qemu-e2k/hw/intc/arm_gicv3_redist.c

1166 lines
38 KiB
C

/*
* ARM GICv3 emulation: Redistributor
*
* Copyright (c) 2015 Huawei.
* Copyright (c) 2016 Linaro Limited.
* Written by Shlomo Pongratz, Peter Maydell
*
* This code is licensed under the GPL, version 2 or (at your option)
* any later version.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "trace.h"
#include "gicv3_internal.h"
static uint32_t mask_group(GICv3CPUState *cs, MemTxAttrs attrs)
{
/* Return a 32-bit mask which should be applied for this set of 32
* interrupts; each bit is 1 if access is permitted by the
* combination of attrs.secure and GICR_GROUPR. (GICR_NSACR does
* not affect config register accesses, unlike GICD_NSACR.)
*/
if (!attrs.secure && !(cs->gic->gicd_ctlr & GICD_CTLR_DS)) {
/* bits for Group 0 or Secure Group 1 interrupts are RAZ/WI */
return cs->gicr_igroupr0;
}
return 0xFFFFFFFFU;
}
static int gicr_ns_access(GICv3CPUState *cs, int irq)
{
/* Return the 2 bit NSACR.NS_access field for this SGI */
assert(irq < 16);
return extract32(cs->gicr_nsacr, irq * 2, 2);
}
static void gicr_write_set_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs,
uint32_t *reg, uint32_t val)
{
/* Helper routine to implement writing to a "set-bitmap" register */
val &= mask_group(cs, attrs);
*reg |= val;
gicv3_redist_update(cs);
}
static void gicr_write_clear_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs,
uint32_t *reg, uint32_t val)
{
/* Helper routine to implement writing to a "clear-bitmap" register */
val &= mask_group(cs, attrs);
*reg &= ~val;
gicv3_redist_update(cs);
}
static uint32_t gicr_read_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs,
uint32_t reg)
{
reg &= mask_group(cs, attrs);
return reg;
}
static bool vcpu_resident(GICv3CPUState *cs, uint64_t vptaddr)
{
/*
* Return true if a vCPU is resident, which is defined by
* whether the GICR_VPENDBASER register is marked VALID and
* has the right virtual pending table address.
*/
if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) {
return false;
}
return vptaddr == (cs->gicr_vpendbaser & R_GICR_VPENDBASER_PHYADDR_MASK);
}
/**
* update_for_one_lpi: Update pending information if this LPI is better
*
* @cs: GICv3CPUState
* @irq: interrupt to look up in the LPI Configuration table
* @ctbase: physical address of the LPI Configuration table to use
* @ds: true if priority value should not be shifted
* @hpp: points to pending information to update
*
* Look up @irq in the Configuration table specified by @ctbase
* to see if it is enabled and what its priority is. If it is an
* enabled interrupt with a higher priority than that currently
* recorded in @hpp, update @hpp.
*/
static void update_for_one_lpi(GICv3CPUState *cs, int irq,
uint64_t ctbase, bool ds, PendingIrq *hpp)
{
uint8_t lpite;
uint8_t prio;
address_space_read(&cs->gic->dma_as,
ctbase + ((irq - GICV3_LPI_INTID_START) * sizeof(lpite)),
MEMTXATTRS_UNSPECIFIED, &lpite, sizeof(lpite));
if (!(lpite & LPI_CTE_ENABLED)) {
return;
}
if (ds) {
prio = lpite & LPI_PRIORITY_MASK;
} else {
prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80;
}
if ((prio < hpp->prio) ||
((prio == hpp->prio) && (irq <= hpp->irq))) {
hpp->irq = irq;
hpp->prio = prio;
/* LPIs and vLPIs are always non-secure Grp1 interrupts */
hpp->grp = GICV3_G1NS;
}
}
/**
* update_for_all_lpis: Fully scan LPI tables and find best pending LPI
*
* @cs: GICv3CPUState
* @ptbase: physical address of LPI Pending table
* @ctbase: physical address of LPI Configuration table
* @ptsizebits: size of tables, specified as number of interrupt ID bits minus 1
* @ds: true if priority value should not be shifted
* @hpp: points to pending information to set
*
* Recalculate the highest priority pending enabled LPI from scratch,
* and set @hpp accordingly.
*
* We scan the LPI pending table @ptbase; for each pending LPI, we read the
* corresponding entry in the LPI configuration table @ctbase to extract
* the priority and enabled information.
*
* We take @ptsizebits in the form idbits-1 because this is the way that
* LPI table sizes are architecturally specified in GICR_PROPBASER.IDBits
* and in the VMAPP command's VPT_size field.
