args); \
} \
} while (0)
static const char *imx_epit_reg_name(uint32_t reg)
{
switch (reg) {
case 0:
return "CR";
case 1:
return "SR";
case 2:
return "LR";
case 3:
return "CMP";
case 4:
return "CNT";
default:
return "[?]";
}
}
/*
* Exact clock frequencies vary from board to board.
* These are typical.
*/
static const IMXClk imx_epit_clocks[] = {
CLK_NONE, /* 00 disabled */
CLK_IPG, /* 01 ipg_clk, ~532MHz */
CLK_IPG_HIGH, /* 10 ipg_clk_highfreq */
CLK_32k, /* 11 ipg_clk_32k -- ~32kHz */
};
/*
* Update interrupt status
*/
static void imx_epit_update_int(IMXEPITState *s)
{
if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
}
/*
* Must be called from within a ptimer_transaction_begin/commit block
* for both s->timer_cmp and s->timer_reload.
*/
static void imx_epit_set_freq(IMXEPITState *s)
{
uint32_t clksrc;
uint32_t prescaler;
clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2);
prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12);
s->freq = imx_ccm_get_clock_frequency(s->ccm,
imx_epit_clocks[clksrc]) / prescaler;
DPRINTF("Setting ptimer frequency to %u\n", s->freq);
if (s->freq) {
ptimer_set_freq(s->timer_reload, s->freq);
ptimer_set_freq(s->timer_cmp, s->freq);
}
}
static void imx_epit_reset(DeviceState *dev)
{
IMXEPITState *s = IMX_EPIT(dev);
/*
* Soft reset doesn't touch some bits; hard reset clears them
*/
s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN);
s->sr = 0;
s->lr = EPIT_TIMER_MAX;
s->cmp = 0;
s->cnt = 0;
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
/* stop both timers */
ptimer_stop(s->timer_cmp);
ptimer_stop(s->timer_reload);
/* compute new frequency */
imx_epit_set_freq(s);
/* init both timers to EPIT_TIMER_MAX */
ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
if (s->freq && (s->cr & CR_EN)) {
/* if the timer is still enabled, restart it */
ptimer_run(s->timer_reload, 0);
}
ptimer_transaction_commit(s->timer_cmp);
ptimer_transaction_commit(s->timer_reload);
}
static uint32_t imx_epit_update_count(IMXEPITState *s)
{
s->cnt = ptimer_get_count(s->timer_reload);
return s->cnt;
}
static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size)
{
IMXEPITState *s = IMX_EPIT(opaque);
uint32_t reg_value = 0;
switch (offset >> 2) {
case 0: /* Control Register */
reg_value = s->cr;
break;
case 1: /* Status Register */
reg_value = s->sr;
break;
case 2: /* LR - ticks*/
reg_value = s->lr;
break;
case 3: /* CMP */
reg_value = s->cmp;
break;
case 4: /* CNT */
imx_epit_update_count(s);
reg_value = s->cnt;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);
break;
}
DPRINTF("(%s) = 0x%08x\n", imx_epit_reg_name(offset >> 2), reg_value);
return reg_value;
}
/* Must be called from ptimer_transaction_begin/commit block for s->timer_cmp */
static void imx_epit_reload_compare_timer(IMXEPITState *s)
{
if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) {
/* if the compare feature is on and timers are running */
uint32_t tmp = imx_epit_update_count(s);
uint64_t next;
if (tmp > s->cmp) {
/* It'll fire in this round of the timer */
next = tmp - s->cmp;
} else { /* catch it next time around */
next = tmp - s->cmp + ((s->cr & CR_RLD) ? EPIT_TIMER_MAX : s->lr);
}
ptimer_set_count(s->timer_cmp, next);
}
}
static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
IMXEPITState *s = IMX_EPIT(opaque);
uint64_t oldcr;
DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(offset >> 2),
(uint32_t)value);
switch (offset >> 2) {
case 0: /* CR */
oldcr = s->cr;
s->cr = value & 0x03ffffff;
if (s->cr & CR_SWR) {
/* handle the reset */
imx_epit_reset(DEVICE(s));
/*
* TODO: could we 'break' here? following operations appear
* to duplicate the work imx_epit_reset() already did.
