qemu-e2k/hw/misc/mac_via.c
Laurent Vivier 87a34e2adb hw/m68k: implement ADB bus support for via
VIA needs to be able to poll the ADB interface and to read/write data
from/to the bus.

This patch adds functions allowing that.

Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-7-laurent@vivier.eu>
2019-10-28 19:06:45 +01:00

965 lines
32 KiB
C

/*
* QEMU m68k Macintosh VIA device support
*
* Copyright (c) 2011-2018 Laurent Vivier
* Copyright (c) 2018 Mark Cave-Ayland
*
* Some parts from hw/misc/macio/cuda.c
*
* Copyright (c) 2004-2007 Fabrice Bellard
* Copyright (c) 2007 Jocelyn Mayer
*
* some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "migration/vmstate.h"
#include "hw/sysbus.h"
#include "hw/irq.h"
#include "qemu/timer.h"
#include "hw/misc/mac_via.h"
#include "hw/misc/mos6522.h"
#include "hw/input/adb.h"
#include "sysemu/runstate.h"
#include "qapi/error.h"
#include "qemu/cutils.h"
/*
* VIAs: There are two in every machine,
*/
#define VIA_SIZE (0x2000)
/*
* Not all of these are true post MacII I think.
* CSA: probably the ones CHRP marks as 'unused' change purposes
* when the IWM becomes the SWIM.
* http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
* ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
*
* also, http://developer.apple.com/technotes/hw/hw_09.html claims the
* following changes for IIfx:
* VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
* Also, "All of the functionality of VIA2 has been moved to other chips".
*/
#define VIA1A_vSccWrReq 0x80 /*
* SCC write. (input)
* [CHRP] SCC WREQ: Reflects the state of the
* Wait/Request pins from the SCC.
* [Macintosh Family Hardware]
* as CHRP on SE/30,II,IIx,IIcx,IIci.
* on IIfx, "0 means an active request"
*/
#define VIA1A_vRev8 0x40 /*
* Revision 8 board ???
* [CHRP] En WaitReqB: Lets the WaitReq_L
* signal from port B of the SCC appear on
* the PA7 input pin. Output.
* [Macintosh Family] On the SE/30, this
* is the bit to flip screen buffers.
* 0=alternate, 1=main.
* on II,IIx,IIcx,IIci,IIfx this is a bit
* for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
*/
#define VIA1A_vHeadSel 0x20 /*
* Head select for IWM.
* [CHRP] unused.
* [Macintosh Family] "Floppy disk
* state-control line SEL" on all but IIfx
*/
#define VIA1A_vOverlay 0x10 /*
* [Macintosh Family] On SE/30,II,IIx,IIcx
* this bit enables the "Overlay" address
* map in the address decoders as it is on
* reset for mapping the ROM over the reset
* vector. 1=use overlay map.
* On the IIci,IIfx it is another bit of the
* CPU ID: 0=normal IIci, 1=IIci with parity
* feature or IIfx.
* [CHRP] En WaitReqA: Lets the WaitReq_L
* signal from port A of the SCC appear
* on the PA7 input pin (CHRP). Output.
* [MkLinux] "Drive Select"
* (with 0x20 being 'disk head select')
*/
#define VIA1A_vSync 0x08 /*
* [CHRP] Sync Modem: modem clock select:
* 1: select the external serial clock to
* drive the SCC's /RTxCA pin.
* 0: Select the 3.6864MHz clock to drive
* the SCC cell.
* [Macintosh Family] Correct on all but IIfx
*/
/*
* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
* on Macs which had the PWM sound hardware. Reserved on newer models.
* On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
* bit 2: 1=IIci, 0=IIfx
* bit 1: 1 on both IIci and IIfx.
* MkLinux sez bit 0 is 'burnin flag' in this case.
* CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
* inputs, these bits will read 0.
*/
#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
/*
* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
* CHRP offers no info.
*/
#define VIA1B_vSound 0x80 /*
* Sound enable (for compatibility with
* PWM hardware) 0=enabled.
* Also, on IIci w/parity, shows parity error
* 0=error, 1=OK.
*/
#define VIA1B_vMystery 0x40 /*
* On IIci, parity enable. 0=enabled,1=disabled
* On SE/30, vertical sync interrupt enable.
* 0=enabled. This vSync interrupt shows up
* as a slot $E interrupt.
*/
#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
/*
* VIA2 A register is the interrupt lines raised off the nubus
* slots.
