OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
831f4d27b6
qemu-e2k/hw/i386/q35-acpi-dsdt.dsl
Michael S. Tsirkin 8dcf525abc acpi-build: append description for non-hotplug 
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.

I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:

Hardware -> PCI Cards:

  Card          Type                 Driver Installed  Slot
 *ethernet      Ethernet Controller  Yes               PCI Slot 2
  pci8086,2934  USB UHC              Yes               PCI Slot 29

  ethernet:
    Type:                 Ethernet Controller
    Driver Installed:     Yes
    MSI:                  No
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

After commit 99fd437dee, users get:

Hardware -> PCI Cards:

  This computer doesn't contain any PCI cards. If you installed PCI
  cards, make sure they're properly installed.

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.

To fix, append description for all occupied non hotpluggable PCI slots.

One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.

Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Also update generated dsdt and pcihp hex dump files.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09 21:09:30 +02:00

453 lines
16 KiB
Plaintext
Raw Blame History

/*
* Bochs/QEMU ACPI DSDT ASL definition
*
* Copyright (c) 2006 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2 as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Copyright (c) 2010 Isaku Yamahata
* yamahata at valinux co jp
* Based on acpi-dsdt.dsl, but heavily modified for q35 chipset.
*/
ACPI_EXTRACT_ALL_CODE Q35AcpiDsdtAmlCode
DefinitionBlock (
"q35-acpi-dsdt.aml",// Output Filename
"DSDT", // Signature
0x01, // DSDT Compliance Revision
"BXPC", // OEMID
"BXDSDT", // TABLE ID
0x2 // OEM Revision
)
{
#include "acpi-dsdt-dbug.dsl"
Scope(\_SB) {
OperationRegion(PCST, SystemIO, 0xae00, 0x0c)
OperationRegion(PCSB, SystemIO, 0xae0c, 0x01)
Field(PCSB, AnyAcc, NoLock, WriteAsZeros) {
PCIB, 8,
}
}
/****************************************************************
* PCI Bus definition
****************************************************************/
#define BOARD_SPECIFIC_PCI_RESOURSES \
WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, \
0x0000, \
0x0000, \
0x0CD7, \
0x0000, \
0x0CD8, \
,, , TypeStatic) \
/* 0xcd8-0xcf7 hole for CPU hotplug, hw/acpi/ich9.c:ICH9_PROC_BASE */ \
WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, \
0x0000, \
0x0D00, \
0xFFFF, \
0x0000, \
0xF300, \
,, , TypeStatic)
Scope(\_SB) {
Device(PCI0) {
Name(_HID, EisaId("PNP0A08"))
Name(_CID, EisaId("PNP0A03"))
Name(_ADR, 0x00)
Name(_UID, 1)
External(ISA, DeviceObj)
// _OSC: based on sample of ACPI3.0b spec
Name(SUPP, 0) // PCI _OSC Support Field value
Name(CTRL, 0) // PCI _OSC Control Field value
Method(_OSC, 4) {
