qemu-e2k/hw/misc
Peter Maydell 37e571f1e0 hw/misc/tz-ppc: Support having unused ports in the middle of the range
The Peripheral Protection Controller's handling of unused ports
is that if there is nothing connected to the port's downstream
then it does not create the sysbus MMIO region for the upstream
end of the port. This results in odd behaviour when there is
an unused port in the middle of the range: since sysbus MMIO
regions are implicitly consecutively allocated, any used ports
above the unused ones end up with sysbus MMIO region numbers
that don't match the port number.

Avoid this numbering mismatch by creating dummy MMIO regions
for the unused ports. This doesn't change anything for our
existing boards, which don't have any gaps in the middle of
the port ranges they use; but it will be needed for the Musca
board.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-21 18:17:46 +00:00
..
macio cuda: decrease time delay before raising VIA SR interrupt and remove fast path 2019-02-17 21:54:02 +11:00
a9scu.c
applesmc.c Convert single line fprintf(.../n) to warn_report() 2017-09-19 14:09:34 +02:00
arm11scu.c
arm_integrator_debug.c hw: Do not include "exec/address-spaces.h" if it is not necessary 2018-06-01 14:15:10 +02:00
arm_l2x0.c
arm_sysctl.c
armsse-cpuid.c hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register block 2019-02-01 14:55:43 +00:00
aspeed_scu.c aspeed: Implement write-1-{set, clear} for AST2500 strapping 2018-07-16 17:18:41 +01:00
aspeed_sdmc.c aspeed: add a max_ram_size property to the memory controller 2018-08-16 14:29:58 +01:00
auxbus.c hw/display/xlnx_dp: Move problematic code from instance_init to realize 2018-07-17 13:12:49 +01:00
bcm2835_mbox.c
bcm2835_property.c hw/display/bcm2835_fb: Validate config settings 2018-08-24 13:17:50 +01:00
bcm2835_rng.c
cbus.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
debugexit.c hw: debugexit: add read callback 2018-10-02 19:09:03 +02:00
eccmemctl.c
edu.c hw: edu: set category of the edu device 2019-01-30 10:16:00 +01:00
exynos4210_clk.c
exynos4210_pmu.c hw/misc/exynos4210_pmu: Add support for system poweroff 2017-06-13 14:56:58 +01:00
exynos4210_rng.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
imx2_wdt.c i.MX: Add code to emulate i.MX2 watchdog IP block 2018-02-09 10:40:29 +00:00
imx6_ccm.c Remove empty statements 2017-12-18 17:07:02 +03:00
imx6_src.c
imx6ul_ccm.c i.MX6UL: Add i.MX6UL specific CCM device 2018-08-16 14:05:28 +01:00
imx7_ccm.c i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocks 2018-02-09 10:40:29 +00:00
imx7_gpr.c i.MX: Add implementation of i.MX7 GPR IP block 2018-02-09 10:40:30 +00:00
imx7_snvs.c i.MX: Add code to emulate i.MX7 SNVS IP-block 2018-02-09 10:40:30 +00:00
imx25_ccm.c
imx31_ccm.c
imx_ccm.c
iotkit-secctl.c hw/misc/iotkit-secctl: Support 4 internal MPCs 2019-02-01 14:55:42 +00:00
iotkit-sysctl.c hw/misc/iotkit-sysctl: Implement IoTKit system control element 2018-08-24 13:17:42 +01:00
iotkit-sysinfo.c iotkit-sysinfo: Make SYS_VERSION and SYS_CONFIG configurable 2019-02-01 14:55:42 +00:00
ivshmem.c hw/misc/ivshmem: Remove deprecated "ivshmem" legacy device 2019-01-14 19:31:04 -05:00
Makefile.objs hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register block 2019-02-01 14:55:43 +00:00
max111x.c avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
milkymist-hpdmc.c milkymist-hpdmc: Convert sysbus init function to realize function 2018-12-13 13:47:59 +00:00
milkymist-pfpu.c milkymist-pfpu: Convert sysbus init function to realize function 2018-12-13 13:47:59 +00:00
mips_cmgcr.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
mips_cpc.c hw/mips_cpc: kick a VP when putting it into Run statewq 2019-02-14 17:47:28 +01:00
mips_itu.c target/mips: Update ITU to handle bus errors 2019-01-18 16:53:28 +01:00
mos6522.c mos6522: expose mos6522_update_irq() through MOS6522DeviceClass 2018-06-16 16:32:33 +10:00
mps2-fpgaio.c hw/misc/mps2-fpgaio: Implement PSCNTR and COUNTER 2018-08-24 13:17:40 +01:00
mps2-scc.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
msf2-sysreg.c msf2: Microsemi Smartfusion2 System Register block 2017-09-21 16:36:56 +01:00
mst_fpga.c
nrf51_rng.c hw/misc/nrf51_rng: Add NRF51 random number generator peripheral 2019-01-07 15:23:47 +00:00
omap_clk.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
omap_gpmc.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
omap_l4.c avoid TABs in files that only contain a few 2019-01-11 15:46:56 +01:00
omap_sdrc.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
omap_tap.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
pc-testdev.c pc-testdev: use HTTPS git URL 2018-11-12 11:26:02 +00:00
pca9552.c misc: add pca9552 LED blinker model 2018-06-08 13:15:32 +01:00
pci-testdev.c pci-testdev: add optional memory bar 2018-11-05 13:24:02 -05:00
puv3_pm.c puv3_pm.c: Convert sysbus init function to realize function 2018-12-13 13:48:00 +00:00
pvpanic.c check: Only test pvpanic when it is compiled in 2018-08-21 19:52:16 +02:00
sga.c hw/misc/sga: Use the correct ISA include 2018-06-01 14:15:10 +02:00
slavio_misc.c
stm32f2xx_syscfg.c maint: Fix macros with broken 'do/while(0); ' usage 2018-01-16 14:54:52 +01:00
tmp105.c misc: Avoid UTF-8 in error messages 2018-12-11 18:28:46 +01:00
tmp105.h
tmp421.c misc: Avoid UTF-8 in error messages 2018-12-11 18:28:46 +01:00
trace-events hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register block 2019-02-01 14:55:43 +00:00
tz-mpc.c hw/misc/tz-mpc: Fix value of BLK_MAX register 2019-01-07 15:23:48 +00:00
tz-msc.c hw/misc/tz-msc: Model TrustZone Master Security Controller 2018-08-24 13:17:43 +01:00
tz-ppc.c hw/misc/tz-ppc: Support having unused ports in the middle of the range 2019-02-21 18:17:46 +00:00
unimp.c hw/misc/unimp: Move struct to header file 2018-03-02 11:03:45 +00:00
vmcoreinfo.c fw_cfg: import & use linux/qemu_fw_cfg.h 2018-08-23 18:46:25 +02:00
zynq_slcr.c maint: Fix macros with broken 'do/while(0); ' usage 2018-01-16 14:54:52 +01:00
zynq-xadc.c