8d18ddcd22
Add two module properties, "zoned.max_active" and "zoned.max_open" to control the maximum number of zones that can be active or open. Once these variables are set to non-default values, these limits are checked during I/O and Too Many Active or Too Many Open command status is returned if they are exceeded. Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Niklas Cassel <Niklas.Cassel@wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
224 lines
20 KiB
Plaintext
224 lines
20 KiB
Plaintext
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
# fdc.c
|
|
fdc_ioport_read(uint8_t reg, uint8_t value) "read reg 0x%02x val 0x%02x"
|
|
fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x"
|
|
|
|
# pflash_cfi01.c
|
|
# pflash_cfi02.c
|
|
pflash_reset(void) "reset"
|
|
pflash_timer_expired(uint8_t cmd) "command 0x%02x done"
|
|
pflash_io_read(uint64_t offset, unsigned size, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x cmd:0x%02x wcycle:%u"
|
|
pflash_io_write(uint64_t offset, unsigned size, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" size:%u value:0x%04x wcycle:%u"
|
|
pflash_data_read(uint64_t offset, unsigned size, uint32_t value) "data offset:0x%04"PRIx64" size:%u value:0x%04x"
|
|
pflash_data_write(uint64_t offset, unsigned size, uint32_t value, uint64_t counter) "data offset:0x%04"PRIx64" size:%u value:0x%04x counter:0x%016"PRIx64
|
|
pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x"
|
|
pflash_device_id(uint16_t id) "Read Device ID: 0x%04x"
|
|
pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64
|
|
|
|
# virtio-blk.c
|
|
virtio_blk_req_complete(void *vdev, void *req, int status) "vdev %p req %p status %d"
|
|
virtio_blk_rw_complete(void *vdev, void *req, int ret) "vdev %p req %p ret %d"
|
|
virtio_blk_handle_write(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_handle_read(void *vdev, void *req, uint64_t sector, size_t nsectors) "vdev %p req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_submit_multireq(void *vdev, void *mrb, int start, int num_reqs, uint64_t offset, size_t size, bool is_write) "vdev %p mrb %p start %d num_reqs %d offset %"PRIu64" size %zu is_write %d"
|
|
|
|
# hd-geometry.c
|
|
hd_geometry_lchs_guess(void *blk, int cyls, int heads, int secs) "blk %p LCHS %d %d %d"
|
|
hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "blk %p CHS %u %u %u trans %d"
|
|
|
|
# nvme.c
|
|
# nvme traces for successful events
|
|
pci_nvme_register_namespace(uint32_t nsid) "nsid %"PRIu32""
|
|
pci_nvme_irq_msix(uint32_t vector) "raising MSI-X IRQ vector %u"
|
|
pci_nvme_irq_pin(void) "pulsing IRQ pin"
|
|
pci_nvme_irq_masked(void) "IRQ is masked"
|
|
pci_nvme_dma_read(uint64_t prp1, uint64_t prp2) "DMA read, prp1=0x%"PRIx64" prp2=0x%"PRIx64""
|
|
pci_nvme_map_addr(uint64_t addr, uint64_t len) "addr 0x%"PRIx64" len %"PRIu64""
|
|
pci_nvme_map_addr_cmb(uint64_t addr, uint64_t len) "addr 0x%"PRIx64" len %"PRIu64""
|
|
pci_nvme_map_prp(uint64_t trans_len, uint32_t len, uint64_t prp1, uint64_t prp2, int num_prps) "trans_len %"PRIu64" len %"PRIu32" prp1 0x%"PRIx64" prp2 0x%"PRIx64" num_prps %d"
|
|
pci_nvme_map_sgl(uint16_t cid, uint8_t typ, uint64_t len) "cid %"PRIu16" type 0x%"PRIx8" len %"PRIu64""
|
|
pci_nvme_io_cmd(uint16_t cid, uint32_t nsid, uint16_t sqid, uint8_t opcode, const char *opname) "cid %"PRIu16" nsid %"PRIu32" sqid %"PRIu16" opc 0x%"PRIx8" opname '%s'"
|
|
