qemu-e2k/hw/timer/milkymist-sysctl.c

343 lines
9.0 KiB
C

/*
* QEMU model of the Milkymist System Controller.
*
* Copyright (c) 2010-2012 Michael Walle <michael@walle.cc>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*
* Specification available at:
* http://www.milkymist.org/socdoc/sysctl.pdf
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/sysbus.h"
#include "sysemu/sysemu.h"
#include "trace.h"
#include "qemu/timer.h"
#include "hw/ptimer.h"
#include "qemu/error-report.h"
enum {
CTRL_ENABLE = (1<<0),
CTRL_AUTORESTART = (1<<1),
};
enum {
ICAP_READY = (1<<0),
};
enum {
R_GPIO_IN = 0,
R_GPIO_OUT,
R_GPIO_INTEN,
R_TIMER0_CONTROL = 4,
R_TIMER0_COMPARE,
R_TIMER0_COUNTER,
R_TIMER1_CONTROL = 8,
R_TIMER1_COMPARE,
R_TIMER1_COUNTER,
R_ICAP = 16,
R_DBG_SCRATCHPAD = 20,
R_DBG_WRITE_LOCK,
R_CLK_FREQUENCY = 29,
R_CAPABILITIES,
R_SYSTEM_ID,
R_MAX
};
#define TYPE_MILKYMIST_SYSCTL "milkymist-sysctl"
#define MILKYMIST_SYSCTL(obj) \
OBJECT_CHECK(MilkymistSysctlState, (obj), TYPE_MILKYMIST_SYSCTL)
struct MilkymistSysctlState {
SysBusDevice parent_obj;
MemoryRegion regs_region;
QEMUBH *bh0;
QEMUBH *bh1;
ptimer_state *ptimer0;
ptimer_state *ptimer1;
uint32_t freq_hz;
uint32_t capabilities;
uint32_t systemid;
uint32_t strappings;
uint32_t regs[R_MAX];
qemu_irq gpio_irq;
qemu_irq timer0_irq;
qemu_irq timer1_irq;
};
typedef struct MilkymistSysctlState MilkymistSysctlState;
static void sysctl_icap_write(MilkymistSysctlState *s, uint32_t value)
{
trace_milkymist_sysctl_icap_write(value);
switch (value & 0xffff) {
case 0x000e:
qemu_system_shutdown_request();
break;
}
}
static uint64_t sysctl_read(void *opaque, hwaddr addr,
unsigned size)
{
MilkymistSysctlState *s = opaque;
uint32_t r = 0;
addr >>= 2;
switch (addr) {
case R_TIMER0_COUNTER:
r = (uint32_t)ptimer_get_count(s->ptimer0);
/* milkymist timer counts up */
r = s->regs[R_TIMER0_COMPARE] - r;
break;
case R_TIMER1_COUNTER:
r = (uint32_t)ptimer_get_count(s->ptimer1);
/* milkymist timer counts up */
r = s->regs[R_TIMER1_COMPARE] - r;
break;
case R_GPIO_IN:
case R_GPIO_OUT:
case R_GPIO_INTEN:
case R_TIMER0_CONTROL:
case R_TIMER0_COMPARE:
case R_TIMER1_CONTROL:
case R_TIMER1_COMPARE:
case R_ICAP:
case R_DBG_SCRATCHPAD:
case R_DBG_WRITE_LOCK:
case R_CLK_FREQUENCY:
case R_CAPABILITIES:
case R_SYSTEM_ID:
r = s->regs[addr];
break;
default:
error_report("milkymist_sysctl: read access to unknown register 0x"
TARGET_FMT_plx, addr << 2);
break;
}
trace_milkymist_sysctl_memory_read(addr << 2, r);
return r;
}
static void sysctl_write(void *opaque, hwaddr addr, uint64_t value,
unsigned size)
{
MilkymistSysctlState *s = opaque;
trace_milkymist_sysctl_memory_write(addr, value);
addr >>= 2;
switch (addr) {
case R_GPIO_OUT:
case R_GPIO_INTEN:
case R_TIMER0_COUNTER:
case R_TIMER1_COUNTER:
case R_DBG_SCRATCHPAD:
s->regs[addr] = value;
break;
case R_TIMER0_COMPARE:
ptimer_set_limit(s->ptimer0, value, 0);
s->regs[addr] = value;
break;
case R_TIMER1_COMPARE:
ptimer_set_limit(s->ptimer1, value, 0);
s->regs[addr] = value;
break;
case R_TIMER0_CONTROL:
s->regs[addr] = value;
if (s->regs[R_TIMER0_CONTROL] & CTRL_ENABLE) {
trace_milkymist_sysctl_start_timer0();
ptimer_set_count(s->ptimer0,
s->regs[R_TIMER0_COMPARE] - s->regs[R_TIMER0_COUNTER]);
ptimer_run(s->ptimer0, 0);
} else {
trace_milkymist_sysctl_stop_timer0();
ptimer_stop(s->ptimer0);
}
break;
case R_TIMER1_CONTROL:
s->regs[addr] = value;
if (s->regs[R_TIMER1_CONTROL] & CTRL_ENABLE) {
trace_milkymist_sysctl_start_timer1();
ptimer_set_count(s->ptimer1,
s->regs[R_TIMER1_COMPARE] - s->regs[R_TIMER1_COUNTER]);
