qemu-e2k/tests/ide-test.c
Michael Roth 22bfa16ed3 ide-test: fix failure for test_flush
bd07684aac added a test to ensure BSY
flag is set when a flush request is in flight. It does this by setting
a blkdebug breakpoint on flush_to_os before issuing a CMD_FLUSH_CACHE.
It then resumes CMD_FLUSH_CACHE operation and checks that BSY is unset.

The actual unsetting of BSY does not occur until ide_flush_cb gets
called in a bh, however, so in some cases this check will race with
the actual completion.

Fix this by polling the ide status register until BSY flag gets unset
before we do our final sanity checks. According to
f68ec8379e this is in line with how a guest
would determine whether or not the device is still busy.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-14 13:08:15 -05:00

507 lines
13 KiB
C

/*
* IDE test cases
*
* Copyright (c) 2013 Kevin Wolf <kwolf@redhat.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include <string.h>
#include <stdio.h>
#include <glib.h>
#include "libqtest.h"
#include "libqos/pci-pc.h"
#include "libqos/malloc-pc.h"
#include "qemu-common.h"
#include "hw/pci/pci_ids.h"
#include "hw/pci/pci_regs.h"
#define TEST_IMAGE_SIZE 64 * 1024 * 1024
#define IDE_PCI_DEV 1
#define IDE_PCI_FUNC 1
#define IDE_BASE 0x1f0
#define IDE_PRIMARY_IRQ 14
enum {
reg_data = 0x0,
reg_nsectors = 0x2,
reg_lba_low = 0x3,
reg_lba_middle = 0x4,
reg_lba_high = 0x5,
reg_device = 0x6,
reg_status = 0x7,
reg_command = 0x7,
};
enum {
BSY = 0x80,
DRDY = 0x40,
DF = 0x20,
DRQ = 0x08,
ERR = 0x01,
};
enum {
DEV = 0x10,
LBA = 0x40,
};
enum {
bmreg_cmd = 0x0,
bmreg_status = 0x2,
bmreg_prdt = 0x4,
};
enum {
CMD_READ_DMA = 0xc8,
CMD_WRITE_DMA = 0xca,
CMD_FLUSH_CACHE = 0xe7,
CMD_IDENTIFY = 0xec,
CMDF_ABORT = 0x100,
};
enum {
BM_CMD_START = 0x1,
BM_CMD_WRITE = 0x8, /* write = from device to memory */
};
enum {
BM_STS_ACTIVE = 0x1,
BM_STS_ERROR = 0x2,
BM_STS_INTR = 0x4,
};
enum {
PRDT_EOT = 0x80000000,
};
#define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask))
#define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
static QPCIBus *pcibus = NULL;
static QGuestAllocator *guest_malloc;
static char tmp_path[] = "/tmp/qtest.XXXXXX";
static void ide_test_start(const char *cmdline_fmt, ...)
{
va_list ap;
char *cmdline;
va_start(ap, cmdline_fmt);
cmdline = g_strdup_vprintf(cmdline_fmt, ap);
va_end(ap);
qtest_start(cmdline);
qtest_irq_intercept_in(global_qtest, "ioapic");
guest_malloc = pc_alloc_init();
}
static void ide_test_quit(void)
{
qtest_quit(global_qtest);
}
static QPCIDevice *get_pci_device(uint16_t *bmdma_base)
{
QPCIDevice *dev;
uint16_t vendor_id, device_id;
if (!pcibus) {
pcibus = qpci_init_pc();
}
/* Find PCI device and verify it's the right one */
dev = qpci_device_find(pcibus, QPCI_DEVFN(IDE_PCI_DEV, IDE_PCI_FUNC));
g_assert(dev != NULL);
vendor_id = qpci_config_readw(dev, PCI_VENDOR_ID);
device_id = qpci_config_readw(dev, PCI_DEVICE_ID);
g_assert(vendor_id == PCI_VENDOR_ID_INTEL);
g_assert(device_id == PCI_DEVICE_ID_INTEL_82371SB_1);
/* Map bmdma BAR */
*bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4);
qpci_device_enable(dev);
return dev;
}
static void free_pci_device(QPCIDevice *dev)
{
/* libqos doesn't have a function for this, so free it manually */
g_free(dev);
}
typedef struct PrdtEntry {
uint32_t addr;
uint32_t size;
} QEMU_PACKED PrdtEntry;
#define assert_bit_set(data, mask) g_assert_cmphex((data) & (mask), ==, (mask))
#define assert_bit_clear(data, mask) g_assert_cmphex((data) & (mask), ==, 0)
static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
PrdtEntry *prdt, int prdt_entries)
{
QPCIDevice *dev;
uint16_t bmdma_base;
uintptr_t guest_prdt;
size_t len;
bool from_dev;
uint8_t status;