// Create DWORD-addressable fields from the Capabilities Buffer
CreateDWordField(Arg3, 0, CDW1)
// Check for proper UUID
If (LEqual(Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
// Create DWORD-addressable fields from the Capabilities Buffer
CreateDWordField(Arg3, 4, CDW2)
CreateDWordField(Arg3, 8, CDW3)
// Save Capabilities DWORD2 & 3
Store(CDW2, SUPP)
Store(CDW3, CTRL)
// Always allow native PME, AER (no dependencies)
// Never allow SHPC (no SHPC controller in this system)
And(CTRL, 0x1D, CTRL)
#if 0 // For now, nothing to do
If (Not(And(CDW1, 1))) { // Query flag clear?
// Disable GPEs for features granted native control.
If (And(CTRL, 0x01)) { // Hot plug control granted?
Store(0, HPCE) // clear the hot plug SCI enable bit
Store(1, HPCS) // clear the hot plug SCI status bit
}
If (And(CTRL, 0x04)) { // PME control granted?
Store(0, PMCE) // clear the PME SCI enable bit
Store(1, PMCS) // clear the PME SCI status bit
}
If (And(CTRL, 0x10)) { // OS restoring PCI Express cap structure?
// Set status to not restore PCI Express cap structure
// upon resume from S3
Store(1, S3CR)
}
}
#endif
If (LNotEqual(Arg1, One)) {
// Unknown revision
Or(CDW1, 0x08, CDW1)
}
If (LNotEqual(CDW3, CTRL)) {
// Capabilities bits were masked
Or(CDW1, 0x10, CDW1)
}
// Update DWORD3 in the buffer
Store(CTRL, CDW3)
} Else {
Or(CDW1, 4, CDW1) // Unrecognized UUID
}
Return (Arg3)
}
}
}
#include "acpi-dsdt-pci-crs.dsl"
#include "acpi-dsdt-hpet.dsl"
/****************************************************************
* LPC ISA bridge
****************************************************************/
Scope(\_SB.PCI0) {
/* PCI D31:f0 LPC ISA bridge */
Device(ISA) {
Name (_ADR, 0x001F0000) // _ADR: Address
/* ICH9 PCI to ISA irq remapping */
OperationRegion(PIRQ, PCI_Config, 0x60, 0x0C)
OperationRegion(LPCD, PCI_Config, 0x80, 0x2)
Field(LPCD, AnyAcc, NoLock, Preserve) {
COMA, 3,
, 1,
COMB, 3,
Offset(0x01),
LPTD, 2,
, 2,
FDCD, 2
}
OperationRegion(LPCE, PCI_Config, 0x82, 0x2)
Field(LPCE, AnyAcc, NoLock, Preserve) {
CAEN, 1,
CBEN, 1,
LPEN, 1,
FDEN, 1
}
}
}
#define DSDT_APPLESMC_STA q35_dsdt_applesmc_sta
#include "acpi-dsdt-isa.dsl"
/****************************************************************
* PCI IRQs
****************************************************************/
/* Zero => PIC mode, One => APIC Mode */
Name(\PICF, Zero)
Method(\_PIC, 1, NotSerialized) {
Store(Arg0, \PICF)
}
Scope(\_SB) {
Scope(PCI0) {
#define prt_slot_lnk(nr, lnk0, lnk1, lnk2, lnk3) \
Package() { nr##ffff, 0, lnk0, 0 }, \
Package() { nr##ffff, 1, lnk1, 0 }, \
Package() { nr##ffff, 2, lnk2, 0 }, \
Package() { nr##ffff, 3, lnk3, 0 }
#define prt_slot_lnkA(nr) prt_slot_lnk(nr, LNKA, LNKB, LNKC, LNKD)
#define prt_slot_lnkB(nr) prt_slot_lnk(nr, LNKB, LNKC, LNKD, LNKA)
