OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
a35c20961b
qemu-e2k/hw/arm/stm32f100_soc.c
Peter Maydell b5ff0c6183 hw/arm/stm32f100: Wire up sysclk and refclk 
Wire up the sysclk and refclk for the stm32f100 SoC.  This SoC always
runs the systick refclk at 1/8 the frequency of the main CPU clock,
so the board code only needs to provide a single sysclk clock.

Because there is only one board using this SoC, we convert the SoC
and the board together, rather than splitting it into "add clock to
SoC; connect clock in board; add error check in SoC code that clock
is wired up".

When the systick device starts honouring its clock inputs, this will
fix an emulation inaccuracy in the stm32vldiscovery board where the
systick reference clock was running at 1MHz rather than 3MHz.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210812093356.1946-12-peter.maydell@linaro.org
2021-09-01 11:08:19 +01:00

210 lines
8.2 KiB
C
Raw Blame History

/*
* STM32F100 SoC
*
* Copyright (c) 2021 Alexandre Iooss <erdnaxe@crans.org>
* Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "hw/arm/boot.h"
#include "exec/address-spaces.h"
#include "hw/arm/stm32f100_soc.h"
#include "hw/qdev-properties.h"
#include "hw/qdev-clock.h"
#include "hw/misc/unimp.h"
#include "sysemu/sysemu.h"
/* stm32f100_soc implementation is derived from stm32f205_soc */
static const uint32_t usart_addr[STM_NUM_USARTS] = { 0x40013800, 0x40004400,
0x40004800 };
static const uint32_t spi_addr[STM_NUM_SPIS] = { 0x40013000, 0x40003800 };
static const int usart_irq[STM_NUM_USARTS] = {37, 38, 39};
static const int spi_irq[STM_NUM_SPIS] = {35, 36};
static void stm32f100_soc_initfn(Object *obj)
{
STM32F100State *s = STM32F100_SOC(obj);
int i;
object_initialize_child(obj, "armv7m", &s->armv7m, TYPE_ARMV7M);
for (i = 0; i < STM_NUM_USARTS; i++) {
object_initialize_child(obj, "usart[*]", &s->usart[i],
TYPE_STM32F2XX_USART);
}
for (i = 0; i < STM_NUM_SPIS; i++) {
object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_STM32F2XX_SPI);
}
s->sysclk = qdev_init_clock_in(DEVICE(s), "sysclk", NULL, NULL, 0);
s->refclk = qdev_init_clock_in(DEVICE(s), "refclk", NULL, NULL, 0);
}
static void stm32f100_soc_realize(DeviceState *dev_soc, Error **errp)
{
STM32F100State *s = STM32F100_SOC(dev_soc);
DeviceState *dev, *armv7m;
SysBusDevice *busdev;
int i;
MemoryRegion *system_memory = get_system_memory();
/*
* We use s->refclk internally and only define it with qdev_init_clock_in()
* so it is correctly parented and not leaked on an init/deinit; it is not
* intended as an externally exposed clock.
*/
if (clock_has_source(s->refclk)) {
error_setg(errp, "refclk clock must not be wired up by the board code");
return;
}
if (!clock_has_source(s->sysclk)) {
error_setg(errp, "sysclk clock must be wired up by the board code");
return;
}
/*
* TODO: ideally we should model the SoC RCC and its ability to
* change the sysclk frequency and define different sysclk sources.
*/
/* The refclk always runs at frequency HCLK / 8 */
clock_set_mul_div(s->refclk, 8, 1);
clock_set_source(s->refclk, s->sysclk);
/*
* Init flash region
* Flash starts at 0x08000000 and then is aliased to boot memory at 0x0
*/
memory_region_init_rom(&s->flash, OBJECT(dev_soc), "STM32F100.flash",
FLASH_SIZE, &error_fatal);
memory_region_init_alias(&s->flash_alias, OBJECT(dev_soc),
"STM32F100.flash.alias", &s->flash, 0, FLASH_SIZE);
memory_region_add_subregion(system_memory, FLASH_BASE_ADDRESS, &s->flash);
memory_region_add_subregion(system_memory, 0, &s->flash_alias);
/* Init SRAM region */