* The below info is from 'Macintosh Family Hardware.'
* MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
* It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
* defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
* Perhaps OSS uses vRAM1 and vRAM2 for ADB.
*/
#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
/*
* RAM size bits decoded as follows:
* bit1 bit0 size of ICs in bank A
* 0 0 256 kbit
* 0 1 1 Mbit
* 1 0 4 Mbit
* 1 1 16 Mbit
*/
/*
* Register B has the fun stuff in it
*/
#define VIA2B_vVBL 0x80 /*
* VBL output to VIA1 (60.15Hz) driven by
* timer T1.
* on IIci, parity test: 0=test mode.
* [MkLinux] RBV_PARODD: 1=odd,0=even.
*/
#define VIA2B_vSndJck 0x40 /*
* External sound jack status.
* 0=plug is inserted. On SE/30, always 0
*/
#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
#define VIA2B_vMode32 0x08 /*
* 24/32bit switch - doubles as cache flush
* on II, AMU/PMMU control.
* if AMU, 0=24bit to 32bit translation
* if PMMU, 1=PMMU is accessing page table.
* on SE/30 tied low.
* on IIx,IIcx,IIfx, unused.
* on IIci/RBV, cache control. 0=flush cache.
*/
#define VIA2B_vPower 0x04 /*
* Power off, 0=shut off power.
* on SE/30 this signal sent to PDS card.
*/
#define VIA2B_vBusLk 0x02 /*
* Lock NuBus transactions, 0=locked.
* on SE/30 sent to PDS card.
*/
#define VIA2B_vCDis 0x01 /*
* Cache control. On IIci, 1=disable cache card
* on others, 0=disable processor's instruction
* and data caches.
*/
/* interrupt flags */
#define IRQ_SET 0x80
/* common */
#define VIA_IRQ_TIMER1 0x40
#define VIA_IRQ_TIMER2 0x20
/*
* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
* Another example of a valid function that has no ROM support is the use
* of the alternate video page for page-flipping animation. Since there
* is no ROM call to flip pages, it is necessary to go play with the
* right bit in the VIA chip (6522 Versatile Interface Adapter).
* [CSA: don't know which one this is, but it's one of 'em!]
*/
/*
* 6522 registers - see databook.
* CSA: Assignments for VIA1 confirmed from CHRP spec.
*/
/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
/* Note: 15 VIA regs, 8 RBV regs */
#define vBufB 0x0000 /* [VIA/RBV] Register B */
#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
#define vSR 0x1400 /* [VIA only] Shift register. */
#define vACR 0x1600 /* [VIA only] Auxilary control register. */
#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
/*
* CHRP sez never ever to *write* this.
* Mac family says never to *change* this.
* In fact we need to initialize it once at start.
*/
#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
/* from linux 2.6 drivers/macintosh/via-macii.c */
/* Bits in ACR */
#define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits */
#define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */
#define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */
/*
* Apple Macintosh Family Hardware Refenece
* Table 19-10 ADB transaction states
*/
#define ADB_STATE_NEW 0
#define ADB_STATE_EVEN 1
#define ADB_STATE_ODD 2
#define ADB_STATE_IDLE 3
#define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2)
#define VIA1B_vADB_StateShift 4
#define VIA_TIMER_FREQ (783360)
#define VIA_ADB_POLL_FREQ 50 /* XXX: not real */
/* VIA returns time offset from Jan 1, 1904, not 1970 */
#define RTC_OFFSET 2082844800
static void via1_VBL_update(MOS6522Q800VIA1State *v1s)
{
MOS6522State *s = MOS6522(v1s);
/* 60 Hz irq */
v1s->next_VBL = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630) /
16630 * 16630;
if (s->ier & VIA1_IRQ_VBLANK) {
timer_mod(v1s->VBL_timer, v1s->next_VBL);
} else {
timer_del(v1s->VBL_timer);
}
}
static void via1_one_second_update(MOS6522Q800VIA1State *v1s)
{
MOS6522State *s = MOS6522(v1s);
v1s->next_second = (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 1000) /