#define prt_slot_lnkC(nr) prt_slot_lnk(nr, LNKC, LNKD, LNKA, LNKB)
#define prt_slot_lnkD(nr) prt_slot_lnk(nr, LNKD, LNKA, LNKB, LNKC)
#define prt_slot_lnkE(nr) prt_slot_lnk(nr, LNKE, LNKF, LNKG, LNKH)
#define prt_slot_lnkF(nr) prt_slot_lnk(nr, LNKF, LNKG, LNKH, LNKE)
#define prt_slot_lnkG(nr) prt_slot_lnk(nr, LNKG, LNKH, LNKE, LNKF)
#define prt_slot_lnkH(nr) prt_slot_lnk(nr, LNKH, LNKE, LNKF, LNKG)
Name(PRTP, package() {
prt_slot_lnkE(0x0000),
prt_slot_lnkF(0x0001),
prt_slot_lnkG(0x0002),
prt_slot_lnkH(0x0003),
prt_slot_lnkE(0x0004),
prt_slot_lnkF(0x0005),
prt_slot_lnkG(0x0006),
prt_slot_lnkH(0x0007),
prt_slot_lnkE(0x0008),
prt_slot_lnkF(0x0009),
prt_slot_lnkG(0x000a),
prt_slot_lnkH(0x000b),
prt_slot_lnkE(0x000c),
prt_slot_lnkF(0x000d),
prt_slot_lnkG(0x000e),
prt_slot_lnkH(0x000f),
prt_slot_lnkE(0x0010),
prt_slot_lnkF(0x0011),
prt_slot_lnkG(0x0012),
prt_slot_lnkH(0x0013),
prt_slot_lnkE(0x0014),
prt_slot_lnkF(0x0015),
prt_slot_lnkG(0x0016),
prt_slot_lnkH(0x0017),
prt_slot_lnkE(0x0018),
/* INTA -> PIRQA for slot 25 - 31
see the default value of D<N>IR */
prt_slot_lnkA(0x0019),
prt_slot_lnkA(0x001a),
prt_slot_lnkA(0x001b),
prt_slot_lnkA(0x001c),
prt_slot_lnkA(0x001d),
/* PCIe->PCI bridge. use PIRQ[E-H] */
prt_slot_lnkE(0x001e),
prt_slot_lnkA(0x001f)
})
#define prt_slot_gsi(nr, gsi0, gsi1, gsi2, gsi3) \
Package() { nr##ffff, 0, gsi0, 0 }, \
Package() { nr##ffff, 1, gsi1, 0 }, \
Package() { nr##ffff, 2, gsi2, 0 }, \
Package() { nr##ffff, 3, gsi3, 0 }
#define prt_slot_gsiA(nr) prt_slot_gsi(nr, GSIA, GSIB, GSIC, GSID)
#define prt_slot_gsiB(nr) prt_slot_gsi(nr, GSIB, GSIC, GSID, GSIA)
#define prt_slot_gsiC(nr) prt_slot_gsi(nr, GSIC, GSID, GSIA, GSIB)
#define prt_slot_gsiD(nr) prt_slot_gsi(nr, GSID, GSIA, GSIB, GSIC)
#define prt_slot_gsiE(nr) prt_slot_gsi(nr, GSIE, GSIF, GSIG, GSIH)
#define prt_slot_gsiF(nr) prt_slot_gsi(nr, GSIF, GSIG, GSIH, GSIE)
#define prt_slot_gsiG(nr) prt_slot_gsi(nr, GSIG, GSIH, GSIE, GSIF)
#define prt_slot_gsiH(nr) prt_slot_gsi(nr, GSIH, GSIE, GSIF, GSIG)
Name(PRTA, package() {
prt_slot_gsiE(0x0000),
prt_slot_gsiF(0x0001),
prt_slot_gsiG(0x0002),
prt_slot_gsiH(0x0003),
prt_slot_gsiE(0x0004),
prt_slot_gsiF(0x0005),
prt_slot_gsiG(0x0006),
prt_slot_gsiH(0x0007),
prt_slot_gsiE(0x0008),
prt_slot_gsiF(0x0009),
prt_slot_gsiG(0x000a),
prt_slot_gsiH(0x000b),
prt_slot_gsiE(0x000c),
prt_slot_gsiF(0x000d),
prt_slot_gsiG(0x000e),
prt_slot_gsiH(0x000f),
prt_slot_gsiE(0x0010),
prt_slot_gsiF(0x0011),
prt_slot_gsiG(0x0012),
prt_slot_gsiH(0x0013),
prt_slot_gsiE(0x0014),
prt_slot_gsiF(0x0015),
prt_slot_gsiG(0x0016),
prt_slot_gsiH(0x0017),
prt_slot_gsiE(0x0018),
/* INTA -> PIRQA for slot 25 - 31, but 30
see the default value of D<N>IR */
prt_slot_gsiA(0x0019),
prt_slot_gsiA(0x001a),
prt_slot_gsiA(0x001b),
prt_slot_gsiA(0x001c),
prt_slot_gsiA(0x001d),
/* PCIe->PCI bridge. use PIRQ[E-H] */
