qemu-e2k/hw/intc/ppc-uic.c
Peter Maydell 37dc4b5f7c hw/intc/ppc-uic: Make default dcr-base 0xc0, not 0x30
In commit 34d0831f38 the ppc-uic device was added, with a dcr-base
property. The intention was that the default value of dcr-base should be
the one that most of our boards need, so that in the common case they
don't need to specify a property value.

All QEMU boards with a UIC use a dcr-base of 0xc0, with the exception of
sam460ex which has four UICs and so puts them at 0xc0, 0xd0, 0xe0, 0xf0.
So 0xc0 is the obvious right choice for the default dcr-base.

The board code conversions in commits 0270d74ef8 (bamboo) and
c5ac9dc64f (virtex_ml507) assumed that default was 0xc0. Unfortunately
the actual default in 34d0831f38 was 0x30, by mistake, so the
bamboo and virtex_ml507 boards were broken as they were converted
away from ppcuic_init() (which always specifies the dcr_base property
value explicitly).

Set the default dcr-base to 0xc0 as was intended, fixing bamboo and
virtex_ml507.

Fixes: 34d0831f38
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210111213007.7381-1-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-01-19 10:20:29 +11:00

322 lines
8.6 KiB
C

/*
* "Universal" Interrupt Controller for PowerPPC 4xx embedded processors
*
* Copyright (c) 2007 Jocelyn Mayer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "include/hw/intc/ppc-uic.h"
#include "hw/irq.h"
#include "cpu.h"
#include "hw/ppc/ppc.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
enum {
DCR_UICSR = 0x000,
DCR_UICSRS = 0x001,
DCR_UICER = 0x002,
DCR_UICCR = 0x003,
DCR_UICPR = 0x004,
DCR_UICTR = 0x005,
DCR_UICMSR = 0x006,
DCR_UICVR = 0x007,
DCR_UICVCR = 0x008,
DCR_UICMAX = 0x009,
};
/*#define DEBUG_UIC*/
#ifdef DEBUG_UIC
# define LOG_UIC(...) qemu_log_mask(CPU_LOG_INT, ## __VA_ARGS__)
#else
# define LOG_UIC(...) do { } while (0)
#endif
static void ppcuic_trigger_irq(PPCUIC *uic)
{
uint32_t ir, cr;
int start, end, inc, i;
/* Trigger interrupt if any is pending */
ir = uic->uicsr & uic->uicer & (~uic->uiccr);
cr = uic->uicsr & uic->uicer & uic->uiccr;
LOG_UIC("%s: uicsr %08" PRIx32 " uicer %08" PRIx32
" uiccr %08" PRIx32 "\n"
" %08" PRIx32 " ir %08" PRIx32 " cr %08" PRIx32 "\n",
__func__, uic->uicsr, uic->uicer, uic->uiccr,
uic->uicsr & uic->uicer, ir, cr);
if (ir != 0x0000000) {
LOG_UIC("Raise UIC interrupt\n");
qemu_irq_raise(uic->output_int);
} else {
LOG_UIC("Lower UIC interrupt\n");
qemu_irq_lower(uic->output_int);
}
/* Trigger critical interrupt if any is pending and update vector */
if (cr != 0x0000000) {
qemu_irq_raise(uic->output_cint);
if (uic->use_vectors) {
/* Compute critical IRQ vector */
if (uic->uicvcr & 1) {
start = 31;
end = 0;
inc = -1;
} else {
start = 0;
end = 31;
inc = 1;
}
uic->uicvr = uic->uicvcr & 0xFFFFFFFC;
for (i = start; i <= end; i += inc) {
if (cr & (1 << i)) {
uic->uicvr += (i - start) * 512 * inc;
break;
}
}
}
LOG_UIC("Raise UIC critical interrupt - "
"vector %08" PRIx32 "\n", uic->uicvr);
} else {
LOG_UIC("Lower UIC critical interrupt\n");
qemu_irq_lower(uic->output_cint);
uic->uicvr = 0x00000000;
}
}
static void ppcuic_set_irq(void *opaque, int irq_num, int level)
{
PPCUIC *uic;
uint32_t mask, sr;
uic = opaque;
mask = 1U << (31 - irq_num);
LOG_UIC("%s: irq %d level %d uicsr %08" PRIx32
" mask %08" PRIx32 " => %08" PRIx32 " %08" PRIx32 "\n",
__func__, irq_num, level,
uic->uicsr, mask, uic->uicsr & mask, level << irq_num);
if (irq_num < 0 || irq_num > 31) {
return;
}
sr = uic->uicsr;
/* Update status register */
if (uic->uictr & mask) {
/* Edge sensitive interrupt */
if (level == 1) {
uic->uicsr |= mask;
}
} else {
/* Level sensitive interrupt */