*/
static void update_for_all_lpis(GICv3CPUState *cs, uint64_t ptbase,
uint64_t ctbase, unsigned ptsizebits,
bool ds, PendingIrq *hpp)
{
AddressSpace *as = &cs->gic->dma_as;
uint8_t pend;
uint32_t pendt_size = (1ULL << (ptsizebits + 1));
int i, bit;
hpp->prio = 0xff;
for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
address_space_read(as, ptbase + i, MEMTXATTRS_UNSPECIFIED, &pend, 1);
while (pend) {
bit = ctz32(pend);
update_for_one_lpi(cs, i * 8 + bit, ctbase, ds, hpp);
pend &= ~(1 << bit);
}
}
}
/**
* set_lpi_pending_bit: Set or clear pending bit for an LPI
*
* @cs: GICv3CPUState
* @ptbase: physical address of LPI Pending table
* @irq: LPI to change pending state for
* @level: false to clear pending state, true to set
*
* Returns true if we needed to do something, false if the pending bit
* was already at @level.
*/
static bool set_pending_table_bit(GICv3CPUState *cs, uint64_t ptbase,
int irq, bool level)
{
AddressSpace *as = &cs->gic->dma_as;
uint64_t addr = ptbase + irq / 8;
uint8_t pend;
address_space_read(as, addr, MEMTXATTRS_UNSPECIFIED, &pend, 1);
if (extract32(pend, irq % 8, 1) == level) {
/* Bit already at requested state, no action required */
return false;
}
pend = deposit32(pend, irq % 8, 1, level ? 1 : 0);
address_space_write(as, addr, MEMTXATTRS_UNSPECIFIED, &pend, 1);
return true;
}
static uint8_t gicr_read_ipriorityr(GICv3CPUState *cs, MemTxAttrs attrs,
int irq)
{
/* Read the value of GICR_IPRIORITYR<n> for the specified interrupt,
* honouring security state (these are RAZ/WI for Group 0 or Secure
* Group 1 interrupts).
*/
uint32_t prio;
prio = cs->gicr_ipriorityr[irq];
if (!attrs.secure && !(cs->gic->gicd_ctlr & GICD_CTLR_DS)) {
if (!(cs->gicr_igroupr0 & (1U << irq))) {
/* Fields for Group 0 or Secure Group 1 interrupts are RAZ/WI */
return 0;
}
/* NS view of the interrupt priority */
prio = (prio << 1) & 0xff;
}
return prio;
}
static void gicr_write_ipriorityr(GICv3CPUState *cs, MemTxAttrs attrs, int irq,
uint8_t value)
{
/* Write the value of GICD_IPRIORITYR<n> for the specified interrupt,
* honouring security state (these are RAZ/WI for Group 0 or Secure
* Group 1 interrupts).
*/
if (!attrs.secure && !(cs->gic->gicd_ctlr & GICD_CTLR_DS)) {
if (!(cs->gicr_igroupr0 & (1U << irq))) {
/* Fields for Group 0 or Secure Group 1 interrupts are RAZ/WI */
return;
}
/* NS view of the interrupt priority */
value = 0x80 | (value >> 1);
}
cs->gicr_ipriorityr[irq] = value;
}
static void gicv3_redist_update_vlpi_only(GICv3CPUState *cs)
{
uint64_t ptbase, ctbase, idbits;
if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) {
cs->hppvlpi.prio = 0xff;
return;
}
ptbase = cs->gicr_vpendbaser & R_GICR_VPENDBASER_PHYADDR_MASK;
ctbase = cs->gicr_vpropbaser & R_GICR_VPROPBASER_PHYADDR_MASK;
idbits = FIELD_EX64(cs->gicr_vpropbaser, GICR_VPROPBASER, IDBITS);
update_for_all_lpis(cs, ptbase, ctbase, idbits, true, &cs->hppvlpi);
}
static void gicv3_redist_update_vlpi(GICv3CPUState *cs)
{
gicv3_redist_update_vlpi_only(cs);
gicv3_cpuif_virt_irq_fiq_update(cs);
}
static void gicr_write_vpendbaser(GICv3CPUState *cs, uint64_t newval)
{
/* Write @newval to GICR_VPENDBASER, handling its effects */
bool oldvalid = FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID);
bool newvalid = FIELD_EX64(newval, GICR_VPENDBASER, VALID);
bool pendinglast;
/*
* The DIRTY bit is read-only and for us is always zero;
* other fields are writable.
*/
newval &= R_GICR_VPENDBASER_INNERCACHE_MASK |
R_GICR_VPENDBASER_SHAREABILITY_MASK |
R_GICR_VPENDBASER_PHYADDR_MASK |
R_GICR_VPENDBASER_OUTERCACHE_MASK |
R_GICR_VPENDBASER_PENDINGLAST_MASK |
R_GICR_VPENDBASER_IDAI_MASK |
R_GICR_VPENDBASER_VALID_MASK;
if (oldvalid && newvalid) {
/*
* Changing other fields while VALID is 1 is UNPREDICTABLE;
* we choose to log and ignore the write.