ptimer_run(s->ptimer1, 0);
} else {
trace_milkymist_sysctl_stop_timer1();
ptimer_stop(s->ptimer1);
}
break;
case R_ICAP:
sysctl_icap_write(s, value);
break;
case R_DBG_WRITE_LOCK:
s->regs[addr] = 1;
break;
case R_SYSTEM_ID:
qemu_system_reset_request();
break;
case R_GPIO_IN:
case R_CLK_FREQUENCY:
case R_CAPABILITIES:
error_report("milkymist_sysctl: write to read-only register 0x"
TARGET_FMT_plx, addr << 2);
break;
default:
error_report("milkymist_sysctl: write access to unknown register 0x"
TARGET_FMT_plx, addr << 2);
break;
}
}
static const MemoryRegionOps sysctl_mmio_ops = {
.read = sysctl_read,
.write = sysctl_write,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void timer0_hit(void *opaque)
{
MilkymistSysctlState *s = opaque;
if (!(s->regs[R_TIMER0_CONTROL] & CTRL_AUTORESTART)) {
s->regs[R_TIMER0_CONTROL] &= ~CTRL_ENABLE;
trace_milkymist_sysctl_stop_timer0();
ptimer_stop(s->ptimer0);
}
trace_milkymist_sysctl_pulse_irq_timer0();
qemu_irq_pulse(s->timer0_irq);
}
static void timer1_hit(void *opaque)
{
MilkymistSysctlState *s = opaque;
if (!(s->regs[R_TIMER1_CONTROL] & CTRL_AUTORESTART)) {
s->regs[R_TIMER1_CONTROL] &= ~CTRL_ENABLE;
trace_milkymist_sysctl_stop_timer1();
ptimer_stop(s->ptimer1);
}
trace_milkymist_sysctl_pulse_irq_timer1();
qemu_irq_pulse(s->timer1_irq);
}
static void milkymist_sysctl_reset(DeviceState *d)
{
MilkymistSysctlState *s = MILKYMIST_SYSCTL(d);
int i;
for (i = 0; i < R_MAX; i++) {
s->regs[i] = 0;
}
ptimer_stop(s->ptimer0);
ptimer_stop(s->ptimer1);
/* defaults */
s->regs[R_ICAP] = ICAP_READY;
s->regs[R_SYSTEM_ID] = s->systemid;
s->regs[R_CLK_FREQUENCY] = s->freq_hz;
s->regs[R_CAPABILITIES] = s->capabilities;
s->regs[R_GPIO_IN] = s->strappings;
}
static int milkymist_sysctl_init(SysBusDevice *dev)
{
MilkymistSysctlState *s = MILKYMIST_SYSCTL(dev);
sysbus_init_irq(dev, &s->gpio_irq);
sysbus_init_irq(dev, &s->timer0_irq);
sysbus_init_irq(dev, &s->timer1_irq);
s->bh0 = qemu_bh_new(timer0_hit, s);
s->bh1 = qemu_bh_new(timer1_hit, s);
s->ptimer0 = ptimer_init(s->bh0);
s->ptimer1 = ptimer_init(s->bh1);
ptimer_set_freq(s->ptimer0, s->freq_hz);
ptimer_set_freq(s->ptimer1, s->freq_hz);
memory_region_init_io(&s->regs_region, OBJECT(s), &sysctl_mmio_ops, s,
"milkymist-sysctl", R_MAX * 4);
sysbus_init_mmio(dev, &s->regs_region);
return 0;
}
static const VMStateDescription vmstate_milkymist_sysctl = {
.name = "milkymist-sysctl",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, MilkymistSysctlState, R_MAX),
VMSTATE_PTIMER(ptimer0, MilkymistSysctlState),
VMSTATE_PTIMER(ptimer1, MilkymistSysctlState),
VMSTATE_END_OF_LIST()
}
};
static Property milkymist_sysctl_properties[] = {
DEFINE_PROP_UINT32("frequency", MilkymistSysctlState,
freq_hz, 80000000),
DEFINE_PROP_UINT32("capabilities", MilkymistSysctlState,
capabilities, 0x00000000),
DEFINE_PROP_UINT32("systemid", MilkymistSysctlState,
systemid, 0x10014d31),
DEFINE_PROP_UINT32("gpio_strappings", MilkymistSysctlState,
strappings, 0x00000001),
DEFINE_PROP_END_OF_LIST(),
};
static void milkymist_sysctl_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = milkymist_sysctl_init;
dc->reset = milkymist_sysctl_reset;
dc->vmsd = &vmstate_milkymist_sysctl;
dc->props = milkymist_sysctl_properties;
}
static const TypeInfo milkymist_sysctl_info = {
.name = TYPE_MILKYMIST_SYSCTL,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(MilkymistSysctlState),
.class_init = milkymist_sysctl_class_init,
};
static void milkymist_sysctl_register_types(void)
{
type_register_static(&milkymist_sysctl_info);
}
type_init(milkymist_sysctl_register_types)