prt_slot_gsiE(0x001e),
prt_slot_gsiA(0x001f)
})
Method(_PRT, 0, NotSerialized) {
/* PCI IRQ routing table, example from ACPI 2.0a specification,
section 6.2.8.1 */
/* Note: we provide the same info as the PCI routing
table of the Bochs BIOS */
If (LEqual(\PICF, Zero)) {
Return (PRTP)
} Else {
Return (PRTA)
}
}
}
Field(PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve) {
PRQA, 8,
PRQB, 8,
PRQC, 8,
PRQD, 8,
Offset(0x08),
PRQE, 8,
PRQF, 8,
PRQG, 8,
PRQH, 8
}
Method(IQST, 1, NotSerialized) {
// _STA method - get status
If (And(0x80, Arg0)) {
Return (0x09)
}
Return (0x0B)
}
Method(IQCR, 1, Serialized) {
// _CRS method - get current settings
Name(PRR0, ResourceTemplate() {
Interrupt(, Level, ActiveHigh, Shared) { 0 }
})
CreateDWordField(PRR0, 0x05, PRRI)
Store(And(Arg0, 0x0F), PRRI)
Return (PRR0)
}
#define define_link(link, uid, reg) \
Device(link) { \
Name(_HID, EISAID("PNP0C0F")) \
Name(_UID, uid) \
Name(_PRS, ResourceTemplate() { \
Interrupt(, Level, ActiveHigh, Shared) { \
5, 10, 11 \
} \
}) \
Method(_STA, 0, NotSerialized) { \
Return (IQST(reg)) \
} \
Method(_DIS, 0, NotSerialized) { \
Or(reg, 0x80, reg) \
} \
Method(_CRS, 0, NotSerialized) { \
Return (IQCR(reg)) \
} \
Method(_SRS, 1, NotSerialized) { \
CreateDWordField(Arg0, 0x05, PRRI) \
Store(PRRI, reg) \
} \
}
define_link(LNKA, 0, PRQA)
define_link(LNKB, 1, PRQB)
define_link(LNKC, 2, PRQC)
define_link(LNKD, 3, PRQD)
define_link(LNKE, 4, PRQE)
define_link(LNKF, 5, PRQF)
define_link(LNKG, 6, PRQG)
define_link(LNKH, 7, PRQH)
#define define_gsi_link(link, uid, gsi) \
Device(link) { \
Name(_HID, EISAID("PNP0C0F")) \
Name(_UID, uid) \
Name(_PRS, ResourceTemplate() { \
Interrupt(, Level, ActiveHigh, Shared) { \
gsi \
} \
}) \
Name(_CRS, ResourceTemplate() { \
Interrupt(, Level, ActiveHigh, Shared) { \
gsi \
} \
}) \
Method(_SRS, 1, NotSerialized) { \
} \
}
define_gsi_link(GSIA, 0, 0x10)
define_gsi_link(GSIB, 0, 0x11)
define_gsi_link(GSIC, 0, 0x12)
define_gsi_link(GSID, 0, 0x13)
define_gsi_link(GSIE, 0, 0x14)
define_gsi_link(GSIF, 0, 0x15)
define_gsi_link(GSIG, 0, 0x16)
define_gsi_link(GSIH, 0, 0x17)
}
#include "hw/acpi/cpu_hotplug_defs.h"
#define CPU_STATUS_BASE ICH9_CPU_HOTPLUG_IO_BASE
#include "acpi-dsdt-cpu-hotplug.dsl"
/****************************************************************
* General purpose events
****************************************************************/
Scope(\_GPE) {
Name(_HID, "ACPI0006")
Method(_L00) {
}
Method(_L01) {
}
Method(_E02) {
// CPU hotplug event
\_SB.PRSC()
}
Method(_L03) {
}
Method(_L04) {
}
Method(_L05) {
}
Method(_L06) {
}
Method(_L07) {
}
Method(_L08) {
}
Method(_L09) {
}
Method(_L0A) {
}
Method(_L0B) {
}
Method(_L0C) {
}
Method(_L0D) {
}
Method(_L0E) {
}
Method(_L0F) {
}
}
}
Reference in New Issue View Git Blame Copy Permalink