*/
if (cs->gicr_vpendbaser ^ newval) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Changing GICR_VPENDBASER when VALID=1 "
"is UNPREDICTABLE\n", __func__);
}
return;
}
if (!oldvalid && !newvalid) {
cs->gicr_vpendbaser = newval;
return;
}
if (newvalid) {
/*
* Valid going from 0 to 1: update hppvlpi from tables.
* If IDAI is 0 we are allowed to use the info we cached in
* the IMPDEF area of the table.
* PendingLast is RES1 when we make this transition.
*/
pendinglast = true;
} else {
/*
* Valid going from 1 to 0:
* Set PendingLast if there was a pending enabled interrupt
* for the vPE that was just descheduled.
* If we cache info in the IMPDEF area, write it out here.
*/
pendinglast = cs->hppvlpi.prio != 0xff;
}
newval = FIELD_DP64(newval, GICR_VPENDBASER, PENDINGLAST, pendinglast);
cs->gicr_vpendbaser = newval;
gicv3_redist_update_vlpi(cs);
}
static MemTxResult gicr_readb(GICv3CPUState *cs, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
switch (offset) {
case GICR_IPRIORITYR ... GICR_IPRIORITYR + 0x1f:
*data = gicr_read_ipriorityr(cs, attrs, offset - GICR_IPRIORITYR);
return MEMTX_OK;
default:
return MEMTX_ERROR;
}
}
static MemTxResult gicr_writeb(GICv3CPUState *cs, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
switch (offset) {
case GICR_IPRIORITYR ... GICR_IPRIORITYR + 0x1f:
gicr_write_ipriorityr(cs, attrs, offset - GICR_IPRIORITYR, value);
gicv3_redist_update(cs);
return MEMTX_OK;
default:
return MEMTX_ERROR;
}
}
static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
switch (offset) {
case GICR_CTLR:
*data = cs->gicr_ctlr;
return MEMTX_OK;
case GICR_IIDR:
*data = gicv3_iidr();
return MEMTX_OK;
case GICR_TYPER:
*data = extract64(cs->gicr_typer, 0, 32);
return MEMTX_OK;
case GICR_TYPER + 4:
*data = extract64(cs->gicr_typer, 32, 32);
return MEMTX_OK;
case GICR_STATUSR:
/* RAZ/WI for us (this is an optional register and our implementation
* does not track RO/WO/reserved violations to report them to the guest)
*/
*data = 0;
return MEMTX_OK;
case GICR_WAKER:
*data = cs->gicr_waker;
return MEMTX_OK;
case GICR_PROPBASER:
*data = extract64(cs->gicr_propbaser, 0, 32);
return MEMTX_OK;
case GICR_PROPBASER + 4:
*data = extract64(cs->gicr_propbaser, 32, 32);
return MEMTX_OK;
case GICR_PENDBASER:
*data = extract64(cs->gicr_pendbaser, 0, 32);
return MEMTX_OK;
case GICR_PENDBASER + 4:
*data = extract64(cs->gicr_pendbaser, 32, 32);
return MEMTX_OK;
case GICR_IGROUPR0:
if (!attrs.secure && !(cs->gic->gicd_ctlr & GICD_CTLR_DS)) {
*data = 0;
return MEMTX_OK;
}
*data = cs->gicr_igroupr0;
return MEMTX_OK;
case GICR_ISENABLER0:
case GICR_ICENABLER0:
*data = gicr_read_bitmap_reg(cs, attrs, cs->gicr_ienabler0);
return MEMTX_OK;
case GICR_ISPENDR0:
case GICR_ICPENDR0:
{
/* The pending register reads as the logical OR of the pending
* latch and the input line level for level-triggered interrupts.
*/
uint32_t val = cs->gicr_ipendr0 | (~cs->edge_trigger & cs->level);
*data = gicr_read_bitmap_reg(cs, attrs, val);
return MEMTX_OK;
}
case GICR_ISACTIVER0:
case GICR_ICACTIVER0:
*data = gicr_read_bitmap_reg(cs, attrs, cs->gicr_iactiver0);
return MEMTX_OK;
case GICR_IPRIORITYR ... GICR_IPRIORITYR + 0x1f:
{
int i, irq = offset - GICR_IPRIORITYR;
uint32_t value = 0;
for (i = irq + 3; i >= irq; i--) {
value <<= 8;
value |= gicr_read_ipriorityr(cs, attrs, i);
}
*data = value;
return MEMTX_OK;
}
case GICR_ICFGR0:
case GICR_ICFGR1:
{
/* Our edge_trigger bitmap is one bit per irq; take the correct
* half of it, and spread it out into the odd bits.