memory_region_init_ram(&s->sram, NULL, "STM32F100.sram", SRAM_SIZE,
&error_fatal);
memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram);
/* Init ARMv7m */
armv7m = DEVICE(&s->armv7m);
qdev_prop_set_uint32(armv7m, "num-irq", 61);
qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
qdev_connect_clock_in(armv7m, "cpuclk", s->sysclk);
qdev_connect_clock_in(armv7m, "refclk", s->refclk);
object_property_set_link(OBJECT(&s->armv7m), "memory",
OBJECT(get_system_memory()), &error_abort);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) {
return;
}
/* Attach UART (uses USART registers) and USART controllers */
for (i = 0; i < STM_NUM_USARTS; i++) {
dev = DEVICE(&(s->usart[i]));
qdev_prop_set_chr(dev, "chardev", serial_hd(i));
if (!sysbus_realize(SYS_BUS_DEVICE(&s->usart[i]), errp)) {
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, usart_addr[i]);
sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i]));
}
/* SPI 1 and 2 */
for (i = 0; i < STM_NUM_SPIS; i++) {
dev = DEVICE(&(s->spi[i]));
if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, spi_addr[i]);
sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i]));
}
create_unimplemented_device("timer[2]", 0x40000000, 0x400);
create_unimplemented_device("timer[3]", 0x40000400, 0x400);
create_unimplemented_device("timer[4]", 0x40000800, 0x400);
create_unimplemented_device("timer[6]", 0x40001000, 0x400);
create_unimplemented_device("timer[7]", 0x40001400, 0x400);
create_unimplemented_device("RTC", 0x40002800, 0x400);
create_unimplemented_device("WWDG", 0x40002C00, 0x400);
create_unimplemented_device("IWDG", 0x40003000, 0x400);
create_unimplemented_device("I2C1", 0x40005400, 0x400);
create_unimplemented_device("I2C2", 0x40005800, 0x400);
create_unimplemented_device("BKP", 0x40006C00, 0x400);
create_unimplemented_device("PWR", 0x40007000, 0x400);
create_unimplemented_device("DAC", 0x40007400, 0x400);
create_unimplemented_device("CEC", 0x40007800, 0x400);
create_unimplemented_device("AFIO", 0x40010000, 0x400);
create_unimplemented_device("EXTI", 0x40010400, 0x400);
create_unimplemented_device("GPIOA", 0x40010800, 0x400);
create_unimplemented_device("GPIOB", 0x40010C00, 0x400);
create_unimplemented_device("GPIOC", 0x40011000, 0x400);
create_unimplemented_device("GPIOD", 0x40011400, 0x400);
create_unimplemented_device("GPIOE", 0x40011800, 0x400);
create_unimplemented_device("ADC1", 0x40012400, 0x400);
create_unimplemented_device("timer[1]", 0x40012C00, 0x400);
create_unimplemented_device("timer[15]", 0x40014000, 0x400);
create_unimplemented_device("timer[16]", 0x40014400, 0x400);
create_unimplemented_device("timer[17]", 0x40014800, 0x400);
create_unimplemented_device("DMA", 0x40020000, 0x400);
create_unimplemented_device("RCC", 0x40021000, 0x400);
create_unimplemented_device("Flash Int", 0x40022000, 0x400);
create_unimplemented_device("CRC", 0x40023000, 0x400);
}
static Property stm32f100_soc_properties[] = {
DEFINE_PROP_STRING("cpu-type", STM32F100State, cpu_type),
DEFINE_PROP_END_OF_LIST(),
};
static void stm32f100_soc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = stm32f100_soc_realize;
device_class_set_props(dc, stm32f100_soc_properties);
}
static const TypeInfo stm32f100_soc_info = {
.name = TYPE_STM32F100_SOC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(STM32F100State),
.instance_init = stm32f100_soc_initfn,
.class_init = stm32f100_soc_class_init,
};
static void stm32f100_soc_types(void)
{
type_register_static(&stm32f100_soc_info);
}
type_init(stm32f100_soc_types)
Reference in New Issue View Git Blame Copy Permalink