1000 * 1000;
if (s->ier & VIA1_IRQ_ONE_SECOND) {
timer_mod(v1s->one_second_timer, v1s->next_second);
} else {
timer_del(v1s->one_second_timer);
}
}
static void via1_VBL(void *opaque)
{
MOS6522Q800VIA1State *v1s = opaque;
MOS6522State *s = MOS6522(v1s);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
s->ifr |= VIA1_IRQ_VBLANK;
mdc->update_irq(s);
via1_VBL_update(v1s);
}
static void via1_one_second(void *opaque)
{
MOS6522Q800VIA1State *v1s = opaque;
MOS6522State *s = MOS6522(v1s);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
s->ifr |= VIA1_IRQ_ONE_SECOND;
mdc->update_irq(s);
via1_one_second_update(v1s);
}
static void via1_irq_request(void *opaque, int irq, int level)
{
MOS6522Q800VIA1State *v1s = opaque;
MOS6522State *s = MOS6522(v1s);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
if (level) {
s->ifr |= 1 << irq;
} else {
s->ifr &= ~(1 << irq);
}
mdc->update_irq(s);
}
static void via2_irq_request(void *opaque, int irq, int level)
{
MOS6522Q800VIA2State *v2s = opaque;
MOS6522State *s = MOS6522(v2s);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
if (level) {
s->ifr |= 1 << irq;
} else {
s->ifr &= ~(1 << irq);
}
mdc->update_irq(s);
}
static void via1_rtc_update(MacVIAState *m)
{
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
MOS6522State *s = MOS6522(v1s);
if (s->b & VIA1B_vRTCEnb) {
return;
}
if (s->dirb & VIA1B_vRTCData) {
/* send bits to the RTC */
if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) {
m->data_out <<= 1;
m->data_out |= s->b & VIA1B_vRTCData;
m->data_out_cnt++;
}
} else {
/* receive bits from the RTC */
if ((v1s->last_b & VIA1B_vRTCClk) &&
!(s->b & VIA1B_vRTCClk) &&
m->data_in_cnt) {
s->b = (s->b & ~VIA1B_vRTCData) |
((m->data_in >> 7) & VIA1B_vRTCData);
m->data_in <<= 1;
m->data_in_cnt--;
}
}
if (m->data_out_cnt == 8) {
m->data_out_cnt = 0;
if (m->cmd == 0) {
if (m->data_out & 0x80) {
/* this is a read command */
uint32_t time = m->tick_offset +
(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
NANOSECONDS_PER_SECOND);
if (m->data_out == 0x81) { /* seconds register 0 */
m->data_in = time & 0xff;
m->data_in_cnt = 8;
} else if (m->data_out == 0x85) { /* seconds register 1 */
m->data_in = (time >> 8) & 0xff;
m->data_in_cnt = 8;
} else if (m->data_out == 0x89) { /* seconds register 2 */
m->data_in = (time >> 16) & 0xff;
m->data_in_cnt = 8;
} else if (m->data_out == 0x8d) { /* seconds register 3 */
m->data_in = (time >> 24) & 0xff;
m->data_in_cnt = 8;
} else if ((m->data_out & 0xf3) == 0xa1) {
/* PRAM address 0x10 -> 0x13 */
int addr = (m->data_out >> 2) & 0x03;
m->data_in = v1s->PRAM[addr];
m->data_in_cnt = 8;
} else if ((m->data_out & 0xf3) == 0xa1) {
/* PRAM address 0x00 -> 0x0f */
int addr = (m->data_out >> 2) & 0x0f;
m->data_in = v1s->PRAM[addr];
m->data_in_cnt = 8;
} else if ((m->data_out & 0xf8) == 0xb8) {
/* extended memory designator and sector number */
m->cmd = m->data_out;
}
} else {
/* this is a write command */
m->cmd = m->data_out;
}
} else {
if (m->cmd & 0x80) {
if ((m->cmd & 0xf8) == 0xb8) {
/* extended memory designator and sector number */
int sector = m->cmd & 0x07;
int addr = (m->data_out >> 2) & 0x1f;
m->data_in = v1s->PRAM[sector * 8 + addr];
m->data_in_cnt = 8;
}
} else if (!m->wprotect) {
/* this is a write command */
if (m->alt != 0) {
/* extended memory designator and sector number */
int sector = m->cmd & 0x07;
int addr = (m->alt >> 2) & 0x1f;
v1s->PRAM[sector * 8 + addr] = m->data_out;
m->alt = 0;
} else if (m->cmd == 0x01) { /* seconds register 0 */
/* FIXME */
} else if (m->cmd == 0x05) { /* seconds register 1 */
/* FIXME */
} else if (m->cmd == 0x09) { /* seconds register 2 */
/* FIXME */
} else if (m->cmd == 0x0d) { /* seconds register 3 */
/* FIXME */
} else if (m->cmd == 0x31) {
/* Test Register */
} else if (m->cmd == 0x35) {
