OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
9a13565d52
qemu-e2k/hw/sd/sdhci.h
Kevin O'Connor 224d10ff5a sdhci: Support SDHCI devices on PCI 
Support for PCI devices following the "SD Host Controller Simplified
Specification Version 2.00" spec.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 17:34:44 +01:00

296 lines
12 KiB
C
Raw Blame History

/*
* SD Association Host Standard Specification v2.0 controller emulation
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* Mitsyanko Igor <i.mitsyanko@samsung.com>
* Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
*
* Based on MMC controller for Samsung S5PC1xx-based board emulation
* by Alexey Merkulov and Vladimir Monakhov.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef SDHCI_H
#define SDHCI_H
#include "qemu-common.h"
#include "hw/pci/pci.h"
#include "hw/sysbus.h"
#include "hw/sd.h"
/* R/W SDMA System Address register 0x0 */
#define SDHC_SYSAD 0x00
/* R/W Host DMA Buffer Boundary and Transfer Block Size Register 0x0 */
#define SDHC_BLKSIZE 0x04
/* R/W Blocks count for current transfer 0x0 */
#define SDHC_BLKCNT 0x06
/* R/W Command Argument Register 0x0 */
#define SDHC_ARGUMENT 0x08
/* R/W Transfer Mode Setting Register 0x0 */
#define SDHC_TRNMOD 0x0C
#define SDHC_TRNS_DMA 0x0001
#define SDHC_TRNS_BLK_CNT_EN 0x0002
#define SDHC_TRNS_ACMD12 0x0004
#define SDHC_TRNS_READ 0x0010
#define SDHC_TRNS_MULTI 0x0020
/* R/W Command Register 0x0 */
#define SDHC_CMDREG 0x0E
#define SDHC_CMD_RSP_WITH_BUSY (3 << 0)
#define SDHC_CMD_DATA_PRESENT (1 << 5)
#define SDHC_CMD_SUSPEND (1 << 6)
#define SDHC_CMD_RESUME (1 << 7)
#define SDHC_CMD_ABORT ((1 << 6)|(1 << 7))
#define SDHC_CMD_TYPE_MASK ((1 << 6)|(1 << 7))
#define SDHC_COMMAND_TYPE(x) ((x) & SDHC_CMD_TYPE_MASK)
/* ROC Response Register 0 0x0 */
#define SDHC_RSPREG0 0x10
/* ROC Response Register 1 0x0 */
#define SDHC_RSPREG1 0x14
/* ROC Response Register 2 0x0 */
#define SDHC_RSPREG2 0x18
/* ROC Response Register 3 0x0 */
#define SDHC_RSPREG3 0x1C
/* R/W Buffer Data Register 0x0 */
#define SDHC_BDATA 0x20
/* R/ROC Present State Register 0x000A0000 */
#define SDHC_PRNSTS 0x24
#define SDHC_CMD_INHIBIT 0x00000001
#define SDHC_DATA_INHIBIT 0x00000002
#define SDHC_DAT_LINE_ACTIVE 0x00000004
#define SDHC_DOING_WRITE 0x00000100
#define SDHC_DOING_READ 0x00000200
#define SDHC_SPACE_AVAILABLE 0x00000400
#define SDHC_DATA_AVAILABLE 0x00000800
#define SDHC_CARD_PRESENT 0x00010000
#define SDHC_CARD_DETECT 0x00040000
#define SDHC_WRITE_PROTECT 0x00080000
#define TRANSFERRING_DATA(x) \
((x) & (SDHC_DOING_READ | SDHC_DOING_WRITE))
/* R/W Host control Register 0x0 */
#define SDHC_HOSTCTL 0x28
#define SDHC_CTRL_DMA_CHECK_MASK 0x18
#define SDHC_CTRL_SDMA 0x00
#define SDHC_CTRL_ADMA1_32 0x08
#define SDHC_CTRL_ADMA2_32 0x10
#define SDHC_CTRL_ADMA2_64 0x18
#define SDHC_DMA_TYPE(x) ((x) & SDHC_CTRL_DMA_CHECK_MASK)
/* R/W Power Control Register 0x0 */
#define SDHC_PWRCON 0x29
#define SDHC_POWER_ON (1 << 0)
/* R/W Block Gap Control Register 0x0 */
#define SDHC_BLKGAP 0x2A
#define SDHC_STOP_AT_GAP_REQ 0x01
#define SDHC_CONTINUE_REQ 0x02
/* R/W WakeUp Control Register 0x0 */
#define SDHC_WAKCON 0x2B
