qemu-e2k/hw/xtensa_pic.c
Max Filippov 890c6333b2 target-xtensa: fix guest hang on masked CCOMPARE interrupt
QEMU timer is used to post CCOMPARE interrupt when the core is halted.
If that CCOMPARE interrupt is masked off then the timer must be rearmed
in the callback, otherwise it will be rearmed next time the core goes to
halt by the waiti instruction.

Add test case into timer testsuite.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-15 21:03:03 +00:00

160 lines
5.4 KiB
C

/*
* Copyright (c) 2011, Max Filippov, Open Source and Linux Lab.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the Open Source and Linux Lab nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "hw.h"
#include "pc.h"
#include "qemu-log.h"
#include "qemu-timer.h"
/* Stub functions for hardware that doesn't exist. */
void pic_info(Monitor *mon)
{
}
void irq_info(Monitor *mon)
{
}
void xtensa_advance_ccount(CPUState *env, uint32_t d)
{
uint32_t old_ccount = env->sregs[CCOUNT];
env->sregs[CCOUNT] += d;
if (xtensa_option_enabled(env->config, XTENSA_OPTION_TIMER_INTERRUPT)) {
int i;
for (i = 0; i < env->config->nccompare; ++i) {
if (env->sregs[CCOMPARE + i] - old_ccount <= d) {
xtensa_timer_irq(env, i, 1);
}
}
}
}
void check_interrupts(CPUState *env)
{
int minlevel = xtensa_get_cintlevel(env);
uint32_t int_set_enabled = env->sregs[INTSET] & env->sregs[INTENABLE];
int level;
/* If the CPU is halted advance CCOUNT according to the vm_clock time
* elapsed since the moment when it was advanced last time.
*/
if (env->halted) {
int64_t now = qemu_get_clock_ns(vm_clock);
xtensa_advance_ccount(env,
muldiv64(now - env->halt_clock,
env->config->clock_freq_khz, 1000000));
env->halt_clock = now;
}
for (level = env->config->nlevel; level > minlevel; --level) {
if (env->config->level_mask[level] & int_set_enabled) {
env->pending_irq_level = level;
cpu_interrupt(env, CPU_INTERRUPT_HARD);
qemu_log_mask(CPU_LOG_INT,
"%s level = %d, cintlevel = %d, "
"pc = %08x, a0 = %08x, ps = %08x, "
"intset = %08x, intenable = %08x, "
"ccount = %08x\n",
__func__, level, xtensa_get_cintlevel(env),
env->pc, env->regs[0], env->sregs[PS],
env->sregs[INTSET], env->sregs[INTENABLE],
env->sregs[CCOUNT]);
return;
}
}
env->pending_irq_level = 0;
cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
}
static void xtensa_set_irq(void *opaque, int irq, int active)
{
CPUState *env = opaque;
if (irq >= env->config->ninterrupt) {
qemu_log("%s: bad IRQ %d\n", __func__, irq);
} else {
uint32_t irq_bit = 1 << irq;
if (active) {
env->sregs[INTSET] |= irq_bit;
} else if (env->config->interrupt[irq].inttype == INTTYPE_LEVEL) {
env->sregs[INTSET] &= ~irq_bit;
}
check_interrupts(env);
}
}
void xtensa_timer_irq(CPUState *env, uint32_t id, uint32_t active)
{
qemu_set_irq(env->irq_inputs[env->config->timerint[id]], active);
}
void xtensa_rearm_ccompare_timer(CPUState *env)
{
int i;
uint32_t wake_ccount = env->sregs[CCOUNT] - 1;
for (i = 0; i < env->config->nccompare; ++i) {
if (env->sregs[CCOMPARE + i] - env->sregs[CCOUNT] <
wake_ccount - env->sregs[CCOUNT]) {
wake_ccount = env->sregs[CCOMPARE + i];
}
}
env->wake_ccount = wake_ccount;
qemu_mod_timer(env->ccompare_timer, env->halt_clock +
muldiv64(wake_ccount - env->sregs[CCOUNT],
1000000, env->config->clock_freq_khz));
}
static void xtensa_ccompare_cb(void *opaque)
{
CPUState *env = opaque;
if (env->halted) {
env->halt_clock = qemu_get_clock_ns(vm_clock);
xtensa_advance_ccount(env, env->wake_ccount - env->sregs[CCOUNT]);
if (!cpu_has_work(env)) {
env->sregs[CCOUNT] = env->wake_ccount + 1;
xtensa_rearm_ccompare_timer(env);
}
}
}
void xtensa_irq_init(CPUState *env)
{
env->irq_inputs = (void **)qemu_allocate_irqs(
xtensa_set_irq, env, env->config->ninterrupt);
if (xtensa_option_enabled(env->config, XTENSA_OPTION_TIMER_INTERRUPT) &&
env->config->nccompare > 0) {
env->ccompare_timer =
qemu_new_timer_ns(vm_clock, &xtensa_ccompare_cb, env);
}
}