if (level == 1) {
uic->uicsr |= mask;
uic->level |= mask;
} else {
uic->uicsr &= ~mask;
uic->level &= ~mask;
}
}
LOG_UIC("%s: irq %d level %d sr %" PRIx32 " => "
"%08" PRIx32 "\n", __func__, irq_num, level, uic->uicsr, sr);
if (sr != uic->uicsr) {
ppcuic_trigger_irq(uic);
}
}
static uint32_t dcr_read_uic(void *opaque, int dcrn)
{
PPCUIC *uic;
uint32_t ret;
uic = opaque;
dcrn -= uic->dcr_base;
switch (dcrn) {
case DCR_UICSR:
case DCR_UICSRS:
ret = uic->uicsr;
break;
case DCR_UICER:
ret = uic->uicer;
break;
case DCR_UICCR:
ret = uic->uiccr;
break;
case DCR_UICPR:
ret = uic->uicpr;
break;
case DCR_UICTR:
ret = uic->uictr;
break;
case DCR_UICMSR:
ret = uic->uicsr & uic->uicer;
break;
case DCR_UICVR:
if (!uic->use_vectors) {
goto no_read;
}
ret = uic->uicvr;
break;
case DCR_UICVCR:
if (!uic->use_vectors) {
goto no_read;
}
ret = uic->uicvcr;
break;
default:
no_read:
ret = 0x00000000;
break;
}
return ret;
}
static void dcr_write_uic(void *opaque, int dcrn, uint32_t val)
{
PPCUIC *uic;
uic = opaque;
dcrn -= uic->dcr_base;
LOG_UIC("%s: dcr %d val 0x%x\n", __func__, dcrn, val);
switch (dcrn) {
case DCR_UICSR:
uic->uicsr &= ~val;
uic->uicsr |= uic->level;
ppcuic_trigger_irq(uic);
break;
case DCR_UICSRS:
uic->uicsr |= val;
ppcuic_trigger_irq(uic);
break;
case DCR_UICER:
uic->uicer = val;
ppcuic_trigger_irq(uic);
break;
case DCR_UICCR:
uic->uiccr = val;
ppcuic_trigger_irq(uic);
break;
case DCR_UICPR:
uic->uicpr = val;
break;
case DCR_UICTR:
uic->uictr = val;
ppcuic_trigger_irq(uic);
break;
case DCR_UICMSR:
break;
case DCR_UICVR:
break;
case DCR_UICVCR:
uic->uicvcr = val & 0xFFFFFFFD;
ppcuic_trigger_irq(uic);
break;
}
}
static void ppc_uic_reset(DeviceState *dev)
{
PPCUIC *uic = PPC_UIC(dev);
uic->uiccr = 0x00000000;
uic->uicer = 0x00000000;
uic->uicpr = 0x00000000;
uic->uicsr = 0x00000000;
uic->uictr = 0x00000000;
if (uic->use_vectors) {
uic->uicvcr = 0x00000000;
uic->uicvr = 0x0000000;
}
}
static void ppc_uic_realize(DeviceState *dev, Error **errp)
{
PPCUIC *uic = PPC_UIC(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
PowerPCCPU *cpu;
int i;
if (!uic->cpu) {
/* This is a programming error in the code using this device */
error_setg(errp, "ppc-uic 'cpu' link property was not set");
return;
}
cpu = POWERPC_CPU(uic->cpu);
for (i = 0; i < DCR_UICMAX; i++) {
ppc_dcr_register(&cpu->env, uic->dcr_base + i, uic,
&dcr_read_uic, &dcr_write_uic);
}
sysbus_init_irq(sbd, &uic->output_int);
sysbus_init_irq(sbd, &uic->output_cint);
qdev_init_gpio_in(dev, ppcuic_set_irq, UIC_MAX_IRQ);
}
static Property ppc_uic_properties[] = {
DEFINE_PROP_LINK("cpu", PPCUIC, cpu, TYPE_CPU, CPUState *),
DEFINE_PROP_UINT32("dcr-base", PPCUIC, dcr_base, 0xc0),
DEFINE_PROP_BOOL("use-vectors", PPCUIC, use_vectors, true),
DEFINE_PROP_END_OF_LIST()
};
static const VMStateDescription ppc_uic_vmstate = {
.name = "ppc-uic",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(level, PPCUIC),
VMSTATE_UINT32(uicsr, PPCUIC),
VMSTATE_UINT32(uicer, PPCUIC),
VMSTATE_UINT32(uiccr, PPCUIC),
VMSTATE_UINT32(uicpr, PPCUIC),
VMSTATE_UINT32(uictr, PPCUIC),
VMSTATE_UINT32(uicvcr, PPCUIC),
VMSTATE_UINT32(uicvr, PPCUIC),
VMSTATE_END_OF_LIST()
},
};
static void ppc_uic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = ppc_uic_reset;
dc->realize = ppc_uic_realize;
dc->vmsd = &ppc_uic_vmstate;
device_class_set_props(dc, ppc_uic_properties);
}
static const TypeInfo ppc_uic_info = {
.name = TYPE_PPC_UIC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PPCUIC),
.class_init = ppc_uic_class_init,
};
static void ppc_uic_register_types(void)
{
type_register_static(&ppc_uic_info);
}
type_init(ppc_uic_register_types);