/* Write Protect register */
m->wprotect = m->data_out & 1;
} else if ((m->cmd & 0xf3) == 0xa1) {
/* PRAM address 0x10 -> 0x13 */
int addr = (m->cmd >> 2) & 0x03;
v1s->PRAM[addr] = m->data_out;
} else if ((m->cmd & 0xf3) == 0xa1) {
/* PRAM address 0x00 -> 0x0f */
int addr = (m->cmd >> 2) & 0x0f;
v1s->PRAM[addr] = m->data_out;
} else if ((m->cmd & 0xf8) == 0xb8) {
/* extended memory designator and sector number */
m->alt = m->cmd;
}
}
}
m->data_out = 0;
}
}
static int adb_via_poll(MacVIAState *s, int state, uint8_t *data)
{
if (state != ADB_STATE_IDLE) {
return 0;
}
if (s->adb_data_in_size < s->adb_data_in_index) {
return 0;
}
if (s->adb_data_out_index != 0) {
return 0;
}
s->adb_data_in_index = 0;
s->adb_data_out_index = 0;
s->adb_data_in_size = adb_poll(&s->adb_bus, s->adb_data_in, 0xffff);
if (s->adb_data_in_size) {
*data = s->adb_data_in[s->adb_data_in_index++];
qemu_irq_raise(s->adb_data_ready);
}
return s->adb_data_in_size;
}
static int adb_via_send(MacVIAState *s, int state, uint8_t data)
{
switch (state) {
case ADB_STATE_NEW:
s->adb_data_out_index = 0;
break;
case ADB_STATE_EVEN:
if ((s->adb_data_out_index & 1) == 0) {
return 0;
}
break;
case ADB_STATE_ODD:
if (s->adb_data_out_index & 1) {
return 0;
}
break;
case ADB_STATE_IDLE:
return 0;
}
assert(s->adb_data_out_index < sizeof(s->adb_data_out) - 1);
s->adb_data_out[s->adb_data_out_index++] = data;
qemu_irq_raise(s->adb_data_ready);
return 1;
}
static int adb_via_receive(MacVIAState *s, int state, uint8_t *data)
{
switch (state) {
case ADB_STATE_NEW:
return 0;
case ADB_STATE_EVEN:
if (s->adb_data_in_size <= 0) {
qemu_irq_raise(s->adb_data_ready);
return 0;
}
if (s->adb_data_in_index >= s->adb_data_in_size) {
*data = 0;
qemu_irq_raise(s->adb_data_ready);
return 1;
}
if ((s->adb_data_in_index & 1) == 0) {
return 0;
}
break;
case ADB_STATE_ODD:
if (s->adb_data_in_size <= 0) {
qemu_irq_raise(s->adb_data_ready);
return 0;
}
if (s->adb_data_in_index >= s->adb_data_in_size) {
*data = 0;
qemu_irq_raise(s->adb_data_ready);
return 1;
}
if (s->adb_data_in_index & 1) {
return 0;
}
break;
case ADB_STATE_IDLE:
if (s->adb_data_out_index == 0) {
return 0;
}
s->adb_data_in_size = adb_request(&s->adb_bus, s->adb_data_in,
s->adb_data_out,
s->adb_data_out_index);
s->adb_data_out_index = 0;
s->adb_data_in_index = 0;
if (s->adb_data_in_size < 0) {
*data = 0xff;
qemu_irq_raise(s->adb_data_ready);
return -1;
}
if (s->adb_data_in_size == 0) {
return 0;
}
break;
}
assert(s->adb_data_in_index < sizeof(s->adb_data_in) - 1);
*data = s->adb_data_in[s->adb_data_in_index++];
qemu_irq_raise(s->adb_data_ready);
if (*data == 0xff || *data == 0) {
return 0;
}
return 1;
}
static void via1_adb_update(MacVIAState *m)
{
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
MOS6522State *s = MOS6522(v1s);
int state;
int ret;
state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
if (s->acr & VIA1ACR_vShiftOut) {
/* output mode */
ret = adb_via_send(m, state, s->sr);
if (ret > 0) {
s->b &= ~VIA1B_vADBInt;
} else {
s->b |= VIA1B_vADBInt;
}
} else {
/* input mode */
ret = adb_via_receive(m, state, &s->sr);
if (ret > 0 && s->sr != 0xff) {
s->b &= ~VIA1B_vADBInt;
} else {
s->b |= VIA1B_vADBInt;
}
}
}
static void via_adb_poll(void *opaque)
{
MacVIAState *m = opaque;
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
MOS6522State *s = MOS6522(v1s);
int state;
if (s->b & VIA1B_vADBInt) {
state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
if (adb_via_poll(m, state, &s->sr)) {
s->b &= ~VIA1B_vADBInt;
}
}
timer_mod(m->adb_poll_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
(NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ));
}
static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
{
MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
MOS6522State *ms = MOS6522(s);
int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