*/
}
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
if (!(s->cr & CR_SWR)) {
imx_epit_set_freq(s);
}
if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) {
if (s->cr & CR_ENMOD) {
if (s->cr & CR_RLD) {
ptimer_set_limit(s->timer_reload, s->lr, 1);
ptimer_set_limit(s->timer_cmp, s->lr, 1);
} else {
ptimer_set_limit(s->timer_reload, EPIT_TIMER_MAX, 1);
ptimer_set_limit(s->timer_cmp, EPIT_TIMER_MAX, 1);
}
}
imx_epit_reload_compare_timer(s);
ptimer_run(s->timer_reload, 0);
if (s->cr & CR_OCIEN) {
ptimer_run(s->timer_cmp, 0);
} else {
ptimer_stop(s->timer_cmp);
}
} else if (!(s->cr & CR_EN)) {
/* stop both timers */
ptimer_stop(s->timer_reload);
ptimer_stop(s->timer_cmp);
} else if (s->cr & CR_OCIEN) {
if (!(oldcr & CR_OCIEN)) {
imx_epit_reload_compare_timer(s);
ptimer_run(s->timer_cmp, 0);
}
} else {
ptimer_stop(s->timer_cmp);
}
ptimer_transaction_commit(s->timer_cmp);
ptimer_transaction_commit(s->timer_reload);
break;
case 1: /* SR - ACK*/
/* writing 1 to OCIF clear the OCIF bit */
if (value & 0x01) {
s->sr = 0;
imx_epit_update_int(s);
}
break;
case 2: /* LR - set ticks */
s->lr = value;
ptimer_transaction_begin(s->timer_cmp);
ptimer_transaction_begin(s->timer_reload);
if (s->cr & CR_RLD) {
/* Also set the limit if the LRD bit is set */
/* If IOVW bit is set then set the timer value */
ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW);
ptimer_set_limit(s->timer_cmp, s->lr, 0);
} else if (s->cr & CR_IOVW) {
/* If IOVW bit is set then set the timer value */
ptimer_set_count(s->timer_reload, s->lr);
}
imx_epit_reload_compare_timer(s);
ptimer_transaction_commit(s->timer_cmp);
ptimer_transaction_commit(s->timer_reload);
break;
case 3: /* CMP */
s->cmp = value;
ptimer_transaction_begin(s->timer_cmp);
imx_epit_reload_compare_timer(s);
ptimer_transaction_commit(s->timer_cmp);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
HWADDR_PRIx "\n", TYPE_IMX_EPIT, __func__, offset);
break;
}
}
static void imx_epit_cmp(void *opaque)
{
IMXEPITState *s = IMX_EPIT(opaque);
DPRINTF("sr was %d\n", s->sr);
s->sr = 1;
imx_epit_update_int(s);
}
static void imx_epit_reload(void *opaque)
{
/* No action required on rollover of timer_reload */
}
static const MemoryRegionOps imx_epit_ops = {
.read = imx_epit_read,
.write = imx_epit_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static const VMStateDescription vmstate_imx_timer_epit = {
.name = TYPE_IMX_EPIT,
.version_id = 2,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
VMSTATE_UINT32(cr, IMXEPITState),
VMSTATE_UINT32(sr, IMXEPITState),
VMSTATE_UINT32(lr, IMXEPITState),
VMSTATE_UINT32(cmp, IMXEPITState),
VMSTATE_UINT32(cnt, IMXEPITState),
VMSTATE_UINT32(freq, IMXEPITState),
VMSTATE_PTIMER(timer_reload, IMXEPITState),
VMSTATE_PTIMER(timer_cmp, IMXEPITState),
VMSTATE_END_OF_LIST()
}
};
static void imx_epit_realize(DeviceState *dev, Error **errp)
{
IMXEPITState *s = IMX_EPIT(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
DPRINTF("\n");
sysbus_init_irq(sbd, &s->irq);
memory_region_init_io(&s->iomem, OBJECT(s), &imx_epit_ops, s, TYPE_IMX_EPIT,
0x00001000);
sysbus_init_mmio(sbd, &s->iomem);
s->timer_reload = ptimer_init(imx_epit_reload, s, PTIMER_POLICY_DEFAULT);
s->timer_cmp = ptimer_init(imx_epit_cmp, s, PTIMER_POLICY_DEFAULT);
}
static void imx_epit_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = imx_epit_realize;
dc->reset = imx_epit_reset;
dc->vmsd = &vmstate_imx_timer_epit;
dc->desc = "i.MX periodic timer";
}
static const TypeInfo imx_epit_info = {
.name = TYPE_IMX_EPIT,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(IMXEPITState),
.class_init = imx_epit_class_init,
};
static void imx_epit_register_types(void)
{
type_register_static(&imx_epit_info);
}
type_init(imx_epit_register_types)