qemu-e2k/hw/ide/piix.c
Igor V. Kovalenko 90228ee395 workaround for cmd646 bmdma register access while no dma is active
This is a workaround only, and is a partial revert
of a few changes to BMDMAState which removed pci_dev
field on the way.

- cmd646 pci_from_bm() expects bm->unit value to
correspond with bm data being passed to callback
as opaque pointer. This breaks when write to dma
control register of second channel happens when no
dma operation is in progress, so bm->unit is zero
for second channel, and pci_from_bm() returns garbage
pointer. Crash happens shortly after that while
dereferencing that pointer.

v0->v1: cleaned up dead code from pci_from_bm.

Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13 19:03:31 +00:00

200 lines
5.9 KiB
C

/*
* QEMU IDE Emulation: PCI PIIX3/4 support.
*
* Copyright (c) 2003 Fabrice Bellard
* Copyright (c) 2006 Openedhand Ltd.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <hw/hw.h>
#include <hw/pc.h>
#include <hw/pci.h>
#include <hw/isa.h>
#include "block.h"
#include "block_int.h"
#include "sysemu.h"
#include "dma.h"
#include <hw/ide/pci.h>
static uint32_t bmdma_readb(void *opaque, uint32_t addr)
{
BMDMAState *bm = opaque;
uint32_t val;
switch(addr & 3) {
case 0:
val = bm->cmd;
break;
case 2:
val = bm->status;
break;
default:
val = 0xff;
break;
}
#ifdef DEBUG_IDE
printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
#endif
return val;
}
static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
{
BMDMAState *bm = opaque;
#ifdef DEBUG_IDE
printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
#endif
switch(addr & 3) {
case 2:
bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
break;
}
}
static void bmdma_map(PCIDevice *pci_dev, int region_num,
pcibus_t addr, pcibus_t size, int type)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
int i;
for(i = 0;i < 2; i++) {
BMDMAState *bm = &d->bmdma[i];
d->bus[i].bmdma = bm;
bm->bus = d->bus+i;
bm->pci_dev = d;
qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
register_ioport_read(addr, 4, 1, bmdma_readb, bm);
register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm);
register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm);
register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm);
register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm);
register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm);
register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm);
addr += 8;
}
}
static void piix3_reset(void *opaque)
{
PCIIDEState *d = opaque;
uint8_t *pci_conf = d->dev.config;
int i;
for (i = 0; i < 2; i++) {
ide_bus_reset(&d->bus[i]);
ide_dma_reset(&d->bmdma[i]);
}
pci_conf[0x04] = 0x00;
pci_conf[0x05] = 0x00;
pci_conf[0x06] = 0x80; /* FBC */
pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
}
static int pci_piix_ide_initfn(PCIIDEState *d)
{
uint8_t *pci_conf = d->dev.config;
pci_conf[0x09] = 0x80; // legacy ATA mode
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
qemu_register_reset(piix3_reset, d);
pci_register_bar(&d->dev, 4, 0x10, PCI_BASE_ADDRESS_SPACE_IO, bmdma_map);
vmstate_register(0, &vmstate_ide_pci, d);
ide_bus_new(&d->bus[0], &d->dev.qdev);
ide_bus_new(&d->bus[1], &d->dev.qdev);
ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
ide_init_ioport(&d->bus[1], 0x170, 0x376);
ide_init2(&d->bus[0], NULL, NULL, isa_reserve_irq(14));
ide_init2(&d->bus[1], NULL, NULL, isa_reserve_irq(15));
return 0;
}
static int pci_piix3_ide_initfn(PCIDevice *dev)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371SB_1);
return pci_piix_ide_initfn(d);
}
static int pci_piix4_ide_initfn(PCIDevice *dev)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371AB);
return pci_piix_ide_initfn(d);
}
/* hd_table must contain 4 block drivers */
/* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "piix3-ide");
pci_ide_create_devs(dev, hd_table);
}
/* hd_table must contain 4 block drivers */
/* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "piix4-ide");
pci_ide_create_devs(dev, hd_table);
}
static PCIDeviceInfo piix_ide_info[] = {
{
.qdev.name = "piix3-ide",
.qdev.size = sizeof(PCIIDEState),
.qdev.no_user = 1,
.init = pci_piix3_ide_initfn,
},{
.qdev.name = "piix4-ide",
.qdev.size = sizeof(PCIIDEState),
.qdev.no_user = 1,
.init = pci_piix4_ide_initfn,
},{
/* end of list */
}
};
static void piix_ide_register(void)
{
pci_qdev_register_many(piix_ide_info);
}
device_init(piix_ide_register);