#define SDHC_WKUP_ON_INS (1 << 1)
#define SDHC_WKUP_ON_RMV (1 << 2)
/* CLKCON */
#define SDHC_CLKCON 0x2C
#define SDHC_CLOCK_INT_STABLE 0x0002
#define SDHC_CLOCK_INT_EN 0x0001
#define SDHC_CLOCK_SDCLK_EN (1 << 2)
#define SDHC_CLOCK_CHK_MASK 0x0007
#define SDHC_CLOCK_IS_ON(x) \
(((x) & SDHC_CLOCK_CHK_MASK) == SDHC_CLOCK_CHK_MASK)
/* R/W Timeout Control Register 0x0 */
#define SDHC_TIMEOUTCON 0x2E
/* R/W Software Reset Register 0x0 */
#define SDHC_SWRST 0x2F
#define SDHC_RESET_ALL 0x01
#define SDHC_RESET_CMD 0x02
#define SDHC_RESET_DATA 0x04
/* ROC/RW1C Normal Interrupt Status Register 0x0 */
#define SDHC_NORINTSTS 0x30
#define SDHC_NIS_ERR 0x8000
#define SDHC_NIS_CMDCMP 0x0001
#define SDHC_NIS_TRSCMP 0x0002
#define SDHC_NIS_BLKGAP 0x0004
#define SDHC_NIS_DMA 0x0008
#define SDHC_NIS_WBUFRDY 0x0010
#define SDHC_NIS_RBUFRDY 0x0020
#define SDHC_NIS_INSERT 0x0040
#define SDHC_NIS_REMOVE 0x0080
#define SDHC_NIS_CARDINT 0x0100
/* ROC/RW1C Error Interrupt Status Register 0x0 */
#define SDHC_ERRINTSTS 0x32
#define SDHC_EIS_CMDTIMEOUT 0x0001
#define SDHC_EIS_BLKGAP 0x0004
#define SDHC_EIS_CMDIDX 0x0008
#define SDHC_EIS_CMD12ERR 0x0100
#define SDHC_EIS_ADMAERR 0x0200
/* R/W Normal Interrupt Status Enable Register 0x0 */
#define SDHC_NORINTSTSEN 0x34
#define SDHC_NISEN_CMDCMP 0x0001
#define SDHC_NISEN_TRSCMP 0x0002
#define SDHC_NISEN_DMA 0x0008
#define SDHC_NISEN_WBUFRDY 0x0010
#define SDHC_NISEN_RBUFRDY 0x0020
#define SDHC_NISEN_INSERT 0x0040
#define SDHC_NISEN_REMOVE 0x0080
#define SDHC_NISEN_CARDINT 0x0100
/* R/W Error Interrupt Status Enable Register 0x0 */
#define SDHC_ERRINTSTSEN 0x36
#define SDHC_EISEN_CMDTIMEOUT 0x0001
#define SDHC_EISEN_BLKGAP 0x0004
#define SDHC_EISEN_CMDIDX 0x0008
#define SDHC_EISEN_ADMAERR 0x0200
/* R/W Normal Interrupt Signal Enable Register 0x0 */
#define SDHC_NORINTSIGEN 0x38
#define SDHC_NORINTSIG_INSERT (1 << 6)
#define SDHC_NORINTSIG_REMOVE (1 << 7)
/* R/W Error Interrupt Signal Enable Register 0x0 */
#define SDHC_ERRINTSIGEN 0x3A
/* ROC Auto CMD12 error status register 0x0 */
#define SDHC_ACMD12ERRSTS 0x3C
/* HWInit Capabilities Register 0x05E80080 */
#define SDHC_CAPAREG 0x40
#define SDHC_CAN_DO_DMA 0x00400000
#define SDHC_CAN_DO_ADMA2 0x00080000
#define SDHC_CAN_DO_ADMA1 0x00100000
#define SDHC_64_BIT_BUS_SUPPORT (1 << 28)
#define SDHC_CAPAB_BLOCKSIZE(x) (((x) >> 16) & 0x3)
/* HWInit Maximum Current Capabilities Register 0x0 */
#define SDHC_MAXCURR 0x48
/* W Force Event Auto CMD12 Error Interrupt Register 0x0000 */
#define SDHC_FEAER 0x50
/* W Force Event Error Interrupt Register Error Interrupt 0x0000 */
#define SDHC_FEERR 0x52
/* R/W ADMA Error Status Register 0x00 */
#define SDHC_ADMAERR 0x54
#define SDHC_ADMAERR_LENGTH_MISMATCH (1 << 2)
#define SDHC_ADMAERR_STATE_ST_STOP (0 << 0)
#define SDHC_ADMAERR_STATE_ST_FDS (1 << 0)
#define SDHC_ADMAERR_STATE_ST_TFR (3 << 0)
#define SDHC_ADMAERR_STATE_MASK (3 << 0)
/* R/W ADMA System Address Register 0x00 */
#define SDHC_ADMASYSADDR 0x58
#define SDHC_ADMA_ATTR_SET_LEN (1 << 4)
#define SDHC_ADMA_ATTR_ACT_TRAN (1 << 5)
#define SDHC_ADMA_ATTR_ACT_LINK (3 << 4)
#define SDHC_ADMA_ATTR_INT (1 << 2)
#define SDHC_ADMA_ATTR_END (1 << 1)