int flags;
dev = get_pci_device(&bmdma_base);
flags = cmd & ~0xff;
cmd &= 0xff;
switch (cmd) {
case CMD_READ_DMA:
from_dev = true;
break;
case CMD_WRITE_DMA:
from_dev = false;
break;
default:
g_assert_not_reached();
}
/* Select device 0 */
outb(IDE_BASE + reg_device, 0 | LBA);
/* Stop any running transfer, clear any pending interrupt */
outb(bmdma_base + bmreg_cmd, 0);
outb(bmdma_base + bmreg_status, BM_STS_INTR);
/* Setup PRDT */
len = sizeof(*prdt) * prdt_entries;
guest_prdt = guest_alloc(guest_malloc, len);
memwrite(guest_prdt, prdt, len);
outl(bmdma_base + bmreg_prdt, guest_prdt);
/* ATA DMA command */
outb(IDE_BASE + reg_nsectors, nb_sectors);
outb(IDE_BASE + reg_lba_low, sector & 0xff);
outb(IDE_BASE + reg_lba_middle, (sector >> 8) & 0xff);
outb(IDE_BASE + reg_lba_high, (sector >> 16) & 0xff);
outb(IDE_BASE + reg_command, cmd);
/* Start DMA transfer */
outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0));
if (flags & CMDF_ABORT) {
outb(bmdma_base + bmreg_cmd, 0);
}
/* Wait for the DMA transfer to complete */
do {
status = inb(bmdma_base + bmreg_status);
} while ((status & (BM_STS_ACTIVE | BM_STS_INTR)) == BM_STS_ACTIVE);
g_assert_cmpint(get_irq(IDE_PRIMARY_IRQ), ==, !!(status & BM_STS_INTR));
/* Check IDE status code */
assert_bit_set(inb(IDE_BASE + reg_status), DRDY);
assert_bit_clear(inb(IDE_BASE + reg_status), BSY | DRQ);
/* Reading the status register clears the IRQ */
g_assert(!get_irq(IDE_PRIMARY_IRQ));
/* Stop DMA transfer if still active */
if (status & BM_STS_ACTIVE) {
outb(bmdma_base + bmreg_cmd, 0);
}
free_pci_device(dev);
return status;
}
static void test_bmdma_simple_rw(void)
{
uint8_t status;
uint8_t *buf;
uint8_t *cmpbuf;
size_t len = 512;
uintptr_t guest_buf = guest_alloc(guest_malloc, len);
PrdtEntry prdt[] = {
{
.addr = cpu_to_le32(guest_buf),
.size = cpu_to_le32(len | PRDT_EOT),
},
};
buf = g_malloc(len);
cmpbuf = g_malloc(len);
/* Write 0x55 pattern to sector 0 */
memset(buf, 0x55, len);
memwrite(guest_buf, buf, len);
status = send_dma_request(CMD_WRITE_DMA, 0, 1, prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, BM_STS_INTR);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
/* Write 0xaa pattern to sector 1 */
memset(buf, 0xaa, len);
memwrite(guest_buf, buf, len);
status = send_dma_request(CMD_WRITE_DMA, 1, 1, prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, BM_STS_INTR);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
/* Read and verify 0x55 pattern in sector 0 */
memset(cmpbuf, 0x55, len);
status = send_dma_request(CMD_READ_DMA, 0, 1, prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, BM_STS_INTR);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
memread(guest_buf, buf, len);
g_assert(memcmp(buf, cmpbuf, len) == 0);
/* Read and verify 0xaa pattern in sector 1 */
memset(cmpbuf, 0xaa, len);
status = send_dma_request(CMD_READ_DMA, 1, 1, prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, BM_STS_INTR);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
memread(guest_buf, buf, len);
g_assert(memcmp(buf, cmpbuf, len) == 0);
g_free(buf);
g_free(cmpbuf);
}
static void test_bmdma_short_prdt(void)
{
uint8_t status;
PrdtEntry prdt[] = {
{
.addr = 0,
.size = cpu_to_le32(0x10 | PRDT_EOT),
},
};
/* Normal request */
status = send_dma_request(CMD_READ_DMA, 0, 1,
prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, 0);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
/* Abort the request before it completes */
status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, 0);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
}
static void test_bmdma_long_prdt(void)
{
uint8_t status;
PrdtEntry prdt[] = {
{
.addr = 0,
.size = cpu_to_le32(0x1000 | PRDT_EOT),
