OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
9e8dd45164
qemu-e2k/hw/usb-hub.c
Gerd Hoffmann 6c2385270b usb-hub: remove unused descriptor arrays 
Somehow they where left over when converting the hub
to the new usb descriptor infrastructure ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08 11:26:10 +02:00

550 lines
15 KiB
C
Raw Blame History

/*
* QEMU USB HUB emulation
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu-common.h"
#include "usb.h"
#include "usb-desc.h"
//#define DEBUG
#define NUM_PORTS 8
typedef struct USBHubPort {
USBPort port;
uint16_t wPortStatus;
uint16_t wPortChange;
} USBHubPort;
typedef struct USBHubState {
USBDevice dev;
USBHubPort ports[NUM_PORTS];
} USBHubState;
#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
#define PORT_STAT_CONNECTION 0x0001
#define PORT_STAT_ENABLE 0x0002
#define PORT_STAT_SUSPEND 0x0004
#define PORT_STAT_OVERCURRENT 0x0008
#define PORT_STAT_RESET 0x0010
#define PORT_STAT_POWER 0x0100
#define PORT_STAT_LOW_SPEED 0x0200
#define PORT_STAT_HIGH_SPEED 0x0400
#define PORT_STAT_TEST 0x0800
#define PORT_STAT_INDICATOR 0x1000
#define PORT_STAT_C_CONNECTION 0x0001
#define PORT_STAT_C_ENABLE 0x0002
#define PORT_STAT_C_SUSPEND 0x0004
#define PORT_STAT_C_OVERCURRENT 0x0008
#define PORT_STAT_C_RESET 0x0010
#define PORT_CONNECTION 0
#define PORT_ENABLE 1
#define PORT_SUSPEND 2
#define PORT_OVERCURRENT 3
#define PORT_RESET 4
#define PORT_POWER 8
#define PORT_LOWSPEED 9
#define PORT_HIGHSPEED 10
#define PORT_C_CONNECTION 16
#define PORT_C_ENABLE 17
#define PORT_C_SUSPEND 18
#define PORT_C_OVERCURRENT 19
#define PORT_C_RESET 20
#define PORT_TEST 21
#define PORT_INDICATOR 22
/* same as Linux kernel root hubs */
enum {
STR_MANUFACTURER = 1,
STR_PRODUCT,
STR_SERIALNUMBER,
};
static const USBDescStrings desc_strings = {
[STR_MANUFACTURER] = "QEMU " QEMU_VERSION,
[STR_PRODUCT] = "QEMU USB Hub",
[STR_SERIALNUMBER] = "314159",
};
static const USBDescIface desc_iface_hub = {
.bInterfaceNumber = 0,
.bNumEndpoints = 1,
.bInterfaceClass = USB_CLASS_HUB,
.eps = (USBDescEndpoint[]) {
{
.bEndpointAddress = USB_DIR_IN | 0x01,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = 1 + (NUM_PORTS + 7) / 8,
.bInterval = 0xff,
},
}
};
static const USBDescDevice desc_device_hub = {
.bcdUSB = 0x0110,
.bDeviceClass = USB_CLASS_HUB,
.bMaxPacketSize0 = 8,
.bNumConfigurations = 1,
.confs = (USBDescConfig[]) {
{
.bNumInterfaces = 1,
.bConfigurationValue = 1,
.bmAttributes = 0xe0,
.nif = 1,
.ifs = &desc_iface_hub,
},
},
};
static const USBDesc desc_hub = {
.id = {
.idVendor = 0,
.idProduct = 0,
.bcdDevice = 0x0101,
.iManufacturer = STR_MANUFACTURER,
.iProduct = STR_PRODUCT,
.iSerialNumber = STR_SERIALNUMBER,
},
.full = &desc_device_hub,
.str = desc_strings,
};
static const uint8_t qemu_hub_hub_descriptor[] =
{
0x00, /* u8 bLength; patched in later */
0x29, /* u8 bDescriptorType; Hub-descriptor */
0x00, /* u8 bNbrPorts; (patched later) */
0x0a, /* u16 wHubCharacteristics; */
0x00, /* (per-port OC, no power switching) */
0x01, /* u8 bPwrOn2pwrGood; 2ms */
0x00 /* u8 bHubContrCurrent; 0 mA */
/* DeviceRemovable and PortPwrCtrlMask patched in later */
};
static void usb_hub_attach(USBPort *port1)
{
USBHubState *s = port1->opaque;
USBHubPort *port = &s->ports[port1->index];
port->wPortStatus |= PORT_STAT_CONNECTION;
port->wPortChange |= PORT_STAT_C_CONNECTION;
if (port->port.dev->speed == USB_SPEED_LOW) {
port->wPortStatus |= PORT_STAT_LOW_SPEED;
} else {
port->wPortStatus &= ~PORT_STAT_LOW_SPEED;
}
}
static void usb_hub_detach(USBPort *port1)
{
USBHubState *s = port1->opaque;
USBHubPort *port = &s->ports[port1->index];
/* Let upstream know the device on this port is gone */
s->dev.port->ops->child_detach(s->dev.port, port1->dev);
port->wPortStatus &= ~PORT_STAT_CONNECTION;
port->wPortChange |= PORT_STAT_C_CONNECTION;
if (port->wPortStatus & PORT_STAT_ENABLE) {
port->wPortStatus &= ~PORT_STAT_ENABLE;
port->wPortChange |= PORT_STAT_C_ENABLE;
}
}
static void usb_hub_child_detach(USBPort *port1, USBDevice *child)
{
USBHubState *s = port1->opaque;
/* Pass along upstream */
s->dev.port->ops->child_detach(s->dev.port, child);
}
static void usb_hub_wakeup(USBPort *port1)
{
USBHubState *s = port1->opaque;
USBHubPort *port = &s->ports[port1->index];
if (port->wPortStatus & PORT_STAT_SUSPEND) {
port->wPortChange |= PORT_STAT_C_SUSPEND;
usb_wakeup(&s->dev);
}
}
static void usb_hub_complete(USBPort *port, USBPacket *packet)
{
USBHubState *s = port->opaque;
/*
* Just pass it along upstream for now.