*/
uint32_t value;
value = cs->edge_trigger & mask_group(cs, attrs);
value = extract32(value, (offset == GICR_ICFGR1) ? 16 : 0, 16);
value = half_shuffle32(value) << 1;
*data = value;
return MEMTX_OK;
}
case GICR_IGRPMODR0:
if ((cs->gic->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
/* RAZ/WI if security disabled, or if
* security enabled and this is an NS access
*/
*data = 0;
return MEMTX_OK;
}
*data = cs->gicr_igrpmodr0;
return MEMTX_OK;
case GICR_NSACR:
if ((cs->gic->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
/* RAZ/WI if security disabled, or if
* security enabled and this is an NS access
*/
*data = 0;
return MEMTX_OK;
}
*data = cs->gicr_nsacr;
return MEMTX_OK;
case GICR_IDREGS ... GICR_IDREGS + 0x2f:
*data = gicv3_idreg(cs->gic, offset - GICR_IDREGS, GICV3_PIDR0_REDIST);
return MEMTX_OK;
/*
* VLPI frame registers. We don't need a version check for
* VPROPBASER and VPENDBASER because gicv3_redist_size() will
* prevent pre-v4 GIC from passing us offsets this high.
*/
case GICR_VPROPBASER:
*data = extract64(cs->gicr_vpropbaser, 0, 32);
return MEMTX_OK;
case GICR_VPROPBASER + 4:
*data = extract64(cs->gicr_vpropbaser, 32, 32);
return MEMTX_OK;
case GICR_VPENDBASER:
*data = extract64(cs->gicr_vpendbaser, 0, 32);
return MEMTX_OK;
case GICR_VPENDBASER + 4:
*data = extract64(cs->gicr_vpendbaser, 32, 32);
return MEMTX_OK;
default:
return MEMTX_ERROR;
}
}
static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
switch (offset) {
case GICR_CTLR:
/* For our implementation, GICR_TYPER.DPGS is 0 and so all
* the DPG bits are RAZ/WI. We don't do anything asynchronously,
* so UWP and RWP are RAZ/WI. GICR_TYPER.LPIS is 1 (we
* implement LPIs) so Enable_LPIs is programmable.
*/
if (cs->gicr_typer & GICR_TYPER_PLPIS) {
if (value & GICR_CTLR_ENABLE_LPIS) {
cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
/* Check for any pending interr in pending table */
gicv3_redist_update_lpi(cs);
} else {
cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
/* cs->hppi might have been an LPI; recalculate */
gicv3_redist_update(cs);
}
}
return MEMTX_OK;
case GICR_STATUSR:
/* RAZ/WI for our implementation */
return MEMTX_OK;
case GICR_WAKER:
/* Only the ProcessorSleep bit is writable. When the guest sets
* it it requests that we transition the channel between the
* redistributor and the cpu interface to quiescent, and that
* we set the ChildrenAsleep bit once the inteface has reached the
* quiescent state.
* Setting the ProcessorSleep to 0 reverses the quiescing, and
* ChildrenAsleep is cleared once the transition is complete.
* Since our interface is not asynchronous, we complete these
* transitions instantaneously, so we set ChildrenAsleep to the
* same value as ProcessorSleep here.
*/
value &= GICR_WAKER_ProcessorSleep;
if (value & GICR_WAKER_ProcessorSleep) {
value |= GICR_WAKER_ChildrenAsleep;
}
cs->gicr_waker = value;
return MEMTX_OK;
case GICR_PROPBASER:
cs->gicr_propbaser = deposit64(cs->gicr_propbaser, 0, 32, value);
return MEMTX_OK;
case GICR_PROPBASER + 4:
cs->gicr_propbaser = deposit64(cs->gicr_propbaser, 32, 32, value);
return MEMTX_OK;
case GICR_PENDBASER:
cs->gicr_pendbaser = deposit64(cs->gicr_pendbaser, 0, 32, value);
return MEMTX_OK;
case GICR_PENDBASER + 4:
cs->gicr_pendbaser = deposit64(cs->gicr_pendbaser, 32, 32, value);
return MEMTX_OK;
case GICR_IGROUPR0:
if (!attrs.secure && !(cs->gic->gicd_ctlr & GICD_CTLR_DS)) {
return MEMTX_OK;
}
cs->gicr_igroupr0 = value;
gicv3_redist_update(cs);
return MEMTX_OK;
case GICR_ISENABLER0:
gicr_write_set_bitmap_reg(cs, attrs, &cs->gicr_ienabler0, value);
return MEMTX_OK;
case GICR_ICENABLER0:
gicr_write_clear_bitmap_reg(cs, attrs, &cs->gicr_ienabler0, value);
return MEMTX_OK;
case GICR_ISPENDR0:
gicr_write_set_bitmap_reg(cs, attrs, &cs->gicr_ipendr0, value);
return MEMTX_OK;
case GICR_ICPENDR0:
gicr_write_clear_bitmap_reg(cs, attrs, &cs->gicr_ipendr0, value);
return MEMTX_OK;
case GICR_ISACTIVER0:
gicr_write_set_bitmap_reg(cs, attrs, &cs->gicr_iactiver0, value);
return MEMTX_OK;
case GICR_ICACTIVER0:
gicr_write_clear_bitmap_reg(cs, attrs, &cs->gicr_iactiver0, value);
return MEMTX_OK;
case GICR_IPRIORITYR ... GICR_IPRIORITYR + 0x1f:
{
int i, irq = offset - GICR_IPRIORITYR;
for (i = irq; i < irq + 4; i++, value >>= 8) {
gicr_write_ipriorityr(cs, attrs, i, value);
}
gicv3_redist_update(cs);
return MEMTX_OK;
}
case GICR_ICFGR0:
/* Register is all RAZ/WI or RAO/WI bits */
return MEMTX_OK;
case GICR_ICFGR1:
{
uint32_t mask;
/* Since our edge_trigger bitmap is one bit per irq, our input
* 32-bits will compress down into 16 bits which we need
* to write into the bitmap.