/*
* If IRQs are disabled, timers are disabled, but we need to update
* VIA1_IRQ_VBLANK and VIA1_IRQ_ONE_SECOND bits in the IFR
*/
if (now >= s->next_VBL) {
ms->ifr |= VIA1_IRQ_VBLANK;
via1_VBL_update(s);
}
if (now >= s->next_second) {
ms->ifr |= VIA1_IRQ_ONE_SECOND;
via1_one_second_update(s);
}
addr = (addr >> 9) & 0xf;
return mos6522_read(ms, addr, size);
}
static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(opaque);
MOS6522State *ms = MOS6522(v1s);
addr = (addr >> 9) & 0xf;
mos6522_write(ms, addr, val, size);
via1_one_second_update(v1s);
via1_VBL_update(v1s);
}
static const MemoryRegionOps mos6522_q800_via1_ops = {
.read = mos6522_q800_via1_read,
.write = mos6522_q800_via1_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 1,
},
};
static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned size)
{
MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
MOS6522State *ms = MOS6522(s);
addr = (addr >> 9) & 0xf;
return mos6522_read(ms, addr, size);
}
static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
MOS6522State *ms = MOS6522(s);
addr = (addr >> 9) & 0xf;
mos6522_write(ms, addr, val, size);
}
static const MemoryRegionOps mos6522_q800_via2_ops = {
.read = mos6522_q800_via2_read,
.write = mos6522_q800_via2_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 1,
},
};
static void mac_via_reset(DeviceState *dev)
{
MacVIAState *m = MAC_VIA(dev);
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
timer_mod(m->adb_poll_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
(NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ));
timer_del(v1s->VBL_timer);
v1s->next_VBL = 0;
timer_del(v1s->one_second_timer);
v1s->next_second = 0;
}
static void mac_via_realize(DeviceState *dev, Error **errp)
{
MacVIAState *m = MAC_VIA(dev);
MOS6522State *ms;
struct tm tm;
/* Init VIAs 1 and 2 */
sysbus_init_child_obj(OBJECT(dev), "via1", &m->mos6522_via1,
sizeof(m->mos6522_via1), TYPE_MOS6522_Q800_VIA1);
sysbus_init_child_obj(OBJECT(dev), "via2", &m->mos6522_via2,
sizeof(m->mos6522_via2), TYPE_MOS6522_Q800_VIA2);
/* Pass through mos6522 output IRQs */
ms = MOS6522(&m->mos6522_via1);
object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms),
SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort);
ms = MOS6522(&m->mos6522_via2);
object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms),
SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort);
/* Pass through mos6522 input IRQs */
qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq");
qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq");
/* VIA 1 */
m->mos6522_via1.one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
via1_one_second,
&m->mos6522_via1);
m->mos6522_via1.VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL,
&m->mos6522_via1);
qemu_get_timedate(&tm, 0);
m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
m->adb_poll_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via_adb_poll, m);
m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq",
VIA1_IRQ_ADB_READY_BIT);
}
static void mac_via_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
MacVIAState *m = MAC_VIA(obj);
/* MMIO */
memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE);
sysbus_init_mmio(sbd, &m->mmio);
memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops,
&m->mos6522_via1, "via1", VIA_SIZE);
memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem);
memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops,
&m->mos6522_via2, "via2", VIA_SIZE);
memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem);
/* ADB */
qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus),
TYPE_ADB_BUS, DEVICE(obj), "adb.0");
}
static const VMStateDescription vmstate_mac_via = {
.name = "mac-via",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