pci_nvme_admin_cmd(uint16_t cid, uint16_t sqid, uint8_t opcode, const char *opname) "cid %"PRIu16" sqid %"PRIu16" opc 0x%"PRIx8" opname '%s'"
|
|
pci_nvme_read(uint16_t cid, uint32_t nsid, uint32_t nlb, uint64_t count, uint64_t lba) "cid %"PRIu16" nsid %"PRIu32" nlb %"PRIu32" count %"PRIu64" lba 0x%"PRIx64""
|
|
pci_nvme_write(uint16_t cid, const char *verb, uint32_t nsid, uint32_t nlb, uint64_t count, uint64_t lba) "cid %"PRIu16" opname '%s' nsid %"PRIu32" nlb %"PRIu32" count %"PRIu64" lba 0x%"PRIx64""
|
|
pci_nvme_rw_cb(uint16_t cid, const char *blkname) "cid %"PRIu16" blk '%s'"
|
|
pci_nvme_block_status(int64_t offset, int64_t bytes, int64_t pnum, int ret, bool zeroed) "offset %"PRId64" bytes %"PRId64" pnum %"PRId64" ret 0x%x zeroed %d"
|
|
pci_nvme_dsm(uint16_t cid, uint32_t nsid, uint32_t nr, uint32_t attr) "cid %"PRIu16" nsid %"PRIu32" nr %"PRIu32" attr 0x%"PRIx32""
|
|
pci_nvme_dsm_deallocate(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba %"PRIu64" nlb %"PRIu32""
|
|
pci_nvme_compare(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba 0x%"PRIx64" nlb %"PRIu32""
|
|
pci_nvme_compare_cb(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_aio_discard_cb(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16""
|
|
pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d"
|
|
pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
|
|
pci_nvme_del_cq(uint16_t cqid) "deleted completion queue, cqid=%"PRIu16""
|
|
pci_nvme_identify_ctrl(void) "identify controller"
|
|
pci_nvme_identify_ctrl_csi(uint8_t csi) "identify controller, csi=0x%"PRIx8""
|
|
pci_nvme_identify_ns(uint32_t ns) "nsid %"PRIu32""
|
|
pci_nvme_identify_ns_csi(uint32_t ns, uint8_t csi) "nsid=%"PRIu32", csi=0x%"PRIx8""
|
|
pci_nvme_identify_nslist(uint32_t ns) "nsid %"PRIu32""
|
|
pci_nvme_identify_nslist_csi(uint16_t ns, uint8_t csi) "nsid=%"PRIu16", csi=0x%"PRIx8""
|
|
pci_nvme_identify_cmd_set(void) "identify i/o command set"
|
|
pci_nvme_identify_ns_descr_list(uint32_t ns) "nsid %"PRIu32""
|
|
pci_nvme_get_log(uint16_t cid, uint8_t lid, uint8_t lsp, uint8_t rae, uint32_t len, uint64_t off) "cid %"PRIu16" lid 0x%"PRIx8" lsp 0x%"PRIx8" rae 0x%"PRIx8" len %"PRIu32" off %"PRIu64""
|
|
pci_nvme_getfeat(uint16_t cid, uint32_t nsid, uint8_t fid, uint8_t sel, uint32_t cdw11) "cid %"PRIu16" nsid 0x%"PRIx32" fid 0x%"PRIx8" sel 0x%"PRIx8" cdw11 0x%"PRIx32""
|
|
pci_nvme_setfeat(uint16_t cid, uint32_t nsid, uint8_t fid, uint8_t save, uint32_t cdw11) "cid %"PRIu16" nsid 0x%"PRIx32" fid 0x%"PRIx8" save 0x%"PRIx8" cdw11 0x%"PRIx32""
|
|
pci_nvme_getfeat_vwcache(const char* result) "get feature volatile write cache, result=%s"
|
|
pci_nvme_getfeat_numq(int result) "get feature number of queues, result=%d"
|
|
pci_nvme_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq) "requested cq_count=%d sq_count=%d, responding with cq_count=%d sq_count=%d"
|
|
pci_nvme_setfeat_timestamp(uint64_t ts) "set feature timestamp = 0x%"PRIx64""
|
|
pci_nvme_getfeat_timestamp(uint64_t ts) "get feature timestamp = 0x%"PRIx64""
|
|
pci_nvme_process_aers(int queued) "queued %d"
|
|
pci_nvme_aer(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_aer_aerl_exceeded(void) "aerl exceeded"
|
|
pci_nvme_aer_masked(uint8_t type, uint8_t mask) "type 0x%"PRIx8" mask 0x%"PRIx8""
|
|
pci_nvme_aer_post_cqe(uint8_t typ, uint8_t info, uint8_t log_page) "type 0x%"PRIx8" info 0x%"PRIx8" lid 0x%"PRIx8""
|
|
pci_nvme_enqueue_event(uint8_t typ, uint8_t info, uint8_t log_page) "type 0x%"PRIx8" info 0x%"PRIx8" lid 0x%"PRIx8""