*/
value = half_unshuffle32(value >> 1) << 16;
mask = mask_group(cs, attrs) & 0xffff0000U;
cs->edge_trigger &= ~mask;
cs->edge_trigger |= (value & mask);
gicv3_redist_update(cs);
return MEMTX_OK;
}
case GICR_IGRPMODR0:
if ((cs->gic->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
/* RAZ/WI if security disabled, or if
* security enabled and this is an NS access
*/
return MEMTX_OK;
}
cs->gicr_igrpmodr0 = value;
gicv3_redist_update(cs);
return MEMTX_OK;
case GICR_NSACR:
if ((cs->gic->gicd_ctlr & GICD_CTLR_DS) || !attrs.secure) {
/* RAZ/WI if security disabled, or if
* security enabled and this is an NS access
*/
return MEMTX_OK;
}
cs->gicr_nsacr = value;
/* no update required as this only affects access permission checks */
return MEMTX_OK;
case GICR_IIDR:
case GICR_TYPER:
case GICR_IDREGS ... GICR_IDREGS + 0x2f:
/* RO registers, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
return MEMTX_OK;
/*
* VLPI frame registers. We don't need a version check for
* VPROPBASER and VPENDBASER because gicv3_redist_size() will
* prevent pre-v4 GIC from passing us offsets this high.
*/
case GICR_VPROPBASER:
cs->gicr_vpropbaser = deposit64(cs->gicr_vpropbaser, 0, 32, value);
return MEMTX_OK;
case GICR_VPROPBASER + 4:
cs->gicr_vpropbaser = deposit64(cs->gicr_vpropbaser, 32, 32, value);
return MEMTX_OK;
case GICR_VPENDBASER:
gicr_write_vpendbaser(cs, deposit64(cs->gicr_vpendbaser, 0, 32, value));
return MEMTX_OK;
case GICR_VPENDBASER + 4:
gicr_write_vpendbaser(cs, deposit64(cs->gicr_vpendbaser, 32, 32, value));
return MEMTX_OK;
default:
return MEMTX_ERROR;
}
}
static MemTxResult gicr_readll(GICv3CPUState *cs, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
switch (offset) {
case GICR_TYPER:
*data = cs->gicr_typer;
return MEMTX_OK;
case GICR_PROPBASER:
*data = cs->gicr_propbaser;
return MEMTX_OK;
case GICR_PENDBASER:
*data = cs->gicr_pendbaser;
return MEMTX_OK;
/*
* VLPI frame registers. We don't need a version check for
* VPROPBASER and VPENDBASER because gicv3_redist_size() will
* prevent pre-v4 GIC from passing us offsets this high.
*/
case GICR_VPROPBASER:
*data = cs->gicr_vpropbaser;
return MEMTX_OK;
case GICR_VPENDBASER:
*data = cs->gicr_vpendbaser;
return MEMTX_OK;
default:
return MEMTX_ERROR;
}
}
static MemTxResult gicr_writell(GICv3CPUState *cs, hwaddr offset,
uint64_t value, MemTxAttrs attrs)
{
switch (offset) {
case GICR_PROPBASER:
cs->gicr_propbaser = value;
return MEMTX_OK;
case GICR_PENDBASER:
cs->gicr_pendbaser = value;
return MEMTX_OK;
case GICR_TYPER:
/* RO register, ignore the write */
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write to RO register at offset "
TARGET_FMT_plx "\n", __func__, offset);
return MEMTX_OK;
/*
* VLPI frame registers. We don't need a version check for
* VPROPBASER and VPENDBASER because gicv3_redist_size() will
* prevent pre-v4 GIC from passing us offsets this high.
