qemu-e2k/hw/acpi_piix4.c

574 lines
16 KiB
C

/*
* ACPI implementation
*
* Copyright (c) 2006 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2 as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>
*/
#include "hw.h"
#include "pc.h"
#include "apm.h"
#include "pm_smbus.h"
#include "pci.h"
#include "acpi.h"
#include "sysemu.h"
#include "range.h"
#include "ioport.h"
//#define DEBUG
#ifdef DEBUG
# define PIIX4_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
#else
# define PIIX4_DPRINTF(format, ...) do { } while (0)
#endif
#define ACPI_DBG_IO_ADDR 0xb044
#define GPE_BASE 0xafe0
#define GPE_LEN 4
#define PCI_BASE 0xae00
#define PCI_EJ_BASE 0xae08
#define PCI_RMV_BASE 0xae0c
#define PIIX4_PCI_HOTPLUG_STATUS 2
struct pci_status {
uint32_t up;
uint32_t down;
};
typedef struct PIIX4PMState {
PCIDevice dev;
IORange ioport;
ACPIPM1EVT pm1a;
ACPIPM1CNT pm1_cnt;
APMState apm;
ACPIPMTimer tmr;
PMSMBus smb;
uint32_t smb_io_base;
qemu_irq irq;
qemu_irq smi_irq;
int kvm_enabled;
Notifier machine_ready;
/* for pci hotplug */
ACPIGPE gpe;
struct pci_status pci0_status;
uint32_t pci0_hotplug_enable;
} PIIX4PMState;
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
static void pm_update_sci(PIIX4PMState *s)
{
int sci_level, pmsts;
pmsts = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
sci_level = (((pmsts & s->pm1a.en) &
(ACPI_BITMASK_RT_CLOCK_ENABLE |
ACPI_BITMASK_POWER_BUTTON_ENABLE |
ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
(((s->gpe.sts[0] & s->gpe.en[0]) & PIIX4_PCI_HOTPLUG_STATUS) != 0);
qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
acpi_pm_tmr_update(&s->tmr, (s->pm1a.en & ACPI_BITMASK_TIMER_ENABLE) &&
!(pmsts & ACPI_BITMASK_TIMER_STATUS));
}
static void pm_tmr_timer(ACPIPMTimer *tmr)
{
PIIX4PMState *s = container_of(tmr, PIIX4PMState, tmr);
pm_update_sci(s);
}
static void pm_ioport_write(IORange *ioport, uint64_t addr, unsigned width,
uint64_t val)
{
PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
if (width != 2) {
PIIX4_DPRINTF("PM write port=0x%04x width=%d val=0x%08x\n",
(unsigned)addr, width, (unsigned)val);
}
switch(addr) {
case 0x00:
acpi_pm1_evt_write_sts(&s->pm1a, &s->tmr, val);
pm_update_sci(s);
break;
case 0x02:
s->pm1a.en = val;
pm_update_sci(s);
break;
case 0x04:
acpi_pm1_cnt_write(&s->pm1a, &s->pm1_cnt, val);
break;
default:
break;
}
PIIX4_DPRINTF("PM writew port=0x%04x val=0x%04x\n", (unsigned int)addr,
(unsigned int)val);
}
static void pm_ioport_read(IORange *ioport, uint64_t addr, unsigned width,
uint64_t *data)
{
PIIX4PMState *s = container_of(ioport, PIIX4PMState, ioport);
uint32_t val;
switch(addr) {
case 0x00:
val = acpi_pm1_evt_get_sts(&s->pm1a, s->tmr.overflow_time);
break;
case 0x02:
val = s->pm1a.en;
break;
case 0x04:
val = s->pm1_cnt.cnt;
break;
case 0x08:
val = acpi_pm_tmr_get(&s->tmr);
break;
default:
val = 0;
break;
}
PIIX4_DPRINTF("PM readw port=0x%04x val=0x%04x\n", (unsigned int)addr, val);
*data = val;
}
static const IORangeOps pm_iorange_ops = {
.read = pm_ioport_read,
.write = pm_ioport_write,
};
static void apm_ctrl_changed(uint32_t val, void *arg)
{
PIIX4PMState *s = arg;
/* ACPI specs 3.0, 4.7.2.5 */
acpi_pm1_cnt_update(&s->pm1_cnt, val == ACPI_ENABLE, val == ACPI_DISABLE);
if (s->dev.config[0x5b] & (1 << 1)) {
if (s->smi_irq) {
qemu_irq_raise(s->smi_irq);
}
}
}
static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4_DPRINTF("ACPI: DBG: 0x%08x\n", val);
}
static void pm_io_space_update(PIIX4PMState *s)
{
uint32_t pm_io_base;
if (s->dev.config[0x80] & 1) {
pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
pm_io_base &= 0xffc0;
/* XXX: need to improve memory and ioport allocation */
PIIX4_DPRINTF("PM: mapping to 0x%x\n", pm_io_base);
iorange_init(&s->ioport, &pm_iorange_ops, pm_io_base, 64);
ioport_register(&s->ioport);
}
}
static void pm_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len)
{
pci_default_write_config(d, address, val, len);
if (range_covers_byte(address, len, 0x80))
