OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
8be2094648
qemu-e2k/hw/arm/raspi.c
Philippe Mathieu-Daudé d031379803 hw/arm: Use object_initialize_child for correct reference counting 
As explained in commit aff39be0ed:

  Both functions, object_initialize() and object_property_add_child()
  increase the reference counter of the new object, so one of the
  references has to be dropped afterwards to get the reference
  counting right. Otherwise the child object will not be properly
  cleaned up when the parent gets destroyed.
  Thus let's use now object_initialize_child() instead to get the
  reference counting here right.

This patch was generated using the following Coccinelle script
(with a bit of manual fix-up for overly long lines):

 @use_object_initialize_child@
 expression parent_obj;
 expression child_ptr;
 expression child_name;
 expression child_type;
 expression child_size;
 expression errp;
 @@
 (
 -   object_initialize(child_ptr, child_size, child_type);
 +   object_initialize_child(parent_obj, child_name,  child_ptr, child_size,
 +                           child_type, &error_abort, NULL);
     ... when != parent_obj
 -   object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL);
     ...
 ?-  object_unref(OBJECT(child_ptr));
 |
 -   object_initialize(child_ptr, child_size, child_type);
 +   object_initialize_child(parent_obj, child_name,  child_ptr, child_size,
 +                            child_type, errp, NULL);
     ... when != parent_obj
 -   object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp);
     ...
 ?-  object_unref(OBJECT(child_ptr));
 )

 @use_sysbus_init_child_obj@
 expression parent_obj;
 expression dev;
 expression child_ptr;
 expression child_name;
 expression child_type;
 expression child_size;
 expression errp;
 @@
 (
 -   object_initialize_child(parent_obj, child_name, child_ptr, child_size,
 -                           child_type, errp, NULL);
 +   sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size,
 +                         child_type);
     ...
 -   qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default());
 |
 -   object_initialize_child(parent_obj, child_name, child_ptr, child_size,
 -                           child_type, errp, NULL);
 +   sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size,
 +                         child_type);
 -   dev = DEVICE(child_ptr);
 -   qdev_set_parent_bus(dev, sysbus_get_default());
 )

While the object_initialize() function doesn't take an
'Error *errp' argument, the object_initialize_child() does.
Since this code is used when a machine is created (and is not
yet running), we deliberately choose to use the &error_abort
argument instead of ignoring errors if an object creation failed.
This choice also matches when using sysbus_init_child_obj(),
since its code is:

  void sysbus_init_child_obj(Object *parent,
                             const char *childname, void *child,
                             size_t childsize, const char *childtype)
  {
      object_initialize_child(parent, childname, child, childsize,
                              childtype, &error_abort, NULL);

      qdev_set_parent_bus(DEVICE(child), sysbus_get_default());
  }

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190507163416.24647-9-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24 15:29:02 -03:00