*/
case GICR_VPROPBASER:
cs->gicr_vpropbaser = value;
return MEMTX_OK;
case GICR_VPENDBASER:
gicr_write_vpendbaser(cs, value);
return MEMTX_OK;
default:
return MEMTX_ERROR;
}
}
MemTxResult gicv3_redist_read(void *opaque, hwaddr offset, uint64_t *data,
unsigned size, MemTxAttrs attrs)
{
GICv3RedistRegion *region = opaque;
GICv3State *s = region->gic;
GICv3CPUState *cs;
MemTxResult r;
int cpuidx;
assert((offset & (size - 1)) == 0);
/*
* There are (for GICv3) two 64K redistributor pages per CPU.
* In some cases the redistributor pages for all CPUs are not
* contiguous (eg on the virt board they are split into two
* parts if there are too many CPUs to all fit in the same place
* in the memory map); if so then the GIC has multiple MemoryRegions
* for the redistributors.
*/
cpuidx = region->cpuidx + offset / gicv3_redist_size(s);
offset %= gicv3_redist_size(s);
cs = &s->cpu[cpuidx];
switch (size) {
case 1:
r = gicr_readb(cs, offset, data, attrs);
break;
case 4:
r = gicr_readl(cs, offset, data, attrs);
break;
case 8:
r = gicr_readll(cs, offset, data, attrs);
break;
default:
r = MEMTX_ERROR;
break;
}
if (r != MEMTX_OK) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest read at offset " TARGET_FMT_plx
" size %u\n", __func__, offset, size);
trace_gicv3_redist_badread(gicv3_redist_affid(cs), offset,
size, attrs.secure);
/* The spec requires that reserved registers are RAZ/WI;
* so use MEMTX_ERROR returns from leaf functions as a way to
* trigger the guest-error logging but don't return it to
* the caller, or we'll cause a spurious guest data abort.
*/
r = MEMTX_OK;
*data = 0;
} else {
trace_gicv3_redist_read(gicv3_redist_affid(cs), offset, *data,
size, attrs.secure);
}
return r;
}
MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs)
{
GICv3RedistRegion *region = opaque;
GICv3State *s = region->gic;
GICv3CPUState *cs;
MemTxResult r;
int cpuidx;
assert((offset & (size - 1)) == 0);
/*
* There are (for GICv3) two 64K redistributor pages per CPU.
* In some cases the redistributor pages for all CPUs are not
* contiguous (eg on the virt board they are split into two
* parts if there are too many CPUs to all fit in the same place
* in the memory map); if so then the GIC has multiple MemoryRegions
* for the redistributors.
*/
cpuidx = region->cpuidx + offset / gicv3_redist_size(s);
offset %= gicv3_redist_size(s);
cs = &s->cpu[cpuidx];
switch (size) {
case 1:
r = gicr_writeb(cs, offset, data, attrs);
break;
case 4:
r = gicr_writel(cs, offset, data, attrs);
break;
case 8:
r = gicr_writell(cs, offset, data, attrs);
break;
default:
r = MEMTX_ERROR;
break;
}
if (r != MEMTX_OK) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: invalid guest write at offset " TARGET_FMT_plx
" size %u\n", __func__, offset, size);
trace_gicv3_redist_badwrite(gicv3_redist_affid(cs), offset, data,
size, attrs.secure);
/* The spec requires that reserved registers are RAZ/WI;
* so use MEMTX_ERROR returns from leaf functions as a way to
* trigger the guest-error logging but don't return it to
* the caller, or we'll cause a spurious guest data abort.
*/
r = MEMTX_OK;
} else {
trace_gicv3_redist_write(gicv3_redist_affid(cs), offset, data,
size, attrs.secure);
}
return r;
}
static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq)
{
uint64_t lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK;
update_for_one_lpi(cs, irq, lpict_baddr,
cs->gic->gicd_ctlr & GICD_CTLR_DS,
&cs->hpplpi);
}
void gicv3_redist_update_lpi_only(GICv3CPUState *cs)
{
/*
* This function scans the LPI pending table and for each pending
* LPI, reads the corresponding entry from LPI configuration table
* to extract the priority info and determine if the current LPI
* priority is lower than the last computed high priority lpi interrupt.
* If yes, replace current LPI as the new high priority lpi interrupt.
*/
uint64_t lpipt_baddr, lpict_baddr;
uint64_t idbits;
idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
GICD_TYPER_IDBITS);
if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) {
return;
}
lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK;
update_for_all_lpis(cs, lpipt_baddr, lpict_baddr, idbits,
cs->gic->gicd_ctlr & GICD_CTLR_DS, &cs->hpplpi);
}
void gicv3_redist_update_lpi(GICv3CPUState *cs)
{
gicv3_redist_update_lpi_only(cs);
gicv3_redist_update(cs);
}
void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
{
/*
* This function updates the pending bit in lpi pending table for
* the irq being activated or deactivated.