pm_io_space_update((PIIX4PMState *)d);
}
static int vmstate_acpi_post_load(void *opaque, int version_id)
{
PIIX4PMState *s = opaque;
pm_io_space_update(s);
return 0;
}
#define VMSTATE_GPE_ARRAY(_field, _state) \
{ \
.name = (stringify(_field)), \
.version_id = 0, \
.num = GPE_LEN, \
.info = &vmstate_info_uint16, \
.size = sizeof(uint16_t), \
.flags = VMS_ARRAY | VMS_POINTER, \
.offset = vmstate_offset_pointer(_state, _field, uint8_t), \
}
static const VMStateDescription vmstate_gpe = {
.name = "gpe",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
VMSTATE_GPE_ARRAY(sts, ACPIGPE),
VMSTATE_GPE_ARRAY(en, ACPIGPE),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_pci_status = {
.name = "pci_status",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField []) {
VMSTATE_UINT32(up, struct pci_status),
VMSTATE_UINT32(down, struct pci_status),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_acpi = {
.name = "piix4_pm",
.version_id = 2,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.post_load = vmstate_acpi_post_load,
.fields = (VMStateField []) {
VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
VMSTATE_UINT16(pm1a.sts, PIIX4PMState),
VMSTATE_UINT16(pm1a.en, PIIX4PMState),
VMSTATE_UINT16(pm1_cnt.cnt, PIIX4PMState),
VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
VMSTATE_TIMER(tmr.timer, PIIX4PMState),
VMSTATE_INT64(tmr.overflow_time, PIIX4PMState),
VMSTATE_STRUCT(gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
struct pci_status),
VMSTATE_END_OF_LIST()
}
};
static void piix4_update_hotplug(PIIX4PMState *s)
{
PCIDevice *dev = &s->dev;
BusState *bus = qdev_get_parent_bus(&dev->qdev);
DeviceState *qdev, *next;
s->pci0_hotplug_enable = ~0;
QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
PCIDeviceInfo *info = container_of(qdev->info, PCIDeviceInfo, qdev);
PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, qdev);
int slot = PCI_SLOT(pdev->devfn);
if (info->no_hotplug) {
s->pci0_hotplug_enable &= ~(1 << slot);
}
}
}
static void piix4_reset(void *opaque)
{
PIIX4PMState *s = opaque;
uint8_t *pci_conf = s->dev.config;
pci_conf[0x58] = 0;
pci_conf[0x59] = 0;
pci_conf[0x5a] = 0;
pci_conf[0x5b] = 0;
if (s->kvm_enabled) {
/* Mark SMM as already inited (until KVM supports SMM). */
pci_conf[0x5B] = 0x02;
}
piix4_update_hotplug(s);
}
static void piix4_powerdown(void *opaque, int irq, int power_failing)
{
PIIX4PMState *s = opaque;
ACPIPM1EVT *pm1a = s? &s->pm1a: NULL;
ACPIPMTimer *tmr = s? &s->tmr: NULL;
acpi_pm1_evt_power_down(pm1a, tmr);
}
static void piix4_pm_machine_ready(Notifier *n, void *opaque)
{
PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready);
uint8_t *pci_conf;
pci_conf = s->dev.config;
pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10;
pci_conf[0x63] = 0x60;
pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) |
(isa_is_ioport_assigned(0x2f8) ? 0x90 : 0);
}
static int piix4_pm_initfn(PCIDevice *dev)
{
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
uint8_t *pci_conf;
pci_conf = s->dev.config;
pci_conf[0x06] = 0x80;
pci_conf[0x07] = 0x02;
pci_conf[0x09] = 0x00;
pci_conf[0x3d] = 0x01; // interrupt pin 1
pci_conf[0x40] = 0x01; /* PM io base read only bit */
/* APM */
apm_init(&s->apm, apm_ctrl_changed, s);
register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
if (s->kvm_enabled) {
/* Mark SMM as already inited to prevent SMM from running. KVM does not
* support SMM mode. */
pci_conf[0x5B] = 0x02;
}
/* XXX: which specification is used ? The i82731AB has different
mappings */
pci_conf[0x90] = s->smb_io_base | 1;
pci_conf[0x91] = s->smb_io_base >> 8;
pci_conf[0xd2] = 0x09;
register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
acpi_pm_tmr_init(&s->tmr, pm_tmr_timer);
acpi_gpe_init(&s->gpe, GPE_LEN);
qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
pm_smbus_init(&s->dev.qdev, &s->smb);
s->machine_ready.notify = piix4_pm_machine_ready;
qemu_add_machine_init_done_notifier(&s->machine_ready);
qemu_register_reset(piix4_reset, s);