|
|
pci_nvme_enqueue_event_noqueue(int queued) "queued %d"
|
|
pci_nvme_enqueue_event_masked(uint8_t typ) "type 0x%"PRIx8""
|
|
pci_nvme_no_outstanding_aers(void) "ignoring event; no outstanding AERs"
|
|
pci_nvme_enqueue_req_completion(uint16_t cid, uint16_t cqid, uint16_t status) "cid %"PRIu16" cqid %"PRIu16" status 0x%"PRIx16""
|
|
pci_nvme_mmio_read(uint64_t addr) "addr 0x%"PRIx64""
|
|
pci_nvme_mmio_write(uint64_t addr, uint64_t data) "addr 0x%"PRIx64" data 0x%"PRIx64""
|
|
pci_nvme_mmio_doorbell_cq(uint16_t cqid, uint16_t new_head) "cqid %"PRIu16" new_head %"PRIu16""
|
|
pci_nvme_mmio_doorbell_sq(uint16_t sqid, uint16_t new_tail) "sqid %"PRIu16" new_tail %"PRIu16""
|
|
pci_nvme_mmio_intm_set(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask set, data=0x%"PRIx64", new_mask=0x%"PRIx64""
|
|
pci_nvme_mmio_intm_clr(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask clr, data=0x%"PRIx64", new_mask=0x%"PRIx64""
|
|
pci_nvme_mmio_cfg(uint64_t data) "wrote MMIO, config controller config=0x%"PRIx64""
|
|
pci_nvme_mmio_aqattr(uint64_t data) "wrote MMIO, admin queue attributes=0x%"PRIx64""
|
|
pci_nvme_mmio_asqaddr(uint64_t data) "wrote MMIO, admin submission queue address=0x%"PRIx64""
|
|
pci_nvme_mmio_acqaddr(uint64_t data) "wrote MMIO, admin completion queue address=0x%"PRIx64""
|
|
pci_nvme_mmio_asqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin submission queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
|
|
pci_nvme_mmio_acqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin completion queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
|
|
pci_nvme_mmio_start_success(void) "setting controller enable bit succeeded"
|
|
pci_nvme_mmio_stopped(void) "cleared controller enable bit"
|
|
pci_nvme_mmio_shutdown_set(void) "shutdown bit set"
|
|
pci_nvme_mmio_shutdown_cleared(void) "shutdown bit cleared"
|
|
pci_nvme_open_zone(uint64_t slba, uint32_t zone_idx, int all) "open zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_close_zone(uint64_t slba, uint32_t zone_idx, int all) "close zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_finish_zone(uint64_t slba, uint32_t zone_idx, int all) "finish zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_reset_zone(uint64_t slba, uint32_t zone_idx, int all) "reset zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_offline_zone(uint64_t slba, uint32_t zone_idx, int all) "offline zone, slba=%"PRIu64", idx=%"PRIu32", all=%"PRIi32""
|
|
pci_nvme_set_descriptor_extension(uint64_t slba, uint32_t zone_idx) "set zone descriptor extension, slba=%"PRIu64", idx=%"PRIu32""
|
|
pci_nvme_clear_ns_close(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Closed state"
|
|
pci_nvme_clear_ns_reset(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Empty state"
|
|
|
|
# nvme traces for error conditions
|
|
pci_nvme_err_mdts(uint16_t cid, size_t len) "cid %"PRIu16" len %zu"
|
|
pci_nvme_err_req_status(uint16_t cid, uint32_t nsid, uint16_t status, uint8_t opc) "cid %"PRIu16" nsid %"PRIu32" status 0x%"PRIx16" opc 0x%"PRIx8""
|
|
pci_nvme_err_addr_read(uint64_t addr) "addr 0x%"PRIx64""
|
|
pci_nvme_err_addr_write(uint64_t addr) "addr 0x%"PRIx64""
|
|
pci_nvme_err_cfs(void) "controller fatal status"
|
|
pci_nvme_err_aio(uint16_t cid, const char *errname, uint16_t status) "cid %"PRIu16" err '%s' status 0x%"PRIx16""
|
|
pci_nvme_err_invalid_sgld(uint16_t cid, uint8_t typ) "cid %"PRIu16" type 0x%"PRIx8""
|
|