*/
uint64_t lpipt_baddr;
lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
if (!set_pending_table_bit(cs, lpipt_baddr, irq, level)) {
/* no change in the value of pending bit, return */
return;
}
/*
* check if this LPI is better than the current hpplpi, if yes
* just set hpplpi.prio and .irq without doing a full rescan
*/
if (level) {
gicv3_redist_check_lpi_priority(cs, irq);
gicv3_redist_update(cs);
} else {
if (irq == cs->hpplpi.irq) {
gicv3_redist_update_lpi(cs);
}
}
}
void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
{
uint64_t idbits;
idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
GICD_TYPER_IDBITS);
if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) ||
(irq > (1ULL << (idbits + 1)) - 1) || irq < GICV3_LPI_INTID_START) {
return;
}
/* set/clear the pending bit for this irq */
gicv3_redist_lpi_pending(cs, irq, level);
}
void gicv3_redist_inv_lpi(GICv3CPUState *cs, int irq)
{
/*
* The only cached information for LPIs we have is the HPPLPI.
* We could be cleverer about identifying when we don't need
* to do a full rescan of the pending table, but until we find
* this is a performance issue, just always recalculate.
*/
gicv3_redist_update_lpi(cs);
}
void gicv3_redist_mov_lpi(GICv3CPUState *src, GICv3CPUState *dest, int irq)
{
/*
* Move the specified LPI's pending state from the source redistributor
* to the destination.
*
* If LPIs are disabled on dest this is CONSTRAINED UNPREDICTABLE:
* we choose to NOP. If LPIs are disabled on source there's nothing
* to be transferred anyway.
*/
uint64_t idbits;
uint32_t pendt_size;
uint64_t src_baddr;
if (!(src->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) ||
!(dest->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) {
return;
}
idbits = MIN(FIELD_EX64(src->gicr_propbaser, GICR_PROPBASER, IDBITS),
GICD_TYPER_IDBITS);
idbits = MIN(FIELD_EX64(dest->gicr_propbaser, GICR_PROPBASER, IDBITS),
idbits);
pendt_size = 1ULL << (idbits + 1);
if ((irq / 8) >= pendt_size) {
return;
}
src_baddr = src->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
if (!set_pending_table_bit(src, src_baddr, irq, 0)) {
/* Not pending on source, nothing to do */
return;
}
if (irq == src->hpplpi.irq) {
/*
* We just made this LPI not-pending so only need to update
* if it was previously the highest priority pending LPI
*/
gicv3_redist_update_lpi(src);
}
/* Mark it pending on the destination */
gicv3_redist_lpi_pending(dest, irq, 1);
}
void gicv3_redist_movall_lpis(GICv3CPUState *src, GICv3CPUState *dest)
{
/*
* We must move all pending LPIs from the source redistributor
* to the destination. That is, for every pending LPI X on
* src, we must set it not-pending on src and pending on dest.
* LPIs that are already pending on dest are not cleared.
*
* If LPIs are disabled on dest this is CONSTRAINED UNPREDICTABLE:
* we choose to NOP. If LPIs are disabled on source there's nothing
* to be transferred anyway.
*/
AddressSpace *as = &src->gic->dma_as;
uint64_t idbits;
uint32_t pendt_size;
uint64_t src_baddr, dest_baddr;
int i;
if (!(src->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) ||
!(dest->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) {
return;
}
idbits = MIN(FIELD_EX64(src->gicr_propbaser, GICR_PROPBASER, IDBITS),
GICD_TYPER_IDBITS);
idbits = MIN(FIELD_EX64(dest->gicr_propbaser, GICR_PROPBASER, IDBITS),
idbits);
pendt_size = 1ULL << (idbits + 1);
src_baddr = src->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
dest_baddr = dest->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
uint8_t src_pend, dest_pend;
address_space_read(as, src_baddr + i, MEMTXATTRS_UNSPECIFIED,
&src_pend, sizeof(src_pend));
if (!src_pend) {
continue;
}
address_space_read(as, dest_baddr + i, MEMTXATTRS_UNSPECIFIED,
&dest_pend, sizeof(dest_pend));
dest_pend |= src_pend;
src_pend = 0;
address_space_write(as, src_baddr + i, MEMTXATTRS_UNSPECIFIED,
&src_pend, sizeof(src_pend));
address_space_write(as, dest_baddr + i, MEMTXATTRS_UNSPECIFIED,
&dest_pend, sizeof(dest_pend));
}
gicv3_redist_update_lpi(src);
gicv3_redist_update_lpi(dest);
}
void gicv3_redist_vlpi_pending(GICv3CPUState *cs, int irq, int level)
{
/*
* Change the pending state of the specified vLPI.
* Unlike gicv3_redist_process_vlpi(), we know here that the
* vCPU is definitely resident on this redistributor, and that
* the irq is in range.