piix4_acpi_system_hot_add_init(dev->bus, s);
return 0;
}
i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
int kvm_enabled)
{
PCIDevice *dev;
PIIX4PMState *s;
dev = pci_create(bus, devfn, "PIIX4_PM");
qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
s = DO_UPCAST(PIIX4PMState, dev, dev);
s->irq = sci_irq;
acpi_pm1_cnt_init(&s->pm1_cnt, cmos_s3);
s->smi_irq = smi_irq;
s->kvm_enabled = kvm_enabled;
qdev_init_nofail(&dev->qdev);
return s->smb.smbus;
}
static PCIDeviceInfo piix4_pm_info = {
.qdev.name = "PIIX4_PM",
.qdev.desc = "PM",
.qdev.size = sizeof(PIIX4PMState),
.qdev.vmsd = &vmstate_acpi,
.qdev.no_user = 1,
.no_hotplug = 1,
.init = piix4_pm_initfn,
.config_write = pm_write_config,
.vendor_id = PCI_VENDOR_ID_INTEL,
.device_id = PCI_DEVICE_ID_INTEL_82371AB_3,
.revision = 0x03,
.class_id = PCI_CLASS_BRIDGE_OTHER,
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
DEFINE_PROP_END_OF_LIST(),
}
};
static void piix4_pm_register(void)
{
pci_qdev_register(&piix4_pm_info);
}
device_init(piix4_pm_register);
static uint32_t gpe_readb(void *opaque, uint32_t addr)
{
PIIX4PMState *s = opaque;
uint32_t val = acpi_gpe_ioport_readb(&s->gpe, addr);
PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
return val;
}
static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
acpi_gpe_ioport_writeb(&s->gpe, addr, val);
pm_update_sci(s);
PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
}
static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
{
uint32_t val = 0;
struct pci_status *g = opaque;
switch (addr) {
case PCI_BASE:
val = g->up;
break;
case PCI_BASE + 4:
val = g->down;
break;
default:
break;
}
PIIX4_DPRINTF("pcihotplug read %x == %x\n", addr, val);
return val;
}
static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
{
struct pci_status *g = opaque;
switch (addr) {
case PCI_BASE:
g->up = val;
break;
case PCI_BASE + 4:
g->down = val;
break;
}
PIIX4_DPRINTF("pcihotplug write %x <== %d\n", addr, val);
}
static uint32_t pciej_read(void *opaque, uint32_t addr)
{
PIIX4_DPRINTF("pciej read %x\n", addr);
return 0;
}
static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
{
BusState *bus = opaque;
DeviceState *qdev, *next;
PCIDevice *dev;
PCIDeviceInfo *info;
int slot = ffs(val) - 1;
QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
dev = DO_UPCAST(PCIDevice, qdev, qdev);
info = container_of(qdev->info, PCIDeviceInfo, qdev);
if (PCI_SLOT(dev->devfn) == slot && !info->no_hotplug) {
qdev_free(qdev);
}
}
PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
}
static uint32_t pcirmv_read(void *opaque, uint32_t addr)
{
PIIX4PMState *s = opaque;
return s->pci0_hotplug_enable;
}
static void pcirmv_write(void *opaque, uint32_t addr, uint32_t val)
{
return;
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
PCIHotplugState state);
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
{
struct pci_status *pci0_status = &s->pci0_status;
register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
register_ioport_read(GPE_BASE, GPE_LEN, 1, gpe_readb, s);
acpi_gpe_blk(&s->gpe, GPE_BASE);
register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
}
static void enable_device(PIIX4PMState *s, int slot)
{
s->gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
s->pci0_status.up |= (1 << slot);
}
static void disable_device(PIIX4PMState *s, int slot)
{
s->gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
s->pci0_status.down |= (1 << slot);
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
PCIHotplugState state)
{
int slot = PCI_SLOT(dev->devfn);
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
DO_UPCAST(PCIDevice, qdev, qdev));
/* Don't send event when device is enabled during qemu machine creation:
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
if (state == PCI_COLDPLUG_ENABLED) {
return 0;
}
s->pci0_status.up = 0;
s->pci0_status.down = 0;
if (state == PCI_HOTPLUG_ENABLED) {
enable_device(s, slot);
} else {
disable_device(s, slot);
}
pm_update_sci(s);
return 0;
}