264 lines
9.3 KiB
C
Raw Blame History

/*
* Raspberry Pi emulation (c) 2012 Gregory Estrade
* Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
*
* Rasperry Pi 2 emulation Copyright (c) 2015, Microsoft
* Written by Andrew Baumann
*
* Raspberry Pi 3 emulation Copyright (c) 2018 Zoltán Baldaszti
* Upstream code cleanup (c) 2018 Pekka Enberg
*
* This code is licensed under the GNU GPLv2 and later.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/arm/bcm2836.h"
#include "qemu/error-report.h"
#include "hw/boards.h"
#include "hw/loader.h"
#include "hw/arm/boot.h"
#include "sysemu/sysemu.h"
#define SMPBOOT_ADDR 0x300 /* this should leave enough space for ATAGS */
#define MVBAR_ADDR 0x400 /* secure vectors */
#define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */
#define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default */
#define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel.img here by default */
#define SPINTABLE_ADDR 0xd8 /* Pi 3 bootloader spintable */
/* Table of Linux board IDs for different Pi versions */
static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
typedef struct RasPiState {
BCM283XState soc;
MemoryRegion ram;
} RasPiState;
static void write_smpboot(ARMCPU *cpu, const struct arm_boot_info *info)
{
static const uint32_t smpboot[] = {
0xe1a0e00f, /* mov lr, pc */
0xe3a0fe00 + (BOARDSETUP_ADDR >> 4), /* mov pc, BOARDSETUP_ADDR */
0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5;get core ID */
0xe7e10050, /* ubfx r0, r0, #0, #2 ;extract LSB */
0xe59f5014, /* ldr r5, =0x400000CC ;load mbox base */
0xe320f001, /* 1: yield */
0xe7953200, /* ldr r3, [r5, r0, lsl #4] ;read mbox for our core*/
0xe3530000, /* cmp r3, #0 ;spin while zero */
0x0afffffb, /* beq 1b */
0xe7853200, /* str r3, [r5, r0, lsl #4] ;clear mbox */
0xe12fff13, /* bx r3 ;jump to target */
0x400000cc, /* (constant: mailbox 3 read/clear base) */
};
/* check that we don't overrun board setup vectors */
QEMU_BUILD_BUG_ON(SMPBOOT_ADDR + sizeof(smpboot) > MVBAR_ADDR);
/* check that board setup address is correctly relocated */
QEMU_BUILD_BUG_ON((BOARDSETUP_ADDR & 0xf) != 0
|| (BOARDSETUP_ADDR >> 4) >= 0x100);
rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot),
info->smp_loader_start);
}
static void write_smpboot64(ARMCPU *cpu, const struct arm_boot_info *info)
{
/* Unlike the AArch32 version we don't need to call the board setup hook.
* The mechanism for doing the spin-table is also entirely different.
* We must have four 64-bit fields at absolute addresses
* 0xd8, 0xe0, 0xe8, 0xf0 in RAM, which are the flag variables for
* our CPUs, and which we must ensure are zero initialized before
* the primary CPU goes into the kernel. We put these variables inside
* a rom blob, so that the reset for ROM contents zeroes them for us.
*/
static const uint32_t smpboot[] = {
0xd2801b05, /* mov x5, 0xd8 */
0xd53800a6, /* mrs x6, mpidr_el1 */
0x924004c6, /* and x6, x6, #0x3 */
0xd503205f, /* spin: wfe */
0xf86678a4, /* ldr x4, [x5,x6,lsl #3] */
0xb4ffffc4, /* cbz x4, spin */
0xd2800000, /* mov x0, #0x0 */
0xd2800001, /* mov x1, #0x0 */
0xd2800002, /* mov x2, #0x0 */
0xd2800003, /* mov x3, #0x0 */
0xd61f0080, /* br x4 */
};
static const uint64_t spintables[] = {
0, 0, 0, 0
};
rom_add_blob_fixed("raspi_smpboot", smpboot, sizeof(smpboot),
info->smp_loader_start);
rom_add_blob_fixed("raspi_spintables", spintables, sizeof(spintables),
SPINTABLE_ADDR);
}
static void write_board_setup(ARMCPU *cpu, const struct arm_boot_info *info)
{
arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR);
}
static void reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info)
{
CPUState *cs = CPU(cpu);
cpu_set_pc(cs, info->smp_loader_start);
}
static void setup_boot(MachineState *machine, int version, size_t ram_size)
{
static struct arm_boot_info binfo;
int r;
binfo.board_id = raspi_boardid[version];
binfo.ram_size = ram_size;
binfo.nb_cpus = smp_cpus;
if (version <= 2) {
/* The rpi1 and 2 require some custom setup code to run in Secure