pci_nvme_err_invalid_num_sgld(uint16_t cid, uint8_t typ) "cid %"PRIu16" type 0x%"PRIx8""
|
|
pci_nvme_err_invalid_sgl_excess_length(uint16_t cid) "cid %"PRIu16""
|
|
pci_nvme_err_invalid_dma(void) "PRP/SGL is too small for transfer size"
|
|
pci_nvme_err_invalid_prplist_ent(uint64_t prplist) "PRP list entry is not page aligned: 0x%"PRIx64""
|
|
pci_nvme_err_invalid_prp2_align(uint64_t prp2) "PRP2 is not page aligned: 0x%"PRIx64""
|
|
pci_nvme_err_invalid_opc(uint8_t opc) "invalid opcode 0x%"PRIx8""
|
|
pci_nvme_err_invalid_admin_opc(uint8_t opc) "invalid admin opcode 0x%"PRIx8""
|
|
pci_nvme_err_invalid_lba_range(uint64_t start, uint64_t len, uint64_t limit) "Invalid LBA start=%"PRIu64" len=%"PRIu64" limit=%"PRIu64""
|
|
pci_nvme_err_invalid_log_page_offset(uint64_t ofs, uint64_t size) "must be <= %"PRIu64", got %"PRIu64""
|
|
pci_nvme_err_unaligned_zone_cmd(uint8_t action, uint64_t slba, uint64_t zslba) "unaligned zone op 0x%"PRIx32", got slba=%"PRIu64", zslba=%"PRIu64""
|
|
pci_nvme_err_invalid_zone_state_transition(uint8_t action, uint64_t slba, uint8_t attrs) "action=0x%"PRIx8", slba=%"PRIu64", attrs=0x%"PRIx32""
|
|
pci_nvme_err_write_not_at_wp(uint64_t slba, uint64_t zone, uint64_t wp) "writing at slba=%"PRIu64", zone=%"PRIu64", but wp=%"PRIu64""
|
|
pci_nvme_err_append_not_at_start(uint64_t slba, uint64_t zone) "appending at slba=%"PRIu64", but zone=%"PRIu64""
|
|
pci_nvme_err_zone_write_not_ok(uint64_t slba, uint32_t nlb, uint16_t status) "slba=%"PRIu64", nlb=%"PRIu32", status=0x%"PRIx16""
|
|
pci_nvme_err_zone_read_not_ok(uint64_t slba, uint32_t nlb, uint16_t status) "slba=%"PRIu64", nlb=%"PRIu32", status=0x%"PRIx16""
|
|
pci_nvme_err_append_too_large(uint64_t slba, uint32_t nlb, uint8_t zasl) "slba=%"PRIu64", nlb=%"PRIu32", zasl=%"PRIu8""
|
|
pci_nvme_err_insuff_active_res(uint32_t max_active) "max_active=%"PRIu32" zone limit exceeded"
|
|
pci_nvme_err_insuff_open_res(uint32_t max_open) "max_open=%"PRIu32" zone limit exceeded"
|
|
pci_nvme_err_invalid_iocsci(uint32_t idx) "unsupported command set combination index %"PRIu32""
|
|
pci_nvme_err_invalid_del_sq(uint16_t qid) "invalid submission queue deletion, sid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_cqid(uint16_t cqid) "failed creating submission queue, invalid cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_sqid(uint16_t sqid) "failed creating submission queue, invalid sqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_size(uint16_t qsize) "failed creating submission queue, invalid qsize=%"PRIu16""
|
|
pci_nvme_err_invalid_create_sq_addr(uint64_t addr) "failed creating submission queue, addr=0x%"PRIx64""
|
|
pci_nvme_err_invalid_create_sq_qflags(uint16_t qflags) "failed creating submission queue, qflags=%"PRIu16""
|
|
pci_nvme_err_invalid_del_cq_cqid(uint16_t cqid) "failed deleting completion queue, cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_del_cq_notempty(uint16_t cqid) "failed deleting completion queue, it is not empty, cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_cqid(uint16_t cqid) "failed creating completion queue, cqid=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_size(uint16_t size) "failed creating completion queue, size=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_addr(uint64_t addr) "failed creating completion queue, addr=0x%"PRIx64""
|
|
pci_nvme_err_invalid_create_cq_vector(uint16_t vector) "failed creating completion queue, vector=%"PRIu16""
|
|