},
};
/* Normal request */
status = send_dma_request(CMD_READ_DMA, 0, 1,
prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
/* Abort the request before it completes */
status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
prdt, ARRAY_SIZE(prdt));
g_assert_cmphex(status, ==, BM_STS_INTR);
assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
}
static void test_bmdma_setup(void)
{
ide_test_start(
"-vnc none "
"-drive file=%s,if=ide,serial=%s,cache=writeback "
"-global ide-hd.ver=%s",
tmp_path, "testdisk", "version");
}
static void test_bmdma_teardown(void)
{
ide_test_quit();
}
static void string_cpu_to_be16(uint16_t *s, size_t bytes)
{
g_assert((bytes & 1) == 0);
bytes /= 2;
while (bytes--) {
*s = cpu_to_be16(*s);
s++;
}
}
static void test_identify(void)
{
uint8_t data;
uint16_t buf[256];
int i;
int ret;
ide_test_start(
"-vnc none "
"-drive file=%s,if=ide,serial=%s,cache=writeback "
"-global ide-hd.ver=%s",
tmp_path, "testdisk", "version");
/* IDENTIFY command on device 0*/
outb(IDE_BASE + reg_device, 0);
outb(IDE_BASE + reg_command, CMD_IDENTIFY);
/* Read in the IDENTIFY buffer and check registers */
data = inb(IDE_BASE + reg_device);
g_assert_cmpint(data & DEV, ==, 0);
for (i = 0; i < 256; i++) {
data = inb(IDE_BASE + reg_status);
assert_bit_set(data, DRDY | DRQ);
assert_bit_clear(data, BSY | DF | ERR);
((uint16_t*) buf)[i] = inw(IDE_BASE + reg_data);
}
data = inb(IDE_BASE + reg_status);
assert_bit_set(data, DRDY);
assert_bit_clear(data, BSY | DF | ERR | DRQ);
/* Check serial number/version in the buffer */
string_cpu_to_be16(&buf[10], 20);
ret = memcmp(&buf[10], "testdisk ", 20);
g_assert(ret == 0);
string_cpu_to_be16(&buf[23], 8);
ret = memcmp(&buf[23], "version ", 8);
g_assert(ret == 0);
/* Write cache enabled bit */
assert_bit_set(buf[85], 0x20);
ide_test_quit();
}
static void test_flush(void)
{
uint8_t data;
ide_test_start(
"-vnc none "
"-drive file=blkdebug::%s,if=ide,cache=writeback",
tmp_path);
/* Delay the completion of the flush request until we explicitly do it */
qmp("{'execute':'human-monitor-command', 'arguments': { "
"'command-line': 'qemu-io ide0-hd0 \"break flush_to_os A\"'} }");
/* FLUSH CACHE command on device 0*/
outb(IDE_BASE + reg_device, 0);
outb(IDE_BASE + reg_command, CMD_FLUSH_CACHE);
/* Check status while request is in flight*/
data = inb(IDE_BASE + reg_status);
assert_bit_set(data, BSY | DRDY);
assert_bit_clear(data, DF | ERR | DRQ);
/* Complete the command */
qmp("{'execute':'human-monitor-command', 'arguments': { "
"'command-line': 'qemu-io ide0-hd0 \"resume A\"'} }");
/* Check registers */
data = inb(IDE_BASE + reg_device);
g_assert_cmpint(data & DEV, ==, 0);
do {
data = inb(IDE_BASE + reg_status);
} while (data & BSY);
assert_bit_set(data, DRDY);
assert_bit_clear(data, BSY | DF | ERR | DRQ);
ide_test_quit();
}
int main(int argc, char **argv)
{
const char *arch = qtest_get_arch();
int fd;
int ret;
/* Check architecture */
if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
g_test_message("Skipping test for non-x86\n");
return 0;
}
/* Create a temporary raw image */
fd = mkstemp(tmp_path);
g_assert(fd >= 0);
ret = ftruncate(fd, TEST_IMAGE_SIZE);
g_assert(ret == 0);
close(fd);
/* Run the tests */
g_test_init(&argc, &argv, NULL);
qtest_add_func("/ide/identify", test_identify);
qtest_add_func("/ide/bmdma/setup", test_bmdma_setup);
qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw);
qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt);
qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt);
qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown);
qtest_add_func("/ide/flush", test_flush);
ret = g_test_run();
/* Cleanup */
unlink(tmp_path);
return ret;
}