*
* If we ever inplement usb 2.0 split transactions this will
* become a little more complicated ...
*/
usb_packet_complete(&s->dev, packet);
}
static void usb_hub_handle_attach(USBDevice *dev)
{
USBHubState *s = DO_UPCAST(USBHubState, dev, dev);
int i;
for (i = 0; i < NUM_PORTS; i++) {
usb_port_location(&s->ports[i].port, dev->port, i+1);
}
}
static void usb_hub_handle_reset(USBDevice *dev)
{
/* XXX: do it */
}
static int usb_hub_handle_control(USBDevice *dev, USBPacket *p,
int request, int value, int index, int length, uint8_t *data)
{
USBHubState *s = (USBHubState *)dev;
int ret;
ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
if (ret >= 0) {
return ret;
}
switch(request) {
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
if (value == 0 && index != 0x81) { /* clear ep halt */
goto fail;
}
ret = 0;
break;
case DeviceRequest | USB_REQ_GET_INTERFACE:
data[0] = 0;
ret = 1;
break;
case DeviceOutRequest | USB_REQ_SET_INTERFACE:
ret = 0;
break;
/* usb specific requests */
case GetHubStatus:
data[0] = 0;
data[1] = 0;
data[2] = 0;
data[3] = 0;
ret = 4;
break;
case GetPortStatus:
{
unsigned int n = index - 1;
USBHubPort *port;
if (n >= NUM_PORTS) {
goto fail;
}
port = &s->ports[n];
data[0] = port->wPortStatus;
data[1] = port->wPortStatus >> 8;
data[2] = port->wPortChange;
data[3] = port->wPortChange >> 8;
ret = 4;
}
break;
case SetHubFeature:
case ClearHubFeature:
if (value == 0 || value == 1) {
} else {
goto fail;
}
ret = 0;
break;
case SetPortFeature:
{
unsigned int n = index - 1;
USBHubPort *port;
USBDevice *dev;
if (n >= NUM_PORTS) {
goto fail;
}
port = &s->ports[n];
dev = port->port.dev;
switch(value) {
case PORT_SUSPEND:
port->wPortStatus |= PORT_STAT_SUSPEND;
break;
case PORT_RESET:
if (dev) {
usb_send_msg(dev, USB_MSG_RESET);
port->wPortChange |= PORT_STAT_C_RESET;
/* set enable bit */
port->wPortStatus |= PORT_STAT_ENABLE;
}
break;
case PORT_POWER:
break;
default:
goto fail;
}
ret = 0;
}
break;
case ClearPortFeature:
{
unsigned int n = index - 1;
USBHubPort *port;
if (n >= NUM_PORTS) {
goto fail;
}
port = &s->ports[n];
switch(value) {
case PORT_ENABLE:
port->wPortStatus &= ~PORT_STAT_ENABLE;
break;
case PORT_C_ENABLE:
port->wPortChange &= ~PORT_STAT_C_ENABLE;
break;
case PORT_SUSPEND:
port->wPortStatus &= ~PORT_STAT_SUSPEND;
break;
case PORT_C_SUSPEND:
port->wPortChange &= ~PORT_STAT_C_SUSPEND;
break;
case PORT_C_CONNECTION:
port->wPortChange &= ~PORT_STAT_C_CONNECTION;
break;
case PORT_C_OVERCURRENT:
port->wPortChange &= ~PORT_STAT_C_OVERCURRENT;
break;
case PORT_C_RESET:
port->wPortChange &= ~PORT_STAT_C_RESET;
break;
default:
goto fail;
}
ret = 0;
}
break;
case GetHubDescriptor:
{
unsigned int n, limit, var_hub_size = 0;
memcpy(data, qemu_hub_hub_descriptor,
sizeof(qemu_hub_hub_descriptor));
data[2] = NUM_PORTS;
/* fill DeviceRemovable bits */
limit = ((NUM_PORTS + 1 + 7) / 8) + 7;
for (n = 7; n < limit; n++) {
data[n] = 0x00;
var_hub_size++;
}
/* fill PortPwrCtrlMask bits */
limit = limit + ((NUM_PORTS + 7) / 8);
for (;n < limit; n++) {
data[n] = 0xff;
var_hub_size++;
}
ret = sizeof(qemu_hub_hub_descriptor) + var_hub_size;
data[0] = ret;
break;
}
default:
fail:
ret = USB_RET_STALL;
break;
}
return ret;
}
static int usb_hub_handle_data(USBDevice *dev, USBPacket *p)
{
USBHubState *s = (USBHubState *)dev;
int ret;
switch(p->pid) {
case USB_TOKEN_IN:
if (p->devep == 1) {