pci_nvme_err_invalid_create_cq_qflags(uint16_t qflags) "failed creating completion queue, qflags=%"PRIu16""
|
|
pci_nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx16""
|
|
pci_nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32""
|
|
pci_nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32""
|
|
pci_nvme_err_invalid_log_page(uint16_t cid, uint16_t lid) "cid %"PRIu16" lid 0x%"PRIx16""
|
|
pci_nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues"
|
|
pci_nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues"
|
|
pci_nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
|
|
pci_nvme_err_startfail_nbaracq(void) "nvme_start_ctrl failed because the admin completion queue address is null"
|
|
pci_nvme_err_startfail_asq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin submission queue address is misaligned: 0x%"PRIx64""
|
|
pci_nvme_err_startfail_acq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin completion queue address is misaligned: 0x%"PRIx64""
|
|
pci_nvme_err_startfail_page_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too small: log2size=%u, min=%u"
|
|
pci_nvme_err_startfail_page_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too large: log2size=%u, max=%u"
|
|
pci_nvme_err_startfail_cqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too small: log2size=%u, min=%u"
|
|
pci_nvme_err_startfail_cqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too large: log2size=%u, max=%u"
|
|
pci_nvme_err_startfail_sqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too small: log2size=%u, min=%u"
|
|
pci_nvme_err_startfail_sqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too large: log2size=%u, max=%u"
|
|
pci_nvme_err_startfail_css(uint8_t css) "nvme_start_ctrl failed because invalid command set selected:%u"
|
|
pci_nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the admin submission queue size is zero"
|
|
pci_nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero"
|
|
pci_nvme_err_startfail_zasl_too_small(uint32_t zasl, uint32_t pagesz) "nvme_start_ctrl failed because zone append size limit %"PRIu32" is too small, needs to be >= %"PRIu32""
|
|
pci_nvme_err_startfail(void) "setting controller enable bit failed"
|
|
pci_nvme_err_invalid_mgmt_action(uint8_t action) "action=0x%"PRIx8""
|
|
|
|
# Traces for undefined behavior
|
|
pci_nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64""
|
|
pci_nvme_ub_mmiowr_toosmall(uint64_t offset, unsigned size) "MMIO write smaller than 32 bits, offset=0x%"PRIx64", size=%u"
|
|
pci_nvme_ub_mmiowr_intmask_with_msix(void) "undefined access to interrupt mask set when MSI-X is enabled"
|
|
pci_nvme_ub_mmiowr_ro_csts(void) "attempted to set a read only bit of controller status"
|
|
pci_nvme_ub_mmiowr_ssreset_w1c_unsupported(void) "attempted to W1C CSTS.NSSRO but CAP.NSSRS is zero (not supported)"
|
|
pci_nvme_ub_mmiowr_ssreset_unsupported(void) "attempted NVM subsystem reset but CAP.NSSRS is zero (not supported)"
|
|
pci_nvme_ub_mmiowr_cmbloc_reserved(void) "invalid write to reserved CMBLOC when CMBSZ is zero, ignored"
|
|
pci_nvme_ub_mmiowr_cmbsz_readonly(void) "invalid write to read only CMBSZ, ignored"
|
|
pci_nvme_ub_mmiowr_pmrcap_readonly(void) "invalid write to read only PMRCAP, ignored"
|
|
pci_nvme_ub_mmiowr_pmrsts_readonly(void) "invalid write to read only PMRSTS, ignored"
|
|
pci_nvme_ub_mmiowr_pmrebs_readonly(void) "invalid write to read only PMREBS, ignored"
|
|