*/
uint64_t vptbase, ctbase;
vptbase = FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, PHYADDR) << 16;
if (set_pending_table_bit(cs, vptbase, irq, level)) {
if (level) {
/* Check whether this vLPI is now the best */
ctbase = cs->gicr_vpropbaser & R_GICR_VPROPBASER_PHYADDR_MASK;
update_for_one_lpi(cs, irq, ctbase, true, &cs->hppvlpi);
gicv3_cpuif_virt_irq_fiq_update(cs);
} else {
/* Only need to recalculate if this was previously the best vLPI */
if (irq == cs->hppvlpi.irq) {
gicv3_redist_update_vlpi(cs);
}
}
}
}
void gicv3_redist_process_vlpi(GICv3CPUState *cs, int irq, uint64_t vptaddr,
int doorbell, int level)
{
bool bit_changed;
bool resident = vcpu_resident(cs, vptaddr);
uint64_t ctbase;
if (resident) {
uint32_t idbits = FIELD_EX64(cs->gicr_vpropbaser, GICR_VPROPBASER, IDBITS);
if (irq >= (1ULL << (idbits + 1))) {
return;
}
}
bit_changed = set_pending_table_bit(cs, vptaddr, irq, level);
if (resident && bit_changed) {
if (level) {
/* Check whether this vLPI is now the best */
ctbase = cs->gicr_vpropbaser & R_GICR_VPROPBASER_PHYADDR_MASK;
update_for_one_lpi(cs, irq, ctbase, true, &cs->hppvlpi);
gicv3_cpuif_virt_irq_fiq_update(cs);
} else {
/* Only need to recalculate if this was previously the best vLPI */
if (irq == cs->hppvlpi.irq) {
gicv3_redist_update_vlpi(cs);
}
}
}
if (!resident && level && doorbell != INTID_SPURIOUS &&
(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) {
/* vCPU is not currently resident: ring the doorbell */
gicv3_redist_process_lpi(cs, doorbell, 1);
}
}
void gicv3_redist_mov_vlpi(GICv3CPUState *src, uint64_t src_vptaddr,
GICv3CPUState *dest, uint64_t dest_vptaddr,
int irq, int doorbell)
{
/*
* Move the specified vLPI's pending state from the source redistributor
* to the destination.
*/
if (!set_pending_table_bit(src, src_vptaddr, irq, 0)) {
/* Not pending on source, nothing to do */
return;
}
if (vcpu_resident(src, src_vptaddr) && irq == src->hppvlpi.irq) {
/*
* Update src's cached highest-priority pending vLPI if we just made
* it not-pending
*/
gicv3_redist_update_vlpi(src);
}
/*
* Mark the vLPI pending on the destination (ringing the doorbell
* if the vCPU isn't resident)
*/
gicv3_redist_process_vlpi(dest, irq, dest_vptaddr, doorbell, irq);
}
void gicv3_redist_vinvall(GICv3CPUState *cs, uint64_t vptaddr)
{
if (!vcpu_resident(cs, vptaddr)) {
/* We don't have anything cached if the vCPU isn't resident */
return;
}
/* Otherwise, our only cached information is the HPPVLPI info */
gicv3_redist_update_vlpi(cs);
}
void gicv3_redist_inv_vlpi(GICv3CPUState *cs, int irq, uint64_t vptaddr)
{
/*
* The only cached information for LPIs we have is the HPPLPI.
* We could be cleverer about identifying when we don't need
* to do a full rescan of the pending table, but until we find
* this is a performance issue, just always recalculate.
*/
gicv3_redist_vinvall(cs, vptaddr);
}
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
{
/* Update redistributor state for a change in an external PPI input line */
if (level == extract32(cs->level, irq, 1)) {
return;
}
trace_gicv3_redist_set_irq(gicv3_redist_affid(cs), irq, level);
cs->level = deposit32(cs->level, irq, 1, level);
if (level) {
/* 0->1 edges latch the pending bit for edge-triggered interrupts */
if (extract32(cs->edge_trigger, irq, 1)) {
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 1);
}
}
gicv3_redist_update(cs);
}
void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns)
{
/* Update redistributor state for a generated SGI */
int irqgrp = gicv3_irq_group(cs->gic, cs, irq);
/* If we are asked for a Secure Group 1 SGI and it's actually
* configured as Secure Group 0 this is OK (subject to the usual
* NSACR checks).
*/
if (grp == GICV3_G1 && irqgrp == GICV3_G0) {
grp = GICV3_G0;
}
if (grp != irqgrp) {
return;
}
if (ns && !(cs->gic->gicd_ctlr & GICD_CTLR_DS)) {
/* If security is enabled we must test the NSACR bits */
int nsaccess = gicr_ns_access(cs, irq);
if ((irqgrp == GICV3_G0 && nsaccess < 1) ||
(irqgrp == GICV3_G1 && nsaccess < 2)) {
return;
}
}
/* OK, we can accept the SGI */
trace_gicv3_redist_send_sgi(gicv3_redist_affid(cs), irq);
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 1);
gicv3_redist_update(cs);
}