USBHubPort *port;
unsigned int status;
int i, n;
n = (NUM_PORTS + 1 + 7) / 8;
if (p->len == 1) { /* FreeBSD workaround */
n = 1;
} else if (n > p->len) {
return USB_RET_BABBLE;
}
status = 0;
for(i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
if (port->wPortChange)
status |= (1 << (i + 1));
}
if (status != 0) {
for(i = 0; i < n; i++) {
p->data[i] = status >> (8 * i);
}
ret = n;
} else {
ret = USB_RET_NAK; /* usb11 11.13.1 */
}
} else {
goto fail;
}
break;
case USB_TOKEN_OUT:
default:
fail:
ret = USB_RET_STALL;
break;
}
return ret;
}
static int usb_hub_broadcast_packet(USBHubState *s, USBPacket *p)
{
USBHubPort *port;
USBDevice *dev;
int i, ret;
for(i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
dev = port->port.dev;
if (dev && (port->wPortStatus & PORT_STAT_ENABLE)) {
ret = usb_handle_packet(dev, p);
if (ret != USB_RET_NODEV) {
return ret;
}
}
}
return USB_RET_NODEV;
}
static int usb_hub_handle_packet(USBDevice *dev, USBPacket *p)
{
USBHubState *s = (USBHubState *)dev;
#if defined(DEBUG) && 0
printf("usb_hub: pid=0x%x\n", pid);
#endif
if (dev->state == USB_STATE_DEFAULT &&
dev->addr != 0 &&
p->devaddr != dev->addr &&
(p->pid == USB_TOKEN_SETUP ||
p->pid == USB_TOKEN_OUT ||
p->pid == USB_TOKEN_IN)) {
/* broadcast the packet to the devices */
return usb_hub_broadcast_packet(s, p);
}
return usb_generic_handle_packet(dev, p);
}
static void usb_hub_handle_destroy(USBDevice *dev)
{
USBHubState *s = (USBHubState *)dev;
int i;
for (i = 0; i < NUM_PORTS; i++) {
usb_unregister_port(usb_bus_from_device(dev),
&s->ports[i].port);
}
}
static USBPortOps usb_hub_port_ops = {
.attach = usb_hub_attach,
.detach = usb_hub_detach,
.child_detach = usb_hub_child_detach,
.wakeup = usb_hub_wakeup,
.complete = usb_hub_complete,
};
static int usb_hub_initfn(USBDevice *dev)
{
USBHubState *s = DO_UPCAST(USBHubState, dev, dev);
USBHubPort *port;
int i;
usb_desc_init(dev);
for (i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
usb_register_port(usb_bus_from_device(dev),
&port->port, s, i, &usb_hub_port_ops,
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
port->wPortStatus = PORT_STAT_POWER;
port->wPortChange = 0;
}
return 0;
}
static const VMStateDescription vmstate_usb_hub_port = {
.name = "usb-hub-port",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField []) {
VMSTATE_UINT16(wPortStatus, USBHubPort),
VMSTATE_UINT16(wPortChange, USBHubPort),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_usb_hub = {
.name = "usb-hub",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField []) {
VMSTATE_USB_DEVICE(dev, USBHubState),
VMSTATE_STRUCT_ARRAY(ports, USBHubState, NUM_PORTS, 0,
vmstate_usb_hub_port, USBHubPort),
VMSTATE_END_OF_LIST()
}
};
static struct USBDeviceInfo hub_info = {
.product_desc = "QEMU USB Hub",
.qdev.name = "usb-hub",
.qdev.fw_name = "hub",
.qdev.size = sizeof(USBHubState),
.qdev.vmsd = &vmstate_usb_hub,
.usb_desc = &desc_hub,
.init = usb_hub_initfn,
.handle_packet = usb_hub_handle_packet,
.handle_attach = usb_hub_handle_attach,
.handle_reset = usb_hub_handle_reset,
.handle_control = usb_hub_handle_control,
.handle_data = usb_hub_handle_data,
.handle_destroy = usb_hub_handle_destroy,
};
static void usb_hub_register_devices(void)
{
usb_qdev_register(&hub_info);
}
device_init(usb_hub_register_devices)
Reference in New Issue View Git Blame Copy Permalink