pci_nvme_ub_mmiowr_pmrswtp_readonly(void) "invalid write to read only PMRSWTP, ignored"
|
|
pci_nvme_ub_mmiowr_invalid(uint64_t offset, uint64_t data) "invalid MMIO write, offset=0x%"PRIx64", data=0x%"PRIx64""
|
|
pci_nvme_ub_mmiord_misaligned32(uint64_t offset) "MMIO read not 32-bit aligned, offset=0x%"PRIx64""
|
|
pci_nvme_ub_mmiord_toosmall(uint64_t offset) "MMIO read smaller than 32-bits, offset=0x%"PRIx64""
|
|
pci_nvme_ub_mmiord_invalid_ofs(uint64_t offset) "MMIO read beyond last register, offset=0x%"PRIx64", returning 0"
|
|
pci_nvme_ub_db_wr_misaligned(uint64_t offset) "doorbell write not 32-bit aligned, offset=0x%"PRIx64", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_cq(uint32_t qid) "completion queue doorbell write for nonexistent queue, cqid=%"PRIu32", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_cqhead(uint32_t qid, uint16_t new_head) "completion queue doorbell write value beyond queue size, cqid=%"PRIu32", new_head=%"PRIu16", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_sq(uint32_t qid) "submission queue doorbell write for nonexistent queue, sqid=%"PRIu32", ignoring"
|
|
pci_nvme_ub_db_wr_invalid_sqtail(uint32_t qid, uint16_t new_tail) "submission queue doorbell write value beyond queue size, sqid=%"PRIu32", new_head=%"PRIu16", ignoring"
|
|
pci_nvme_ub_unknown_css_value(void) "unknown value in cc.css field"
|
|
|
|
# xen-block.c
|
|
xen_block_realize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_connect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_disconnect(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_unrealize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
|
|
xen_block_size(const char *type, uint32_t disk, uint32_t partition, int64_t sectors) "%s d%up%u %"PRIi64
|
|
xen_disk_realize(void) ""
|
|
xen_disk_unrealize(void) ""
|
|
xen_cdrom_realize(void) ""
|
|
xen_cdrom_unrealize(void) ""
|
|
xen_block_blockdev_add(char *str) "%s"
|
|
xen_block_blockdev_del(const char *node_name) "%s"
|
|
xen_block_device_create(unsigned int number) "%u"
|
|
xen_block_device_destroy(unsigned int number) "%u"
|
|
|
|
# m25p80.c
|
|
m25p80_flash_erase(void *s, int offset, uint32_t len) "[%p] offset = 0x%"PRIx32", len = %u"
|
|
m25p80_programming_zero_to_one(void *s, uint32_t addr, uint8_t prev, uint8_t data) "[%p] programming zero to one! addr=0x%"PRIx32" 0x%"PRIx8" -> 0x%"PRIx8
|
|
m25p80_reset_done(void *s) "[%p] Reset done."
|
|
m25p80_command_decoded(void *s, uint32_t cmd) "[%p] new command:0x%"PRIx32
|
|
m25p80_complete_collecting(void *s, uint32_t cmd, int n, uint8_t ear, uint32_t cur_addr) "[%p] decode cmd: 0x%"PRIx32" len %d ear 0x%"PRIx8" addr 0x%"PRIx32
|
|
m25p80_populated_jedec(void *s) "[%p] populated jedec code"
|
|
m25p80_chip_erase(void *s) "[%p] chip erase"
|
|
m25p80_select(void *s, const char *what) "[%p] %sselect"
|
|
m25p80_page_program(void *s, uint32_t addr, uint8_t tx) "[%p] page program cur_addr=0x%"PRIx32" data=0x%"PRIx8
|
|
m25p80_transfer(void *s, uint8_t state, uint32_t len, uint8_t needed, uint32_t pos, uint32_t cur_addr, uint8_t t) "[%p] Transfer state 0x%"PRIx8" len 0x%"PRIx32" needed 0x%"PRIx8" pos 0x%"PRIx32" addr 0x%"PRIx32" tx 0x%"PRIx8
|
|
m25p80_read_byte(void *s, uint32_t addr, uint8_t v) "[%p] Read byte 0x%"PRIx32"=0x%"PRIx8
|
|
m25p80_read_data(void *s, uint32_t pos, uint8_t v) "[%p] Read data 0x%"PRIx32"=0x%"PRIx8
|
|
m25p80_binding(void *s) "[%p] Binding to IF_MTD drive"
|
|
m25p80_binding_no_bdrv(void *s) "[%p] No BDRV - binding to RAM"
|