* mode before booting a kernel (to set up the SMC vectors so
* that we get a no-op SMC; this is used by Linux to call the
* firmware for some cache maintenance operations.
* The rpi3 doesn't need this.
*/
binfo.board_setup_addr = BOARDSETUP_ADDR;
binfo.write_board_setup = write_board_setup;
binfo.secure_board_setup = true;
binfo.secure_boot = true;
}
/* Pi2 and Pi3 requires SMP setup */
if (version >= 2) {
binfo.smp_loader_start = SMPBOOT_ADDR;
if (version == 2) {
binfo.write_secondary_boot = write_smpboot;
} else {
binfo.write_secondary_boot = write_smpboot64;
}
binfo.secondary_cpu_reset_hook = reset_secondary;
}
/* If the user specified a "firmware" image (e.g. UEFI), we bypass
* the normal Linux boot process
*/
if (machine->firmware) {
hwaddr firmware_addr = version == 3 ? FIRMWARE_ADDR_3 : FIRMWARE_ADDR_2;
/* load the firmware image (typically kernel.img) */
r = load_image_targphys(machine->firmware, firmware_addr,
ram_size - firmware_addr);
if (r < 0) {
error_report("Failed to load firmware from %s", machine->firmware);
exit(1);
}
binfo.entry = firmware_addr;
binfo.firmware_loaded = true;
} else {
binfo.kernel_filename = machine->kernel_filename;
binfo.kernel_cmdline = machine->kernel_cmdline;
binfo.initrd_filename = machine->initrd_filename;
}
arm_load_kernel(ARM_CPU(first_cpu), &binfo);
}
static void raspi_init(MachineState *machine, int version)
{
RasPiState *s = g_new0(RasPiState, 1);
uint32_t vcram_size;
DriveInfo *di;
BlockBackend *blk;
BusState *bus;
DeviceState *carddev;
if (machine->ram_size > 1 * GiB) {
error_report("Requested ram size is too large for this machine: "
"maximum is 1GB");
exit(1);
}
object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc),
version == 3 ? TYPE_BCM2837 : TYPE_BCM2836,
&error_abort, NULL);
/* Allocate and map RAM */
memory_region_allocate_system_memory(&s->ram, OBJECT(machine), "ram",
machine->ram_size);
/* FIXME: Remove when we have custom CPU address space support */
memory_region_add_subregion_overlap(get_system_memory(), 0, &s->ram, 0);
/* Setup the SOC */
object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram),
&error_abort);
object_property_set_int(OBJECT(&s->soc), smp_cpus, "enabled-cpus",
&error_abort);
int board_rev = version == 3 ? 0xa02082 : 0xa21041;
object_property_set_int(OBJECT(&s->soc), board_rev, "board-rev",
&error_abort);
object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_abort);
/* Create and plug in the SD cards */
di = drive_get_next(IF_SD);
blk = di ? blk_by_legacy_dinfo(di) : NULL;
bus = qdev_get_child_bus(DEVICE(&s->soc), "sd-bus");
if (bus == NULL) {
error_report("No SD bus found in SOC object");
exit(1);
}
carddev = qdev_create(bus, TYPE_SD_CARD);
qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal);
vcram_size = object_property_get_uint(OBJECT(&s->soc), "vcram-size",
&error_abort);
setup_boot(machine, version, machine->ram_size - vcram_size);
}
static void raspi2_init(MachineState *machine)
{
raspi_init(machine, 2);
}
static void raspi2_machine_init(MachineClass *mc)
{
mc->desc = "Raspberry Pi 2";
mc->init = raspi2_init;
mc->block_default_type = IF_SD;
mc->no_parallel = 1;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->max_cpus = BCM283X_NCPUS;
mc->min_cpus = BCM283X_NCPUS;
mc->default_cpus = BCM283X_NCPUS;
mc->default_ram_size = 1024 * 1024 * 1024;
mc->ignore_memory_transaction_failures = true;
};
DEFINE_MACHINE("raspi2", raspi2_machine_init)
#ifdef TARGET_AARCH64
static void raspi3_init(MachineState *machine)
{
raspi_init(machine, 3);
}
static void raspi3_machine_init(MachineClass *mc)
{
mc->desc = "Raspberry Pi 3";
mc->init = raspi3_init;
mc->block_default_type = IF_SD;
mc->no_parallel = 1;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->max_cpus = BCM283X_NCPUS;
mc->min_cpus = BCM283X_NCPUS;
mc->default_cpus = BCM283X_NCPUS;
mc->default_ram_size = 1024 * 1024 * 1024;
}
DEFINE_MACHINE("raspi3", raspi3_machine_init)
#endif
Reference in New Issue View Git Blame Copy Permalink