qemu-e2k/hw/ppc/ppc440_bamboo.c
Markus Armbruster c165473269 hw: Clean up bogus default boot order
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.

Machines that care:

* pc and its variants

  Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
  'c', 'd' and 'n'.  Reject all others (fatal with -boot).

* nseries (n800, n810)

  Check whether order starts with 'n'.  Silently ignored otherwise.

* prep, g3beige, mac99

  Extract the first character the machine understands (subset of
  'a'..'f').  Silently ignored otherwise.

* spapr

  Accept an arbitrary string (vl.c restricts it to contain only
  'a'..'p', no duplicates).

* sun4[mdc]

  Use the first character.  Silently ignored otherwise.

Strip characters these machines ignore from their default boot order.

For all other machines, remove the unused default boot order
alltogether.

Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28 10:16:47 +03:00

307 lines
9.6 KiB
C

/*
* QEMU PowerPC 440 Bamboo board emulation
*
* Copyright 2007 IBM Corporation.
* Authors:
* Jerone Young <jyoung5@us.ibm.com>
* Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
* Hollis Blanchard <hollisb@us.ibm.com>
*
* This work is licensed under the GNU GPL license version 2 or later.
*
*/
#include "config.h"
#include "qemu-common.h"
#include "net/net.h"
#include "hw/hw.h"
#include "hw/pci/pci.h"
#include "hw/boards.h"
#include "sysemu/kvm.h"
#include "kvm_ppc.h"
#include "sysemu/device_tree.h"
#include "hw/loader.h"
#include "elf.h"
#include "exec/address-spaces.h"
#include "hw/char/serial.h"
#include "hw/ppc/ppc.h"
#include "ppc405.h"
#include "sysemu/sysemu.h"
#include "hw/sysbus.h"
#define BINARY_DEVICE_TREE_FILE "bamboo.dtb"
/* from u-boot */
#define KERNEL_ADDR 0x1000000
#define FDT_ADDR 0x1800000
#define RAMDISK_ADDR 0x1900000
#define PPC440EP_PCI_CONFIG 0xeec00000
#define PPC440EP_PCI_INTACK 0xeed00000
#define PPC440EP_PCI_SPECIAL 0xeed00000
#define PPC440EP_PCI_REGS 0xef400000
#define PPC440EP_PCI_IO 0xe8000000
#define PPC440EP_PCI_IOLEN 0x00010000
#define PPC440EP_SDRAM_NR_BANKS 4
static const unsigned int ppc440ep_sdram_bank_sizes[] = {
256<<20, 128<<20, 64<<20, 32<<20, 16<<20, 8<<20, 0
};
static hwaddr entry;
static int bamboo_load_device_tree(hwaddr addr,
uint32_t ramsize,
hwaddr initrd_base,
hwaddr initrd_size,
const char *kernel_cmdline)
{
int ret = -1;
uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) };
char *filename;
int fdt_size;
void *fdt;
uint32_t tb_freq = 400000000;
uint32_t clock_freq = 400000000;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
if (!filename) {
goto out;
}
fdt = load_device_tree(filename, &fdt_size);
g_free(filename);
if (fdt == NULL) {
goto out;
}
/* Manipulate device tree in memory. */
ret = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
sizeof(mem_reg_property));
if (ret < 0)
fprintf(stderr, "couldn't set /memory/reg\n");
ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-start",
initrd_base);
if (ret < 0)
fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");
ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-end",
(initrd_base + initrd_size));
if (ret < 0)
fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");
ret = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
kernel_cmdline);
if (ret < 0)
fprintf(stderr, "couldn't set /chosen/bootargs\n");
/* Copy data from the host device tree into the guest. Since the guest can
* directly access the timebase without host involvement, we must expose
* the correct frequencies. */
if (kvm_enabled()) {
tb_freq = kvmppc_get_tbfreq();
clock_freq = kvmppc_get_clockfreq();
}
qemu_devtree_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency",
clock_freq);
qemu_devtree_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency",
tb_freq);
ret = rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
g_free(fdt);
out:
return ret;
}
/* Create reset TLB entries for BookE, spanning the 32bit addr space. */
static void mmubooke_create_initial_mapping(CPUPPCState *env,
target_ulong va,
hwaddr pa)
{
ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
tlb->attr = 0;
tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
tlb->size = 1 << 31; /* up to 0x80000000 */
tlb->EPN = va & TARGET_PAGE_MASK;
tlb->RPN = pa & TARGET_PAGE_MASK;
tlb->PID = 0;
tlb = &env->tlb.tlbe[1];
tlb->attr = 0;
tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
tlb->size = 1 << 31; /* up to 0xffffffff */
tlb->EPN = 0x80000000 & TARGET_PAGE_MASK;
tlb->RPN = 0x80000000 & TARGET_PAGE_MASK;
tlb->PID = 0;
}
static void main_cpu_reset(void *opaque)
{
PowerPCCPU *cpu = opaque;
CPUPPCState *env = &cpu->env;
cpu_reset(CPU(cpu));
env->gpr[1] = (16<<20) - 8;
env->gpr[3] = FDT_ADDR;
env->nip = entry;
/* Create a mapping for the kernel. */
mmubooke_create_initial_mapping(env, 0, 0);
}
static void bamboo_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *isa = g_new(MemoryRegion, 1);
MemoryRegion *ram_memories
= g_malloc(PPC440EP_SDRAM_NR_BANKS * sizeof(*ram_memories));
hwaddr ram_bases[PPC440EP_SDRAM_NR_BANKS];
hwaddr ram_sizes[PPC440EP_SDRAM_NR_BANKS];
qemu_irq *pic;
qemu_irq *irqs;
PCIBus *pcibus;
PowerPCCPU *cpu;
CPUPPCState *env;
uint64_t elf_entry;
uint64_t elf_lowaddr;
hwaddr loadaddr = 0;
target_long initrd_size = 0;
DeviceState *dev;
int success;
int i;
/* Setup CPU. */
if (cpu_model == NULL) {
cpu_model = "440EP";
}
cpu = cpu_ppc_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "Unable to initialize CPU!\n");
exit(1);
}
env = &cpu->env;
qemu_register_reset(main_cpu_reset, cpu);
ppc_booke_timers_init(cpu, 400000000, 0);
ppc_dcr_init(env, NULL, NULL);
/* interrupt controller */
irqs = g_malloc0(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);
/* SDRAM controller */
memset(ram_bases, 0, sizeof(ram_bases));
memset(ram_sizes, 0, sizeof(ram_sizes));
ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS,
ram_memories,
ram_bases, ram_sizes,
ppc440ep_sdram_bank_sizes);
/* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
ram_bases, ram_sizes, 1);
/* PCI */
dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE,
PPC440EP_PCI_CONFIG,
pic[pci_irq_nrs[0]], pic[pci_irq_nrs[1]],
pic[pci_irq_nrs[2]], pic[pci_irq_nrs[3]],
NULL);
pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (!pcibus) {
fprintf(stderr, "couldn't create PCI controller!\n");
exit(1);
}
memory_region_init_alias(isa, NULL, "isa_mmio",
get_system_io(), 0, PPC440EP_PCI_IOLEN);
memory_region_add_subregion(get_system_memory(), PPC440EP_PCI_IO, isa);
if (serial_hds[0] != NULL) {
serial_mm_init(address_space_mem, 0xef600300, 0, pic[0],
PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
DEVICE_BIG_ENDIAN);
}
if (serial_hds[1] != NULL) {
serial_mm_init(address_space_mem, 0xef600400, 0, pic[1],
PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
DEVICE_BIG_ENDIAN);
}
if (pcibus) {
/* Register network interfaces. */
for (i = 0; i < nb_nics; i++) {
/* There are no PCI NICs on the Bamboo board, but there are
* PCI slots, so we can pick whatever default model we want. */
pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL);
}
}
/* Load kernel. */
if (kernel_filename) {
success = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
if (success < 0) {
success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
&elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
entry = elf_entry;
loadaddr = elf_lowaddr;
}
/* XXX try again as binary */
if (success < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
/* Load initrd. */
if (initrd_filename) {
initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
ram_size - RAMDISK_ADDR);
if (initrd_size < 0) {
fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
initrd_filename, RAMDISK_ADDR);
exit(1);
}
}
/* If we're loading a kernel directly, we must load the device tree too. */
if (kernel_filename) {
if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
initrd_size, kernel_cmdline) < 0) {
fprintf(stderr, "couldn't load device tree\n");
exit(1);
}
}
if (kvm_enabled())
kvmppc_init();
}
static QEMUMachine bamboo_machine = {
.name = "bamboo",
.desc = "bamboo",
.init = bamboo_init,
};
static void bamboo_machine_init(void)
{
qemu_register_machine(&bamboo_machine);
}
machine_init(bamboo_machine_init);