#define SDHC_ADMA_ATTR_VALID (1 << 0)
#define SDHC_ADMA_ATTR_ACT_MASK ((1 << 4)|(1 << 5))
/* Slot interrupt status */
#define SDHC_SLOT_INT_STATUS 0xFC
/* HWInit Host Controller Version Register 0x0401 */
#define SDHC_HCVER 0xFE
#define SD_HOST_SPECv2_VERS 0x2401
#define SDHC_REGISTERS_MAP_SIZE 0x100
#define SDHC_INSERTION_DELAY (get_ticks_per_sec())
#define SDHC_TRANSFER_DELAY 100
#define SDHC_ADMA_DESCS_PER_DELAY 5
#define SDHC_CMD_RESPONSE (3 << 0)
enum {
sdhc_not_stopped = 0, /* normal SDHC state */
sdhc_gap_read = 1, /* SDHC stopped at block gap during read operation */
sdhc_gap_write = 2 /* SDHC stopped at block gap during write operation */
};
/* SD/MMC host controller state */
typedef struct SDHCIState {
union {
PCIDevice pcidev;
SysBusDevice busdev;
};
SDState *card;
MemoryRegion iomem;
QEMUTimer *insert_timer; /* timer for 'changing' sd card. */
QEMUTimer *transfer_timer;
qemu_irq eject_cb;
qemu_irq ro_cb;
qemu_irq irq;
uint32_t sdmasysad; /* SDMA System Address register */
uint16_t blksize; /* Host DMA Buff Boundary and Transfer BlkSize Reg */
uint16_t blkcnt; /* Blocks count for current transfer */
uint32_t argument; /* Command Argument Register */
uint16_t trnmod; /* Transfer Mode Setting Register */
uint16_t cmdreg; /* Command Register */
uint32_t rspreg[4]; /* Response Registers 0-3 */
uint32_t prnsts; /* Present State Register */
uint8_t hostctl; /* Host Control Register */
uint8_t pwrcon; /* Power control Register */
uint8_t blkgap; /* Block Gap Control Register */
uint8_t wakcon; /* WakeUp Control Register */
uint16_t clkcon; /* Clock control Register */
uint8_t timeoutcon; /* Timeout Control Register */
uint8_t admaerr; /* ADMA Error Status Register */
uint16_t norintsts; /* Normal Interrupt Status Register */
uint16_t errintsts; /* Error Interrupt Status Register */
uint16_t norintstsen; /* Normal Interrupt Status Enable Register */
uint16_t errintstsen; /* Error Interrupt Status Enable Register */
uint16_t norintsigen; /* Normal Interrupt Signal Enable Register */
uint16_t errintsigen; /* Error Interrupt Signal Enable Register */
uint16_t acmd12errsts; /* Auto CMD12 error status register */
uint64_t admasysaddr; /* ADMA System Address Register */
uint32_t capareg; /* Capabilities Register */
uint32_t maxcurr; /* Maximum Current Capabilities Register */
uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */
uint32_t buf_maxsz;
uint16_t data_count; /* current element in FIFO buffer */
uint8_t stopped_state;/* Current SDHC state */
/* Buffer Data Port Register - virtual access point to R and W buffers */
/* Software Reset Register - always reads as 0 */
/* Force Event Auto CMD12 Error Interrupt Reg - write only */
/* Force Event Error Interrupt Register- write only */
/* RO Host Controller Version Register always reads as 0x2401 */
} SDHCIState;
extern const VMStateDescription sdhci_vmstate;
#define TYPE_PCI_SDHCI "sdhci-pci"
#define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI)
#define TYPE_SYSBUS_SDHCI "generic-sdhci"
#define SYSBUS_SDHCI(obj) \
OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI)
#endif /* SDHCI_H */
Reference in New Issue View Git Blame Copy Permalink