/* VIAs */
VMSTATE_STRUCT(mos6522_via1.parent_obj, MacVIAState, 0, vmstate_mos6522,
MOS6522State),
VMSTATE_UINT8(mos6522_via1.last_b, MacVIAState),
VMSTATE_BUFFER(mos6522_via1.PRAM, MacVIAState),
VMSTATE_TIMER_PTR(mos6522_via1.one_second_timer, MacVIAState),
VMSTATE_INT64(mos6522_via1.next_second, MacVIAState),
VMSTATE_TIMER_PTR(mos6522_via1.VBL_timer, MacVIAState),
VMSTATE_INT64(mos6522_via1.next_VBL, MacVIAState),
VMSTATE_STRUCT(mos6522_via2.parent_obj, MacVIAState, 0, vmstate_mos6522,
MOS6522State),
/* RTC */
VMSTATE_UINT32(tick_offset, MacVIAState),
VMSTATE_UINT8(data_out, MacVIAState),
VMSTATE_INT32(data_out_cnt, MacVIAState),
VMSTATE_UINT8(data_in, MacVIAState),
VMSTATE_UINT8(data_in_cnt, MacVIAState),
VMSTATE_UINT8(cmd, MacVIAState),
VMSTATE_INT32(wprotect, MacVIAState),
VMSTATE_INT32(alt, MacVIAState),
/* ADB */
VMSTATE_TIMER_PTR(adb_poll_timer, MacVIAState),
VMSTATE_INT32(adb_data_in_size, MacVIAState),
VMSTATE_INT32(adb_data_in_index, MacVIAState),
VMSTATE_INT32(adb_data_out_index, MacVIAState),
VMSTATE_BUFFER(adb_data_in, MacVIAState),
VMSTATE_BUFFER(adb_data_out, MacVIAState),
VMSTATE_END_OF_LIST()
}
};
static void mac_via_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = mac_via_realize;
dc->reset = mac_via_reset;
dc->vmsd = &vmstate_mac_via;
}
static TypeInfo mac_via_info = {
.name = TYPE_MAC_VIA,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(MacVIAState),
.instance_init = mac_via_init,
.class_init = mac_via_class_init,
};
/* VIA 1 */
static void mos6522_q800_via1_portB_write(MOS6522State *s)
{
MOS6522Q800VIA1State *v1s = container_of(s, MOS6522Q800VIA1State,
parent_obj);
MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1);
via1_rtc_update(m);
via1_adb_update(m);
v1s->last_b = s->b;
}
static void mos6522_q800_via1_reset(DeviceState *dev)
{
MOS6522State *ms = MOS6522(dev);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
mdc->parent_reset(dev);
ms->timers[0].frequency = VIA_TIMER_FREQ;
ms->timers[1].frequency = VIA_TIMER_FREQ;
ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb;
}
static void mos6522_q800_via1_init(Object *obj)
{
qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq",
VIA1_IRQ_NB);
}
static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
dc->reset = mos6522_q800_via1_reset;
mdc->portB_write = mos6522_q800_via1_portB_write;
}
static const TypeInfo mos6522_q800_via1_type_info = {
.name = TYPE_MOS6522_Q800_VIA1,
.parent = TYPE_MOS6522,
.instance_size = sizeof(MOS6522Q800VIA1State),
.instance_init = mos6522_q800_via1_init,
.class_init = mos6522_q800_via1_class_init,
};
/* VIA 2 */
static void mos6522_q800_via2_portB_write(MOS6522State *s)
{
if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) {
/* shutdown */
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
}
static void mos6522_q800_via2_reset(DeviceState *dev)
{
MOS6522State *ms = MOS6522(dev);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
mdc->parent_reset(dev);
ms->timers[0].frequency = VIA_TIMER_FREQ;
ms->timers[1].frequency = VIA_TIMER_FREQ;
ms->dirb = 0;
ms->b = 0;
}
static void mos6522_q800_via2_init(Object *obj)
{
qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq",
VIA2_IRQ_NB);
}
static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
dc->reset = mos6522_q800_via2_reset;
mdc->portB_write = mos6522_q800_via2_portB_write;
}
static const TypeInfo mos6522_q800_via2_type_info = {
.name = TYPE_MOS6522_Q800_VIA2,
.parent = TYPE_MOS6522,
.instance_size = sizeof(MOS6522Q800VIA2State),
.instance_init = mos6522_q800_via2_init,
.class_init = mos6522_q800_via2_class_init,
};
static void mac_via_register_types(void)
{
type_register_static(&mos6522_q800_via1_type_info);
type_register_static(&mos6522_q800_via2_type_info);
type_register_static(&mac_via_info);
}
type_init(mac_via_register_types);