OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
a39fe10557
qemu-e2k/hw/misc/meson.build
Peter Delevoryas 55c57023b7 hw/misc/aspeed: Add PECI controller 
This introduces a really basic PECI controller that responses to
commands by always setting the response code to success and then raising
an interrupt to indicate the command is done. This helps avoid getting
hit with constant errors if the driver continuously attempts to send a
command and keeps timing out.

The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC.
They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support
PECI 4.0, which includes more read/write buffer registers from 0x80 to
0xFC to support 64-byte mode.

This patch doesn't attempt to handle that, or to create a different
version of the controller for the different generations, since it's only
implementing functionality that is common to all generations.

The basic sequence of events is that the firmware will read and write to
various registers and then trigger a command by setting the FIRE bit in
the command register (similar to the I2C controller).

Then the firmware waits for an interrupt from the PECI controller,
expecting the interrupt status register to be filled in with info on
what happened. If the command was transmitted and received successfully,
then response codes from the host CPU will be found in the data buffer
registers.

Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-12-me@pjd.dev>
[ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00

141 lines
6.2 KiB
Meson
Raw Blame History

softmmu_ss.add(when: 'CONFIG_APPLESMC', if_true: files('applesmc.c'))
softmmu_ss.add(when: 'CONFIG_EDU', if_true: files('edu.c'))
softmmu_ss.add(when: 'CONFIG_FW_CFG_DMA', if_true: files('vmcoreinfo.c'))
softmmu_ss.add(when: 'CONFIG_ISA_DEBUG', if_true: files('debugexit.c'))
softmmu_ss.add(when: 'CONFIG_ISA_TESTDEV', if_true: files('pc-testdev.c'))
softmmu_ss.add(when: 'CONFIG_PCA9552', if_true: files('pca9552.c'))
softmmu_ss.add(when: 'CONFIG_PCI_TESTDEV', if_true: files('pci-testdev.c'))
softmmu_ss.add(when: 'CONFIG_SGA', if_true: files('sga.c'))
softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c'))
softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c'))
softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c'))
softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c'))
# ARM devices
softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c'))
softmmu_ss.add(when: 'CONFIG_INTEGRATOR_DEBUG', if_true: files('arm_integrator_debug.c'))
softmmu_ss.add(when: 'CONFIG_A9SCU', if_true: files('a9scu.c'))
softmmu_ss.add(when: 'CONFIG_ARM11SCU', if_true: files('arm11scu.c'))
softmmu_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_ras.c'))
# Mac devices
softmmu_ss.add(when: 'CONFIG_MOS6522', if_true: files('mos6522.c'))
# virt devices
softmmu_ss.add(when: 'CONFIG_VIRT_CTRL', if_true: files('virt_ctrl.c'))
# RISC-V devices
softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_DMC', if_true: files('mchp_pfsoc_dmc.c'))
softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_IOSCB', if_true: files('mchp_pfsoc_ioscb.c'))
softmmu_ss.add(when: 'CONFIG_MCHP_PFSOC_SYSREG', if_true: files('mchp_pfsoc_sysreg.c'))
softmmu_ss.add(when: 'CONFIG_SIFIVE_TEST', if_true: files('sifive_test.c'))
softmmu_ss.add(when: 'CONFIG_SIFIVE_E_PRCI', if_true: files('sifive_e_prci.c'))
softmmu_ss.add(when: 'CONFIG_SIFIVE_U_OTP', if_true: files('sifive_u_otp.c'))
softmmu_ss.add(when: 'CONFIG_SIFIVE_U_PRCI', if_true: files('sifive_u_prci.c'))
subdir('macio')
softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c'))
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c'))
specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c'))
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c'))
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c'))
softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c'))
softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c'))
softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c'))
softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c'))
softmmu_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_pmu.c', 'exynos4210_clk.c', 'exynos4210_rng.c'))
softmmu_ss.add(when: 'CONFIG_IMX', if_true: files(
'imx25_ccm.c',
'imx31_ccm.c',
'imx6_ccm.c',
'imx6ul_ccm.c',
'imx7_ccm.c',
'imx7_gpr.c',
'imx7_snvs.c',
'imx_ccm.c',
'imx_rngc.c',
))
softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
'npcm7xx_clk.c',
'npcm7xx_gcr.c',
'npcm7xx_mft.c',
'npcm7xx_pwm.c',
'npcm7xx_rng.c',
))
softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
'omap_clk.c',
'omap_gpmc.c',
'omap_l4.c',
'omap_sdrc.c',
'omap_tap.c',
))
softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files(
'bcm2835_mbox.c',
'bcm2835_mphi.c',
'bcm2835_property.c',
'bcm2835_rng.c',
'bcm2835_thermal.c',
'bcm2835_cprman.c',
'bcm2835_powermgt.c',
))
softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c'))
softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c'))
specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c'))
specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-apu-ctrl.c'))
specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-crl.c'))
softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files(
'xlnx-versal-xramc.c',
'xlnx-versal-pmc-iou-slcr.c',
))
softmmu_ss.add(when: 'CONFIG_STM32F2XX_SYSCFG', if_true: files('stm32f2xx_syscfg.c'))
softmmu_ss.add(when: 'CONFIG_STM32F4XX_SYSCFG', if_true: files('stm32f4xx_syscfg.c'))
softmmu_ss.add(when: 'CONFIG_STM32F4XX_EXTI', if_true: files('stm32f4xx_exti.c'))
softmmu_ss.add(when: 'CONFIG_MPS2_FPGAIO', if_true: files('mps2-fpgaio.c'))
softmmu_ss.add(when: 'CONFIG_MPS2_SCC', if_true: files('mps2-scc.c'))
softmmu_ss.add(when: 'CONFIG_TZ_MPC', if_true: files('tz-mpc.c'))
softmmu_ss.add(when: 'CONFIG_TZ_MSC', if_true: files('tz-msc.c'))
softmmu_ss.add(when: 'CONFIG_TZ_PPC', if_true: files('tz-ppc.c'))
softmmu_ss.add(when: 'CONFIG_IOTKIT_SECCTL', if_true: files('iotkit-secctl.c'))
softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c'))
softmmu_ss.add(when: 'CONFIG_ARMSSE_CPU_PWRCTRL', if_true: files('armsse-cpu-pwrctrl.c'))
softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c'))
softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c'))
softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c'))
softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c'))
softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c'))
softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed_hace.c',
'aspeed_i3c.c',
'aspeed_lpc.c',
'aspeed_scu.c',
'aspeed_sbc.c',
'aspeed_sdmc.c',
'aspeed_xdma.c',
'aspeed_peci.c'))
softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c'))
softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_rng.c'))
softmmu_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_ahb_apb_pnp.c'))
specific_ss.add(when: 'CONFIG_AVR_POWER', if_true: files('avr_power.c'))
specific_ss.add(when: 'CONFIG_IMX', if_true: files('imx6_src.c'))
specific_ss.add(when: 'CONFIG_IOTKIT_SYSCTL', if_true: files('iotkit-sysctl.c'))
specific_ss.add(when: 'CONFIG_MAC_VIA', if_true: files('mac_via.c'))
specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_cmgcr.c', 'mips_cpc.c'))
specific_ss.add(when: 'CONFIG_MIPS_ITU', if_true: files('mips_itu.c'))
specific_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa_ec.c'))
# HPPA devices
softmmu_ss.add(when: 'CONFIG_LASI', if_true: files('lasi.c'))
Reference in New Issue View Git Blame Copy Permalink