Guenter Roeck 9e946eaba8 z2: Make providing flash images non-mandatory ... Up to now, the z2 machine only boots if a flash image is provided. This is not really necessary; the machine can boot from initrd or from SD without it. At the same time, having to provide dummy flash images is a nuisance and does not add any real value. Make it optional. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200217210903.18602-1-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>		2020-02-21 16:07:00 +00:00
..
allwinner-a10.c	hw/arm/allwinner-a10: Remove local qemu_irq variables	2020-01-17 14:09:30 +00:00
armsse.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
armv7m.c	hw/core/loader: Let load_elf() populate a field with CPU-specific flags	2020-01-29 19:28:52 +01:00
aspeed_ast2600.c	hw/arm: ast2600: Wire up EHCI controllers	2020-02-13 14:14:55 +00:00
aspeed_soc.c	hw/arm: ast2400/ast2500: Wire up EHCI controllers	2020-02-13 14:14:55 +00:00
aspeed.c	hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0	2020-01-30 16:02:02 +00:00
bcm2835_peripherals.c
bcm2836.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
boot.c	hw/core/loader: Let load_elf() populate a field with CPU-specific flags	2020-01-29 19:28:52 +01:00
collie.c
cubieboard.c
digic_boards.c
digic.c
exynos4_boards.c
exynos4210.c	hw/arm/exynos4210: Connect serial port DMA busy signals with pl330	2020-01-23 16:34:15 +00:00
fsl-imx6.c	i.MX: Add support for WDT on i.MX6	2020-02-13 14:14:52 +00:00
fsl-imx6ul.c
fsl-imx7.c
fsl-imx25.c	i.MX: add an emulation for RNGC	2020-01-17 14:27:16 +00:00
fsl-imx31.c
gumstix.c
highbank.c
imx25_pdk.c
integratorcp.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
Kconfig	hw/misc: Add the STM32F4xx EXTI device	2020-01-17 14:09:29 +00:00
kzm.c
mainstone.c	mainstone: Make providing flash images non-mandatory	2020-02-21 16:07:00 +00:00
Makefile.objs	hw/arm: Add the Netduino Plus 2	2020-01-17 14:09:29 +00:00
mcimx6ul-evk.c
mcimx7d-sabre.c
microbit.c
mps2-tz.c
mps2.c
msf2-soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
msf2-som.c
musca.c
musicpal.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
netduino2.c
netduinoplus2.c	hw/arm: Add the Netduino Plus 2	2020-01-17 14:09:29 +00:00
nrf51_soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
nseries.c	hw/arm/nseries: Replace the bluetooth chardev with a "null" chardev	2019-12-16 17:24:07 +01:00
omap1.c	omap-gpio: remove PROP_PTR	2020-01-07 17:24:29 +04:00
omap2.c	omap-gpio: remove PROP_PTR	2020-01-07 17:24:29 +04:00
omap_sx1.c
palm.c
pxa2xx_gpio.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
pxa2xx_pic.c
pxa2xx.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
raspi.c	hw/arm/raspi: Extract the cores count from the board revision	2020-02-13 14:30:51 +00:00
realview.c
sabrelite.c
sbsa-ref.c	numa: properly check if numa is supported	2019-12-19 14:57:14 -03:00
smmu-common.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
smmu-internal.h
smmuv3-internal.h	hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro	2019-12-20 14:03:00 +00:00
smmuv3.c	hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word position	2019-12-20 14:03:00 +00:00
spitz.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
stellaris.c	stellaris: delay timer_new to avoid memleaks	2020-02-07 14:04:28 +00:00
stm32f205_soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
stm32f405_soc.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
strongarm.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
strongarm.h
sysbus-fdt.c
tosa.c
trace-events
versatilepb.c
vexpress.c
virt-acpi-build.c	arm/acpi: simplify the description of PCI _CRS	2020-02-13 14:14:53 +00:00
virt.c	target/arm/cpu: Add the kvm-no-adjvtime CPU property	2020-01-30 16:02:06 +00:00
xilinx_zynq.c
xlnx-versal-virt.c	hw/arm/xlnx-versal: Remove superfluous semicolon	2020-02-18 20:20:49 +01:00
xlnx-versal.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
xlnx-zcu102.c
xlnx-zynqmp.c	qdev: set properties with device_class_set_props()	2020-01-24 20:59:15 +01:00
z2.c	z2: Make providing flash images non-mandatory	2020-02-21 16:07:00 +00:00